Related
I have flashed the uro rom of the galaxy tab on a us sgh-1987 att samsung tab , i inserted my at&t sim card and it will not allow me to make calls . Can some point me in the right direction to fix this. The at&t sim card i am using has voice and data. Or have i not done something properly.
You need to be using a different modem than the one included in the Euro rom. I believe either the Bell Canada or Rogers modems should work to enable voice on ATT. I'm using the Euro JMI rom with the Bell JK5 modem and it works fine for me.
See here: http://forum.xda-developers.com/showthread.php?t=847273
I followed the instructions and for some odd reason the sim that came with my samsung is the only one that will work even though my phone is unlocked and i am using another att sim card that has voice and data.
And when i go to check wireless settings it keeps me me in flight mode.
Using JMIv2 here. Just made a call -- seems fine.
I full flashed JMIv2 over top of JMEv4.
Your not doing something correct.
Also please post in the correct subforum. This in no way has anything to do with android development. This belongs in general. Read much??
Sent from my MoDaCo powered Galaxy Tab.
Pls change the title of your post. It's completely baseless, and it's obvious you did something wrong. Thanks!
mistadman said:
Pls change the title of your post. It's completely baseless, and it's obvious you did something wrong. Thanks!
Click to expand...
Click to collapse
How so? Its clearly a question, he has a question mark after the million exclamation marks...
Sent from zombie infested Gingerbread.
rushstatus1 said:
I have flashed the uro rom of the galaxy tab on a us sgh-1987 att samsung tab , i inserted my at&t sim card and it will not allow me to make calls . Can some point me in the right direction to fix this. The at&t sim card i am using has voice and data. Or have i not done something properly.
Click to expand...
Click to collapse
Weren't you on other threads contradicting people about 3g+ voice using service menus?
I am confused about your setup - what model tab? I thought you had t-mobile tab.
Anyway, on an at&t tab use the bell i9000 modem. Check your apn and network mode afteryou reboot.
The iemi blocking by t-mobile stops people from using data.
And besides clubtech does a perfect write up to get everything working. SEARCH IS YOUR FRIEND.
Good point!
Thank you
i appreciate the advice in pointing me in the right direction. but it seems like a lot of you aren't very newbie knowledge friendly. i posted what i was experiencing in the hopes of getting a point in the right direction. not a solution. turns out my Sim card was corrupted. all i had to do is go and grab a new one. i apologize if my question seemed too basic and trivial to you . but it turns out that i just made a logical investigative approach to my problem . I followed rotos guide to the letter so i assumed that AT&T had also latched on to the idea of imei blocking. I have done several apps for the android market ,and am constantly wanting to learn more . some of you have great skill sets but no patience for new comers. but all in all i will not post in the forum anymore if it involves being downgraded for simply asking for help, isn't this why we have forums for the techs the geeks the cpu nerds. who would have thought amongst intelligent people we still deal with aristocracy .
i did have a t-mobile tab and then returned and bought att tab and it works just fine now . like i said in the forum i am learning so please bear with me
Aristocracy has and will always be common among us nerds blame it on our our societal influences.
Regardless of that, people are more upset about you not searching the forum/threads. Please use the search option , it will save us all time and wasted bandwidth. Also post in the correct sub forum. This section is meant for what it was named for, development only. There is a general/ Q&A section.
Once again, I can't stress the search feature enough. It will seriously help. I promise.
Not flaming you, just trying to help direct you
i appreciate it thank you
hey guys im on roto's v4 and it works for both tmous and att
Last night i was trying to flash a new update on my tab from Kies when horror there was a power cut thus leaving my beloved tab dead. Today i rang samsung support to book a service and during the conversation the agent told me that later this year samsung will release a honeycomb update for the 7 inch tab. At this point i asked how come as from reading threads i was under the impression that this was not going to happen and the only way was through a port from one of the amazing developers like spacemoose1 (cdma) and ssserpentine (gsm) his answer was that samsung wanted to compete with apple even more. has anyone else been told this from samsung ?
corrosion1970 said:
Last night i was trying to flash a new update on my tab from Kies when horror there was a power cut thus leaving my beloved tab dead. Today i rang samsung support to book a service and during the conversation the agent told me that later this year samsung will release a honeycomb update for the 7 inch tab. At this point i asked how come as from reading threads i was under the impression that this was not going to happen and the only way was through a port from one of the amazing developers like spacemoose1 (cdma) and ssserpentine (gsm) his answer was that samsung wanted to compete with apple even more. has anyone else been told this from samsung ?
