Hi guys my name is Alberto, and I decided to write here asking some help.
First of all, I have done every method I have find here in this page and other ones, with no success...
So I am a little desperated, this is my story:
I decided to root my phone and flash it with CGM 7.2. Everything went as expected, but in a pair of days it hung twice. I did not like it so i decided to reflash it, thinking I could have done something wrong. But when I did that, after wipping data etc the phone got reboot loop.
I've tried LG Esteem, scripts found online, SmartFlash tool (http://forum.xda-developers.com/showthread.php?t=1448803) but always the same thing: LG's screen and lighting buttons forever.
I cannot use ADB because is not recogniced by my PC. I can only SW UPGRADE pressing V+ while I connect it to my PC.
I have tried to upgrade to official version, but got the same rebootloop. After that, something curious happened: I went to bed, and when I woke up tried to turn it on AND WORKED...the unpacking android image was there and i was able to set up the phone. ¿?
My problem with this method -> http://forum.xda-developers.com/showthread.php?t=1448803 is it gets rebootloop and does not make Factory Reset.
I do not know what to do now... I can upgrade to Official Gingerbread, but I have no guarantee of avoid rebootloop...
Could you please help me?
Thx a lot!
Greetings
Did you use the right bin and fls files while using smart flash?
And regarding cm7, I too suffered frequent hangs and random boots.. Switched over to Boype's modded cm7, and barely did I get any hangs
Sent from my LG Optimus Black
Vivek_Vivek said:
Greetings
Did you use the right bin and fls files while using smart flash?
And regarding cm7, I too suffered frequent hangs and random boots.. Switched over to Boype's modded cm7, and barely did I get any hangs
Sent from my LG Optimus Black
Click to expand...
Click to collapse
Hi Vivek,
I used this:
stock ROM V10A EEU XXX with .bin & .fls. [CRC MD5: d880b8834400575b5827bafbf29a745e] - DepositFiles, FileServe, WUpload.
the same that radkor uses right here -> http://forum.xda-developers.com/showthread.php?t=1448803
and another one that I, following another guide, found here http://lg-phone-firmware.com/index.php?id_mod=1
291 ORE/ORANGE(SPAIN)
So I will try Boype's modded cm7 when I get rid of this problem... :crying:
I'm not very sure with that froyo rom :sly: Why don't you flash stock GB through smart flash?
Sent from my LG Optimus Black
Vivek_Vivek said:
I'm not very sure with that froyo rom :sly: Why don't you flash stock GB through smart flash?
Sent from my LG Optimus Black
Click to expand...
Click to collapse
I have right now official's GB Rom in my phone.
I have run B2C with Recovery & Emergency mode, so I have 2.3.4 GB installed, but my phone keeps on bootlooping...
Do not know what to do! :S
Are you using the touch version of Clockworkmod recovery? I have a case before always got bootloop and it takes an hour to boot my phone because of the touch version of CWM recovery.
Try smartflashtool with patched v20 (root and cwm injected)
http://forum.xda-developers.com/showthread.php?p=26983245
Mr. Dimples said:
Are you using the touch version of Clockworkmod recovery? I have a case before always got bootloop and it takes an hour to boot my phone because of the touch version of CWM recovery.
Click to expand...
Click to collapse
I used both of them, touch and buttons... :S next time I will not use touch version thx for your advice!
You may try this method to solve your problem.
1st
Download gingerbread ROM here http://lg-phone-firmware.com/index.php?mod=Lg+Optimus+Black&paese=Tutti&id_mod=1 (Latest gingerbread rom is V20S Spain)
2nd
Use this method http://forum.xda-developers.com/showthread.php?p=30980809#post30980809to convert kdz to bin/fls to be able to flash the ROM using smartflash. (see post number 121 it's on page 13 for the tutorial on 2.1 converter) I suggest use NORMAL CWM!
3rd
After the convertion flash it using smartflash tool.
ramrod said:
Try smartflashtool with patched v20 (root and cwm injected)
http://forum.xda-developers.com/showthread.php?p=26983245
Click to expand...
Click to collapse
Mr. Dimples said:
You may try this method to solve your problem.
