Related
Hi XDA
This question must have been asked before, but there are SO MANY threads that i cannot find the right answer.
I have root access with my I9000 and flashed 2.5.1.3 recovery mod with ROM MANAGER.
But i cannot reboot in to CWM. it gets in a small recovery screen where i can apply update.zip and wipe etc. but it is not CWM
How can i fix this? i wish to backup my phone with CWM.
when u use vol up + pwr + home button i get the same samsung recovery.
i also did the 3 button fix.
thanks in advance
greetz, Haru
Provide screenshots, that would help others to help you!
haruryu said:
Hi XDA
This question must have been asked before, but there are SO MANY threads that i cannot find the right answer.
I have root access with my I9000 and flashed 2.5.1.3 recovery mod with ROM MANAGER.
But i cannot reboot in to CWM. it gets in a small recovery screen where i can apply update.zip and wipe etc. but it is not CWM
How can i fix this? i wish to backup my phone with CWM.
when u use vol up + pwr + home button i get the same samsung recovery.
i also did the 3 button fix.
thanks in advance
greetz, Haru
Click to expand...
Click to collapse
not sure but u might be having 3:e recovery(U can check it in ur top coloum of ur recovery mode).If this is the case then u need to flash with custom kernel to make it to 2:e recovery and then can access the CWM.
I flashed it using voodoo kernel(it has inbuilt CWM).
As itskapil said provide some ss so other senior members can help u
OK, so I'm using ICS beta 4 for the Streak, and on ROM manager it says I have CWM 3.0.2. But when I try to boot into it, I either get stock recovery or fast boot. When I click on Software upgrade via update.pkg on SD card, on the stock recovery my screen turns blank and I have to hard reset.
Can someone help me get Clockwork Recovery please? Thanks!
PS. I used NVflash to flash ICS, don't know if that helps, but Im trying to provide sufficient information.
ICS B4 comes rooted with SuperUser7 and CWM 4.0.1.4 installed. Don't think that your supposed to use a ROM manager with it. Not sure how you have another CWM version unless you installed it yourself.
Reflash again and don't use the ROM manager app.
OK, well if it came with it, why can I not boot to it. I downloaded ROM manager but never used it. Never installed and other version of CWM, and if I did install another version, wouldn't I be able to see it? I can not boot to CWM.
Thanks for your suggestion, but reflashing is last option. Does anyone else think they know what's going on?
DO NOT USE ROM MANAGER!
First off, CWR isn't working very well right now, I have a new recovery image I've created that adds some functionality to recovery but its still a work in progress.
To get into recovery mode:
1) Power off device
2) Press Power and Volume+, hold
3) You will come into the Dell recovery menu
4) Use Volume (-) to get to "Install Package" and press Power to select
5) You are now in CWR
When I tried that it lagged a second and then booted normally. I'll post a video in a bit.
Oxymorphiend said:
When I tried that it lagged a second and then booted normally. I'll post a video in a bit.
Click to expand...
Click to collapse
Did you use ROM MANAGER and flash a recovery? If you did, recovery is hosed and you will have to fastboot flash the recovery from the B4 directory.
I did use rom manager. And where would I find it in the directory?
Oxymorphiend said:
I did use rom manager. And where would I find it in the directory?
Click to expand...
Click to collapse
Look in your ICS B4 download, you'll see "recovery.img" file.
Thank you both. I finally signed up when I had my first problem, and you guys hooked me up with speedy replies. Much appreciated.
hi
i will remove cwm from my handy.... i will make it original, how can i make it ?
sorry for my bad english
Download the cwm flashable file from here and flash it in cwm.You will have your original recovery back.
Download the stock recovery from HERE and flash it with CWM and you will have original stock recovery.
perfekt
Can I do this proccess with a Sony Xperia??
Enviado desde mi ST23i usando Tapatalk 2
miguelSony said:
Can I do this proccess with a Sony Xperia??
Enviado desde mi ST23i usando Tapatalk 2
Click to expand...
Click to collapse
Not with the files posted here.
Hi! I flashed I8190_stock-recovery-flashable.zip, but Rom Manager still write:
Recovery Setup
Current Recovery: ClockworkMod 6.0.2.7
Whats wrong?
somin.n said:
Hi! I flashed I8190_stock-recovery-flashable.zip, but Rom Manager still write:
Recovery Setup
Current Recovery: ClockworkMod 6.0.2.7
Whats wrong?
Click to expand...
Click to collapse
I don't know about rom manager as I don't really use it. Probably because it was the last known recovery..
Reboot to recovery and have a look..
tys0n said:
I don't know about rom manager as I don't really use it. Probably because it was the last known recovery..
