Piece of cake chaps!
Spent a while looking for mounts.. either too flimsy, didn't trust air vent mounts, block the view or the suctions.. well - I wouldn't trust a suction mount with a tablet!
So, I made use of my front Cup Holder, a suction mount, glue and a block of wood
I've been on several test drives, over bumps, sharp turns, braking, accelerating. This mount doesn't move at all, and.. doesn't affect my view or any other dials :good:
I use it for emails, SMS, torque car info and no need for any CD's now!
Related
Can anyone suggest a not too expensive car mount that fits the tmo HD2? the windshield kind, not the vent kind.
NOt sure..but this is the best one!
http://www.proclipusa.com/home/home.aspx?afid=42&admkt=670ca577&gclid=CKTHtJipw6QCFUNM5Qod1Wf8iw
I found a perfect mount at compusa that is made for an iphone but works great on my HD2. can send part number if needed.
Sent from my SGH-T959 using XDA App
I use the Tetrax Xway. It requires a magnet on the back of the case. I initially thought it would be annoying but I positioned it in the very middle of the phone so the phone can spin on it. I can't tell you how much enjoyment being able to spin my phone has been. With a good twirl it can spin for 2 minutes 30 seconds. I really freaked people out when Inception was big as it seemed to never stop spinning like that totem.
But the actual mount attaches to the car's AC vent which is the perfect position. The center console just seems too far away. It can be just to the right of the steering wheel.
An additional benefit is with a neodymium magnet set I got from ThinkGeek I can mount the phone anywhere that's metal. I just take four of the little cylindrical magnets and form a square with them. The phone magnet fits quite well in the divet in the middle of them. I now have a phone mount on the hood of the oven to load recipes while I cook (or watch a movie). It's quite secure, and the magnet won't hurt the phone. Just keep anything with a hard drive away like an iPod.
An interesting possibility would be to buy a cheaper clip on cover from eBay (preferably black) then buy a cheap gps mount. Then glue the case onto the mount. Then you will have an adjustable $10-15 cheap car mount
i wonder if they would make one that fits hd2 that has an otterbox case on it
let me record out of the windshield... ie. let me record what i see when I drive...
I know, it's kind of a weird request, but is there one that will let me do this?
I highly doubt it, there is finally a company just now making a dock for the inc...but still not released yet. youre better off modifying an existing car mount to get that option or make something....can't be too difficult
Sent from my ADR6300 using XDA App
if i remember correctly.. the holster on the htc car dock has the camera cutout so you should be able to use it. the holster mounts to the dock and lets you rotate it to landscape so that should let you see out
I have a mount like this from VZ.. It captures the mount in the scene, but could probably be modded.
Best Buy sells an adjustable universal window mount setup that works perfect. You can virtually adjust it any way to make it fit, and would work great for your application. Plus, the side grips have a nice foam type material that would soak up a lot of vibrations.
luvit said:
I have a mount like this from VZ.. It captures the mount in the scene, but could probably be modded.
Click to expand...
Click to collapse
You could use a drill bit slightly larger than the camera whole. I actually have that verizon clip, and I think a mod would work quite well.
Sent from my ADR6300 using XDA App
No no, it captures the suction cup in the view.. Not the phone cradle.
Check out the M25 Sound dock on amazon. I have one, the angle is adjustable, and it steers out the window.
UnRevoked HTC Incredible
You could always get one of those non-sliding, weighted suction cup mounts that go on your dash then use any mount and place it facing the windshield.
You could always try to eBay a cheap universal mount and cheap DInc case, then super glue them together for a cheap custom fit case
There's a car mount on eBay called the SlipGrip that has a ton of different mounting solutions and custom molded cradles for the DINC in various kinds of 3rd party cases (Otterbox, silicone, VZW case, naked). The suction cup mount has a nice long adjustable arm so you could mount it with the suction cup on your dash rather than the windshield and adjust the cradle so the arm isn't in the shot. The cradle also rotates 180 degrees so you can record vertical or horizontal.
I will sell you one for $50 that is really nice. The cradle is made for the phone and you can suction mount it to your window or glass nightstand table. I will post pics in the morning.
This might not be the right place, but I can't find an answer - is there a car dock that will fit the Seidio 3500 battery? I don't know if the large battery causes any problems with car docks, but I would assume it does...
i use one thats actually for a I*hone. It clips and leaves the camera unobstructed.
So I got the car dock and like everyone else says the quality is great. But it is really hard to find anyplace to mount it if your windshield is far away. So I had to take the dock apart. I did not use the suction base but unscrewed the thumbscrew and just used the mounting clip. I just bolted the clip and part of the swivel to a vertical flat spot in the car. So I do not have much tilt but it work.
