Related
Hi everybody,
I tried yesterday to flash my phone with the new mini CM9 + nAa 04 kernel... It did not work resulting in a soft brick.
I solved this problem by flashing back to the stock rom + kernel using flashtool. My device is now working as before.
After many unfruitful research on the forum, i'm forced to ask you what wrong did I do...
My phone was (and is) configured as follow :
Kernel : stock 2.6.2.9
Rom : Android 2.1
Base Band Version : M76XX-TSNCJOLYM-53404015
Built : 2.1.1.C.0.0
Rooted
Bootloader : unlocked
Today I installed xRecovery (which is not needed if I use the Kernel E15_nAa-ics-04_2.6.29.6-nAa-ics-04).
Is it problematic if I want to use the mini CM9 rom ?
How did I do :
I started by flashing the kernel using flashtool and with the latest version kernel E15_nAa-ics-04_2.6.29.6-nAa-ics-04.
The manipulation was successful and kernel was working well.
Then, after having backed up all my settings, apps, contacts, rom and wiped off the data factory settings, I started to flash the rom with CWM (the rom had been stored before on my SD card).
Once the installation finished, the phone reboot... and reboot .... and reboot, etc...
It was only able to display the nAa kernel screen (boot loop), but nothing more.
Finally, I flashed it back to stock version to use it again... OUff
I was a bit scared by the idea of having a hard brick but finally it was just a soft brick.
What do you think about my experience ? I know many of you think that people who do not have necessary skills to do it should not do it ^^ but I want to learn and to make my phone a bit more flexible and fast.
Thank you in advance !
Nico
P'titbateau said:
Hi everybody,
I tried yesterday to flash my phone with the new mini CM9 + nAa 04 kernel... It did not work resulting in a soft brick.
I solved this problem by flashing back to the stock rom + kernel using flashtool. My device is now working as before.
After many unfruitful research on the forum, i'm forced to ask you what wrong did I do...
My phone was (and is) configured as follow :
Kernel : stock 2.6.2.9
Rom : Android 2.1
Base Band Version : M76XX-TSNCJOLYM-53404015
Built : 2.1.1.C.0.0
Rooted
Bootloader : unlocked
Today I installed xRecovery (which is not needed if I use the Kernel E15_nAa-ics-04_2.6.29.6-nAa-ics-04).
Is it problematic if I want to use the mini CM9 rom ?
How did I do :
I started by flashing the kernel using flashtool and with the latest version kernel E15_nAa-ics-04_2.6.29.6-nAa-ics-04.
The manipulation was successful and kernel was working well.
Then, after having backed up all my settings, apps, contacts, rom and wiped off the data factory settings, I started to flash the rom with CWM (the rom had been stored before on my SD card).
Once the installation finished, the phone reboot... and reboot .... and reboot, etc...
It was only able to display the nAa kernel screen (boot loop), but nothing more.
Finally, I flashed it back to stock version to use it again... OUff
I was a bit scared by the idea of having a hard brick but finally it was just a soft brick.
What do you think about my experience ? I know many of you think that people who do not have necessary skills to do it should not do it ^^ but I want to learn and to make my phone a bit more flexible and fast.
Thank you in advance !
Nico
Click to expand...
Click to collapse
Your hardware and software seems alright to me.
Steps: Don't bother about xRecovery. From stock 2.1...
Root again
Flash nAa-ics kernel
Install MiniCM9 and Gapps from first post of MiniCM9 thread
FULL WIPE -- YOU MUST DO THIS
WIPE DALVIK-CACHE TOO
Reboot and have fun
Sent from my X8 using Tapatalk 2
Flash the latest baseband ans try again
Sent from my E15 using Tapatalk 2
Full Wipe will solve the problem.
Sent from my E15i using xda app-developers app
Hi,
Thanks for your replies.
So I don't understand what was wrong as I completely wiped the system prior to flash the Rom.
I proceeded exactly like that :
1.Wipe data factory
2.Wipe cache
3.Wipe dalvik-cache
4.Format system
5.Format cache
6.Format data
7.Rom installation
8.Flash Gapps
I think I have done all the necessary steps to make it working ...