1st
Download gingerbread ROM here http://lg-phone-firmware.com/index.php?mod=Lg+Optimus+Black&paese=Tutti&id_mod=1 (Latest gingerbread rom is V20S Spain)
2nd
Use this method http://forum.xda-developers.com/showthread.php?p=30980809#post30980809to convert kdz to bin/fls to be able to flash the ROM using smartflash. (see post number 121 it's on page 13 for the tutorial on 2.1 converter) I suggest use NORMAL CWM!
3rd
After the convertion flash it using smartflash tool.
Click to expand...
Click to collapse
Thx for your quick replies!
I have done what your said:
1. Download V20G_00.kdz
2. Used LG-P970 ROM COVERTER 2.1 to get '.fls' and .'bin' files
3. Used B_SmartFlashTool_Extern to flash those files. I have removed battery, SIM & SD cards from the phone. I have connected to my PC with V+ and got the SW UPGRADE text. Run SmartFlash and get this log:
Code:
00:00.0 Sec :Download Start...
00:02.0 Sec :RomBinary Download start
00:02.1 Sec :PSI RAM writing start
00:02.1 Sec :Trying to communicate with IFX modem
00:07.1 Sec :Confirm IFX communication
00:07.1 Sec :PSI RAM writing end
00:07.1 Sec :Start PSI RAM
00:07.1 Sec :EBL writing start
00:23.3 Sec :Start EBL
00:23.3 Sec :Set capabilities to be used
00:24.3 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:24.4 Sec :Set flash ID complete
00:24.4 Sec :Set Infineon CFI Information 1
00:24.4 Sec :Set Infineon CFI Information 2
00:24.4 Sec :PSI Download start
00:24.5 Sec :Set FLASH address
00:24.7 Sec :PSI Download success
00:24.7 Sec :SLB Download start
00:24.8 Sec :Set FLASH address
00:26.2 Sec :SLB Download success
00:26.2 Sec :Aeneas Download start
00:26.8 Sec :Erase was executed rightly!
00:27.1 Sec :Set FLASH address
00:29.8 Sec :Aeneas Download success
00:29.8 Sec :Code Download start
00:30.2 Sec :Erase was executed rightly!
00:30.4 Sec :Set FLASH address
01:38.0 Sec :Code Download success
01:38.0 Sec :EMMC writing start
01:38.0 Sec :Success to erase
01:38.0 Sec :Partition size is 128 KBytes
01:38.5 Sec :Success to erase
01:38.5 Sec :Partition size is 128 KBytes
01:39.0 Sec :Success to erase
01:39.0 Sec :Partition size is 384 KBytes
01:39.1 Sec :Success to erase
01:39.2 Sec :Partition size is 4992 KBytes
01:40.5 Sec :Success to erase
01:40.5 Sec :Partition size is 5248 KBytes
01:41.9 Sec :Partition size is 0 KBytes
01:41.9 Sec :Success to erase
01:41.9 Sec :Partition size is 2048 KBytes
01:42.4 Sec :Partition size is 0 KBytes
01:42.5 Sec :Success to erase
01:42.5 Sec :Partition size is 412800 KBytes
03:06.6 Sec :Partition size is 0 KBytes
03:06.6 Sec :Partition size is 0 KBytes
03:06.6 Sec :Partition size is 0 KBytes
03:06.6 Sec :Success to erase
03:06.6 Sec :Partition size is 128 KBytes
03:06.6 Sec :Partition size is 0 KBytes
03:06.6 Sec :RomBinary Download success
03:06.6 Sec :Target is resetting
03:06.6 Sec :Download complete
I cannot see anything wrong in there.......
Now I have my phone in LG screen with softkeys blinking but nothing else...
Any suggestions? thx a lot!
Hmmm... Reinstall your phone drivers on the pc, and try with other USB ports...
And sometimes, the first boot after the flash takes a while... Wait for upto 15mins,if it still doesn't complete the boot, we'll have to think of something else...
