hello everyone, im newbie i just root my lg ob, still locked bootloader, so is there any cusrom for locked bootloader ob? im running on v20e. thanks everyone!
Read stickies stop asking ridiclus questions.
Rifki Nurfaiz said:
hello everyone, im newbie i just root my lg ob, still locked bootloader, so is there any cusrom for locked bootloader ob? im running on v20e. thanks everyone!
Click to expand...
Click to collapse
P970 doesn't have a locked bootloader. All custom ROM can be flashed doesn't matter what official software you phone came with. You have to have your phone rooted with a custom recovery installed though. For instructions check NOOBY's HOW TO it's a sticky.
xonar_ said:
P970 doesn't have a locked bootloader. All custom ROM can be flashed doesn't matter what official software you phone came with. You have to have your phone rooted with a custom recovery installed though. For instructions check NOOBY's HOW TO it's a sticky.
Click to expand...
Click to collapse
thanks a lot for help . and sorry for spaming. i just root my phone and install cwm. i've tried to flash a cusrom (cyanogen 7.2). always bootloop, i've tried 3 times. my friends said that my phone still locked bootloader. so he wrongs?.
dflt said:
Read stickies stop asking ridiclus questions.
Click to expand...
Click to collapse
ups, sorry
Rifki Nurfaiz said:
thanks a lot for help . and sorry for spaming. i just root my phone and install cwm. i've tried to flash a cusrom (cyanogen 7.2). always bootloop, i've tried 3 times. my friends said that my phone still locked bootloader. so he wrongs?.
Click to expand...
Click to collapse
did you wipe data/factory reset before flash the rom?
Rifki Nurfaiz said:
thanks a lot for help . and sorry for spaming. i just root my phone and install cwm. i've tried to flash a cusrom (cyanogen 7.2). always bootloop, i've tried 3 times. my friends said that my phone still locked bootloader. so he wrongs?.
Click to expand...
Click to collapse
Yes. P970 doesn't have locked bootloader. You need to remember Wipe data,cache and dalvik after you flash a ROM. To get into recovery again use adb
Why cm7.2 might I ask. Were almost at a stable CM10?
Sent from my LG-P970
xonar_ said:
Yes. P970 doesn't have locked bootloader. You need to remember Wipe data,cache and dalvik after you flash a ROM. To get into recovery again use adb
Why cm7.2 might I ask. Were almost at a stable CM10?
Sent from my LG-P970
Click to expand...
Click to collapse
what if i dont use adb to get into recovery? i go to recovery through cwm. also install ROM through cwm. OMG! i dont wipe data,cache and dalvik actually wipe data,cache and dalvik after or before flashing ROM?
about cm7.2, i just trying a ROM next maybe zeus or cm10
t0g3 said:
did you wipe data/factory reset before flash the rom?
Click to expand...
Click to collapse
yes, maybe that! im not sure LOL . im running on v20E. is it possible if i flash ROM based on v20O or another? thanks a lot
Rifki Nurfaiz said:
yes, maybe that! im not sure LOL . im running on v20E. is it possible if i flash ROM based on v20O or another? thanks a lot
Click to expand...
Click to collapse
Doesn't matter what the base is. It's just what the developer used as a starting point.
Sent from my LG-P970
---------- Post added at 10:00 AM ---------- Previous post was at 09:56 AM ----------
Rifki Nurfaiz said:
what if i dont use adb to get into recovery? i go to recovery through cwm. also install ROM through cwm. OMG! i dont wipe data,cache and dalvik actually wipe data,cache and dalvik after or before flashing ROM?
about cm7.2, i just trying a ROM next maybe zeus or cm10
Click to expand...
Click to collapse
Before you flash. Most ROMs will be fine wiping after install, but some ROMs add stuff to data and wiping will clear it. Doesn't matter how you go into recovery as long as you get there.
CWM is the recovery you can't goto recovery from there your already there.
Sent from my LG-P970
xonar_ said:
Doesn't matter what the base is. It's just what the developer used as a starting point.
Sent from my LG-P970
---------- Post added at 10:00 AM ---------- Previous post was at 09:56 AM ----------
Before you flash. Most ROMs will be fine wiping after install, but some ROMs add stuff to data and wiping will clear it. Doesn't matter how you go into recovery as long as you get there.
CWM is the recovery you can't goto recovery from there your already there.
Sent from my LG-P970
Click to expand...