Reboot to recovery and have a look..
Click to expand...
Click to collapse
Thanks for quick reply. It looks that it is there (in fact, I never seen stock recovery before, but now it looks different like cwm), but I can access it only via RomManger... Is there other way how to boot in stock recovery? I can boot in download mode (menu + volume down + power), but in this mode i can't do anything ... :/
edit:
I found [GUIDE] How to reboot in recovery, so maybe it is not only my problem
somin.n said:
Thanks for quick reply. It looks that it is there (in fact, I never seen stock recovery before, but now it looks different like cwm), but I can access it only via RomManger... Is there other way how to boot in stock recovery? I can boot in download mode (menu + volume down + power), but in this mode i can't do anything ... :/
edit:
I found [GUIDE] How to reboot in recovery, so maybe it is not only my problem
Click to expand...
Click to collapse
Good. Yeah, its different, and rommanager isn't compatible with stock recovery. You won't be able to flash anything but samsung-signed updates.
Not able to boot to recovery is well known. Good you found out. Have a look here..http://forum.xda-developers.com/showthread.php?t=2157105 for an easy way to enable three button combination :good:
tys0n said:
Good. Yeah, its different, and rommanager isn't compatible with stock recovery. You won't be able to flash anything but samsung-signed updates.
Not able to boot to recovery is well known. Good you found out. Have a look here..http://forum.xda-developers.com/showthread.php?t=2157105 for an easy way to enable three button combination :good:
Click to expand...
Click to collapse
Hehe, if I set reboot to recovery in RomManger after updating from cwm back to stock recovery, it reboot me in to Stock recovery
Btw, will flashing that 2MB file from "[HOW-TO] Enable Three Button Combo [RECOVERY]" increase binary counter? I know about TriangleAway, but for sure...
And one more question please. My story...
- I flashed pre-rooted 4.1.1 fw via odin
- than i installed RomManger and via it I install CWM
- than become 4.1.2 fw so I flashed this pre-rooted fw via odin - everything was good, phones restart after flash but boot in CWM??? Everything works good, but I was thinking, that with new fw the CWM will gone?!?
Trying to understand how android works (this is my first android phone, before that i had only symbian devices), i read many topic about s iii mini and it looks, that this phone in "unusual" android phone
somin.n said:
Hehe, if I set reboot to recovery in RomManger after updating from cwm back to stock recovery, it reboot me in to Stock recovery
Btw, will flashing that 2MB file from "[HOW-TO] Enable Three Button Combo [RECOVERY]" increase binary counter? I know about TriangleAway, but for sure...
And one more question please. My story...
- I flashed pre-rooted 4.1.1 fw via odin
- than i installed RomManger and via it I install CWM
- than become 4.1.2 fw so I flashed this pre-rooted fw via odin - everything was good, phones restart after flash but boot in CWM??? Everything works good, but I was thinking, that with new fw the CWM will gone?!?
Trying to understand how android works (this is my first android phone, before that i had only symbian devices), i read many topic about s iii mini and it looks, that this phone in "unusual" android phone
Click to expand...
Click to collapse
Yeah, it will let you reboot to recovery but that's all. No flashing, no backups or anything. Kinda sad to install an app just to reboot :silly:
You probably have to use triangle away after that file even though the files are taken out of service-firmware, but it only takes a minute.
These firmwares doesn't normally include recovery..don't know why. Thats what I'm used to from other models, but not for this one.
Hi all,
I want to install CWM on my rooted SGS however there appears to be on CF Kernel that matches my JVN Kernel so using the CF method is not an option from what I have read.
So I installed ROM Manager and tried to install it that way but I now get signature verification errors when I go into Recovery.
Next I downloaded the recovery image from the CWM website but I cannot seem to find any information on installing it onto a SGS.
If anyone could offer any suggestions it would be appreciated.
TIA
Greg
Edit: Firmware is 2.3.3
Why dont you just flash JVU then Root it
Comes with CWM ....
As I am guessing you want CWM to flash a rom yes?
If so most Roms require ...from my knowledge a clean install of JVU with ODIN before flashing a New Rom
ghines said:
Hi all,
I want to install CWM on my rooted SGS however there appears to be on CF Kernel that matches my JVN Kernel so using the CF method is not an option from what I have read.
So I installed ROM Manager and tried to install it that way but I now get signature verification errors when I go into Recovery.
Next I downloaded the recovery image from the CWM website but I cannot seem to find any information on installing it onto a SGS.
If anyone could offer any suggestions it would be appreciated.
