Database Develop

Can´t conect with pc S5830 pls. help

Hi, I have many S5830 phonesbut now on one from that I have problem, whan I put cable in pc is not on phone icon USB and pc tell me problem with conect... Other phones not have problem with conect so can You help me? Can I flash stock firmware by stock CWM (how) and delete this error from phone? I have wiped factory reset but always same problem.
MY PHONE WRITE IN THE LEFT DOWN ON DISPLAY : SAVE MODE....??? What is it?
Thanks so much

Can I flash Stock Firmware via Stock CWM : download md5 file with Stock Rom for and flash by Apply Update From SDcard???
Thanks

Paul Koty said:
Can I flash Stock Firmware via Stock CWM : download md5 file with Stock Rom for and flash by Apply Update From SDcard???
Thanks
Click to expand...
Click to collapse
NEVER!! you can try flashing a custom rom, maybe It's your own rom bug
Which rom are you using?
Enable USB debug in settings and reinstall samsung drivers in your pc or try changing the USB port then boot in download mode to flash a fresh stock via Odin
ummm you can try mobile odin, several members posted that works fine

Viper The Ripper said:
Never
Click to expand...
Click to collapse
Thanks, so now I am in ...
Becazuse I have rooted, flashed custom cwm and Custom Rom. Not change... Always I can´t connect with pc. ..
You have any idea what happend?
Always if I put cable to phone, normal can charging battery, but not connecting

Paul Koty said:
Thanks, so now I am in ...
Becazuse I have rooted, flashed custom cwm and Custom Rom. Not change... Always I can´t connect with pc. ..
You have any idea what happend?
Always if I put cable to phone, normal can charging battery, but not connecting
Click to expand...
Click to collapse
Try enabling USB debug in settings, reinstall drivers in your pc check they work and that the pins of your cable are working properly, Is posible to try with a friend's cable?
Here it is modded mobile odin just in case you can't conect your phone to your pc
http://forum.xda-developers.com/showthread.php?t=2029180

Viper The Ripper said:
Try enabling USB debug in settings, reinstall drivers in your pc check they work and that the pins of your cable are working properly, Is posible to try with a friend's cable?
Click to expand...
Click to collapse
Usb debug Enable. Drivers for other phones s5830 (I have 3pcs) are good, cable used 3 other pcs...
EDIT:
DONE! Was USB conector little bit curved.. Knife is my friend now

Paul Koty said:
Usb debug Enable. Drivers for other phones s5830 (I have 3pcs) are good, cable used 3 other pcs...
Click to expand...
Click to collapse
You don't need the other phone's drivers YOU NEED THE SPECIFIC GALAXY ACE DRIVERS!!

Viper The Ripper said:
You don't need the other phone's drivers YOU NEED THE SPECIFIC GALAXY ACE DRIVERS!!
Click to expand...
Click to collapse
Oh man, I don´t know all but I am not idiot too much. I have many GALAXY ACE´s S5830 phones man.

Paul Koty said:
Oh man, I don´t know all but I am not idiot too much. I have many GALAXY ACE´s S5830 phones man.
Click to expand...
Click to collapse
I didn't say that but you could write better to avoid confusions that's all, I try to help you but I need to understand exactly what you mean so...
Well I'm glad you found the solution

Viper The Ripper said:
I didn't say that but you could write better to avoid confusions that's all, I try to help you but I need to understand exactly what you mean so...
Well I'm glad you found the solution
Click to expand...
Click to collapse
No problem man :good: You are one from who want to always help me. Thanks :good:

please help me!

hi
i tried to install jetmod 3 but my i9070 stopped at 20%
then i restared the phone it only shows the recovery mode
and it says : there is no os installede .
what should i do ?
help please

Jetmod is for GingerBread if i remember right.
What baseband do you have before starting to install?
Powered by CM10.2

R_a_z_v_a_n said:
Jetmod is for GingerBread if i remember right.
What baseband do you have before starting to install?
Powered by CM10.2
Click to expand...
Click to collapse
i was running on sami os
now i cant open my device
it says : there is no OS
can my i9070 be repared ??

koko_john98 said:
i was running on sami os
now i cant open my device
it says : there is no OS
can my i9070 be repared ??
Click to expand...
Click to collapse
It can. Download your stock firmware from samsung-updates.com, flash it with Odin.
Just be carefull, do not install P version of firmware if you have I9070 - and do not install NON-P version if you have I9070P.

