Database Develop

Flashed Tayutama Edition v1.0.0 for captive.. results

Froyo based rom, has the standard issues. Home and back reversed, volume keys reversed, radio does not work. Will not connect to data. (I am going to flash radio tomorrow, will post results) wifi works, bluetooth works, gps appears to work, speaker works, have not tried headphones yet.
URL: http://forum.xda-developers.com/showthread.php?t=808763
Have not tried the i9000 version yet. Will tomorrow as well. Flashing back to vibrant stock now, recovery flash didn't work. Had an SD card error when entering recovery mode.
EDIT: When I said radio does not work, I meant data. it's late. It did work, It would show a signal just no data, could not make a call. When doing a network scan, only found AT&T
I have flashed back to bionix, I need a working phone tomorrow. I am going to re-flash this tomorrow for further testing. I do not recommend anyone flash this. If I can get a working radio, i'll update here.

shouldnt all the captivate roms flashed on the vibrant have the same standard issues?

stefan.buddle said:
shouldnt all the captivate roms flashed on the vibrant have the same standard issues?
Click to expand...
Click to collapse
Yes.....
but I've said enough.
If people want to flash ROMs that are useless that's up to them...

seems like another pointless thread, that should be put in General, not really useful to anyone

Why dont u ask the devs 4 idea on how to work this out!! Then this would be a valid thread for development! With that said keep up your work eberyone has a right to post just in the right place.
Peace Out!
Sent from my SGH-T959 using XDA App

I would like to point out that the Captivate rom from tautama isn't a captivate rom at all, but an I9000 rom with an I9000 kernel that the source code that was online a few days ago was used to fix the issues of running an I9000 kernel on a captivate.

lol people keep doing this giving moons an idea that they should too, lol thing is most people here can't even flash a vibrant rom. Hahaha

[Q] CM9 Droid 3 data

Upgraded my version of CM9 for my droid 3 to the newest nightly by Hashcode, there are errors and hashcode has since said so. after finding out there were errors when i rebooted i reinstalled previous version but have lost all data connection. I have found a simple fix by switching to CDMA only and get 1x, but if switch it to any other type of connection and lose all.
Any ideas?

info from teittert
Hashcode ‏@Hashcode0f
Droid 3 Users: Apparently last nights build is borked. I'll check it out in a bit.
so maybe best option is little wait for next relase

niko99 said:
info from teittert
Hashcode ‏@Hashcode0f
Droid 3 Users: Apparently last nights build is borked. I'll check it out in a bit.
so maybe best option is little wait for next relase
Click to expand...
Click to collapse
He knows, he said he flashed back to a previous version and the problem persists
OP, sorry I don't know. Try wiping everything and trying again
Sent from my XT860 using xda premium

Endoroid - you have right my fault
ps.yes - wip's before and after instalation should help

Thank for help, guess it just had to settle for longer than normal 15 minutes. Re-enabled 3G 5 hours later and boom! It is working correctly.

runnin 4.0.4 right now just a lil corky but so far doin good
runnin 4.0.4 right now just a lil corky but so far doin good Ilike it though 4.0.3 was ok but 0.4 is way more stable I wiped 3 times factory/and cache before flash and I flashed with safestrap I am happy please let's get this perfected Ifriggin love it any way only thing is add different touch animations to the ui. Lookin forward to this keep up the good work team cm and of course steve who started cm thnx so far no problems with network

[Q] custom rom battery help

hey guys just got done rooting my droid 3.. used the latest safestrap thx hashcode... flashed darkness falls rom and everything seems fine..other then the bluetooth and lack of vid camera everything works great... one hang up i have and idk how to deal with it.. im new to this hacking phones thing.. battery life..
there seems to be a big desperity between the stock and custom rom.. stock rom says i have 90 percent battery. custom says 66.. i tryed using calibrators on the market.. but dont know if there gimmicks or what... maybe someone has ran into this problem and can help... any and all help will be appretiated.. as i said im a newb with this stuff..

