Related
Disclaimer:
This will unroot your device! I am not responsible if you brick your phone.
Requirement: Stock 2.3.4 GRJ22
Compatibility: Nexus S i9023
Step 1: Download Android 2.3.6 Gingerbread (GRK39F) update for your Google Nexus S.
Step 2: Connect your Nexus S with your computer to transfer update.zip to the root/parent-directory of your phone.
Step 3: After completing transfer, turn off your Nexus S.
Step 4: Hold down Power + Volume Down until you get into your bootloader (you’ll know when you do) and then go into Recovery mode.
Step 5: Select choose from sdcard.
Step 6: Select the downloaded file.
Step 7: Wait for the update to be installed and then reboot back into Android.
Enjoy!
Please 'Thank' me!
Add me to your circle!
So this ROM has been do for the Nexus S I9023, or it's an OTA ?
It is an OTA or it based with the OTA 2.3.6 of the I9020(a)(t) .. ?
___________________________
edit:
It's an OTA, but the small OTA for the right ROM stock android 2.3.4/.5 and with the recovery android, and not the clockwork.
does this add google wallet?
Hey, I'm seeing a better responsive stock browser after the update.
The issue is discussed here:
http://forum.xda-developers.com/showthread.php?t=873364
The scroll is now usable on pages with big images which wasn't the case before.
I'm so happy, I have a working stock browser again.
Anyone else see the same improvement?
Also do you know of any other bug fixes?
this is OTA update not Full ROM
zamolxees said:
Hey, I'm seeing a better responsive stock browser after the update.
The issue is discussed here:
http://forum.xda-developers.com/showthread.php?t=873364
The scroll is now usable on pages with big images which wasn't the case before.
I'm so happy, I have a working stock browser again.
Anyone else see the same improvement?
Also do you know of any other bug fixes?
Click to expand...
Click to collapse
Would you be so kind and pull that patched Browser.apk from your Phone and post it here?
Will this remove root permissions?
Corra said:
Will this remove root permissions?
Click to expand...
Click to collapse
It says right in the first post. Yes it will.
Sent from my Nexus S using XDA Premium App
brainmaster said:
Would you be so kind and pull that patched Browser.apk from your Phone and post it here?
Click to expand...
Click to collapse
I copied it from my /system/apk and then on my computer. Hope that's ok, I don't have adb atm.
markywylder said:
It says right in the first post. Yes it will.
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
I did it OTA style and it did not remove root for me. Weird.
Although I'll have to flash CWM again, it seems to be broken.
So, the root is possible on the new version 2.3.6 with the update.zip of chendd ?
IT4ALii3EN said:
So, the root is possible on the new version 2.3.6 with the update.zip of chendd ?
Click to expand...
Click to collapse
I'm wondering the exact same thing.
Tried to flash the update.zip thru CWM but it gives an error. Is this normal?. Maybe have the "stock recovery" is a pre-requisite to flash an OTA update. If not, perhaps I missed something to do.
zamolxees said:
I copied it from my /system/apk and then on my computer. Hope that's ok, I don't have adb atm.
Click to expand...
Click to collapse
Awesome.
Just tried to copy it to my /system/app but it doesn't work... anyone have any luck with the new browser?
Arkaknio said:
Tried to flash the update.zip thru CWM but it gives an error. Is this normal?. Maybe have the "stock recovery" is a pre-requisite to flash an OTA update. If not, perhaps I missed something to do.
Click to expand...
Click to collapse
It happened the same here. I think it would give the same with the stock recovery, I already tried. I restored the very first backup I done right after rooting and it worked flawlessly. Maybe this happens when we give root permissions to apps that don't deserve them
However I lost root and I just re-flashed the superuser zip file.
Gesendet mit Tapatalk von Nexus i9023
poyz said:
Awesome.
Just tried to copy it to my /system/app but it doesn't work... anyone have any luck with the new browser?
Click to expand...
Click to collapse
Nope. I tried what you did. Also pushing the app via dab. Deleting data and cache then deleting the apk and pushing the new one. Every time it said the app could not be found cause it was not installed.
Anyone else have any luck with this?
The only other thing I can think of is replacing it in the rom zip file before flashing.
Can anyone extract the boot.img for 2.3.6 and post it up?
I kind of did something silly and need it!
Previous boot images do not work with 2.3.6.
A
Never mind, sorted!