I was maybe not enough patient after installation ?
I'm going to try again today (now I know how to recover from a soft brick ).
Thank you all again.
P'titbateau said:
Hi,
Thanks for your replies.
So I don't understand what was wrong as I completely wiped the system prior to flash the Rom.
I proceeded exactly like that :
1.Wipe data factory
2.Wipe cache
3.Wipe dalvik-cache
4.Format system
5.Format cache
6.Format data
7.Rom installation
8.Flash Gapps
I think I have done all the necessary steps to make it working ...
I was maybe not enough patient after installation ?
I'm going to try again today (now I know how to recover from a soft brick ).
Thank you all again.
Click to expand...
Click to collapse
Good job dude!
just try and try lolZ
maybe you miss something like flash or root..
libera powaemm
It works ! My phone is now booting and I see the CM9 blue droid :highfive:
Special thanks to developers who allow us to have better software !
And thank you for the support you brought me.
congratulation!
P'titbateau said:
It works ! My phone is now booting and I see the CM9 blue droid :highfive:
Special thanks to developers who allow us to have better software !
And thank you for the support you brought me.
Click to expand...
Click to collapse
well well!
enjoy it! :laugh::laugh:
having the same problem
P'titbateau said:
It works ! My phone is now booting and I see the CM9 blue droid :highfive:
Special thanks to developers who allow us to have better software !
And thank you for the support you brought me.
Click to expand...
Click to collapse
So, what step u miss? I also having the same problem. Can tell me your steps? dying for CM9 in my X8 too T-T
slyzerx said:
So, what step u miss? I also having the same problem. Can tell me your steps? dying for CM9 in my X8 too T-T
Click to expand...
Click to collapse
just do what spyder-x said dude!
:laugh::laugh:
Same problem... when i try to install it again I get an error and it says my device is 16i insted of 15i ...
Then I had to flash different rom 3 times to get it working...
Didn't wipe cashe and it worked : )
first instal minicm 3.0.4
after that install minicm 3.0.5(or any nightlie) without any wiping!.
HELP!!! MY PHONE LOOKS LIKE BRICKED!!! I have a Galaxy Ace rooted with a stock rom installed without carrier customization. Even after uninstalling a few apps the performance did not look like I was supposed to expect. So, after taking a look at XDA developers I found out the StockLite v7.1. So I decided to install it following the procedures exactly as described. After rebooting, Samsung logo appears and after about 7-10 minutes the screen looks like turned on but without any image/logo. Even after waiting several minutes (more than 30 minutes), the screen looks like turned on but neither shows any other image nor the main Android screen. I am afraid I bricked my phone
Wipe data and cache then reboot.
If not the try re-flasing the rom
If you still can't get it to boot then flash stock rom with odin(search xda for a guide)
Sent from the cracked screen of my GALAXY Ace.
As long as u see Samsung logo when it starts up I don't think its bricked. Can you still go into CWM?
Sent from my GT-S5830D using xda premium
atrotta said:
HELP!!! MY PHONE LOOKS LIKE BRICKED!!! I have a Galaxy Ace rooted with a stock rom installed without carrier customization. Even after uninstalling a few apps the performance did not look like I was supposed to expect. So, after taking a look at XDA developers I found out the StockLite v7.1. So I decided to install it following the procedures exactly as described. After rebooting, Samsung logo appears and after about 7-10 minutes the screen looks like turned on but without any image/logo. Even after waiting several minutes (more than 30 minutes), the screen looks like turned on but neither shows any other image nor the main Android screen. I am afraid I bricked my phone
Click to expand...
Click to collapse
Wipe data/factory reset
Wipe cache
Wipe dalvik cache
Flash the rom
Enjoy
[Q] Its ur ace 5830 ? Or its 5830 i/m?