Click to expand...
Click to collapse
1st of all ... SPACEMOOSE1 work , and no one else include . SSS is porting , collecting , testing , uploading THE GSM port for us thank him , if u saw him comment in anywhere
2nd .. Do U believe this Sh*t for God sakes .. its is impossible to happen !!!!!!! if they want to run with APPLE they should release it now or before ...
WE ARE REACHED THE FINAL STEP ( GINGERBREAD ) perhaps will be (ICECREAM) but honeyComb hell no ...
To The OP .. pls do change your thread Title is not a question , and if you like to keep it here in THE GENERAL SECTION that not suppose to post A Question thread here ...
thanks for sharing
1st the question i am asking is has anyone else been told this from samsung. if you read the post
2nd the honeycombe thread is now split as spacemoose1 and ssserpentine are now working together space doing the cdma release and ssserp doing the gsm so thanks shoould be given to both parties.
corrosion1970 said:
1st the question i am asking is has anyone else been told this from samsung. if you read the post
2nd the honeycombe thread is now split as spacemoose1 and ssserpentine are now working together space doing the cdma release and ssserp doing the gsm so thanks shoould be given to both parties.
Click to expand...
Click to collapse
i referred to ask you to change the title of the thread because this is the general Thread and is not FOR QUESTIONS >>>> so perhaps next time you post thread with Q you should post it in Q|A section ...
spacemoose1 and ssserpentine are now working together space doing the cdma release and ssserp doing the gsm so thanks shoould be given to both parties
Click to expand...
Click to collapse
LMAO ... you should thank both and i didn't say you don't thank SPACEMOOSE1 because she is the Dev ... and pls .. who told you That SSS who is building THE GSM Honeycomb ...
all the respect to my mate (SSS) but he is not who building the HONEYCOMB ... Correct Me If I'm Mistaken !!!
@k0sh Technically, he is building the GSM version, but a majority of it is a port from Spacemoose.
@OP *sigh* Its bull****. Samsung want us to be happy by telling us lies. Read any other Honeycomb for our Tab related thread (no development threads) and you'll know that no device that launched with FroYo (like our Tab) will get Honeycomb. That's straight from Google who can deny any manufacturer the chance to give their devices updates.
It doesn't matter what anyone from Samsung says, Google said 'no'
| Don't Revive Me Bro | Follow me on Twatter
GANJDROID said:
@k0sh Technically, he is building the GSM version, but a majority of it is a port from Spacemoose.
@OP *sigh* Its bull****. Samsung want us to be happy by telling us lies. Read any other Honeycomb for our Tab related thread (no development threads) and you'll know that no device that launched with FroYo (like our Tab) will get Honeycomb. That's straight from Google who can deny any manufacturer the chance to give their devices updates.
It doesn't matter what anyone from Samsung says, Google said 'no'
| Don't Revive Me Bro | Follow me on Twatter
Click to expand...
Click to collapse
Mate i doubt about it .. can you then explain this for me ..
Second, that thread will be managed by ssserpentine. He will also be handling the distribution, packaging and eventually the kernel development for the GSM as well. This way I'm freer to focus on the development of the base rom for both devices. So expect a new thread with a new GSM release to pop up any minute now. ssserpentine will do a good job of getting things out to you, he's super resourceful and dedicated to making HC a more awesome experience.
Click to expand...
Click to collapse
k0sh said:
i referred to ask you to change the title of the thread because this is the general Thread and is not FOR QUESTIONS >>>> so perhaps next time you post thread with Q you should post it in Q|A section ...
LMAO ... you should thank both and i didn't say you don't thank SPACEMOOSE1 because she is the Dev ... and pls .. who told you That SSS who is building THE GSM Honeycomb ...
all the respect to my mate (SSS) but he is not who building the HONEYCOMB ... Correct Me If I'm Mistaken !!!
Click to expand...
Click to collapse
Taken fron ssserpentines honeycomb gsm thread
This is an ALPHA version. There is no 3g, among many other things. Using an alpha rom can be very dangerous. Don't just flash, because you see its HONEYCOMB, read everything very carefully first!
(6/14/11)
After being up way too many hours in a row, and trying to do too many things at once, work on a new kernel has officially begun!
★what's in the oven. .
»new cwr with internal external support.
»1.2ghz
»uc ability
»reliable charging while power is off.
«doubtful, but cross your fingers for lagfix?
