Database Develop

[Q] Replacing Default Call screen ?

Hi, I'm on stock 2.1 update 1 , rooted phone, Can I change my callscreen ? (when a call comes) to something cool ?
the only problem I have with default screen is mute button, it automatically gets press when my cheek touches the screen

Try "ultimate call screen" app from store...
Press THANKS if I tried to help...

orangzeb said:
Hi, I'm on stock 2.1 update 1 , rooted phone, Can I change my callscreen ? (when a call comes) to something cool ?
the only problem I have with default screen is mute button, it automatically gets press when my cheek touches the screen
Click to expand...
Click to collapse
How can that happen? When u put ur phone near ur ear screen locks it self automaticly.
Maybe try Cm7 CUSTOM ROM it has option to hide mute button in call.
Hit thanx if i helped.

@harshitgroup already tried that app , not my cup of tea and poorly written !
@pipi14, it happens sometimes, and I don't use custom roms co'z they lack in speed and has bugs here and there !

Okei then, ur saying that stock rom is fast and smooth. Deem, i used stock rom like one hour cuz its slow as hell and looks ugly as well.
And it supports very little number of apps.
Hit thanx if i helped.

I don't think it worth the risk of unlocking boot loader + blah blah blah, I will go for xperia Ray then.. planning to sell X8 co'z it has a slow processor and no flash support as well as no multitouch.
what rom you recommend let's see ? I've tried Ginger DX once and hated it. it was damn slow.

GingerDX v26 is fast and smooth even with stock kernel. But I don't like that cuz with stock and Alfs for GDX kernel my phones wifi works maybe 2 minutes. MiniCm7 and nAa-11 rocks and it don't have bugs.
Sent from my E15i using XDA

Screen problem

I have 3 problems with my screen, I don't think it's HW error :
1-I plug USB cable for transfering files & then the touch screen goes wild for example I wanna press "Z" on my keyboard in messaging it types like this "zzzzzzzzz" repeats the touch point again & again (or I wanna press "turn on USB storage" lot of confirm messages will appear)
2- another issue is about brightness ,for example I check a option in settings (or in apps) when I touch it & phone increases & decreases brightness like a blink .(you can try by your self)
3-last problem happens when overclocking, screen becomes crazy! For example whole screen moves up & status bar appears at bottom of screen
Like this :
|``````````
| ♣♥♣♪♦
| ♦
|
|
| ™
|,,,,,,,,,,,,,,,,,,,,
After overclock:
|``````````
| ♦
|
|
| ™
| ♣♥♣♪♦
|,,,,,,,,,,,,,,,,,,,,
Help! These are really annoying
nAa14 - minicm7,2 2.2.1
This is Jay-z-s

Well, you can try to change your ROM and see what happens. A good combo is Alfs kernel (CM7 v8a) + MiniCM7 (latest version, reinstall it after wipe all).

Yea, I think it's kernel's problem but alfs is toooooooo buggy!
#tried other roms & same results
This is Jay-z-s

I face no. 1 problem when I lost my original charger and tried to charge with my sis phone's charger. I think there is power voltage issue for that problem. The same issue with pc too. U can try any other pc to check.
Sent from my ST26i using xda app-developers app

leecorp said:
I face no. 1 problem when I lost my original charger and tried to charge with my sis phone's charger. I think there is power voltage issue for that problem. The same issue with pc too. U can try any other pc to check.
Sent from my ST26i using xda app-developers app
Click to expand...
Click to collapse
You're right ! My charger cable is broken too I use Nokia USB cable, thanks man so helpful :beer::thumbup:
This is Jay-z-s

Try other kernels to see if that persist man

Bro this is the quick current tampering...this happens if u use a dc voltage instead of ac...
Sent from my X8 using xda app-developers app

HemdonG said:
Bro this is the quick current tampering...this happens if u use a dc voltage instead of ac...
Sent from my X8 using xda app-developers app
Click to expand...
Click to collapse
I didn't get it!
U mean if I overclock when charger is connected this won't happen?
This is Jay-z-s

When you are overclocking set your min frequency above 245mhz.
That might help in the screen upside down issue..
sent from my phone using hands and brain...