Maybe thats the problem,check about phone and tell me
Sent from GALAXY Ace SGII v9~
Make sure it's S5830 not s5830i
Sent from my GT-S5830 using xda app-developers app
atrotta said:
HELP!!! MY PHONE LOOKS LIKE BRICKED!!! I have a Galaxy Ace rooted with a stock rom installed without carrier customization. Even after uninstalling a few apps the performance did not look like I was supposed to expect. So, after taking a look at XDA developers I found out the StockLite v7.1. So I decided to install it following the procedures exactly as described. After rebooting, Samsung logo appears and after about 7-10 minutes the screen looks like turned on but without any image/logo. Even after waiting several minutes (more than 30 minutes), the screen looks like turned on but neither shows any other image nor the main Android screen. I am afraid I bricked my phone
Click to expand...
Click to collapse
Blackstard said:
Wipe data/factory reset
Wipe cache
Wipe dalvik cache
Flash the rom
Enjoy
[Q] Its ur ace 5830 ? Or its 5830 i/m?
Maybe thats the problem,check about phone and tell me
Sent from GALAXY Ace SGII v9~
Click to expand...
Click to collapse
None of them. Its 5830B. I've already attempted to wipe cache/dalvik cache before posting my request of help . Anyway I will try it again. Thank you!
transilvanianhunger said:
As long as u see Samsung logo when it starts up I don't think its bricked. Can you still go into CWM?
Sent from my GT-S5830D using xda premium
Click to expand...
Click to collapse
Thank you for the good news (at least it is not bricked) . What do you mean with "go into CWM"?
Clock Work Mod recovery (CWM)
Manvendra05 said:
Clock Work Mod recovery (CWM)
Click to expand...
Click to collapse
No, I am not able to go into CWM anymore, even after fashing a new stock ROM and I was wondering the reason why it is still happening. I just flashed a new stock ROM and I am still not able to go into CWM recovery. My idea was to flash a new stock ROM and try to flash the StockLite again going into the CWM recovery as this ROM only flashes into CWM. Any idea?
atrotta said:
No, I am not able to go into CWM anymore, even after fashing a new stock ROM and I was wondering the reason why it is still happening. I just flashed a new stock ROM and I am still not able to go into CWM recovery. My idea was to flash a new stock ROM and try to flash the StockLite again going into the CWM recovery as this ROM only flashes into CWM. Any idea?
Click to expand...
Click to collapse
I dont know if 5830 B is compatonle with this rom,better flash a stock rom trough odim before u brick the pone.
regards~
Sent from GALAXY Ace SII v9~
atrotta said:
No, I am not able to go into CWM anymore, even after fashing a new stock ROM and I was wondering the reason why it is still happening. I just flashed a new stock ROM and I am still not able to go into CWM recovery. My idea was to flash a new stock ROM and try to flash the StockLite again going into the CWM recovery as this ROM only flashes into CWM. Any idea?
Click to expand...
Click to collapse
If you reflash the stock rom with Odin, it flashes the stock recovery back(you lose CWM).
What chipset does the s5830B have? What frequency did it have on the sticker?
Flash a rom for s5830B from Odin, and don't use a one package use the full one with separate files.
HI, my gnote is stuck in samsung logo while restarting,
if i should Reflash stock ROM with ODIN which ROM i should select, pls help me out
gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI, KERNEL- SPEEDMOD
Hi there,
Are you still able to go CWM? if you are still able to, make a Nandroid backup, wipe dalvik cache and cache partition and reboot recovery and system and check if your phone's able to bypass the Samsung log after. Give it a time as well to wait.. perhaps 10 mins or so.
By the way I'm just curious, what did you do to make your phone stuck to it's samsung logo in the first place?
still same prob
Thanks for the quick reply yes im still able to go to cwm 1. wiped dalvik 2. wiped cache partition 3. rebooted recovery and system
still phone's unable to bypass the Samsung logo
i just flashed call recorder zip from cwm after that im facing this problem pls help me
Can you post call recorder thread link you tried to flash?
Sent with L0VE
baz77 said:
Can you post call recorder thread link you tried to flash?
Sent with L0VE
Click to expand...
Click to collapse
i dont have the link but i can give u the file attached
sunilkm77 said:
Thanks for the quick reply yes im still able to go to cwm 1. wiped dalvik 2. wiped cache partition 3. rebooted recovery and system
still phone's unable to bypass the Samsung logo
i just flashed call recorder zip from cwm after that im facing this problem pls help me
Click to expand...