Sent from my LG Optimus Black
It also happened to me after flashing. It takes an hour to boot. What i did is i removed the battery and leave the phone. After 2-3 hrs i tried to turn it on and then it boot. The next time i go into recovery the bug has gone. I can easily reboot my phone now. I made an experiment and use again the touch version of cwm and the bug came back.
sr_naranja19 said:
Thx for your quick replies!
I have done what your said:
1. Download V20G_00.kdz
2. Used LG-P970 ROM COVERTER 2.1 to get '.fls' and .'bin' files
3. Used B_SmartFlashTool_Extern to flash those files. I have removed battery, SIM & SD cards from the phone. I have connected to my PC with V+ and got the SW UPGRADE text. Run SmartFlash and get this log:
I cannot see anything wrong in there.......
Now I have my phone in LG screen with softkeys blinking but nothing else...
Any suggestions? thx a lot!
Click to expand...
Click to collapse
How about trying a different version, plus injecting CWM? Then phone reboots directly into CWM, make factory reset, wipe dalvic, flash superuser.zip, reboot and have fun ^^:victory:
Vivek_Vivek said:
Hmmm... Reinstall your phone drivers on the pc, and try with other USB ports...
And sometimes, the first boot after the flash takes a while... Wait for upto 15mins,if it still doesn't complete the boot, we'll have to think of something else...
Sent from my LG Optimus Black
Click to expand...
Click to collapse
It's been 25 mins blinking... so I will wait an hour! xDDD!
Yeah try another version. I use V20F singapore before. You can try it.
Mr. Dimples said:
It also happened to me after flashing. It takes an hour to boot. What i did is i removed the battery and leave the phone. After 2-3 hrs i tried to turn it on and then it boot. The next time i go into recovery the bug has gone. I can easily reboot my phone now. I made an experiment and use again the touch version of cwm and the bug came back.
Click to expand...
Click to collapse
I think that has happened to me too. I going to wait an hour to check if that is the answer...
sr_naranja19 said:
It's been 25 mins blinking... so I will wait an hour! xDDD!
Click to expand...
Click to collapse
something's wrong with the rom files I think... Try flashing the patched stock GB rom, which has cwm touch in it... You'll boot into recovery right after the flash... Later just flash a cwm button version and hopefully that should solve your problem :thumbup:
Ps: have a zip of SU in ur card... Flash it soon as ur in recovery to avoid hassles
Sent from my LG Optimus Black
N00BY0815 said:
How about trying a different version, plus injecting CWM? Then phone reboots directly into CWM, make factory reset, wipe dalvic, flash superuser.zip, reboot and have fun ^^:victory:
Click to expand...
Click to collapse
Mr. Dimples said:
Yeah try another version. I use V20F singapore before. You can try it.
Click to expand...
Click to collapse
I kinda noob with this... can I use different versions from another countries?
Which of these would you recommend me to try? -> http://lg-phone-firmware.com/index.php?id_mod=1
Look out for the patched GB rom at xda mate... Download it n flash it.. Doesn't matter which country you are in it will work regardless of that
Sent from my LG Optimus Black
sr_naranja19 said:
I kinda noob with this... can I use different versions from another countries?
Which of these would you recommend me to try? -> http://lg-phone-firmware.com/index.php?id_mod=1
Click to expand...
Click to collapse
Yes you can! Except the korean version! Try V20F singapore some people say it has good battery life, or the latest version V20S Spain.
But custom ROM's is the best like Zeus, Noa, Supressed, CM7 and more. After solving your problem in bootloop you can try those custom rom. Step by step you can learn it. Just read some guide and i will tell you this! You will enjoy it promise!
Related
Hey guys,
So I was in the process of doing a battery test on the v10E ROM as LG had prompted me but as with my last 2x handset, it simply got stuck or hung while flashing the new firmware as it had a problem with communicating with my PC. I seriously think something's wrong with their update tool. Now, I can boot into CWM, can I restore my system back?
I have tried wiping data/factory reset, as well as wipe cache partition, then restoring a backup as well as installing the update.zp file (CM nightly#149) and still it would boot up to the S/W upgrade screen. Is there anything I can do via CWM or do I have to use smartflash?