PS: Just used the superuser file and have successfully rooted 2.3.6 and installed CW Recovery 5 too.
I know the dangers, but **** it, I like having root access!
Hi there
Yes I know there are articles about this (damn long articles with strange terms). And I have read through a lot posts about how to root Samsung Galaxy Note - there seems to be 1001 ways to do it but none of them worked on my model KL3 (purchased from Starhub in Singapore)
-> Tried one-click root method - doesnt work anymore for KL3
-> Tried odin method, can't find the place to download the revised ROM (just wondering why will the author still post the URL that is invalid?)
So please anyone out there, if you have done any successful root on KL3, please let me know how you did it.
I am willing to pay you some $$ to get the no-nonsense answer - I have wasted 1 day digging around and I don't want to waste more time.
Tony
http://forum.xda-developers.com/attachment.php?attachmentid=864276&stc=1&d=1327042915
download the above file ... extract and Execute "not-rooted-yet.bat" and follow the instructions.
as simple as that...
it depend on ur firmware, i bought mine from msia..
it was 2.3.6 so i did downgrade to 2.3.5 using odin, after that i use the method describe in this http://forum.xda-developers.com/atta...1&d=1327042915
and happily rooted mine to using RR and others ROM as well..i kept changing ROM when ever they hv new one..haha
u can contact me ..im usig starhub too nine zero six nine seven two nine seven
tonygutao said:
Hi there
Yes I know there are articles about this (damn long articles with strange terms). And I have read through a lot posts about how to root Samsung Galaxy Note - there seems to be 1001 ways to do it but none of them worked on my model KL3 (purchased from Starhub in Singapore)
-> Tried one-click root method - doesnt work anymore for KL3
-> Tried odin method, can't find the place to download the revised ROM (just wondering why will the author still post the URL that is invalid?)
So please anyone out there, if you have done any successful root on KL3, please let me know how you did it.
I am willing to pay you some $$ to get the no-nonsense answer - I have wasted 1 day digging around and I don't want to waste more time.
Tony
Click to expand...
Click to collapse
First downgrade your firmware, then Root it. after applying Root, you can back to Singapore KL3 or watever new ROM you desire, by using CWM or Mobile Odin
Hi sorry to hijack yr thread OP,but i am also from Singapore.i bought a set from singtel.
my firmware are as follow:
PDA:N7000DXKL3
PHONE:N7000DXKL2
CSC:N7000OLBKL2
Baseband:N7000DXKL2
Kernel:2.6.35.7-N7000DXKL3-CL825081 [email protected]#2
i am confused on which one to look at as both pda and phone has different KL version..so which one should i be looking at for rooting purposes and can my current fw be rooted directly?
Look at kernel version. You are on KL3.
Follow dr.ketan's post above.
thanks for replies.
what puzzles me is that,i read dr.ketan's pdf guide and found that N7000DXKL3 is direct rootable.have u tried and it failed?
JxXxn said:
thanks for replies.
what puzzles me is that,i read dr.ketan's pdf guide and found that N7000DXKL3 is direct rootable.have u tried and it failed?
Click to expand...
Click to collapse
Actually xxkl3 was released early that was direct rootable, but some newer version released under kl3 are not rootable
Actuallt kl* are non rootable, except some early kl3. So you shud try to root it directly, if not success you should consider it as non rootable.
Sent from my GT-N7000 using xda premium
Let me try to help you guys.
1. download this zip file to your PC.
2. Uzip.
3. On your Note:
Settings/Applications/Unknown Sources - Check!
Settings/Applications/Development/USB Debugging - Check!
4. Connect USB cable to Note, then to PC
5 Back to your PC folder where you have unpacked the zip
5. Start not-rooted-yet.bat
6. Follow the instructions, and you'll be rooted in a couple of seconds.
Hope this helps.
For those in Singapore...Either post on https://www.facebook.com/SamsungMobileSingapore
or send me a PM and i will help u personally.
Can someone help? While running the not-rooted-yet.bat, got a error message "
--- pushing zImage
failed to copy 'zimage\zImage' to '/data/local/zImage': Permission denied
Thanks...
chasmodo said:
Let me try to help you guys.
1. download this zip file to your PC.
2. Uzip.
3. On your Note:
Settings/Applications/Unknown Sources - Check!
Settings/Applications/Development/USB Debugging - Check!