Click to collapse
Waw that's very helpful answer, thanks so much, , yaa i know CWM is the recovery, that because my bad engllish, sorry, and thanks a lot! :angel:
Related
I was on LJ6 and I rooted . When I install the CM9, i am stupid using the CWM to flash .. now no matter which rom i flashed , it still keep looping
I can still enter to CWM and download mode .
Need ur help ... Thanks
minicris said:
I was on LJ6 and I rooted . When I install the CM9, i am stupid using the CWM to flash .. now no matter which rom i flashed , it still keep looping
I can still enter to CWM and download mode .
Need ur help ... Thanks
Click to expand...
Click to collapse
Pc odin
Sent from my GT-N7000 using Tapatalk 2
so you arent bricked then
if you can bet into cwr to install a gb kernel then rstoire if not you wil lneed to use pc odin to flash a rom
Did you wipe cache, dalvik, and factory reset?
Upgrading from GB to ICS will usually loop if you don't reset the phone.
Do not wipe cache, dalvik, or factory reset
In fact, stay away from CWM and use PC-Odin to flash a stock image.
Azeazezar said:
Do not wipe cache, dalvik, or factory reset
In fact, stay away from CWM and use PC-Odin to flash a stock image.
Click to expand...
Click to collapse
I TRY FLASHED THE STOCK ROM KJ6,LA2
it still looping .....
Try this, worked for me
http://forum.xda-developers.com/showpost.php?p=25925185&postcount=46
Richy99 said:
so you arent bricked then
if you can bet into cwr to install a gb kernel then rstoire if not you wil lneed to use pc odin to flash a rom
Click to expand...
Click to collapse
how to install a GB kernel? do i need to find a pre-rooted GB kernel ?
ioluas said:
Try this, worked for me
http://forum.xda-developers.com/showpost.php?p=25925185&postcount=46
Click to expand...
Click to collapse
where did u get the files ?
RickR78 said:
Did you wipe cache, dalvik, and factory reset?
Upgrading from GB to ICS will usually loop if you don't reset the phone.
Click to expand...
Click to collapse
IT WORK AGAIN AFTER
I WIPE THE CACHE,dalvik
IT WORK AGAIN
THANKS SO MUCH
minicris said:
IT WORK AGAIN AFTER
I WIPE THE CACHE,dalvik
IT WORK AGAIN
THANKS SO MUCH
Click to expand...
Click to collapse
oh yeah we understand your emotions
but you did not brick at all in the first place!
title to be changed. \reported
Thread closed
Solution was found, no need for more.
my galaxy note was having its update installed last night....then rebooting was to be done...when i pressed ok..rebooting began but it is stuck in samsung logo....
the update was from software update option in phone itself.
Was your device rooted?
Swyped From My Flavoured JellyCore.
rep:
sahilarora2003 said:
was your device rooted?
Swyped from my flavoured jellycore.
Click to expand...
Click to collapse
no it was not!!! I was using update option from phone itself!!
aatmaz said:
no it was not!!! I was using update option from phone itself!!
Click to expand...
Click to collapse
On what firmware was your note before update (e.g. 2.3.5, 2.3.6, 4.0.3, etc) and how long did you wait? Try rebooting first either with battery pull or without.
Just flash any GB ROM (Find it on first link on my signature, post #2)
and wipe cache and data from recovery.
Dont wipe on existing ROM, may be you are on ICS after update.
rep:
kopitalk said:
On what firmware was your note before update (e.g. 2.3.5, 2.3.6, 4.0.3, etc) and how long did you wait? Try rebooting first either with battery pull or without.
Click to expand...
Click to collapse
i was using ICS so must me 4.0.3 not sure!!
You have two option, one as i said in previous post
OR
Flash safe kernel (like hydracore/speedmod) using PC odin
then wipe cache and data from recovery, but you have to reset counter later.
rep : thanx
dr.ketan said:
You have two option, one as i said in previous post
OR
Flash safe kernel (like hydracore/speedmod) using PC odin
then wipe cache and data from recovery, but you have to reset counter later.
Click to expand...