dagger said:
When you are overclocking set your min frequency above 245mhz.
That might help in the screen upside down issue..
sent from my phone using hands and brain...
Click to expand...
Click to collapse
I don't know why but when I lock the screen, everything goes fine but after minutes (randomly) it moves again,can CPU under volt cause this?
(screenshot shows no problem but I can take a picture using another camera if you wanna see it)
Also Do you know anything about my 2nd question? That's bright blink isn't that much attractive but I think phone will be faster & more responsible without that flash/bug
Sorry for Eng,
This is Jay-z-s

Yes for that you have to enable hysteresis in cyanogenmod settings-- >display-- >automatic backlight..
Or use the app yaab from the store for automatic backlight..
sent from my phone using hands and brain...

R: Screen problem
Try to change mod ... im using mookeos 1.3 perfect ... fast with dc2sd and without bugs!!
I remembe i was the same screen problems with a cm release.
Inviato dal mio E15a

picard80 said:
Try to change mod ... im using mookeos 1.3 perfect ... fast with dc2sd and without bugs!!
I remembe i was the same screen problems with a cm release.
Inviato dal mio E15a
Click to expand...
Click to collapse
Can you link me to mookeos? Can't find
Edit : found it, looks wonderful thanks
This is Jay-z-s

Wierd Touch / display Issues

Ok
Ive tried to experiment extensively with this issue I am having;
1) When I press the stand by button, If there is no lock screen then I sometimes need to press/touch the screen once randomly, after which the second touch is responsive. So basically if I click on the home icon, the first touch will highlight it, but no action will be performed. Second touch will do the action I programmed home button.
2) If I use the 3rd Party app for the lockscreen, and I have the same issue,when powered on, I have to tap the screen first, then after that the second action (swipe or pattern) works. First touch doesn't respond.
3) Rarely the touch does responds in the first go, after 20 times not working on the first touch maybe. This eliminates suspected faulty hardware.
Ive reinstalled my rom (fuklag1.4) and it made no difference. Ive reset to stock kernel, made no difference, Ive tried a lot of things, a different launcher,no luck. Does anyone notice this ? or have the same issue?
Im using ;
Unlocked Bootloader
Doom Kernel 6
Ful Lag 1.4
Dodexed it myself
Pure X Audio 11
Shrunken Touch Buttons
Any pointers would be helpful.

Do you have some script in init.d?
Did you tried stock rom?
Sent from my C6602 using xda premium

gm007 said:
Do you have some script in init.d?
Did you tried stock rom?
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
how do I get the script?
No. Ive departed from the stock rom, on the stock rom, I dont recall these issues to be honest but I cant remember. I dont even have it saved to revert to.

The script should be in system/etc/init.d folder if there is any.
You can revert to stock rom by using flashtool.
Sent from my C6602 using xda premium

[Q] Questions for 1st android flashing

Hello guys...
well... this is will be my first flash using android tools ((from symbian i'm quite used to it)).... this is my second android ((today I own a Xperia Z1 and before a Motorola Razr i, which i never flashed))...
and I have some questions regarding this flashing procedure.... some one mind just clarify me around some doubts ??
1 - after I flashed my mobile and if I regret, can i reinstall the flash the sony fw in the same way? i mean, download it from sonymobile.com and flash it? is this works?
2- these custom roms to Z1 ((cyanogem, miui, and so on)) are the pure android with sony drivers OR are they the same from sony but modified? I'm asking this because i like ((and use so much)) the sony features like stamina, throw, screen mirroring ((I use this one a lot to play on my tv))... If these ""sony features"" doesn't come ""out of box"" when I flash a custom rom, can i install them later?? I never saw any video showing these stuffs or any at all...
3- these custom roms can I enable and disable animations and other things to enhance my phone?? because with my previous phone ((Motorola Razr i)) i was able to do this and much more, and this save battery a lot... can I do this?? if yes, mind to attach a screenshot to show what can do? I was reading many other forums ((including from sonymobile) and even there they complain about drain battery and random freezes, just like I'm having these days....
4 - Ok... i read a lot but I couldn't understand exactly what is TWRP.... mind to explain as if i 6yo?? =)
5 - Is it normal to screen not shows up when I press the power button to ""wake up"" the screen?? I mean... sometimes i want to check my phone, and when I press the Power button the screen just freezes in black, not showing anything .... and just show something after some seconds ((ten or more)) or after i press the Power button for some seconds as if i want to shut it down.... this happens more ""often"" if i press the Power button to lock and after 2, 3 seconds i have the need to use the phone again ((which this never happen with my Razr i))...
6 - my phone heats a lot.... i mean.... a really lot.... is that normal?? i was reading about this and many other z1 owners complains from this same thing...
thanks in advance =)

