Hi,
I have a: 500gig
An otg connection
And p7310 i want to menthion that i did a flash with the new ics from cellular south from sammobile
When i connect the hdd it says high powered usb device connected. Then it says cannot access device!
I tried alot of apps and none worked
Some one told me to enable usb debbuging and still didnt work
I have been up for about 16 hours and wont sleep till i do this but my brain cant think straigt from lack of sleep lol pls help.
Thnks
Your hdd needs more power than your tab can put on it.
You need ti connect them with a powered usb hub, or you can try one of that «Y» form data cable for your hdd, one side connected to the tablet, and other side connected to some usb power charger...
Sent from my XT910 using xda premium
Is it ntfs formatted? That may need special app or kernel to mount
Related
i'm having a problem with the usb of this device its a sprint galaxy tab i brought it used. under menu / settings / wireless and network i dont see an options for usb and when i plug in the usb cord to the computer theres a red x on the battery, windows doesnt even prompt me to install drivers i'm lost on what to do next
Try to use a different usb cord. . . By the way. . . What rom are you using in your tab? Because it seems that BOCA ROM doesnt have usb setting
i'm using the stock sprint rom and the usb cord is brand new i brought it from the t-mobile store yesterday
also what would the cord have to do with no usb options showing up under wireless and networking
Use a different usb port, and try a different pc.
Under setting>>wireless & network>>usb setting which do you choose? This option is important as your usb cord function depend on the selection of usb option. If you choose kies samsung, make sure you have the software install on your PC. If mass storage, make sure your have SD card inside and its not corrupted.
The battery with the x red cross i think is normal each time you connect it to PC. If you connect it to AC plug, then the x cross will not show.
Sent from my GT-P1000 using XDA App
Ok there is a similar post on this. Plug tablet in and charge it. While tablet is charging unplug your pc and then reboot it up to reset the usb ports. take your tablet and connect usb cable to pc. Ensure you have the samsung usb drivers loaded. Put your tablet in download mode and using odin try reflashing. You can try this if you don't have a second pc.
Sent from my SPH-P100 using XDA Premium App
Sent from my SPH-P100 using XDA Premium App
please tell me how to enable usb on the go . i want to attached my pen drive and my hard drive to my phone .
plug it into the phone, and u're ready to go.. hence the name usb on the go
jinnn_1989 said:
please tell me how to enable usb on the go . i want to attached my pen drive and my hard drive to my phone .
Click to expand...
Click to collapse
You need a USB Host to go cable - they are pretty cheap off of ebay.
USB hard drives don't always work - at minimum you will need a powered hub.
- Frank
i know wht USB on the means but how do i enable it. i have tried connecting with a pendrive with the help of the USb on the cable but it does not show .
Once you plug your on the cable in the phone will inform you that usb connecter s connected. Whatever you plug in at the other end of otg cable work run unless it is not supported.
Sent from my SCH-I500 using Tapatalk
Just plug it in and look in My files. It will show as usbstorage.
I have an official samsung OTG cable, it works fine on the SGS2, but doesn't appear on the Galaxy Note under usbstorage.
Anyone else out there having similar problems?
i had grab some ebay OtG but after unmount and remove the OTG it causes wakelock which drain alot of juice.
I am also facing problems with OTG . when i plug in the cable thr is not msg nor anything happens in phone. please could any one tell me how to enable it may be with kernel or custom rom or may be anything else.
I also want to know this as well,I have spent considerable time yesterday trying to make this work but no luck at all,I would appreciate if someone could help,as I have seen a video in this forum where the guy was able to.connect a mouse to it stating that it is supported out of the box.
I was able to get it to work with a pendrive and a mouse with no problems, but I couldn't get a keyboard or my 2.5" external drive to mount.
Details:
My OTG cable was from DealExtreme for $2.30 or something.
My pendrive was FAT32 formatted.
My mouse was a basic $10 optical one.
My 2.5" external was NTFS, which probably goes some way to explaining why it didn't work even when I gave it some extra power from my desktop PC too.
My keyboard was a standard USB. I also tried a Logitech keyboard with a wireless USB dongle but that didn't work either.
I watched a whole film off my pendrive with no issues. I messed around with the mouse a bit, but the cursor moved too slowly for my taste and the scroll wheel didn't scroll webpages, which is half the reason I'd plug a mouse in anyway.
jinnn_1989 said:
I am also facing problems with OTG . when i plug in the cable thr is not msg nor anything happens in phone. please could any one tell me how to enable it may be with kernel or custom rom or may be anything else.
Click to expand...
Click to collapse
If you get no message when the cable is plugged in on it's own, chances are it is a problem with the cable. I bought a cable of Ebay which didn't work, so I bought a different one and that did.
Regards,
Dave
I downloaded Nook Tweeks, enabled USB host mode and External vBus, but nothing happens when I connect a USB-stick via a micro ubs to usb converter.
Am I supposed to do something else? Or does the USB-stick have to be in some special format?
BrotherZero said:
I downloaded Nook Tweeks, enabled USB host mode and External vBus, but nothing happens when I connect a USB-stick via a micro ubs to usb converter.