Click to collapse
THANX Dr. but i am not a experienced developer.... had flashed my galaxy ace couple of times...
it would be great if u explain me in simpler way .... :fingers-crossed:
If you are not experienced then i recommend
visit this post
http://forum.xda-developers.com/showpost.php?p=20963718&postcount=2
download and flash any GB ROM using PC odin. Steps are already mentioned there.
after flashing (you will find force closes, dont worry for that)just enter to recovery by vol up + home +power)
and wipe cache and data
your device will boot normally
Then
visit this post
http://forum.xda-developers.com/showpost.php?p=20963707&postcount=1
download and flash any ICS ROM you like and flash same way
BUT DONT WIPE after flashing ICS(if you have followed as said above, you won't need to wipe after flashing ICS), if you want to wipe flash safe kernel first.
rep: thanx
dr.ketan said:
If you are not experienced then i recommend
visit this post
http://forum.xda-developers.com/showpost.php?p=20963718&postcount=2
download and flash any GB ROM using PC odin. Steps are already mentioned there.
after flashing (you will find force closes, dont worry for that)just enter to recovery by vol up + home +power)
and wipe cache and data
your device will boot normally
Then
visit this post
http://forum.xda-developers.com/showpost.php?p=20963707&postcount=1
download and flash any ICS ROM you like and flash same way
BUT DONT WIPE after flashing ICS(if you have followed as said above, you won't need to wipe after flashing ICS), if you want to wipe flash safe kernel first.
Click to expand...
Click to collapse
thanx dr.. it went all well and now i am gonna flash ics rom... hope it will go well too..
one more thing... are u a medical doctor?? i am a medical student too.. final years in MBBS.
if u can please provide me some great medical apps...
once again thanx!!
aatmaz said:
one more thing... are u a medical doctor?? i am a medical student too.. final years in MBBS.
if u can please provide me some great medical apps...
once again thanx!!
Click to expand...
Click to collapse
yes,
I am ENT surgeon.
dr.ketan said:
yes,
I am ENT surgeon.
Click to expand...
Click to collapse
So your a phone doctor as well huh?!
Sent from my GT-N7000 using xda app-developers app
fr3ker said:
So your a phone doctor as well huh?!
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Indeed he is
dr.ketan said:
yes,
I am ENT surgeon.
Click to expand...
Click to collapse
which custom rom do u recommend for galaxy note??
I have never used custom rom
rep:
dr.ketan said:
I have never used custom rom
Click to expand...
Click to collapse
ok!! but i flashed a stock rom. but then phone apps and other apps seems not to be working. error messages like
" calendar storage has stopped working" "android.phone app has unfortunately stopped to work" are comming and i cant have display while calling and cant recive calls as no display is shown. HELP!!
This is common when flashing GB ROM on ICS
though let me know what exactly you did. If you are on GB ROM then reboot in recovery and wipe cache and data will solve it, but if you are on ICS dont do it on stock kernel.
rep:
dr.ketan said:
This is common when flashing GB ROM on ICS
though let me know what exactly you did. If you are on GB ROM then reboot in recovery and wipe cache and data will solve it, but if you are on ICS dont do it on stock kernel.
Click to expand...
Click to collapse
thanks for ur support.. i changed its CSC code after i flashed ICS stock rom and my NOTE was brand new i had just to install my apps again but there was a backup..
THANX DOC!!
as per title...
i flash a paranoid rom (JB) then i can't find the option to make a video call
so i prefer to go back to stock ICS rom.. then i downloaded from here the after flash and phone won't boot up (waiting until 15miniutes) still stucked at samsung logo (but it moving/flashing)
so i just need a nandroid backup (a stock ICS backup with/from recovery) to restore into my phone
please some one make it, upload it, and make a new thread for it
sorry if the backup already post.. I tried to search but i failled to find it
==================================================
or maybe someone can tell me which rom can make a video call?
nelikp said:
as per title...
i flash a paranoid rom (JB) then i can't find the option to make a video call
so i prefer to go back to stock ICS rom.. then i downloaded from here the after flash and phone won't boot up (waiting until 15miniutes) still stucked at samsung logo (but it moving/flashing)
so i just need a nandroid backup (a stock ICS backup with/from recovery) to restore into my phone
please some one make it, upload it, and make a new thread for it
sorry if the backup already post.. I tried to search but i failled to find it
==================================================
or maybe someone can tell me which rom can make a video call?
Click to expand...
Click to collapse
Just flash a stock rom thru odin
Sent from my GT-I9103 using xda premium
1: flash a Philz kernel for ur rom and reboot into CWM and do a facotry reset.
OR
2: flash a GB rom from the same thread and reboot into recovery and do a factory reset
ppl will have their backup data in a nandroid backup.. so its very unlikely that someone will post it.. more over a stockrom backup is about 1 GB
Bhavik Jain said:
Just flash a stock rom thru odin
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
mate i did it... but phone not boot up (waiting until 15 miniutes
any idea?
nokiamodeln91 said:
1: flash a Philz kernel for ur rom and reboot into CWM and do a facotry reset.