Guess you already have tried but remove the battery and let it be with out it for 10 sec.
Try smartflash, nvflash.
Never had that problem my self so far. Just mentioned my way to try and fix it.
lintz said:
Guess you already have tried but remove the battery and let it be with out it for 10 sec.
Try smartflash, nvflash.
Never had that problem my self so far. Just mentioned my way to try and fix it.
Click to expand...
Click to collapse
Yeah I have actually. I'm going to use smartflash to restore my original ROM and baseband. By the way, when you upgrade using the LG tool, does it hang on you? It hung on my v10d firmware.
Soulj4h said:
Yeah I have actually. I'm going to use smartflash to restore my original ROM and baseband. By the way, when you upgrade using the LG tool, does it hang on you? It hung on my v10d firmware.
Click to expand...
Click to collapse
Never happened to me, but I've heard of it, and they usually used a USB-hub or had flaky front-panel connectors (or overclocked PCs, FSB also affects USB-controllers.) Connect USB directly to the motherboard.
(I've used the LG update tool quite a lot, never had any problems with it, but then again I always smartflash back to stock before updating anything.)
Crap, I'm getting various timeout errors on Smartflash. What do I do?
Soulj4h said:
Crap, I'm getting various timeout errors on Smartflash. What do I do?
Click to expand...
Click to collapse
That's normal. Just close the window, wait a few seconds until the main windows lists a com-port and driver (under "communication setup") and press start again. May have to try a few times before it'll work.
TrymHansen said:
That's normal. Just close the window, wait a few seconds until the main windows lists a com-port and driver (under "communication setup") and press start again. May have to try a few times before it'll work.
Click to expand...
Click to collapse
Ok the .fls flashed successfully.
Code:
00:00.0 Sec :Download Start...
00:02.0 Sec :RomBinary Download start
00:02.0 Sec :PSI RAM writing start
00:02.0 Sec :Trying to communicate with IFX modem
00:07.2 Sec :Confirm IFX communication
00:07.2 Sec :PSI RAM writing end
00:07.2 Sec :Start PSI RAM
00:07.2 Sec :EBL writing start
00:26.7 Sec :Start EBL
00:26.8 Sec :Set capabilities to be used
00:26.9 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:27.0 Sec :Set flash ID complete
00:27.6 Sec :Set Infineon CFI Information 1
00:27.6 Sec :Set Infineon CFI Information 2
00:27.6 Sec :PSI Download start
00:27.9 Sec :Set FLASH address
00:29.3 Sec :PSI Download success
00:29.3 Sec :SLB Download start
00:29.6 Sec :Set FLASH address
00:33.2 Sec :SLB Download success
00:33.2 Sec :Aeneas Download start
00:33.8 Sec :Erase was executed rightly!
00:34.0 Sec :Set FLASH address
00:40.2 Sec :Aeneas Download success
00:40.2 Sec :Code Download start
00:40.5 Sec :Erase was executed rightly!
00:40.8 Sec :Set FLASH address
02:54.8 Sec :Code Download success
02:54.8 Sec :RomBinary Download success
02:56.8 Sec :Download complete
Soulj4h said:
Ok the .fls flashed successfully.
Click to expand...
Click to collapse
I was under the impression you were trying to flash back to another ROM? If that's the case you need to flash the .bin file as well (AP bin.)
TrymHansen said:
I was under the impression you were trying to flash back to another ROM? If that's the case you need to flash the .bin file as well (AP bin.)
Click to expand...
Click to collapse
I first flashed the .fls file first, then I flashed the .bin file, which came out as a success. I'm not back in business.
Code:
00:00.0 Sec :Download Start...
00:02.0 Sec :RomBinary Download start
00:02.0 Sec :Num of partitions are 7
00:11.2 Sec :Partition download complete.
00:11.4 Sec :Partition download complete.
00:11.8 Sec :Partition download complete.
01:31.4 Sec :Partition download complete.
01:34.1 Sec :Partition download complete.
01:39.2 Sec :Partition download complete.
03:19.3 Sec :Partition download complete.