4. Connect USB cable to Note, then to PC
5 Back to your PC folder where you have unpacked the zip
5. Start not-rooted-yet.bat
6. Follow the instructions, and you'll be rooted in a couple of seconds.
Hope this helps.
Click to expand...
Click to collapse
leongyw said:
Can someone help? While running the not-rooted-yet.bat, got a error message "
--- pushing zImage
failed to copy 'zimage\zImage' to '/data/local/zImage': Permission denied
Thanks...
Click to expand...
Click to collapse
Mmm.
I m from singapore also.
I can tell u, i don't care which version i am.
Normally i will just download the newest version from www.sammobile.com and flash through odin, and on ICS, if i loose my root, i will use http://forum.xda-developers.com/showthread.php?t=1746794. To get my root back. Easy and fast.
Ps: i never do full wipe on ics, i tried once and brick my device.
Sent from my GT-N7000 at the corner of this rounded earth.
Hi All - very new to the forum an very new to Android. I have SGS I9070 DDLK2 (i am from India). Airtel is the provider.
I have been going thru the forum and tried to root the SGS, with the method in the below link:
h t t p: / / techdraginfo . blogspot . com / 2012 / 10 / how-to-root-samsung-galaxy-s-advance
After that i installed the SU and Busybox from Google Play, but on my SU log's it reads - Binary outdated? i tap to update the update being, get error "no root access".. the busybox too i am unable to install (symfile is selected) its gives error "boot recovery" and the install fails. BUT i have both SU and Busybox in my application list? Is my phone rooted ?
I do not want to upgrade to JB, need GB only. as the software that i have will work only on 4.0.x... i need help from the forum to guide me on how to gain complete root access on I9070 with BG as OS... I am very novice at all this - was able to root as there were screen shots in the link that i used for rooting my SGS I9070.
Would appreciate your help... pls pls
Одг: [Q] Root SGS I9070 DDLK2
vidyamit said:
Hi All - very new to the forum an very new to Android. I have SGS I9070 DDLK2 (i am from India). Airtel is the provider.
I have been going thru the forum and tried to root the SGS, with the method in the below link:
h t t p: / / techdraginfo . blogspot . com / 2012 / 10 / how-to-root-samsung-galaxy-s-advance
After that i installed the SU and Busybox from Google Play, but on my SU log's it reads - Binary outdated? i tap to update the update being, get error "no root access".. the busybox too i am unable to install (symfile is selected) its gives error "boot recovery" and the install fails. BUT i have both SU and Busybox in my application list? Is my phone rooted ?
I do not want to upgrade to JB, need GB only. as the software that i have will work only on 4.0.x... i need help from the forum to guide me on how to gain complete root access on I9070 with BG as OS... I am very novice at all this - was able to root as there were screen shots in the link that i used for rooting my SGS I9070.
Would appreciate your help... pls pls
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1660419
Read first two posts carefuly. If you have problem making kernel for step 10, tell me to do it.
Sent from Galaxy S Advance
shut_down said:
http://forum.xda-developers.com/showthread.php?t=1660419
Read first two posts carefuly. If you have problem making kernel for step 10, tell me to do it.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
Thank you for a quick reply. This is the same method i used to root my phone. As i have DDLK2 i went ahead and used the xxld1.tar.md5. after this i downloaded the SU and Busybox? Its the error's i have in SU and Busybox isnt getting installed?
Can you help me with the kernel ?
Thanks in advance...
vidyamit said:
Thank you for a quick reply. This is the same method i used to root my phone. As i have DDLK2 i went ahead and used the xxld1.tar.md5. after this i downloaded the SU and Busybox? Its the error's i have in SU and Busybox isnt getting installed?
Can you help me with the kernel ?
Thanks in advance...
Click to expand...
Click to collapse
Download your stock firmware from www.sammobile.com/firmware or http://samsung-updates.com/tag/firmware/ and attach me kernel.bin.md5 from that file. I will repack it for step 10. You can post that on that thread for rooting, maybe someone else needs it. And it will be easier to find there, then here on this one.
shut_down said:
Download your stock firmware from w w w . s a m m o b i l e . c o m / f i r m w are or h t t p : / / s amsung-updates . c o m / t ag / firmware/ and attach me kernel.bin.md5 from that file. I will repack it for step 10. You can post that on that thread for rooting, maybe someone else needs it. And it will be easier to find there, then here on this one.