Flash a jb firmware using Odin
Sent from Italy using Tapatalk

i tried to put the usb on the computer but computer says : hardware may not work probably

koko_john98 said:
i tried to put the usb on the computer but computer says : hardware may not work probably
Click to expand...
Click to collapse
Go to download mode, by powering it on with VolumeDown+Home+Power.

I went to download mode but the problem is the computer does not recognize my i9070

koko_john98 said:
I went to download mode but the problem is the computer does not recognize my i9070
Click to expand...
Click to collapse
You need usb drivers: http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows

I9070 can't connect via USB after flashing rom:I9070XXLQG_I9070PRTLQ1_HOME

Hi guys,
I've successfully flashed today rom I9070XXLQG_I9070PRTLQ1_HOME (polish play). I was planning to send my phone on guarancy repair so they can clean dusted camera but I've lost my guarancy card so all that was for nothing anyway I've noticed that after flashing this rom I can't connect my phone via USB - phone is charging but doesn't show that my device was connected.
Tried reinstalling samsung drivers and few other fixes searched on google like turning off device, pluging the cable and then turning it on but without any effect.
I've managed to root device and install CM10.2 but it didn't fix the problem (I've copied files on memory card on another phone).
Anyone faced similar problem and know how to fix it?
Thanks in advance
All the best.

Peruner said:
Hi guys,
I've successfully flashed today rom I9070XXLQG_I9070PRTLQ1_HOME (polish play). I was planning to send my phone on guarancy repair so they can clean dusted camera but I've lost my guarancy card so all that was for nothing anyway I've noticed that after flashing this rom I can't connect my phone via USB - phone is charging but doesn't show that my device was connected.
Tried reinstalling samsung drivers and few other fixes searched on google like turning off device, pluging the cable and then turning it on but without any effect.
I've managed to root device and install CM10.2 but it didn't fix the problem (I've copied files on memory card on another phone).
Anyone faced similar problem and know how to fix it?
Thanks in advance
All the best.
Click to expand...
Click to collapse
Turn on usb debugging in developer options. You might need to tap 7 times on rom version in About phone to get dev options.
Sent from my GT-I9070 using Tapatalk

shut_down said:
Turn on usb debugging in developer options. You might need to tap 7 times on rom version in About phone to get dev options.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Hi,
Thanks for fast reply,
I've tried that already - doesn't change anything.
Also phone is not visible in download mode.

I'd try:
- another usb cable
- another usb port (avoid hubs)
- another PC
- fresh system install
- another rom like anything stock based or cm10.1 maybe
what happens on your PC when you enter CWM and plug an usb cable

adamuadamu said:
I'd try:
- another usb cable - checked
- another usb port (avoid hubs) checked
- another PC checked
- fresh system install - tried on another PC..
- another rom like anything stock based or cm10.1 maybe - installed CM 10.2 hoping that it will fix the issue but problem still occurs
what happens on your PC when you enter CWM and plug an usb cable
Click to expand...
Click to collapse
absolutely nothing..no prompting windows with "installing driver"

Peruner said:
absolutely nothing..no prompting windows with "installing driver"
Click to expand...
Click to collapse
ok, anything happens in device manager, any new unrecognized devices shown there?

i have also had this problem from quiet some time and it happens with almost every rom for me:crying:
and temporary fix is
1) go to devices and printer(u will have ur device over there by its original name or as an storage device)
2)right click on ur device icon
3)select troubleshoot after some time it will ask u to apply fix
give permission after that it will install ur drivers once again n ur problem will be solved for a FEW DAYS

Hi again,
Thanks guys for your reply.
 @kunal19911 - sorry not working, my device is not visible at all anywhere
@adamuadamu as above - no unknown devices in device manager.