03:19.3 Sec :RomBinary Download success
03:21.3 Sec :Download complete
Soulj4h said:
I first flashed the .fls file first, then I flashed the .bin file, which came out as a success. I'm not back in business.
Click to expand...
Click to collapse
Good. (I assume by "not" you mean "now" ;-))
TrymHansen said:
Good. (I assume by "not" you mean "now" ;-))
Click to expand...
Click to collapse
Lol, stupid keyboard. Yes I meant 'now'. Any idea why the timeouts occur because truth be told, it occurs in the official LG software as well.
Soulj4h said:
Lol, stupid keyboard. Yes I meant 'now'. Any idea why the timeouts occur because truth be told, it occurs in the official LG software as well.
Click to expand...
Click to collapse
No idea, sorry.
I heard it was because of inconsistent drivers by LG.
*Beats chest and begins battlecry
Finally found the combination which makes the LG updater tool work with the driver file . I'm now on v10e to do my testing.
i'm using su660. I used cm9 cook rom, but I see it no stability, so I had to reflash stock rom. And from this time, i have some problems: baseband unknown,battery 999%,wifi error. I try to flash by smart flash,but just flash success file .bin, file .fls always says " error". I have tried on multiple computers,win7,xp sp3 but the same error occurred:
Trying to communicate with IFX modem, and then - timeout error.
I tried with nvflash but that situation still exists.
What can I do to fix it?
wintersky said:
i'm using su660. I used cm9 cook rom, but I see it no stability, so I had to reflash stock rom. And from this time, i have some problems: baseband unknown,battery 999%,wifi error. I try to flash by smart flash,but just flash success file .bin, file .fls always says " error". I have tried on multiple computers,win7,xp sp3 but the same error occurred:
Trying to communicate with IFX modem, and then - timeout error.
I tried with nvflash but that situation still exists.
What can I do to fix it?
Click to expand...
Click to collapse
What is The error? U can press volume - and power to flash, or volume - + and power.
bactuong said:
What is The error? U can press volume - and power to flash, or volume - + and power.
Click to expand...
Click to collapse
programme run this log
00:00..0 sec :download start...
oo:02.0 sec :rombinary download start
00:02.1 sec : psi ram writing start
00:02.1 sec :trying to communicate with ifx modem
00:22.1 sec :timeout error is occoured
00:22.1 sec :error!
I entered it as a smart flash by flash, I have flash file system .bin. Error occurs only on file .fls
when its the RIL not the BB. it cant read the BB if the RIL is not matching.I get something similar ,strange.
R0B3RTF1SH3R said:
when its the RIL not the BB. it cant read the BB if the RIL is not matching.I get something similar ,strange.
Click to expand...
Click to collapse
I I have tried a lot of RIL,but nothing happen,the error continues.I tried RIL:
405
502
606RIL-p990-signed
725RILv10d-p990-signed
0530
622-p990-signed
V20-BB622-gingerbread
can someone help me?
Try flashing the stock rom with smartflash.
Here are roms:http://forum.xda-developers.com/showthread.php?t=942830
This will erase all yuor apps and the content of internal sd!
agree with it, start from scratch with the latest from your carrier or from lg.
I am having the same issues. I tried using smart flash tool and that is what caused the baseband loss in the first place (i was trying to flash original su660 rom) Is there something I did wrong?
Do you fix your phones? I have got the same issue. Please help me
hgfdsa24 said:
Do you fix your phones? I have got the same issue. Please help me
Click to expand...
Click to collapse
I just tried it all again. If you have an su660 you should head over to android development su660 and they should point you in the right direction.
leaven) pociwa
leitz010 said:
I just tried it all again. If you have an su660 you should head over to android development su660 and they should point you in the right direction.
Click to expand...
Click to collapse
I have P990
can somebody help, have the same problem
need a little help here :crying:
I FIND SOMETHING. When you discharge your phone to ~15% everything back to normal and u can flash phone. When u charge it everythink breaks again. Now devs help. I charge phone to 21% and battery get 4180mV, im reboot phone and everything broken again. Battery status is unknow and baseband too. I change baseband to 0725 but it did not help. What we should do? Is the fault of the battery or firmware?