Click to expand...
Click to collapse
Thank you. I am Downloading: I9070DDLK2_I9070ODDLJ1_INU.zip (sammobile)
once the download is done will share the kernel.bin.md5. Would you need anything else do let me know. I truly appreciate your help...
vidyamit said:
Thank you. I am Downloading: I9070DDLK2_I9070ODDLJ1_INU.zip (sammobile)
once the download is done will share the kernel.bin.md5. Would you need anything else do let me know. I truly appreciate your help...
Click to expand...
Click to collapse
Just that. After that you will repeat all from that guide for rooting. And by this method you increase binary counter. Triangle away can reset it now for our phone.
shut_down said:
Just that. After that you will repeat all from that guide for rooting. And by this method you increase binary counter. Triangle away can reset it now for our phone.
Click to expand...
Click to collapse
Ok, i downloaded the I9070DDLK2_I9070ODDLJ1_INU.zip from SAMMOBILE
i have a ZIP file and it has 2 contents
1) I9070DDLK2_I9070ODDLJ1_HOME.tar.md5 - 700MB file
2) SS_DL.dll - 2.76 MB fiile
I tried to extract the I9070DDLK2_I9070ODDLJ1_HOME.tar.md5 and i get is the same file again I9070DDLK2_I9070ODDLJ1_HOME.tar.md5.
How do i get kernel.nib.md5 ?
vidyamit said:
Ok, i downloaded the I9070DDLK2_I9070ODDLJ1_INU.zip from SAMMOBILE
i have a ZIP file and it has 2 contents
1) I9070DDLK2_I9070ODDLJ1_HOME.tar.md5 - 700MB file
2) SS_DL.dll - 2.76 MB fiile
I tried to extract the I9070DDLK2_I9070ODDLJ1_HOME.tar.md5 and i get is the same file again I9070DDLK2_I9070ODDLJ1_HOME.tar.md5.
How do i get kernel.nib.md5 ?
Click to expand...
Click to collapse
Oops ! i had to 7zip the file..:victory:
Here you go Sir...
vidyamit said:
Oops ! i had to 7zip the file..:victory:
Here you go Sir...
Click to expand...
Click to collapse
Here, just unzip it. And use for step 10.
shut_down said:
Here, just unzip it. And use for step 10.
Click to expand...
Click to collapse
Thank you soooo much. I really appreciate your help.. one last thing, let me know if the below steps are correct:
i will follow the link that you gave me to root
will download GT-I9070-root.rar, will extract ODIN
will enable USB debugging and mock location on the phone
turn off the phone and put it on download mode
Under PIT file browse for GT-I9070_EUR_XX_8G_20111220_KL6.pit, you have extracted this file before.
Under PDA choos rootkernel.tar.md5
Then check what options are checked (Selected), be sure to UNCHECK (remove selction) Re-Partition, Flash Lock, Phone EFS Clear, Phone Bootloader Update! Only Auto Reboot and F.Reset Time should be checked (Selected)
When this is set just press Start and wait for phone to reboot
Now repeat steps from 4 to 9, with one exception at step 7 I will CHOOSE THE FILE THAT YOU REPACKED FOR ME....
let the phone boot
Install SU / Busybox and Traingle away....
and i will be done - pls let me know.... :fingers-crossed::fingers-crossed::fingers-crossed:
vidyamit said:
Thank you soooo much. I really appreciate your help.. one last thing, let me know if the below steps are correct:
i will follow the link that you gave me to root
will download GT-I9070-root.rar, will extract ODIN
will enable USB debugging and mock location on the phone
turn off the phone and put it on download mode
Under PIT file browse for GT-I9070_EUR_XX_8G_20111220_KL6.pit, you have extracted this file before.
Under PDA choos rootkernel.tar.md5
Then check what options are checked (Selected), be sure to UNCHECK (remove selction) Re-Partition, Flash Lock, Phone EFS Clear, Phone Bootloader Update! Only Auto Reboot and F.Reset Time should be checked (Selected)
When this is set just press Start and wait for phone to reboot
Now repeat steps from 4 to 9, with one exception at step 7 I will CHOOSE THE FILE THAT YOU REPACKED FOR ME....
let the phone boot
Install SU / Busybox and Traingle away....
and i will be done - pls let me know.... :fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
I think you even do not need to use pit file. Yes, that is it. And install Superuser, no SuperSU. I think we had problems with SuperSU, and Superuser worked fine.