OR
2: flash a GB rom from the same thread and reboot into recovery and do a factory reset
ppl will have their backup data in a nandroid backup.. so its very unlikely that someone will post it.. more over a stockrom backup is about 1 GB
Click to expand...
Click to collapse
can u give me a link to that kernel?
flash it into stock rom and make a fullwipe is it?
nelikp said:
mate i did it... but phone not boot up (waiting until 15 miniutes
any idea?
Click to expand...
Click to collapse
Did you do the 3 wipes in recovery ?
If ODIN passed then all is good, it should be booting.
try the above method of going back to GB and then 3x wipes and watch it come alive
Then start the whole procedure again to get back to where you want to be :good:
nelikp said:
can u give me a link to that kernel?
flash it into stock rom and make a fullwipe is it?
Click to expand...
Click to collapse
what is the current rom u flashed?
u need to look for that kernel in this thread
forum.xda-developers.com/showthread.php?t=1901191
azzledazzle said:
Did you do the 3 wipes in recovery ?
If ODIN passed then all is good, it should be booting.
try the above method of going back to GB and then 3x wipes and watch it come alive
Then start the whole procedure again to get back to where you want to be :good:
Click to expand...
Click to collapse
i wiped (on PA wth including kernel not in stock ICS kernel))
I'll try this back to GB via odin pakage and 3time wipe mean fullwipe+fullwipe+fullwipe is it?
nokiamodeln91 said:
what is the current rom u flashed?
u need to look for that kernel in this thread
forum.xda-developers.com/showthread.php?t=1901191
Click to expand...
Click to collapse
i stucked on Stock ICS (malaysia rom)
Pretty clear you didn't wipe cache data dalvik.
Sent from my GT-N7000 using Tapatalk 2
flash any philz kernel cuz most of them works with any stock rom.
asf58967 said:
Pretty clear you didn't wipe cache data dalvik.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
so u i need to flash the Philz kernel and make a:-
1- fullwipe
2- cache and
3- dalvik cahe after flashing stock ICS via odin?
and one more which one i shoul download and flash the PhilZ kernel comfiused it's too many
again...i on stock ICS (malaysia)
nelikp said:
so u i need to flash the Philz kernel and make a:-
1- fullwipe
2- cache and
3- dalvik cahe after flashing stock ICS via odin?
and one more which one i shoul download and flash the PhilZ kernel comfiused it's too many
again...i on stock ICS (malaysia)
Click to expand...
Click to collapse
Yes
---------- Post added at 09:00 PM ---------- Previous post was at 08:59 PM ----------
i guess u need DXLR5 or any
nokiamodeln91 said:
Yes
---------- Post added at 09:00 PM ---------- Previous post was at 08:59 PM ----------
i guess u need DXLR5 or any
Click to expand...
Click to collapse
I'm just shock because there is no this step on Dr. Ketan Guide
ok...
wait.. i try thi menthod
It solved...
what i do is..
1- flash stock ICS via odin
2- flash one of PhilZ kernel
3- make a:-
i- fullwipe
ii- wipe cache
ii- wipe dalvik cache
4- reboot
it just takes 3miniutes to boot up
(very happy)
Thanx to all reponderz
luv u all
we are very happy too..
asf58967 said:
Pretty clear you didn't wipe cache data dalvik.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
the guide never tell/told me...
hehhehee
Glad it worked out for you
Sent from my GT-N7000 using Tapatalk 2
---------- Post added at 11:46 PM ---------- Previous post was at 11:46 PM ----------
Make a nandroid backup now
Sent from my GT-N7000 using Tapatalk 2
Hi. Totaly new here. I just rooted my phone and installed cm9 so that i could install paranoid. I also installed hydracore kernel after paranoid rom. I could do all this because it was all explained. Now I found new rom TMT 4 to instal, but I am afraid to install it because I don't know and don't understand when you can change roms.
Please help me understand how to change (what i have to do before changing roms)
Thanks
kjerkoli said:
Hi. Totaly new here. I just rooted my phone and installed cm9 so that i could install paranoid. I also installed hydracore kernel after paranoid rom. I could do all this because it was all explained. Now I found new rom TMT 4 to instal, but I am afraid to install it because I don't know and don't understand when you can change roms.
Please help me understand how to change (what i have to do before changing roms)
Thanks
Click to expand...