Anyway, with that done I realized that I could no longer use the suction base since I needed another clip and swivel. I went looking on the web for parts and found what I think is where Samsung gets some of the parts for the dork. Check out the iGrip Traveler. Looks like the same clip and swivel. So I ordered one. I will let folks know if the clip will connect to the samsung plate. If so I will have a nice car mount and a nice charging desk mount in one.
I have an otterbox and I have been looking for a car mount but none of them are big enough to hold the phone inside the otterbox. Does anybody have any suggestions.
Edit - Wow I am blind. I somehow missed the giant thread already in progress about car mounts. -_-
Ram mount xgrip
Car Dock
I just got an HTC One M8 & also needed a new car dock. I got the iBolt dock from amazon that is universal. I will work with most phones, and ANY case.
Here's the link from Amazon:
http://www.amazon.com/iBOLT-xProDoc...&sr=8-3&keywords=iBolt+Universal+HTC+Car+Dock
The USB cord is reversible so you can have it on the left side, or on the side of a phone. I've had it for almost 3 weeks now & I love it!
Mountek nGroove is dead simple, and can hold just about any smartphone in any case.
As long as your CD slot is in a decent spot (to see the phone will navigating, etc.) and don't use it for CDs, this is a elegantly simple solution. It install in seconds, not sensitive to falling off like suction cups, and I've used it on a variety of rental cars while travelling (although a couple cars I've rented did not have good CD slot placement, such as low and the mount blocked the gearshift).
The nGroove even has a tension adjustment for the ball joint. As most any such joint will loosen over time and become useless without such an adjustment.
http://www.amazon.com/Mountek-nGroove-Universal-Phones-Devices/dp/B004G1L52Q/ref=sr_1_1?ie=UTF8&qid=1424794208&sr=8-1&keywords=cd+slot+phone+mount
redpoint73 said:
Mountek nGroove is dead simple, and can hold just about any smartphone in any case.
As long as your CD slot is in a decent spot (to see the phone will navigating, etc.) and don't use it for CDs, this is a elegantly simple solution. It install in seconds, not sensitive to falling off like suction cups, and I've used it on a variety of rental cars while travelling (although a couple cars I've rented did not have good CD slot placement, such as low and the mount blocked the gearshift).
The nGroove even has a tension adjustment for the ball joint. As most any such joint will loosen over time and become useless without such an adjustment.
http://www.amazon.com/Mountek-nGroove-Universal-Phones-Devices/dp/B004G1L52Q/ref=sr_1_1?ie=UTF8&qid=1424794208&sr=8-1&keywords=cd+slot+phone+mount
Click to expand...
Click to collapse
That is an interesting solution. Does it vibrate very much while driving and can the whole thing rotate to landscape? The reason I need the rotate function is I use polarized sunglasses and when my phone is in portrait I can barely see the screen.
theandies said:
That is an interesting solution. Does it vibrate very much while driving and can the whole thing rotate to landscape? The reason I need the rotate function is I use polarized sunglasses and when my phone is in portrait I can barely see the screen.
Click to expand...
Click to collapse
Any of the mounts vibrate some, at least the ones I've used. In my view, anything that juts or sticks out from the dashboard or windshield is going to shake a little from road vibration. But the Mountek nGroove doesn't vibrate much, and not in a way that effects its function or viewing the screen (such as for navigation).
The mount is on a ball joint, which easily changes from landscape to portrait orientation and vice versa. The ball joint also has a tension adjustment (that you turn with an object like a coin) so you can vary how loose or tight the ball joint movement feels.
Overall, a very slick, simple, yet well though-out solution. And at $20, you don't really have much to lose in trying it, either.
The only (slightly) negative comment I have on the Mountek nGroove, is that the dust flap or bristles that protects/seals your CD slot might (probably) get deformed over time (and it states this in the instructions). In fact on my car, the CD slot dust flap is a felt-like material, and the nGroove actually tore the material is 2 spots due to the way the clamping action works. But the nGroove is always in the CD slot, so I don't really care. Just something I (barely) noticed when I take the mount out.
Well, I'm not sure if you've found your solution already, but I have a tech matte vent car mount from amazon, and that's a pretty good mount.
http://www.amazon.com/iOttie-Holder...3&sr=1-1&keywords=iottie+easy+one+touch+2#Ask
http://www.amazon.com/gp/product/B00GXXHGLE/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Best bang for your buck mount there. I have 2, love them.
DeathmonkeyGTX said:
Ram mount xgrip
Click to expand...
Click to collapse
This is what I use. I just swapped the suction cup for a screw in mount with a flat back and dual locked it to my dash to keep it off of my windshield.