(6/13/11) : GSM owners. Alpha 2.5 has arrived!! (No 3g)I highly recommend you start off in FROYO, as coming from GINGERBREAD causes crashes. Use the overcome 1.6 instructions, if you are currently on GB.
But, beware, changing your bootloaders is very dangerous!
*modded build.prop to identify itself as a Samsung Galaxy Tab as GT-P1000. - test runs, not included in cdma release
*modded audiolib to accept dsp manager setting. (more equalizers comming soon) - test runs, not included in cdma release
*what I have planned, and currently in the works.*
* New kernel with 1.2, 1.4 oc
* Flexible scaling
* Attempted lagfix
* New CRW version with internal and external sd support
* SD cart mount upon boot
that is him as i understand it and it looks like he is developing it now
corrosion1970 said:
Taken fron ssserpentines honeycomb gsm thread
This is an ALPHA version. There is no 3g, among many other things. Using an alpha rom can be very dangerous. Don't just flash, because you see its HONEYCOMB, read everything very carefully first!
(6/14/11)
After being up way too many hours in a row, and trying to do too many things at once, work on a new kernel has officially begun!
★what's in the oven. .
»new cwr with internal external support.
»1.2ghz
»uc ability
»reliable charging while power is off.
«doubtful, but cross your fingers for lagfix?
(6/13/11) : GSM owners. Alpha 2.5 has arrived!! (No 3g)I highly recommend you start off in FROYO, as coming from GINGERBREAD causes crashes. Use the overcome 1.6 instructions, if you are currently on GB.
But, beware, changing your bootloaders is very dangerous!
*modded build.prop to identify itself as a Samsung Galaxy Tab as GT-P1000. - test runs, not included in cdma release
*modded audiolib to accept dsp manager setting. (more equalizers comming soon) - test runs, not included in cdma release
*what I have planned, and currently in the works.*
* New kernel with 1.2, 1.4 oc
* Flexible scaling
* Attempted lagfix
* New CRW version with internal and external sd support
* SD cart mount upon boot
that is him as i understand it and it looks like he is developing it now
Click to expand...
Click to collapse
owh that is really great .. glad to see SSS doing hard work ... ..
anyways .. change the thread title or your thread will be moved shortly i guess
k0sh said:
owh that is really great .. glad to see SSS doing hard work ... ..
anyways .. change the thread title or your thread will be moved shortly i guess
Click to expand...
Click to collapse
EDIT : pls do note that this is SPACEMOOSE1 post and not SSS ...
anyways . its not my business who is building it ... just a hint
corrosion1970 said:
Last night i was trying to flash a new update on my tab from Kies when horror there was a power cut thus leaving my beloved tab dead. Today i rang samsung support to book a service and during the conversation the agent told me that later this year samsung will release a honeycomb update for the 7 inch tab. At this point i asked how come as from reading threads i was under the impression that this was not going to happen and the only way was through a port from one of the amazing developers like spacemoose1 (cdma) and ssserpentine (gsm) his answer was that samsung wanted to compete with apple even more. has anyone else been told this from samsung ?
Click to expand...
Click to collapse
I can't swallow that agent's speech, although i'd wish for it to be genuine.
Sammy has quite a history for letting its customers down, either by delays or no updates at all.
Sҡȳᴪʌɩҡͼṟ said:
I can't swallow that agent's speech, although i'd wish for it to be genuine.
Sammy has quite a history for letting its customers down, either by delays or no updates at all.
Click to expand...
Click to collapse
+1 ... Samsung said . we gonna have galaxy tab 10.1 for free only for the galaxy tab 7.1 owners ... do you believe this Sh*t ? hahaha , just rumors i made
GANJDROID said:
@k0sh Technically, he is building the GSM version, but a majority of it is a port from Spacemoose.
@OP *sigh* Its bull****. Samsung want us to be happy by telling us lies. Read any other Honeycomb for our Tab related thread (no development threads) and you'll know that no device that launched with FroYo (like our Tab) will get Honeycomb. That's straight from Google who can deny any manufacturer the chance to give their devices updates.
It doesn't matter what anyone from Samsung says, Google said 'no'
| Don't Revive Me Bro | Follow me on Twatter
Click to expand...
Click to collapse
Can you please direct me to a source which says that Google said no existing Froyo devices can be updated to HoneyComb? I honestly don't remember any such official statement from Google!
Pat123 said:
Can you please direct me to a source which says that Google said no existing Froyo devices can be updated to HoneyComb? I honestly don't remember any such official statement from Google!