Click to collapse
Same as you installed cm9 and and PA.. Save the rom to your sd card, go to cwm wipe data/cache/Dalvik cache and the flash the rom
Tapatalking on my n7000
msedek said:
Same as you installed cm9 and and PA.. Save the rom to your sd card, go to cwm wipe data/cache/Dalvik cache and the flash the rom
Tapatalking on my n7000
Click to expand...
Click to collapse
So always when changing roms (any rom) just wipe/cache/dalvik cache and install the rom? should I leave hydracore kernel?
Thanks
no need to change. be on that kernel. its safe.
Sent from my GT-N7000 using xda premium
I still don't understand because something just happened to my phone. I had rocket jb rom v2 and I wanted to go back to paranoid android. for that I first had to install cm9 (right???) So I wiped data, cache, dalvik and then try to install cmp zip. after 10 sec reported that the instalation stoped and the Android robot had a red triangle inside.
Then I went back and did everything the same, but instaled back rocket jb rom v2 and it worket. Where did I go wrong???
Want to go back to paranoid utacka
what was cmp.zip?
I guess it was cm9, try this
format/system
format/cache
format/data
format/preload
install zip-point to the new rom
Sent from my GT-N7000 using xda premium
---------- Post added at 04:49 PM ---------- Previous post was at 04:48 PM ----------
flash the pa directly
Sent from my GT-N7000 using xda premium
nokiamodeln91 said:
what was cmp.zip?
I guess it was cm9, try this
format/system
format/cache
format/data
format/preload
install zip-point to the new rom
Sent from my GT-N7000 using xda premium
---------- Post added at 04:49 PM ---------- Previous post was at 04:48 PM ----------
flash the pa directly
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
sorry, but can't understand any of it. I am tottaly new here. sorry for inconvinience ( are all this things in recovery mode - vol up, home, power?)
I didn't see any format data, cache. (can you tell me from point to point please) 1. click this, 2. click that The file is cm-9-2012090...TLY-n7000.zip
Thanks
Once boot into recovery
go to mounts and storage
the the format commands I described earlier.
Go back
install zip from sd
point to the cm9 rom
nokiamodeln91 said:
Once boot into recovery
go to mounts and storage
the the format commands I described earlier.
Go back
install zip from sd
point to the cm9 rom
Click to expand...
Click to collapse
didn't work. i've done everything like you said.
it said: instalation aborted ( red triangle in Android robot)
What can I do to get Paranoid Utacka?
Please help. I am getting really paranoid about bricking my phone.
I guess the rom you have downloaded is corrupt then. First re download the rom and then match the md5
nokiamodeln91 said:
I guess the rom you have downloaded is corrupt then. First re download the rom and then match the md5
Click to expand...
Click to collapse
so I have to download another cm9 rom and install it like you said?
format everything like above?
What is md5?
Sorry for causing you trouble with my unknowledgement
Also you try to flash a stock ROM with odin and reinstall paranoid as you did the first time. There is no need to install CM9 before Paranoid android.
Here you can find all stock rom and the procedure to install and root installing a safe kernel.
andreaonelove said:
Also you try to flash a stock ROM with odin and reinstall paranoid as you did the first time. There is no need to install CM9 before Paranoid android.
Here you can find all stock rom and the procedure to install and root installing a safe kernel.
Click to expand...
Click to collapse
on Paranoid utacka rom it says:
Make sure to run CM9/10 or an AOSP-based ROM : FLASHING FROM STOCK ICS OR ROMS BASED ON STOCK ICS WILL RESULT IN A BRICK! - You're warned!
please help, I am stuck with rocket jb rom
as I said before, there is no need to be on cm9, just download the pa rom and flash it using the procedure above.
md5 is a checksum created when the dev creates the rom. when you download the rom, use a md5 check to verify that the rom you downloaded matches the md5 provided by the dev to make sure you have a genuine download.
I think my phone is damaged, because again it showed red triangle in the robot when I tried to install ne rom (paranoid utacka).
I formated all that you said and tried to install new rom and nothing
What is wrong??????????
and md5 check is the same as Utacka posted
can you paste a pic of that red DROID you talking about
I DONT WANT TO MESS MY PHONE
dont you rhink it will damage it after many problems?
I don't know. You have been talking about that red DROID so was curious to see.
Hi everyone.
My galaxy Ace gts5830 can't cmw can't mounts data; i recently flash it via odin..
when i flash it; it's say it can't apply csc on recovery mod...
now i can't install any custom rom or backups cmw.. i flash it several time id didn't work...
my phone Europe so use fw "xeu" "xwkpa"
s.tanbin said:
Hi everyone.