Click to collapse
Try installing the main rom you had without doing "wipe data/factory reset", but with dalvik cache and cache wipe.
ok, I am not pro enought to figure out what's happening in zip.
Id recommend factory reset on safe kernel, or reflashing rom, then reflash safe kernel.
Considering I have no clue on zip, a clean install might be called for. On safe kernel and safe kernel recovery a format system/data might be needed to fully clean this stuff out. But I am not sure about that.
Why do you need call recording anyway?
edit: all at own risk ofc
Sent with L0VE
Moon2 said:
Try installing the main rom you had without doing "wipe data/factory reset", but with dalvik cache and cache wipe.
Click to expand...
Click to collapse
can u pls provide me the link for Main rom
hone info- gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI,
sunilkm77 said:
can u pls provide me the link for Main rom
hone info- gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI,
Click to expand...
Click to collapse
you can go to this thread: http://forum.xda-developers.com/showthread.php?t=1424997, courtesy of our good 'ol doc ketan.
letters_to_cleo said:
you can go to this thread: http://forum.xda-developers.com/showthread.php?t=1424997, courtesy of our good 'ol doc ketan.
Click to expand...
Click to collapse
Thanks for the link but im confused which ROM to install coz there are so many,
sunilkm77 said:
Thanks for the link but im confused which ROM to install coz there are so many,
Click to expand...
Click to collapse
hmm....which region or country are you in by the way?
letters_to_cleo said:
hmm....which region or country are you in by the way?
Click to expand...
Click to collapse
India
Flash kl3 india from post #2 of above said thread(first line on my signature is same)
After flashing successfully you may face force closes, dont worry and just reboot in recovery and wipe cache and data. It shiuld b solved.
Sent from my GT-N7000 using xda premium
i tried http://forum.xda-developers.com/showpost.php?p=29846310&postcount=2
now my phone is fine time to install all software's :") thanks a lot
I have to use pc odin to fix the problem
I think i wipe too many time while flashing.
Like 2 times wipe cache and 2 times wipe battery stats etc
Sent from my GT-N7000 using xda premium
my galaxy note was having its update installed last night....then rebooting was to be done...when i pressed ok..rebooting began but it is stuck in samsung logo....
the update was from software update option in phone itself.
Was your device rooted?
Swyped From My Flavoured JellyCore.
rep:
sahilarora2003 said:
was your device rooted?
Swyped from my flavoured jellycore.
Click to expand...
Click to collapse
no it was not!!! I was using update option from phone itself!!
aatmaz said:
no it was not!!! I was using update option from phone itself!!
Click to expand...
Click to collapse
On what firmware was your note before update (e.g. 2.3.5, 2.3.6, 4.0.3, etc) and how long did you wait? Try rebooting first either with battery pull or without.
Just flash any GB ROM (Find it on first link on my signature, post #2)
and wipe cache and data from recovery.
Dont wipe on existing ROM, may be you are on ICS after update.
rep:
kopitalk said:
On what firmware was your note before update (e.g. 2.3.5, 2.3.6, 4.0.3, etc) and how long did you wait? Try rebooting first either with battery pull or without.
Click to expand...
Click to collapse
i was using ICS so must me 4.0.3 not sure!!
You have two option, one as i said in previous post
OR
Flash safe kernel (like hydracore/speedmod) using PC odin
then wipe cache and data from recovery, but you have to reset counter later.
rep : thanx
dr.ketan said:
You have two option, one as i said in previous post
OR
Flash safe kernel (like hydracore/speedmod) using PC odin
then wipe cache and data from recovery, but you have to reset counter later.
Click to expand...