Click to expand...
Click to collapse
I don't have it bookmarked but itbwas about a few weeks after they released the SDK.
| Don't Revive Me Bro | Follow me on Twatter
Pat123 said:
Can you please direct me to a source which says that Google said no existing Froyo devices can be updated to HoneyComb? I honestly don't remember any such official statement from Google!
Click to expand...
Click to collapse
Ill try and dig up the link, but do a search its posted somewhere here on the forums, and their reasoning behind it is;
they don't want 39 million china tablets coming out and giving honeycomb a bad name.
I ran into this problem the other day, someone at uni had a 7inch china tablet with froyo and everyone was talking about how **** android must be
i had to pull out my device and be like, nawwwwwwww.
Majority of people are retards and it only takes one china device to give android a bad name
Can someone please help hm or point me to a thread avout Rooting the Galazx 10.1 on a Mac. I now this is a noov question, but I am a noob to this. I have had bothe hrc 4g and now I have the evo 3g and have gotten both those roooted, but cant see to find any clear cut insturctions fot the Galaxy, Thanks for the help
maybe try asking in the galaxy tab 10.1 section of XDA. i think they would know more about rooting that
How come all the developers are focusing on the gsm and cdma models. Is there anyway to get a master thread focusing on the p1010 model. I think it is about time for the wifi only model to get roms or at least a overclocking mod. Im pretty sure i checked everywhere so if anyone knows about any GT roms for the wifi models i will greatly appreciate it.
+ 1 in here.
For those student with limited budget. P1010 is a great device for those who arent rich~
Perhaps the real solutions would be a separate subforum for the p1010, so its impossible to ignore?
+1 here.
GALAXY TAB P1010 OWNERS UNITE!
CALLING ALL GALAXY TAB DEVS, PLEASE HELP US OUT, just 1 port from the gt p1000 to take us away from stock nastiness! PLEASE HELP!
Sent from my GT-P1010 using xda premium
You have my sword.
Samsung pretty much abandoned the PT1010. The looming GTab7+ puts another nail in the coffin for this model.
The Devs are our last hope.
even my old htc magic got gingerbread already
+1
Please tell us what you need to start developing. I mean Cyanogen even works for Samsung...
P1010 model employs different hardware, hence different drivers... If someone were to donate a p1010 device to the devs there would be more chance of rom developement however most of the devs have the p1000. This is why there are a heap of p1000 GSM roms,not so many CDMA roms & no real developement of wireless only roms...
Sorry, but the rule is supply and demand - there are a heap of p1000 users and not enough p1010 users. Most devs got a tab right off the bat so the p1010 users have no devs available...
Donate??
ultramag69 said:
If someone were to donate a p1010 device to the devs there would be more chance of rom developement
Click to expand...
Click to collapse
By donating, do you mean that I need to physically give it to a dev, or can I allow it to be used for testing while still keeping it with myself.
If it means i need to give it physically, then I need to know if there are any devs around New Delhi, India. I would be willing to buy a new one and lend it, or do the testing myself.
I am not an engineer, but I was able to root my I9000 using Heimdall and install MIUI on the same. I think I will be able to test as well.
Ski3high. said:
How come all the developers are focusing on the gsm and cdma models. Is there anyway to get a master thread focusing on the p1010 model. I think it is about time for the wifi only model to get roms or at least a overclocking mod. Im pretty sure i checked everywhere so if anyone knows about any GT roms for the wifi models i will greatly appreciate it.
Click to expand...
Click to collapse
I may be pulling a dead thread but there is someone working on CWM and CM7, then Cm9 I believe, in the development section. Name is motafoca and he already has working CWM and almost finished CM7. There's still one dev who cares about us!
Sent from my GT-P1010 using Tapatalk
This is the title given by Spring: Samsung Epic Touch 4g
Model number is SPH-D710 Firmware D710. Is this a 9100G? or a 9100?
I want to root this for my girlfriend so she can get free hotspot for her new tablet
If anyone could just guide me to the direct spot of directions to rooting her phone, i would appreciate. Since this is not my phone I don't want to experiment, I just want to get down to the point, just want to get it rooted and be done with it.
Thank you
hey gotgohan
the phone you have is neither i9100 or i9100g because you don't have samsung galaxy s2 but epic touch 4g.so refer here link: http://forum.xda-developers.com/forumdisplay.php?f=1281
And seeing this isn't a development thread and an answer is given, I'm closing this up.