My galaxy Ace gts5830 can't cmw can't mounts data; i recently flash it via odin..
when i flash it; it's say it can't apply csc on recovery mod...
now i can't install any custom rom or backups cmw.. i flash it several time id didn't work...
my phone Europe so use fw "xeu" "xwkpa"
Click to expand...
Click to collapse
Which CWM version did you install?
mahithm said:
Which CWM version did you install?
Click to expand...
Click to collapse
5.0.26 for cooper
s.tanbin said:
5.0.26 for cooper
Click to expand...
Click to collapse
Can you tell me exactly what happens when you flash a custom rom from CWM?
s.tanbin said:
Hi everyone.
My galaxy Ace gts5830 can't cmw can't mounts data; i recently flash it via odin..
when i flash it; it's say it can't apply csc on recovery mod...
now i can't install any custom rom or backups cmw.. i flash it several time id didn't work...
my phone Europe so use fw "xeu" "xwkpa"
Click to expand...
Click to collapse
You need root permissions to mount /data partition...
1. Reboot into <Stock recovery 3e>
2. Root your device
3. Flash CWM 5.0.2.6 Fixed
4. Done!
mahithm said:
Can you tell me exactly what happens when you flash a custom rom from CWM?
Click to expand...
Click to collapse
i try to remove same use less app and tw home.. which i did lot of time before..
but suddenly it started bootloop.
then i try to cmw back the rom cmw say miss match.
then i flast stock rom via odin
at fast it didn't take properly phone auto started before the operation finish; and started to bootloop.. i flash it again then same problem ..
then i clear data then phone on but cmw can't mound data i try flash cm10 it blink.
finally after several flash and try cm9 it took cm9 and work perfect but if i go stock rom it still having data mound problem
frameworks xwkpa
Viper The Ripper said:
You need root permissions to mount /data partition...
1. Reboot into <Stock recovery 3e>
2. Root your device
3. Flash CWM 5.0.2.6 Fixed
4. Done!
Click to expand...
Click to collapse
phone is 100% rooted
and i installs that cmw as well but cmw won't mount data.
but this problem fix after flash in cm 9
s.tanbin said:
i try to remove same use less app and tw home.. which i did lot of time before..
but suddenly it started bootloop.
then i try to cmw back the rom cmw say miss match.
then i flast stock rom via odin
at fast it didn't take properly phone auto started before the operation finish; and started to bootloop.. i flash it again then same problem ..
then i clear data then phone on but cmw can't mound data i try flash cm10 it blink.
finally after several flash and try cm9 it took cm9 and work perfect but if i go stock rom it still having data mound problem
frameworks xwkpa
Click to expand...
Click to collapse
Always after flashing a STOCK rom via Odin boot into recovery and do wipw data factory reset and wipe cache partition too in order to avoid the bootloop
Don't remove the launcher you need at least one to use your phone
Your data mount problem could be solved if you flash an Android 2.3.6 Firmware
(Try with ddq8 or ktm)
Viper The Ripper said:
Always after flashing a STOCK rom via Odin boot into recovery and do wipw data factory reset and wipe cache partition too in order to avoid the bootloop
Don't remove the launcher you need at least one to use your phone
Your data mount problem could be solved if you flash an Android 2.3.6 Firmware
(Try with ddq8 or ktm)
Click to expand...
Click to collapse
thanks for the tip..
r u sure is it ok if i flash 2.3.6 firmware coz Samsung didn't officialy give any update for my original firmware...
don't mind just scare... so asking..
s.tanbin said:
thanks for the tip..
r u sure is it ok if i flash 2.3.6 firmware coz Samsung didn't officialy give any update for my original firmware...
don't mind just scare... so asking..
Click to expand...
Click to collapse
It will be ok
mahithm said:
It will be ok
Click to expand...
Click to collapse
ok i will give a try...
s.tanbin said:
thanks for the tip..
r u sure is it ok if i flash 2.3.6 firmware coz Samsung didn't officialy give any update for my original firmware...
don't mind just scare... so asking..
Click to expand...
Click to collapse
Yeah, it should work. If you have the correct model (GT-S5830) you could use all the Firwares available for it
---------- Post added at 01:22 PM ---------- Previous post was at 01:16 PM ----------
s.tanbin said:
ok i will give a try...
Click to expand...
Click to collapse
Ok! anyway you can go back to your current firmware when you want
BTW some customs roms are based in european or indian firmwares