Xperia X8 wi-fi not working(JB Mini Project)

Hello guys,
I am brand new here,as after 3 years of owning a X8 i decided to jump to other ROM,because i was bored of the simple design of his menu and i was so frustrated to stay back with android market when my friends had messenger for facebook e.g.,i had to refresh again and again my opera..and much more apps and games i would like to play.So,i decided to start searching for new ROMs,and i found MIUI,but i wasnt able to find a stable version to dl for my phone.Then i found JB Mini Project,I succeeded on installing it on X8 but there is one thing that wont work in every version of JB i have tried!THE WI-FI!It is really frustrating for me!I am so begginner to those things,but i understand that its not only me that will have this problem and that developers might be working on it right now(I am 3D designer and i know about beta versions of things,even I have to release again and again my creation because of a bug),but i really hope someone had this problem too and found a fix on it..I tried a fix i found in forums with Titanium Backup,but nothing...
Anyone knows anything..just help me out with this.:crying:
Thanks in advance guys!:cyclops:

so noone knows nothing in here?thats sweet

SrSGr said:
so noone knows nothing in here?thats sweet
Click to expand...
Click to collapse
Patience my friend x)
What wifi problem do you have? Unable to detect Adhoc connection?
Have You tried this Kernel + Rom ? (All JB rom is unable to scan adhoc wifi. Except if you make changes to the source and compile it yourself)
If you want to surf the internet but with not using wifi and using a cable, This is a Post for you.

use back stock ROM (just kidding

CKKnot said:
Patience my friend x)
What wifi problem do you have? Unable to detect Adhoc connection?
Have You tried this Kernel + Rom ? (All JB rom is unable to scan adhoc wifi. Except if you make changes to the source and compile it yourself)
If you want to surf the internet but with not using wifi and using a cable, This is a Post for you.
Click to expand...
Click to collapse
Ok the problem is that i try to turn it on but it wont,the toggle bar just moves to be enabled,but it never gets enabled!It just goes back to off possition..With a few words,i cant enable Wi-Fi..So..as i said my friend,i am newbie here,so please try to explain me what i should do with those rom and kernel you send..should i go back to stock rom,reflash this kernel and install this rom?Is this the JB mini project too or something similar and stable without bugs?
Thanks in advance!

SrSGr said:
Ok the problem is that i try to turn it on but it wont,the toggle bar just moves to be enabled,but it never gets enabled!It just goes back to off possition..With little words,i cant enable Wi-Fi..So..as i said my friend,i am newbie here,so please try to explain me what i should do with those rom and kernel you send..should i go back to stock rom,reflash this kernel and install this rom?Is this the JB mini project too or something similar and stable without bugs?
Thanks in advance!
Click to expand...
Click to collapse
Maybe the rom + kernel combination is wrong or the rom is just being buggy.
I just personally liked nAa's work because he release a stable version of every product.
If you want to change into the recommended rom that I just told you;
1. Flash the latest kernel (06)
2. Follow instruction on the kernel post. (/system wipe at recovery before flashing a rom & etc)
3. Flash the rom. Followed by the GAPPS
4. As it said, this is my recommendation steps. I do not guarantee your satisfactory

CKKnot said:
Maybe the rom + kernel combination is wrong or the rom is just being buggy.
I just personally liked nAa's work because he release a stable version of every product.
If you want to change into the recommended rom that I just told you;
1. Flash the latest kernel (06)
2. Follow instruction on the kernel post. (/system wipe at recovery before flashing a rom & etc)
3. Flash the rom. Followed by the GAPPS
4. As it said, this is my recommendation steps. I do not guarantee your satisfactory
Click to expand...
Click to collapse
Thank you,I am gonna test it and I will keep you informed here soon!
EDIT:It works great!ignore my PM.I flashed kernel 5 not 6 and it works like a charm.Thanks a lot for helping me out!