Op : so you mail me, i give you the method and you make a new thread? I mean what the fcuk?
:annoyed:
I do not respond to tech support via PM
Shaaan said:
Op : so you mail me, i give you the method and you make a new thread? I mean what the fcuk?
:annoyed:
I do not respond to tech support via PM
Click to expand...
Click to collapse
No - I posted in XDA, one was kind to reply. He also helped me with the Kernel.... i am just following his step by step instructions... I never made any thread... Pls read thru the entire thread...
shut_down said:
... And install Superuser, no SuperSU. I think we had problems with SuperSU, and Superuser worked fine.
Click to expand...
Click to collapse
Can you give more details? Eventually links from Google Play with that Superuser?
Thanks a lot
PS: I use SuperSU now and I think that is not so fine.
R_a_z_v_a_n said:
Can you give more details? Eventually links from Google Play with that Superuser?
Thanks a lot
PS: I use SuperSU now and I think that is not so fine.
Click to expand...
Click to collapse
I use SuperSU on JB now, but on GB I didn't have root access when I used it (didn't work at all). No need to change.
LOL, you can easy find it. Here.
Need to uninstall first SuperSU.
Huh, thinking I use an wrong application , but from what I read, chainfire (SuperSU) update released more than chainsDD tuned, and that's why I asked more details about that.
Here what i read: http://forum.xda-developers.com/showthread.php?t=1704441
shut_down said:
I think you even do not need to use pit file. Yes, that is it. And install Superuser, no SuperSU. I think we had problems with SuperSU, and Superuser worked fine.
Click to expand...
Click to collapse
Hi - i did follow the steps, and also flashed your kernel, but guess its its creating some issues? unable to download Superuser, WIFI is hanging upp and also unable to make calls... any help pls..
vidyamit said:
Hi - i did follow the steps, and also flashed your kernel, but guess its its creating some issues? unable to download Superuser, WIFI is hanging upp and also unable to make calls... any help pls..
Click to expand...
Click to collapse
I know there are issues when you do not go back to stock kernel. You are sure you flashed this stock one I give you?
shut_down said:
I know there are issues when you do not go back to stock kernel. You are sure you flashed this stock one I give you?
Click to expand...
Click to collapse
Yes - very much? I am resetting the device as of now... Was able to install the Superuser but wasnt working properly...
i restarted the phone - was able to do calls... so that is a breather... now as i told i am restoring factory settings... and it is at the Android screen where i touch it and start configurations.... now what next (((
vidyamit said:
Yes - very much? I am resetting the device as of now... Was able to install the Superuser but wasnt working properly...
i restarted the phone - was able to do calls... so that is a breather... now as i told i am restoring factory settings... and it is at the Android screen where i touch it and start configurations.... now what next (((
Click to expand...
Click to collapse
So now everything works fine? Install app superuser from play store, open it and find in options update binary. You will have it I think when you go in left once.
Hello everybody
Will get my S5 mini within 3 days..
Is there any root,that works?!
BR
Sebbe
No one?!
there is no root for the S5 mini and S3 mini VE yet
Success, but KNOX tripped
Chainfire has an autoroot for all version of S5 mini now see http://autoroot.chainfire.eu
++++++++
Danke Schön!!
It worked!!!You´re the MAN
BR
Sebastian
polyconvex said:
Hello,
so I used Chainfire's original CF-Auto-Root for SM-G900H and the Stock recovery files from SM-G800F (G800FXXU1ANG7_DBT Firmware from Sammobile.com). I was able to have root on the Stock firmware using the attached file via Odin.
BUT: IT WILL MAKE KNOX WARRANTY VOID 1.
If anyone else is interested to try:
Download Mode: (VolDn+Home+Power, VolUp)
Odin PDA (AP): cf-auto-root-sm_g800f-kminilte-xxu1ang7.tar.md5
Auto Reboot
Enjoy rooted device.
It might be a good idea to reflash the original stock recovery afterwards as currently no custom recoveries are available. g800forigrecovery.tar.md5
Cheers.
Click to expand...
Click to collapse
Thanks a lot! What did you do to get your flashable .tar.md5 from the auto root g900h? Is there a howto which reveals how to do this?
pen² said:
Thanks a lot! What did you do to get your flashable .tar.md5 from the auto root g900h? Is there a howto which reveals how to do this?