Am I supposed to do something else? Or does the USB-stick have to be in some special format?
Click to expand...
Click to collapse
I got the same exact problem. It didn't seem to work at all.I think I'll have to order the adapter to see if the problem is the OTG cable or not
dannghiem0801 said:
I got the same exact problem. It didn't seem to work at all.I think I'll have to order the adapter to see if the problem is the OTG cable or not
Click to expand...
Click to collapse
I ordered some cheap ones from DX, but since there are two of them and none of them works I'm assuming it's the Nook the problem is with.
BrotherZero said:
I downloaded Nook Tweeks, enabled USB host mode and External vBus, but nothing happens when I connect a USB-stick via a micro ubs to usb converter.
Am I supposed to do something else? Or does the USB-stick have to be in some special format?
Click to expand...
Click to collapse
It could be the USB-sticks are trying to draw too much power. The Nook host port will only supply low power USB devices (<100mA) and it is also best to have a fairly well charged battery. Some sticks work and others don't.
If you have a powered USB hub then this supplies the power so there is no problem. So try with a powered hub to at least see if that is the issue.
bobtidey said:
It could be the USB-sticks are trying to draw too much power. The Nook host port will only supply low power USB devices (<100mA) and it is also best to have a fairly well charged battery. Some sticks work and others don't.
If you have a powered USB hub then this supplies the power so there is no problem. So try with a powered hub to at least see if that is the issue.
Click to expand...
Click to collapse
I used the same USB in this chart Nook Color USB HOST Device Compatibility List Sandisk Cruzer 8GB on CM7
I bought the Nook Color is to connect it to my camera via DSLRcontroller but so far still not successfully with USB stick.
Read my thread , it should answer most if not all your questions
[23 Jan 2012][USER/DEV] USB Host Support & Development [CM7/CM9]
I'm hoping to get some free time and update it this weekend with more info and probably a widget
I could never get usb host working on cm7. I have been trying to use RYC usb to control my Nikon Dslr . Once i switch over to CM9 beta it worked first time.
Sent from my Nook Color (CM9 ICS Beta)
Dj-Gutz said:
Read my thread , it should answer most if not all your questions
[23 Jan 2012][USER/DEV] USB Host Support & Development [CM7/CM9]
I'm hoping to get some free time and update it this weekend with more info and probably a widget
Click to expand...
Click to collapse
I have read this thread over and over again. Ill try to run CM9 soon to see if it works
Sent from my NookColor using Tapatalk
CM7 also shouldn't give you any trouble , as long as its FAT32 and you are using a hub
can you explain what exactly have you tried and provide logs?
I didnt use usb hub,just enable the usb host mode in Nook Tweak app and plug my usb via otg cable.
Sent from my MB508 using XDA App
Then you didn't read good enough the thread or the chart..
You need an external hub ( powered or non-powered ) to work with the sandisk cruzer.
Thanks a lot, i ll order one and try it out.
I tried to connect with my camera but nothing happened,I guess I have to try with usb hub as well
Sent from my MB508 using XDA App
This question is all over and i'm a lil lost. I just got my 7.7, stock P6800. I plug it into my mac and there's this cross on the batt on the device. I'm assuming it wont charge with the USB cable that came with it. So i went to buy another. Same problem.
I installed Kies on my mac and it can sync tho. I just can't seem to be able to mount it to my mac and transfer files like a USB drive.
overide88 said:
This question is all over and i'm a lil lost. I just got my 7.7, stock P6800. I plug it into my mac and there's this cross on the batt on the device. I'm assuming it wont charge with the USB cable that came with it. So i went to buy another. Same problem.
I installed Kies on my mac and it can sync tho. I just can't seem to be able to mount it to my mac and transfer files like a USB drive.
Click to expand...
Click to collapse
have you tried turning off usb debugging?
also the tab won't charge with the usb connected to the pc cuz the charge voltage is too low.. you need to modify your build.prop to force usb charging or flash sk806(steve's) custom rom
yes i toggled USB debugging on/off. :S
This might be a bit of a tricky question...
I have this thing:
http://www.amazon.com/EasyAcc-12000...e=UTF8&qid=1371758929&sr=8-1&keywords=easyacc
And I would like to connect my 2.5" hdd to my Nexus 10. But even if I'll be able to connect it, I'm fairly certain it'll drain the battery veeery fast. Could I power either the hdd with a cable like this
http://www.amazon.com/OEM-UTStarcom...?ie=UTF8&qid=1371759016&sr=8-3&keywords=usb+y
or charge the nexus 10 while using the hdd if I connect both the external battery and the hdd to a usb hub like this http://www.amazon.com/AmazonBasics-...e=UTF8&qid=1371759098&sr=8-1&keywords=usb+hub and then obviously connecting the usb hub to the Nexus...
? I don't want to use an externally powered usb hub because I won't have access to a power outlet all the time.
Has anyone ever tried this? Can I ruin my device by playing around with plugging different things at once into it's usb port or is that safe?
Device is rooted if that matters.
I know this is primally not useful but try posting on reedit as well? Sorry but I don't have much knowledge in this area
Sent from my Nexus 10 using xda app-developers app