I had the same problem with the baseband and the battery, flashing stock then going back worked form me.
kali113 said:
I had the same problem with the baseband and the battery, flashing stock then going back worked form me.
Click to expand...
Click to collapse
What stock version do you flash? And what metod do you use? *kdz, smarflasher or nvflasher??
hgfdsa24 said:
What stock version do you flash? And what metod do you use? *kdz, smarflasher or nvflasher??
Click to expand...
Click to collapse
I have flashed v20q but I'm not sure if thats gonna work for you 100% you should give it a try, also I used smartflash.
Hi All
after moving from my captivate to p990 yesterday i managed to brick it in less then few hours
have been installing new roms almost everyday on captivate but have been lost with my new lg
so what i managed at this moment is that i am running smartflash and it can see the phone, but i think i need now fls and bin files in order to flash them, but i have no idea which one
can somebody help please?
thanx in advance :good:
managed to solve it with nvflash but now i have even older version of android and no baseband , will try some other roms now
can't solve no baseband issue no matter what rom i install !!! can anybody advise what can i do?
Yea, i might be having the same trouble, and i'm a kind of noob on this area... I tried installing CM10 http://forum.xda-developers.com/showthread.php?t=1964240 when my phone was CM7, and now it looks like this when i boot it: http://i50.tinypic.com/2vw73ev.jpg (those are 2 LG logos). Is there any step-by-step guide for this, i'm kind of a noob.
Edit: oh yea, so i tried some stuff (tbh i have no idea what i'm doing) and now the screen says "S/W Upgrade - Please wait while upgrading". I don't know if it's stuck there, for the moment i'm just waiting to see what happens.
Edit2: So i am able to get into ClockworkMod recovery by pressing Power and Volume down. Then i tried to make a restore, but it said "MD5 Mismatch"
@Jeppe S
i solved phone boot issue with nvflash and 2x-v10b-1300166062-nvflash.zip, but this does not help with unknown baseband problem
even tried all rils with GetRIL but no luck, it advised ril 1035.21_20110725 that i cant find till now, all download links are non valid
so how is it going? any luck? i am still without baseband.
Jeppe S said:
Yea, i might be having the same trouble, and i'm a kind of noob on this area... I tried installing CM10 http://forum.xda-developers.com/showthread.php?t=1964240 when my phone was CM7, and now it looks like this when i boot it: http://i50.tinypic.com/2vw73ev.jpg (those are 2 LG logos). Is there any step-by-step guide for this, i'm kind of a noob.
Edit: oh yea, so i tried some stuff (tbh i have no idea what i'm doing) and now the screen says "S/W Upgrade - Please wait while upgrading". I don't know if it's stuck there, for the moment i'm just waiting to see what happens.
Edit2: So i am able to get into ClockworkMod recovery by pressing Power and Volume down. Then i tried to make a restore, but it said "MD5 Mismatch"
Click to expand...
Click to collapse
i had the same problem when my phone got wet... i needed a few smartflash reinstalls...
ar first i would install the v20s baseband... here
then install v20s click here to download last v20s italy
both operations can be done with smartflash
then u install cwz through nv flash and you are done...
good luck
thanx for your advise, but i cant install those files or any with smartflash as prgress breaks at about 40-60 %, i tried different usb ports but cant achive it, now if i had something that i can use with NVflash that would be fantastic as nvflash works with my phone
petlo99 said:
i had the same problem when my phone got wet... i needed a few smartflash reinstalls...
ar first i would install the v20s baseband... here
then install v20s click here to download last v20s italy
both operations can be done with smartflash
then u install cwz through nv flash and you are done...
good luck
Click to expand...
Click to collapse
now this is getting really weird, i installed few roms via recovery, i went back to stock via nvflash i even used Full Brick Repair http://forum.xda-developers.com/show....php?t=1975274 and am running now 4.1.2 BUT still unknown baseband !!! any suggestion? thank you
gugman said:
now this is getting really weird, i installed few roms via recovery, i went back to stock via nvflash i even used Full Brick Repair http://forum.xda-developers.com/show....php?t=1975274 and am running now 4.1.2 BUT still unknown baseband !!! any suggestion? thank you
Click to expand...