1. Yes
2. If you install cyanogen or other AOSP roms, you need to unlock bootloader. also you will loose stamina mode and other sony features. i dont think you can get them back, look around in other sections.
3. It could. Honestly, my z1 hasn't frozen on me ever. I am on stock rooted 761 fw. If you want to disable animations go to developer options and disable the animations there, you can do it both in stock sony and aosp.
4. Twrp is a recovery, you need it to flash roms and do backups of your phone. Team win recovery project.
5. I do not know if its normal as my z1 is very responsive, no delay in screen opening time even when i underclocked the cpu to 1.7Ghz
6. Yes it does tend to heat up after prolonged gaming etc. You can lessen it by underclocking. It works trust me
Sent from my C6903 using Tapatalk

mahalkosijoy said:
1. Yes
2. If you install cyanogen or other AOSP roms, you need to unlock bootloader. also you will loose stamina mode and other sony features. i dont think you can get them back, look around in other sections.
3. It could. Honestly, my z1 hasn't frozen on me ever. I am on stock rooted 761 fw. If you want to disable animations go to developer options and disable the animations there, you can do it both in stock sony and aosp.
4. Twrp is a recovery, you need it to flash roms and do backups of your phone. Team win recovery project.
5. I do not know if its normal as my z1 is very responsive, no delay in screen opening time even when i underclocked the cpu to 1.7Ghz
6. Yes it does tend to heat up after prolonged gaming etc. You can lessen it by underclocking. It works trust me
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
minor questions regarding your answer...
#3 - mine z1 freezes everyday... and i dont have too many apps installed... just a few.... for real... like 20 apps... only 2 games...
#4 - ok... finally i got it =)
#5 - mind to make a test with your own? press the power button normally, as if you gonna lay it down... then, after 2 or 3 seconds, press again the power button, as if you wish to check the hours or a message.... try this at least 5 times if you dont mind..... so... it worked all the times flawlessly?
#6 - nope.... even if im not using it.... not doing anything at all...

soulburnerms said:
minor questions regarding your answer...
#3 - mine z1 freezes everyday... and i dont have too many apps installed... just a few.... for real... like 20 apps... only 2 games...
#5 - mind to make a test with your own? press the power button normally, as if you gonna lay it down... then, after 2 or 3 seconds, press again the power button, as if you wish to check the hours or a message.... try this at least 5 times if you dont mind..... so... it worked all the times flawlessly?
#6 - nope.... even if im not using it.... not doing anything at all...
Click to expand...
Click to collapse
#3 - maybe the RAM is cluttered?
#5 - I did it around 8 times. Turned off the display, waited for 2-5 seconds then turned it on. Works flawlessly. No lag. My device is even underclocked when it is in sleep or display off. When the display is off, i set it to run between 300 - 900something Mhz because I found that the device could still respond without any lag with that setting when turning the display on. When the display is on its 300Mhz to 1.7Ghz.
#6 - maybe have it checked at a sony center.