I have this type.
http://www.brodit.com/brodit.html?pn=home
It's the best holder because It charge your phone and you have a free slot in your 12V because it's connected to car battery.
@ KeithN
I used the 14" flexible aluminum cylinder that bolts to the floor. You remove the corner seat bolt, put the thing on, and replace the bolt. Easy peasy and doesn't rattle.
DeathmonkeyGTX said:
@ KeithN
I used the 14" flexible aluminum cylinder that bolts to the floor. You remove the corner seat bolt, put the thing on, and replace the bolt. Easy peasy and doesn't rattle.
Click to expand...
Click to collapse
Very nice. Thanks for sharing!
Montar universal car dock. Best car dock EVER.
https://www.youtube.com/watch?v=CZmbqCIc9K8
Scosche magic mount. Love that thing. I was a bit leery of trusting a magnet to hold my phone, but it holds very well, even in the super bouncy cab of a tractor-trailer.
nuts77 said:
Montar universal car dock. Best car dock EVER.
https://www.youtube.com/watch?v=CZmbqCIc9K8
Click to expand...
Click to collapse
I've never heard of that brand before... hmmm
waynerbbx said:
I've never heard of that brand before... hmmm
Click to expand...
Click to collapse
been using this one since I got my M7. Never even had to remove it to place it again Really, it's a great accessory.
This new mount from Spigen is the best car mount I've ever seen. Mount it right behind the steering wheel and you have a heads up display just below the windshield, at least on the Mazda 3. Perfect.
http://www.spigen.com/products/spigen-car-mount-stealth
It's good but could be better. The sticker on it sucks for the windshield in hot weather. I replaced it with 3m tape.
Car Rental
Would this work well for someone who is looking for a mount to use in rental cars? Not seeing how reusable the adhesive pad is anywhere or if it's going to leave marks that I'll get charged for.
rgs2 said:
This new mount from Spigen is the best car mount I've ever seen. Mount it right behind the steering wheel and you have a heads up display just below the windshield, at least on the Mazda 3. Perfect.
http://www.spigen.com/products/spigen-car-mount-stealth
Click to expand...
Click to collapse
Nice one.. Thanks for sharing
You could use the 3M tape in a rental car. I haven't had any problems with the tape that comes with it.
rgs2 said:
You could use the 3M tape in a rental car. I haven't had any problems with the tape that comes with it.
Click to expand...
Click to collapse
Which one?
Sent from my LG-H815 using Tapatalk
http://www.amazon.com/gp/product/B00EYNRJOE?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
I've been using this $10 mount for a bit over 2 years now, and it has never fallen off my dashboard. If anything, it's hard to pull it off the dash at times if I want to move it somewhere works great, cheap, zero complaints.
ryanpm40 said:
http://www.amazon.com/gp/product/B00EYNRJOE?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
I've been using this $10 mount for a bit over 2 years now, and it has never fallen off my dashboard. If anything, it's hard to pull it off the dash at times if I want to move it somewhere works great, cheap, zero complaints.
Click to expand...
Click to collapse
it says...
The power suction enables you to mount on to almost any surface such as dashboards, metal, glass, plastic and even drywall Silicon lined grid keeps your phone and other devices safe and secure.
A suction attachment seems much more durable than adhesive. temperature won't matter and it can be adjusted as it isn't permanent. An essential feature.
rgs2 said:
This new mount from Spigen is the best car mount I've ever seen. Mount it right behind the steering wheel and you have a heads up display just below the windshield, at least on the Mazda 3. Perfect.
http://www.spigen.com/products/spigen-car-mount-stealth
Click to expand...
Click to collapse
I like this, nice simple, compact design. Easy to install my phone onto it too.
hmmmm I might have to grab one of these, I like the compact design so you cant really tell its there when your phone is not in it
Pro-Clip rules. No Sticky tape. And I prefer portrait mount for Nav. I want to see more of what's ahead than what I'm passing.
Nice but doesn't have Qi support for me... I use my phone a lot in the truck so I have been looking for less hassle with cords for the power... got the bluetooth audio for the nav & music but it needs a power source to run all day.
Amazon sell it for #16.99
http://m.ebay.com/itm/Spigen-Stealth-Cellphone-Car-Holder-Universal-Car-mount-for-Cell-Phone-Devices-/201358824286?nav=SEARCH&varId=500554301058 heres the exact same spigen mount on ebay, 20$ , a much better deal then the 30 they charge on their site.
my favourite mount is the magnetic CD slot mount, like this one, they are amazing.
http://www.amazon.com/Lifetime-Univ...37231&sr=8-11&keywords=magnetic+cd+slot+mount
NICE ONE ~ Like the design. I guess I'll have to ask my dad to buy one of this. He is still using a navigator when driving.