Click to collapse
Help, my baseband is shown as Unknown Baseband?
You have a wrong RIL installed. For LG Stock GB ROMs you need to install a RIL designed for GB and for CM and Froyo ROMs use a RIL designed for Froyo or the SU660.
Please refer to the question "What RIL should I use? Should I install a matching RIL?" for more information.
SOURCE: http://forum.xda-developers.com/showthread.php?t=1658047
that is what i did in a first place,but i am afraid that is not an issue here, exactly in that thread i wrote
i have no reception at all !!! no matter what. there is also one thing, i am facing exactly same problem that was mentioned here http://forum.xda-developers.com/showthread.php?t=1055757
with smartflash i am not able to flash any basbend (fls) but can flash rom without any problem (bin)
so is there any other way to flash baseband then fls? i tried on 2 pc and 1 laptop, used all usb ports, no luck
can it be hardware failure ?
Al3xand3r# said:
Help, my baseband is shown as Unknown Baseband?
You have a wrong RIL installed. For LG Stock GB ROMs you need to install a RIL designed for GB and for CM and Froyo ROMs use a RIL designed for Froyo or the SU660.
Please refer to the question "What RIL should I use? Should I install a matching RIL?" for more information.
SOURCE: http://forum.xda-developers.com/showthread.php?t=1658047
Click to expand...
Click to collapse
always get one of the following 2 errors
00:00.0 Sec : Download Start...
00:02.0 Sec :RomBinary Download start
00:02.0 Sec SI RAM writing start
00:02.6 Sec :Trying to communicate with IFX modem
00:22.6 Sec :Timeout error is occured
00:22.6 Sec :error!
or just this
00:00.0 Sec : Download Start...
00:07.1 Sec :We can't communicate with specific port
tried to run it as an administrator, tried to run it in compatibility mode and as already mentioned on a few different machines and usb ports. maybe i need to try to do it on xp ?
I have the same problem. Please help us
Baseband: UNKNOW
Batery status: UNKNOW
IMEI UNKNOW
I try change ril but it did not help
gugman said:
always get one of the following 2 errors
00:00.0 Sec : Download Start...
00:02.0 Sec :RomBinary Download start
00:02.0 Sec SI RAM writing start
00:02.6 Sec :Trying to communicate with IFX modem
00:22.6 Sec :Timeout error is occured
00:22.6 Sec :error!
or just this
00:00.0 Sec : Download Start...
00:07.1 Sec :We can't communicate with specific port
tried to run it as an administrator, tried to run it in compatibility mode and as already mentioned on a few different machines and usb ports. maybe i need to try to do it on xp ?
Click to expand...
Click to collapse
I tried flash phone using *.kdz, by smartflasher and everytime i have error. Do you know how can i flash baseband using other methods??
There is any rom in *.zip format containing baseband??
Baseband you can flash only with .KDZ or smartflash, others tool have not this possibility
Hi,
I tried everything but i have problem with upgrade to official 30a. Till now, I used 28e harsh & tonyp, and first i try to upgrade with nvflash and i did it with out any problems, but my WiFI didn't work after it. Then i tried with smartflash and it always show me error like this:
00:41.8 Sec :Set FLASH address
02:55.6 Sec :Code Download success
02:55.6 Sec :Num of partitions are 7
03:05.6 Sec :Timeout error is occured
03:05.6 Sec :error!
Sometimes it happened during that slow loading, but most of the time after loading and reading number of partitions. Now, when i go to phone info, it doesn't show me basebend, i don't have network, because my SIM is not recognized. I tried again with nvlash but problems remain the same?
What to do?
luka78 said:
Hi,
I tried everything but i have problem with upgrade to official 30a. Till now, I used 28e harsh & tonyp, and first i try to upgrade with nvflash and i did it with out any problems, but my WiFI didn't work after it. Then i tried with smartflash and it always show me error like this:
00:41.8 Sec :Set FLASH address
02:55.6 Sec :Code Download success
02:55.6 Sec :Num of partitions are 7
03:05.6 Sec :Timeout error is occured
03:05.6 Sec :error!