SrSGr said:
Thank you,I am gonna test it and I will keep you informed here soon!
EDIT:It works great!ignore my PM.I flashed kernel 5 not 6 and it works like a charm.Thanks a lot for helping me out!
Click to expand...
Click to collapse
Replied. It because I forgot to mention that 06 has a little bit changes that will make normal jb rom that is not released pior to the kernel release data will not boot

SrSGr said:
Hello guys,
I am brand new here,as after 3 years of owning a X8 i decided to jump to other ROM,because i was bored of the simple design of his menu and i was so frustrated to stay back with android market when my friends had messenger for facebook e.g.,i had to refresh again and again my opera..and much more apps and games i would like to play.So,i decided to start searching for new ROMs,and i found MIUI,but i wasnt able to find a stable version to dl for my phone.Then i found JB Mini Project,I succeeded on installing it on X8 but there is one thing that wont work in every version of JB i have tried!THE WI-FI!It is really frustrating for me!I am so begginner to those things,but i understand that its not only me that will have this problem and that developers might be working on it right now(I am 3D designer and i know about beta versions of things,even I have to release again and again my creation because of a bug),but i really hope someone had this problem too and found a fix on it..I tried a fix i found in forums with Titanium Backup,but nothing...
Anyone knows anything..just help me out with this.:crying:
Thanks in advance guys!:cyclops:
Click to expand...
Click to collapse
hey i had same problem with jbmp when i used jbmp kernel but when i flashed with nAa jb 05 kernel it worked fine..

Phones giving me major problems ever since rooting

Ever since i rooted my phone i have been having and noticing more problems or getting worse and i am just wondering if it is because i rooted it, the phone itself, or maybe it was not rooted the right way or a proper way. I had a friend do it and needless to say hes off in his own little world half the time. Thats besides the point though the problems I am having are the touchscreen does not work half the time i have to tap on it a bunch of times for it to even register another one is i click apps and they will not open once again i have to keep hitting them if they open at all. Apps stop working and force close all the time along with the whole phone just freezing up on me. The keyboard doesnt work half the time and usually when something wont work it will just force close on me. I thought when i rooted my pphone it was gonna work better and be faster but so far i have had nothing but problems and i have had 6 maybe 7 roms flashed onto it and every single one the same thing. before it wasnt great but now it frustrates me so much i wanna just throw it out the window. Any help would be greatly appreciated and im a newbie at this so if you could explain things to me id once again appreciate it.

Rooting a phone gives you access to system files and should not affect the phone functions. Did you do anything after rooting? I think you need to find out how it was rooted.

Perhaps you could tell us which process you used to root?
sent from my PACman Atrix HD

Best way to troubleshoot this is by unrooting the phone by using the RsdLite tool to go stock again. Then go to the Original Developer section and download the rooting method by djrbliss to start over. Thats how i always fix my problems
Sent from my Atrix HD using ProBAM rom and XDA 4 Premium

I bet your issues would be resolved if you flashed a custom ROM. If you don't want to do that though, then you can just RSD Lite back to stock Jellybean. WARNING: You need to look up Myth Tools and use it to unlock your bootloader before you attempt flashing anything of any kind. I have seen several on this forum hard brick due to trying RSD Lite on locked bootloaders.

thank you everyone for the advice i had no idea i could turn my phone back stock i am going to do that now and follow the instructions to re root it that is exactly what i wanted thank you. I have tryed everything my latest rom is pacbam which is nice i like it alot but it still messes up after that i flashed a better kernel and pure performance i found it in the thread of PacBam but they havent done much.

The name of the rom is ProBam my bad

Stick with ProBAM kernel as it works great. All you have to do is to tweak the phone with CrossBreeder and Android Tweaker Mod for play store. Get Init support and your phone will fly
Sent from my Atrix HD using ProBAM rom and XDA 4 Premium

SVLAN said:
Stick with ProBAM kernel as it works great. All you have to do is to tweak the phone with CrossBreeder and Android Tweaker Mod for play store. Get Init support and your phone will fly
Sent from my Atrix HD using ProBAM rom and XDA 4 Premium
Click to expand...
Click to collapse
I posted something earlier about my phone being stuck at the bootload unlocked screen and i came back to this post to try to go back to stock while i wait for a response so maybe ill have a phone but I was using ProBam and that gave me problems also i am now wondering at this point if its just my phone but you said to get CrossBreeder and Android Tweaker what are those exactly and what do they do or help?

Do you have an unlocked bootloader and cwm installed? I assume you do since you're running a custom rom.