Click to expand...
Click to collapse
Hi,
No there is no howto beyond the standard how to make a custom rom and kernel using android kitchen. I simply analysed the recovery image in CF-Auto-Root and took the hardware relevant files and replaced them with those from the stock recovery of SM-G800F, and set the filesystems and sizes appropriately. Most of the magic happens in executable binaries made by Chainfire that are run automatically when recovery mode is started. I do not have their source code.
Cheers.
Sent from my SM-P605 using XDA Free mobile app
polyconvex said:
Hi,
No there is no howto beyond the standard how to make a custom rom and kernel using android kitchen. I simply analysed the recovery image in CF-Auto-Root and took the hardware relevant files and replaced them with those from the stock recovery of SM-G800F, and set the filesystems and sizes appropriately. Most of the magic happens in executable binaries made by Chainfire that are run automatically when recovery mode is started. I do not have their source code.
Click to expand...
Click to collapse
Thanks for your answer! I was asking because I was hoping to adapt the new G800FXXU1ANGE image from samfirmware but without a howto I won't try this with my s5 mini for the first time (too much worries to brick it :/)
pen² said:
Thanks for your answer! I was asking because I was hoping to adapt the new G800FXXU1ANGE image from samfirmware but without a howto I won't try this with my s5 mini for the first time (too much worries to brick it :/)
Click to expand...
Click to collapse
Hi,
The rooting file above should work even on G800FXXU1ANGE. First flash the new firmware normally via Odin. Then after reboot flash the CF-auto-root from above. Only in the last step to get the original recovery back you need to get that file out of the new firmware package.
I can tell you how to make a odin flashable file with just the original recovery under linux. Copy the original tar.md5 file to /tmp and do the following commands
Code:
tar -xf your_original_firmware.tar.md5
tar -c -H ustar recovery.img > G800ForiginalrecoveryXXU1ANGE.tar
md5sum -t G800ForiginalrecoveryXXU1ANGE.tar >> G800ForiginalrecoveryXXU1ANGE.tar
mv G800ForiginalrecoveryXXU1ANGE.tar G800ForiginalrecoveryXXU1ANGE.tar.md5
I hope this helps.
Cheers.
Sent from my SM-P605 using XDA Free mobile app
polyconvex said:
(...)
Click to expand...
Click to collapse
Thanks a lot! Unfortunately, the XXU1ANGE-File could not be flashed (Odin yielded a "FAIL" multiple times and odin versions), so ANG7 is the most recent working option.
Thank you very much! Worked great for me.
ccarpo said:
Thank you very much! Worked great for me.
Click to expand...
Click to collapse
Hey guys, can you please help out with the SM-G800H version, its the S5 Mini Dual Sim version, I have tried to update the firmware using all the versions on Sammobile but they all fail at system.img.ext4?
polyconvex said:
Hello,
so I used Chainfire's original CF-Auto-Root for SM-G900H and the Stock recovery files from SM-G800F (G800FXXU1ANG7_DBT Firmware from Sammobile.com). I was able to have root on the Stock firmware using the attached file via Odin.
BUT: IT WILL MAKE KNOX WARRANTY VOID 1.
If anyone else is interested to try:
Download Mode: (VolDn+Home+Power, VolUp)
Odin PDA (AP): cf-auto-root-sm_g800f-kminilte-xxu1ang7.tar.md5
Auto Reboot
Enjoy rooted device.
It might be a good idea to reflash the original stock recovery afterwards as currently no custom recoveries are available. g800forigrecovery.tar.md5
Cheers.
Click to expand...
Click to collapse
Thanks, it worked great. Is the last step only required if I want to remove root or is it recommended anyways if I want to stay with root.
neumann said:
Thanks, it worked great. Is the last step only required if I want to remove root or is it recommended anyways if I want to stay with root.
Click to expand...
Click to collapse
Hi,
The last step does not remove root. It reinstates the original recovery partition, so in download mode it goes back to everything official instead of custom. One might need the recovery if something goes wrong and one wants to do a data wipe or cache wipe.
Sent from my SM-P605 using XDA Free mobile app
There is some rooting way working on g800h (dual chip version) ? MIne is brazilian, and i got FAIL "nand write error"...
Thanks anyway!