Peruner said:
Hi again,
Thanks guys for your reply.
@kunal19911 - sorry not working, my device is not visible at all anywhere
@adamuadamu as above - no unknown devices in device manager.
Click to expand...
Click to collapse
Have you tried to reboot phone. My phone gets like that when I charge it with wall charger, and can't be recognised by pc untill reboot. I forgot to tell you that.
Sent from my GT-I9070 using Tapatalk

shut_down said:
Have you tried to reboot phone. My phone gets like that when I charge it with wall charger, and can't be recognised by pc untill reboot. I forgot to tell you that.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Yep, I've tried - many times - as written before tried to plug in in download mode - also no effect.
I've never had this problem before, is there any way I could flash new rom without estabilishing USB connection?

Peruner said:
Yep, I've tried - many times - as written before tried to plug in in download mode - also no effect.
I've never had this problem before, is there any way I could flash new rom without estabilishing USB connection?
Click to expand...
Click to collapse
Huh, from CM10.2 you need to do it with Odin. Or to repartition preload partition. But I do not know how to do it.
Sent from my GT-I9070 using Tapatalk

shut_down said:
Huh, from CM10.2 you need to do it with Odin. Or to repartition preload partition. But I do not know how to do it.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
AFAIK no need to repartition, but it's enough to format /preload (in CWM go to advanced - format /preload). at least worked for me when leaving 4.3 and 4.4 roms.

y dont u try flashing any other cm10.2 based rom with cwm?

The thing is that I don't have this issue because of CM 10.2.
It was cause since I've flashed stock ROM listed in the topic.
Flashing CM10.2 was a desparate try to fix it, after rooting stock rom, flashing cocore kernel didn't help.

Peruner said:
The thing is that I don't have this issue because of CM 10.2.
It was cause since I've flashed stock ROM listed in the topic.
Flashing CM10.2 was a desparate try to fix it, after rooting stock rom, flashing cocore kernel didn't help.
Click to expand...
Click to collapse
Then only thing coming to my mind is some hardware problem...

Ok guys thanks for all answers.
Yesterday my phone got discharged and doesn't want to charge anymore.
I'll bring it to mobile repairs.
Cheers

Peruner said:
Ok guys thanks for all answers.
Yesterday my phone got discharged and doesn't want to charge anymore.
I'll bring it to mobile repairs.
Cheers
Click to expand...
Click to collapse
USB connector on your phone, 99% hardware problem...

Samsung Galaxy S Gt-I9000 usb problem!

Hello! I have a I900 and i installed Mackay kernel ICS Final Rom and fail.Phone enter in download mode,problem is the pc who doesn't recognize my phone...i install and reinstall the Samsung drivers but still dont recognize! Help me please!

Try a different USB port

pryerlee said:
Try a different USB port
Click to expand...
Click to collapse
still dont recognize

Any solution?

Boot into recovery then ''fix permissions''

pryerlee said:
Boot into recovery then ''fix permissions''
Click to expand...
Click to collapse
dont enter in recovery

Please help me guys

Need Help !!!

hi i acccidently fully wiped my note 5's internal memory and im stuck in TWRP recovery and i can't flash odin frimware because the usb of the device is dead it only charge no data so i can't flash odin,sideload zip and use usb OTG
so please if there is any solution help me
thank you
update :
i changed USB but still not working is there a chance that new usb port is broken also ? or there is another problem

LOtFiViruS said:
hi i acccidently fully wiped my note 5's internal memory and im stuck in TWRP recovery and i can't flash odin frimware because the usb of the device is dead it only charge no data so i can't flash odin,sideload zip and use usb OTG
so please if there is any solution help me
thank you
Click to expand...
Click to collapse
As long as your USB data is broken you are out of luck my friend.

update :
i changed USB but still not working is there a chance that new usb port is broken also ? or there is another problem

LOtFiViruS said:
update :
i changed USB but still not working is there a chance that new usb port is broken also ? or there is another problem
Click to expand...
Click to collapse
motherboard is dead

LOtFiViruS said:
hi i acccidently fully wiped my note 5's internal memory and im stuck in TWRP recovery and i can't flash odin frimware because the usb of the device is dead it only charge no data so i can't flash odin,sideload zip and use usb OTG
so please if there is any solution help me
thank you
update :
i changed USB but still not working is there a chance that new usb port is broken also ? or there is another problem
Click to expand...
Click to collapse
Maybe u should try to flash the stock firmware using odin..