mahalkosijoy said:
#3 - maybe the RAM is cluttered?
#5 - I did it around 8 times. Turned off the display, waited for 2-5 seconds then turned it on. Works flawlessly. No lag. My device is even underclocked when it is in sleep or display off. When the display is off, i set it to run between 300 - 900something Mhz because I found that the device could still respond without any lag with that setting when turning the display on. When the display is on its 300Mhz to 1.7Ghz.
#6 - maybe have it checked at a sony center.
Click to expand...
Click to collapse
#3 - what can i do to fix it then?? any thought?
#4 - but did you did it using the stock rom? how?
#6 - yeah.... i think i might have one here in my city...
thanks! =)

soulburnerms said:
#3 - what can i do to fix it then?? any thought?
#4 - but did you did it using the stock rom? how?
#6 - yeah.... i think i might have one here in my city...
thanks! =)
Click to expand...
Click to collapse
#3 just keep clearing it manually. if you ate rooted install xposed fw and recent apps cleaner for it to be faster. closes all apps in one click
You can underclock in stock rom, just need root access.
Sent from my C6903 using Tapatalk

mahalkosijoy said:
#3 just keep clearing it manually. if you ate rooted install xposed fw and recent apps cleaner for it to be faster. closes all apps in one click
You can underclock in stock rom, just need root access.
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
ok... i will try it then.... i have "advanced task killer" and "clean master" running together ... i always clean the memory.. the ATK is set to clean every time i press the power button to lock the screen... and, even doing this, my phone keeps freezing all the time... i dont know, but maybe after you rooted the phone, you could enable/disable any options were enhance the phone... no?
well... i will try to install any custom rom to check it and see if i enjoy any of them.... any recommendation for a custom rom? cyanogem? miui? iHacker? DooMLord?

I havent done anything to my phone but root it and underclock + xposed but only modules for camera and cosmetics of the ui. Its your pick. I use stock 761. Just stock + root.
Sent from my C6903 using Tapatalk

mahalkosijoy said:
I havent done anything to my phone but root it and underclock + xposed but only modules for camera and cosmetics of the ui. Its your pick. I use stock 761. Just stock + root.
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
swell... i will give a try =)
thanks very much!!! =)

sweep or double tap to wake

hi, i'm looking for a mod to wake phone by sweep or tap for my fully rooted p7.
as far as i know, this will be only possible with exposed framework, but i don't know if this tweak works with p7.
has anyone tried to implement this feature?

It is possible but we must add a function to the kernel

How?!!!

habbaz said:
How?!!!
Click to expand...
Click to collapse
Guys if you want dbl tap to wake you need to check outHonor 6 Plus as that phone software supports it ...
Probably needs script adding in build prop ?
https://www.youtube.com/watch?feature=player_detailpage&v=xzDBaGs75XM#t=474

Won't be happening any time soon
If we want to get double tap to wake etc. we will have to put it in the kernel somehow...it had something to do with something called elementalX i think(correct me if im wrong please).
So until we find a developer who can add it to our kernel, we won't be getting it...:crying::crying:

this feature drains batt A LOT .. one guy complained about batt. life in Honor 6 plus ...
if there is double tap wake means digitizer is still on all the time .. I don't miss that feature anyway.. just pointing out

Simona Simmy said:
this feature drains batt A LOT .. one guy complained about batt. life in Honor 6 plus ...
if there is double tap wake means digitizer is still on all the time .. I don't miss that feature anyway.. just pointing out
Click to expand...
Click to collapse
I've also read something about the digitizer being on all the time, but that it didn't drain much batt life because it didn't need te be precise so the cpu levels could stay really, really low...
I kind of miss the feature. Well not really miss it, but it would be ****ing awesome haha

JulesMarcus1234 said:
If we want to get double tap to wake etc. we will have to put it in the kernel somehow...it had something to do with something called elementalX i think(correct me if im wrong please).
So until we find a developer who can add it to our kernel, we won't be getting it...:crying::crying:
Click to expand...
Click to collapse
I was watching at Aaron Segaert's dt2wake code from ElementalIX kernel and took a look at our touchscreen driver and I'm afraid it's not possible to implement in our device or it's very hard to. Because touchscreen driver doesn't support gestures. (

JulesMarcus1234 said:
I've also read something about the digitizer being on all the time, but that it didn't drain much batt life because it didn't need te be precise so the cpu levels could stay really, really low...
I kind of miss the feature. Well not really miss it, but it would be ****ing awesome haha
Click to expand...
Click to collapse
Well am coming from iphone cydia app and there is tweak for it and it says that it drains a lot .. and I can confirm that bcos I had it and if you read in this link there is comment that somone recons NOT to install it...
http://www.ijailbreak.com/cydia/smarttap-cydia-tweak-ios/