Click to collapse
THANX Dr. but i am not a experienced developer.... had flashed my galaxy ace couple of times...
it would be great if u explain me in simpler way .... :fingers-crossed:
If you are not experienced then i recommend
visit this post
http://forum.xda-developers.com/showpost.php?p=20963718&postcount=2
download and flash any GB ROM using PC odin. Steps are already mentioned there.
after flashing (you will find force closes, dont worry for that)just enter to recovery by vol up + home +power)
and wipe cache and data
your device will boot normally
Then
visit this post
http://forum.xda-developers.com/showpost.php?p=20963707&postcount=1
download and flash any ICS ROM you like and flash same way
BUT DONT WIPE after flashing ICS(if you have followed as said above, you won't need to wipe after flashing ICS), if you want to wipe flash safe kernel first.
rep: thanx
dr.ketan said:
If you are not experienced then i recommend
visit this post
http://forum.xda-developers.com/showpost.php?p=20963718&postcount=2
download and flash any GB ROM using PC odin. Steps are already mentioned there.
after flashing (you will find force closes, dont worry for that)just enter to recovery by vol up + home +power)
and wipe cache and data
your device will boot normally
Then
visit this post
http://forum.xda-developers.com/showpost.php?p=20963707&postcount=1
download and flash any ICS ROM you like and flash same way
BUT DONT WIPE after flashing ICS(if you have followed as said above, you won't need to wipe after flashing ICS), if you want to wipe flash safe kernel first.
Click to expand...
Click to collapse
thanx dr.. it went all well and now i am gonna flash ics rom... hope it will go well too..
one more thing... are u a medical doctor?? i am a medical student too.. final years in MBBS.
if u can please provide me some great medical apps...
once again thanx!!
aatmaz said:
one more thing... are u a medical doctor?? i am a medical student too.. final years in MBBS.
if u can please provide me some great medical apps...
once again thanx!!
Click to expand...
Click to collapse
yes,
I am ENT surgeon.
dr.ketan said:
yes,
I am ENT surgeon.
Click to expand...
Click to collapse
So your a phone doctor as well huh?!
Sent from my GT-N7000 using xda app-developers app
fr3ker said:
So your a phone doctor as well huh?!
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Indeed he is
dr.ketan said:
yes,
I am ENT surgeon.
Click to expand...
Click to collapse
which custom rom do u recommend for galaxy note??
I have never used custom rom
rep:
dr.ketan said:
I have never used custom rom
Click to expand...
Click to collapse
ok!! but i flashed a stock rom. but then phone apps and other apps seems not to be working. error messages like
" calendar storage has stopped working" "android.phone app has unfortunately stopped to work" are comming and i cant have display while calling and cant recive calls as no display is shown. HELP!!
This is common when flashing GB ROM on ICS
though let me know what exactly you did. If you are on GB ROM then reboot in recovery and wipe cache and data will solve it, but if you are on ICS dont do it on stock kernel.
rep:
dr.ketan said:
This is common when flashing GB ROM on ICS
though let me know what exactly you did. If you are on GB ROM then reboot in recovery and wipe cache and data will solve it, but if you are on ICS dont do it on stock kernel.
Click to expand...
Click to collapse
thanks for ur support.. i changed its CSC code after i flashed ICS stock rom and my NOTE was brand new i had just to install my apps again but there was a backup..
THANX DOC!!
I am not able to turn on my device after i've installed the STOCK ROM with ODIN.(I had to do this due to a hard brick) I've tried it like a thousand times. The booting progress is stopped when the samsung logo is displayed (over and over again). I have tried many Firmwares ( 2 of which is DDkQ6 and DDKQ8..these two were working perfectly before THE BRICKING took place).
What did you do to brick the phone?
"What's my problem? You."
Chiraglokhre said:
I am not able to turn on my device after i've installed the STOCK ROM with ODIN.(I had to do this due to a hard brick) I've tried it like a thousand times. The booting progress is stopped when the samsung logo is displayed (over and over again). I have tried many Firmwares ( 2 of which is DDkQ6 and DDKQ8..these two were working perfectly before THE BRICKING took place).
Click to expand...
Click to collapse
Factory reset from recovery
Tapatalk 2-vel küldve az én GT-S5830-ről
CallMeVentus said:
What did you do to brick the phone?
"What's my problem? You."
Click to expand...
Click to collapse
1)I wanted to try out the stock firmware 2.3.6 (DDKQ8)..installed correctly ..was working fine
2) A) then i wanted to go back to Cyanogenmod 10.1 (wich i was using before STOCKING)
B)i go to recovery...install cwm 5.0.2.6...** it wouldnt work/start(stuck in logo with GREEN triangle). ** and nothing else also would start.even the 2.3.6 stock rom.