TIA
Greg
Edit: Firmware is 2.3.3
Click to expand...
Click to collapse
Download this "update.zip". Place it in your SD card. Power off and boot into recovery with the 3 button combination (press power, volume up and home button till you see the boot logo) and select "apply sdcard: update.zip". DO NOT DELETE THIS FROM SD. You should have CWM installed now. Let me know if you have any problem.
You need to root your phone first with update.zip for i9000, download the latest CWM.zip, put it in the storage. Then go to recovery and install the CWM.zip Goodluck flashing!
EwOkie said:
Why dont you just flash JVU then Root it
Comes with CWM ....
As I am guessing you want CWM to flash a rom yes?
If so most Roms require ...from my knowledge a clean install of JVU with ODIN before flashing a New Rom
Click to expand...
Click to collapse
Can you use any version of JVU? eg: Europe, Asia, Australia. Or, should you only use one for your region, in my case Australia.
I have an Australian verion of JW6 (2.3.6), would that be acceptable?
Download this "update.zip". Place it in your SD card. Power off and boot into recovery with the 3 button combination (press power, volume up and home button till you see the boot logo) and select "apply sdcard: update.zip". DO NOT DELETE THIS FROM SD. You should have CWM installed now. Let me know if you have any problem.
Click to expand...
Click to collapse
Thanks for the UPDATE.ZIP, I note it is just a renamed CWM. I did not know you could just rename them and then install them. Thanks.
So, my plan at this stage is to update to 2.3.6 (JW6) and then install CWM via UPDATE.ZIP. Should this work?
TIA
Greg
Yeah you can upgrade first. Flash a firmware or upgrade OTA. You should root your phone first before flashing a custom recovery such as CWM.
Sent from my GT-I9001 using xda premium
Hi Guys,
I have s3 GT-I9305, android version 4.1.2, baseband version I9305XXBLL5. Australian model for Optus.
I successfully rooted and installed Philz_Touch_6.19.3 _ After that I could do Nandroid online backup and confirm it is rooted.
When I tried to flash custom ROM today - I found I can't boot in CWM/Philz recovery mode. Then I tried to different version of Philz/CWM and TWRP but none worked. It keeps booting in stock recovery mode- I get message as shown in attached image.
PS: I have USB diagnosis checked but haven't unlocked boot loader?
to be specific: my phone works fine - boots fine - It is just I want to load custom rom and it won't go to custom recovery and I can't load custom ROM.
Thanks.
HELP!
can anyone please help me out here!
I kept searching and found some solution but none worked.
I used triangle away. - didn't work
Installed custom recovery without checking auto reset and started after pulling battery out. - didn't work
It still boot in odin mode and I can't go to custom recovery
i have the same problem too when i got my phone flashed 3rd recovery last year,
the stock recovery can automaticly restore itself after reboot~
but i found the solution here in xda,just flash a zip to unlock the self-protection of the stock recovery~
i will tell you the link and the attachment several hours later after my work,if you cannt wait, you can search it here,maybe you can find it yourself.
Sent from my GT-I9305
Aphirodite said:
i have the same problem too when i got my phone flashed 3rd recovery last year,
the stock recovery can automaticly restore itself after reboot~
but i found the solution here in xda,just flash a zip to unlock the self-protection of the stock recovery~
i will tell you the link and the attachment several hours later after my work,if you cannt wait, you can search it here,maybe you can find it yourself.
Sent from my GT-I9305
Click to expand...
Click to collapse
I had a quick search but couldn't find it. Will greatly appreciate if you can post link.
Thanks
even after you flash a custom recovery...your phone will automatically flash stock recovery every time it reboots...so that's why you will get into stock even if you flash CWM/TWRP or what you like.....
here is the solution: http://forum.xda-developers.com/gal...-cf-root-cwm-recovery-ported-supersu-t1914394
read at the end of the first post....WORKAROUND......
i used myself and worked....
ggmm2013123 said:
I had a quick search but couldn't find it. Will greatly appreciate if you can post link.
Thanks
Click to expand...
Click to collapse
the guy offered the post which included the solution.
try to flash the "Remove-boot-recovery.p.zip",it will work..
good luck
:fingers-crossed:
Done
Thanks guys.
Above solution didn't work for me but I got it working through rom manager App. I reboot to recovery through ROM Manager and it worked.
How ever After I installed Pacman rom, I couldn't use App as there were no Gapps and wouldn't boot to recovery. The workaround here was to press home, volume up and lock button simultaneously and release it after few second and it will go to custom recovery.
In the end, I am on Pacman Nightly 06/04/2014 with Philz touch recovery.