Thank you for your answers. In this case I have to stick to the smart view cover...
I wondered why there aren't much tweakers for ascend p7, since it's in awesome phone. Compared to other sub forums its really quite here :crying:

Good news: I have successfully implemented DoubleTap2Wake driver authored by Dennis Rassmann in my Ascend P6S-U06. Because P6S and P7 have the same kernel, I'm pretty sure it will work on your device too.
Also I've added duration as tunable parameter after which driver lets device to go to deep sleep. For example, if you read something on internet sites or messaging with somebody and screen goes off periodically, you can easily double tap on it instead of pressing power button. But after a long time device has been in offscreen mode you wake him up by power button. In this manner I think dt2w is useful enough and will not consume much battery power.

Kostyan_nsk said:
Good news: I have successfully implemented DoubleTap2Wake driver authored by Dennis Rassmann in my Ascend P6S-U06. Because P6S and P7 have the same kernel, I'm pretty sure it will work on your device too.
Also I've added duration as tunable parameter after which driver lets device to go to deep sleep. For example, if you read something on internet sites or messaging with somebody and screen goes off periodically, you can easily double tap on it instead of pressing power button. But after a long time device has been in offscreen mode you wake him up by power button. In this manner I think dt2w is useful enough and will not consume much battery power.
Click to expand...
Click to collapse
Oh great... how I can do this?

Kostyan_nsk said:
Good news: I have successfully implemented DoubleTap2Wake driver authored by Dennis Rassmann in my Ascend P6S-U06. Because P6S and P7 have the same kernel, I'm pretty sure it will work on your device too.
Also I've added duration as tunable parameter after which driver lets device to go to deep sleep. For example, if you read something on internet sites or messaging with somebody and screen goes off periodically, you can easily double tap on it instead of pressing power button. But after a long time device has been in offscreen mode you wake him up by power button. In this manner I think dt2w is useful enough and will not consume much battery power.
Click to expand...
Click to collapse
Let us know after week how your battery doing ..
Thnx

Simona Simmy said:
Let us know after week how your battery doing ..
Thnx
Click to expand...
Click to collapse
I stayed dt2w on for this night. Normally, after 8 hours of night battery drains for 4%, i.e. 0.5% per hour. After this night battery drained for 16%, in four times more than usually.
But if I stay dt2w on just for a few minutes after screen off, battery drain is not noticable at all.

Kostyan_nsk said:
I stayed dt2w on for this night. Normally, after 8 hours of night battery drains for 4%, i.e. 0.5% per hour. After this night battery drained for 16%, in four times more than usually.
But if I stay dt2w on just for a few minutes after screen off, battery drain is not noticable at all.
Click to expand...
Click to collapse
Post mod thread for us then

Sorry guys, but I'm too lazy to translate whole post in english, so I just give a link here.
http://4pda.ru/forum/index.php?showtopic=572025&view=findpost&p=40277231

Kostyan_nsk said:
Sorry guys, but I'm too lazy to translate whole post in english, so I just give a link here.
http://4pda.ru/forum/index.php?showtopic=572025&view=findpost&p=40277231
Click to expand...
Click to collapse
Sent from my HUAWEI P7-L05 using XDA Free mobile app
When I try to open the k-tuned kernel.zip file it gives 404 error saying the file has been deleted or moved

andromodgod said:
Sent from my HUAWEI P7-L05 using XDA Free mobile app
When I try to open the k-tuned kernel.zip file it gives 404 error saying the file has been deleted or moved [emoji14]
Click to expand...
Click to collapse
You need to be logged in.
Sent from my iOcean-M6752 using Tapatalk

miljenko said:
You need to be logged in.
Sent from my iOcean-M6752 using Tapatalk
Click to expand...
Click to collapse
Mirror for K-Kernel
im still unable to figure out how to work sweep2sleep i have enabled it in /sys
but it is still not working

andromodgod said:
im still unable to figure out how to work sweep2sleep i have enabled it in /sys
but it is still not working
Click to expand...
Click to collapse
Swype on navbar.