Sometimes it happened during that slow loading, but most of the time after loading and reading number of partitions. Now, when i go to phone info, it doesn't show me basebend, i don't have network, because my SIM is not recognized. I tried again with nvlash but problems remain the same?
What to do?
Click to expand...
Click to collapse
It happened to me as well, so what I did was to change the USB cable which, for an unkown reason, wouldn't work for USB connection anymore (though the phone seemed to be properly recognized in SmartFlash.
So try with another cable, this may help. Also make sure your computer makes the noise telling you the phone was properly connected in SmartFlash mode before starting the SmartFlash process.
Hope this helps!
I made it successful just with switching fls and bin during flashing. I put fls under bin and bin under fls. And it worked
problem is occured due to ics partitions..
do the following steps.
1. nvflah any gb or froyo rom.
2. when u r on gb or froyo rom then flash the official ics rom via smartflah.
try this if works then please hit thanx.. n repute me.
xerol said:
problem is occured due to ics partitions..
do the following steps.
1. nvflah any gb or froyo rom.
2. when u r on gb or froyo rom then flash the official ics rom via smartflah.
try this if works then please hit thanx.. n repute me.
Click to expand...
Click to collapse
As i said in previous post, i made it to work with switching fls and bin places in smartflash
luka78 said:
00:41.8 Sec :Set FLASH address
02:55.6 Sec :Code Download success
02:55.6 Sec :Num of partitions are 7
03:05.6 Sec :Timeout error is occured
03:05.6 Sec :error!
What to do?
Click to expand...
Click to collapse
Hi,
I don't know if this can help you, but for me work, base on my experience, (I suppose you will already have tried).
I get this error when i connect phone with smartflash opened, , then without disconnect phone, i close smartflash, and reopen smartflash, then i wait for COM, and then i can use smartflash, without timeout error, i've had to do so, both for the BB to ROM, because if i wasn't close smartflash one time (after connect phone), i get timeout error.
I've flashed independent files, first the BB, then i disconnected the phone from the PC, I waited about 10 seconds, and then reconnected in SmartFlash mode, for flash the ROM.
Latetly, i hadn't problems in nvflash mode for the CW.
Edit: seems that some people, at least here in Spain, is having problems if the SmartFlash run without the battery, according to the comments, it seems that they have had to do with the battery installed. And besides, they talk about can cause problems some USB ports
good luck guy.
Thanks!!!!
Hey guys ......if someone could help me with a good solution on fixing the flashing error on lg optimus black-KU5900
At first no imei ,no baseband and there is always a solution to that..... i flashed in the V30I_00 korean version (Olley) stock rom and whoo :laugh: i had a working phone , happy enough and rooted it and after installed CWM using rom manager -Got the LG security error , that was nothing to worry about cause i have the smart flash tool.
Flashed it again but this time ...i flashed the V30I_ cp.fls with the LGP970AT-00-V10a-EEU-XXX-MAY-09-2011+0_AP.bin ....worked perfectly and since it gave me hard time and headache how to flash into recovery without getting a security error....this worked , i flashed CM 10.1 into this KU5900 ....omg phone is perfect :laugh: , then after one day,,base band gone and IMEI.....
---> same thing like before , flashed original rom V30I_00
but i started getting outputs like these
-----------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------
04:31.3 Sec SI RAM writing start
04:31.3 Sec :Trying to communicate with IFX modem
04:36.3 Sec :Confirm IFX communication
04:36.3 Sec SI RAM writing end
04:36.3 Sec :Start PSI RAM
04:36.3 Sec :EBL writing start
04:56.4 Sec :Timeout error is occured
04:56.4 Sec :Start EBL error!
--------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------
i used to get these errors during flashing and didnt worry cause i repeated the same thing like twice and it worked ,
But now its like that , no chances of flashing in the KU5900_CP.fls but can flash the KU5900_AP.bin in phone.
- is there any other way i can flash this cp.fls in phone?
- can some one help me with how to flash a full kdz file in an lg phone offline
- can this be solved (just curios)?
-8THW