Anyone? Please... root for G800H the S5 Mini Duos.
Renan00 said:
Anyone? Please... root for G800H the S5 Mini Duos.
Click to expand...
Click to collapse
Rooted firmware G800HXXU1ANGD_SER for SM-G800H duos for Russian region with a lot of languages - version SM-G800H duos you can download here. Attention: It is work perfect for S5mini duos from Russian, but im not tested it with S5mini duos from another regions.
Thanks friend! I Tried and work great! And have the portuguese brazilian language ;D !!!
Renan00 said:
Thanks friend! I Tried and work great! And have the portuguese brazilian language ;D !!!
Click to expand...
Click to collapse
Did u flash the Russian file via Odin? Steps pls
lembeee said:
Did u flash the Russian file via Odin? Steps pls
Click to expand...
Click to collapse
Yes friend... the normal steps to flash:
put in download mode;
flash via odin with "auto reboot" and "f. reset time" ticked...
I recomend to wipe data after flash.
works great!
Hello
Finally Stock 5.0.1 Rooted. Here i attach the Files ...Use it.... No Risk
I personally Tested. And works fine without bugs.
Please Note :- This is Only For Samsung Galaxy Note 4 SM-N910G Only...
Not Support for other Variants
Instructions Inside the rar file.
Updated Info:-
Please rename the file to CF-Auto-Root-trlte-trltedt-smn910g.tar.md5 or Just remove 5.0.1 in the Root file and then use it in Odin.
Sorry for trouble... Its my mistake in renaming the file
Download Link :- Mod Edit: Pay per click links removed, not allowed on xda. {NO NEED TO RENAME FILE}
Please DO NOT MAKE MIRRORS. IF YOU WANT MIRROR ASK ME.
Anybody tried this
Not working odin shows invalid md5
Brothers
Please rename the file to CF-Auto-Root-trlte-trltedt-smn910g.tar.md5
or just remove 5.0.1
sriszone said:
Brothers
Please rename the file to CF-Auto-Root-trlte-trltedt-smn910g.tar.md5
or just remove 5.0.1
Click to expand...
Click to collapse
Perfect now.....rooted
Thank you Bro...good luck
Dr.Ketan Method
- Download SuperSu 2.46 from chainfire and copy to SD
- Switch Off device and reboot to download (Vol down + Home + Power) to get into download mode)
- Get custom recovery (I have used Chenglu's CWM 6.0.5.1)
- Uncheck Auto reboot in Odin and flash custom recovery
- Once flashing pass, reboot device to recovery manually (Vol up + home +power)
- Flash SuperSu zip you copied in step 1
CMW recovery link: http://d-h.st/9ahQ
Dr.Ketan Method also Works... But you will Lose Stock Recovery//
Will this trip the warranty flag?
What features are people using that require root? I just got lollipop on my 910g and wondering if I should root
is there a link that i can use to download without the crap. @sriszone
i have tried downloading N910g-cwm-recovery-6.0.5.1 a number of times from different sites and its always corrupt
Try flashing latest TWRP it will then root Rom once you go into recovery and reboot it will ask if you want to root
Y u guys using custom recovery.... Check the thread guys for cf auto root
sriszone said:
Y u guys using custom recovery.... Check the thread guys for cf auto root
Click to expand...
Click to collapse
Is there a clean link for cf auto root, the original post link is crap, just a simple click and download would be nice instead of that uploding.com.
DaveLTE said:
Is there a clean link for cf auto root, the original post link is crap, just a simple click and download would be nice instead of that uploding.com.
Click to expand...
Click to collapse
Hi Bro
Uploading to Google Drive....Please wait . Will Update the link on my post
sriszone said:
Hello
Finally Stock 5.0.1 Rooted. Here i attach the Files ...Use it.... No Risk
I personally Tested. And works fine without bugs.
Please Note :- This is Only For Samsung Galaxy Note 4 SM-N910G Only...
Click to expand...
Click to collapse
Will this trip Knox?
Absolutely.... There is no way root note 4 without trip knox
sriszone said:
Absolutely.... There is no way root note 4 without trip knox
Click to expand...
Click to collapse
never say never.. they said that about the note 3 and for a while there was a way...
I have faith in the genius of necessity
Why have you made this thread when there is a CF-Autoroot thread already open by the developer himself?
And why do you say no mirrors as if this is anything original to you?