I mistakenly updated the update-kindle-10.1.3_D026_1326620 (update for Kindle Fire 2), into the Kindle Fire HD. I stuck at the lock screen page when it start up. The touch screen is unresponsive but the power button and volume button is still function. When starting up, it will first show a vertical "kindle fire" logo, after a while it changed to horizontal "kindle fire" logo. Then it turned to the a horizontal lock screen.
Is there anyone can help to solve this problem? I can't factory default or update to the correct firmware at all as the ADB is not turned on in the settings.
PLEASE HELP........
Your ****ed return it
Sent from my KFTT using Tapatalk 2
Related
Was on Facebook and my droid screen went black it still has power but I can't do anything I shut it off and turned it on and it lights up with all different colors like when u lose signal in an old tv and it's salt and pepper I can get into the boot menu but recovery won't work ap fast boot failed to fix and if I let it go I get the dual core logo and it's stuck there is my digitizer screen broke cause I'm confused why will it load the boot menu and the logo but not everything else?
See http://forum.xda-developers.com/showthread.php?t=2648084
Sent from my Amazon Kindle Fire using Tapatalk
My Kindle Fir HD 7" has the 2nd bootloader and TWRP installed with CM11. Had been working fine for a few months but recently, stopped starting up.
Power button will not turn on the device, but when I insert the plug, it powers on. The orange kindle screen loads, followed by the blue kindle screen which then cuts out and the device shuts off.
I have tried letting it charge over night. Also, I cannot get into recovery using vol down + power button since it won't turn on. Also tried to hold volume down as I plug it in - again, it starts up and shuts off as above without entering recovery.
Any thoughts on what's going on? Is there anything I can reinstall? Thanks for the help.
Recently I bricked my device with a bootloop. However, I got out of the bootloop with fastboot. After I got it out of bootloop, I was taken to a screen with a red exclamation mark and I chose the option that said to reset to factory defaults. After that, my kindle turns on and shows the kindle fire logo. After showing the logo, the kindle shows blue and green horizontal lines. Am I hard bricked and out of luck?
My Kindle Fire HD just ran the stock OS and then when I opened Silk browser, the screen went to green and purple static-checker pattern and would not respond. It then shut off, and now won't turn back on. I have no idea why it did this, if you can help me in any way, it would be appreciated.
Do you see the "Kindle Fire" logo when you start the device?
I was given an old Kindle Fire HD 7" 3rd Generation KFSOWI - Soho completely stock and was playing with it a bit and decided to try the KingRoot app (NOT KingORoot). It was going along and got to 35% then said it failed and asked if I wanted to try again. I clicked try again. Thats when everything went downhill. It rebooted on its own then displayed the all white Kindle Fire logo then moved to the brighter white and orange logo with the glimmer moving across the screen. There it stays now. It wont go any further.
I have tried to use Vol - and PWR with it turned off to try to get to Recovery or Vol + and PWR for Fastboot but after the all white logo it just shuts off. Its as if the recovery utility is no longer there.
I do have a Fastboot/Factory cable I made a while ago and when I plug that in it does get to Fastboot mode. However in ADB on my desktop it wont see it there. If I plug in a standard USB cable to the Kindle and let it go to the white n orange logo then ADB will see it and brings up the Serial number but instead of saying "device" it says "unauthorized".
I am seriously at a loss right now as I have been googling to to fix this since it happened and all the ready made utilities are for other generation devices.
I have tried the usual holding the power button for 60 seconds to turn it off and then try turning it back on but nothing works.
Im just not sure what can be done with I cant get to recovery and ADB either wont see it or says its unauthorized.
PLEASE HELP!
John877 said:
I was given an old Kindle Fire HD 7" 3rd Generation KFSOWI - Soho completely stock and was playing with it a bit and decided to try the KingRoot app (NOT KingORoot). It was going along and got to 35% then said it failed and asked if I wanted to try again. I clicked try again. Thats when everything went downhill. It rebooted on its own then displayed the all white Kindle Fire logo then moved to the brighter white and orange logo with the glimmer moving across the screen. There it stays now. It wont go any further.
I have tried to use Vol - and PWR with it turned off to try to get to Recovery or Vol + and PWR for Fastboot but after the all white logo it just shuts off. Its as if the recovery utility is no longer there.
I do have a Fastboot/Factory cable I made a while ago and when I plug that in it does get to Fastboot mode. However in ADB on my desktop it wont see it there. If I plug in a standard USB cable to the Kindle and let it go to the white n orange logo then ADB will see it and brings up the Serial number but instead of saying "device" it says "unauthorized".
I am seriously at a loss right now as I have been googling to to fix this since it happened and all the ready made utilities are for other generation devices.
I have tried the usual holding the power button for 60 seconds to turn it off and then try turning it back on but nothing works.
Im just not sure what can be done with I cant get to recovery and ADB either wont see it or says its unauthorized.
PLEASE HELP!
Click to expand...
Click to collapse
Classic FireOS boot hang. Tough to fix on older (pre 5th gen) devices that do not offer a way to reload FireOS from stock recovery.
Unfortunately, this is not the correct forum for your device (this thread is for 5th & 7th gen Fire 7). You'll want to repost your question here: https://forum.xda-developers.com/kindle-fire-hd