C)Then i stock it again and go directly into the recovery and i install cwm 6.0.1.4 ...it would start BUT show me *cant mount cache*
D)Then i install cyanogen mod 7...wont start....slimbeanV1 wont work....and etc....NOTHING ELSE IS WORKING
3)So i STOCK it again..this time with 2.3.4 (DDKQ6) (same version when i bought from store)..this is just showing samsung logo over and over agin.
OH AND YA I EVN TRIED INSTALLING IT FROM A TOUCH RECOVERY. DINT WORK
entreaties andgmHn
Gildan said:
Factory reset from recovery
Tapatalk 2-vel küldve az én GT-S5830-ről
Click to expand...
Click to collapse
I tried this. including in stock recovery,cwm 6 and some touch recover also.
Chiraglokhre said:
I tried this. including in stock recovery,cwm 6 and some touch recover also.
Click to expand...
Click to collapse
I would install CWM 5 do everything again with ODIN and the stock firmware to get the phone back . Wonder if that would works ?
Have you tried flashing a full package firmware (e.g. DXKPB)?
"What's my problem? You."
CallMeVentus said:
Have you tried flashing a full package firmware (e.g. DXKPB)?
"What's my problem? You."
Click to expand...
Click to collapse
I will try it. hope it works:good::good::good::good:
IT DID NOT WORK :'(
Chiraglokhre said:
I will try it. hope it works:good::good::good::good:
IT DID NOT WORK :'(
Click to expand...
Click to collapse
Then I'm sorry.
"What's my problem? You."
Chiraglokhre said:
I am not able to turn on my device after i've installed the STOCK ROM with ODIN.(I had to do this due to a hard brick) I've tried it like a thousand times. The booting progress is stopped when the samsung logo is displayed (over and over again). I have tried many Firmwares ( 2 of which is DDkQ6 and DDKQ8..these two were working perfectly before THE BRICKING took place).
Click to expand...
Click to collapse
try downloading te ops file again, as well as the stock rom, and make sure u are using latest odin. sometimes those files can get corrupt. i faced same problem before
Hartik said:
try downloading te ops file again, as well as the stock rom, and make sure u are using latest odin. sometimes those files can get corrupt. i faced same problem before
Click to expand...
Click to collapse
WILL TRY :good::good::good::good:
CallMeVentus said:
What did you do to brick the phone?
"What's my problem? You."
Click to expand...
Click to collapse
I TRIED MOST OF THE ROMS!! I TRIED MOST OF THE STOCK FIRMWARES. EVEN TRIED ALL OF MY BACKUP FILES.
THE ONLY THING WORKING IS -THE APOCALYPSE ROM.:cyclops: (at least with this i can manage..but i dont like the apocolypse as it is very old)
AND THATS NOT ALL. THE G-SENSORS, PROXIMITY SENSORS etc ARE NOT WORKING:crying:
CAN U HELP ME INSTALL ATLEAST - **[ROM][ICS][CM9] Smooth Custom CM9 for Galaxy Ace! [2013.06.23] [ 1 2 ] Thread By: Vadim Shved**.....WICH I REALLY REALLY LIKED.(THIS WAS THE LAST SUCCESSFUL ROM THAT I INSTALLED BEFORE THE BRICKING TOOK PLACE)
THANKS
Chiraglokhre said:
I TRIED MOST OF THE ROMS!! I TRIED MOST OF THE STOCK FIRMWARES. EVEN TRIED ALL OF MY BACKUP FILES.
THE ONLY THING WORKING IS -THE APOCALYPSE ROM.:cyclops: (at least with this i can manage..but i dont like the apocolypse as it is very old)
AND THATS NOT ALL. THE G-SENSORS, PROXIMITY SENSORS etc ARE NOT WORKING:crying:
CAN U HELP ME INSTALL ATLEAST - **[ROM][ICS][CM9] Smooth Custom CM9 for Galaxy Ace! [2013.06.23] [ 1 2 ] Thread By: Vadim Shved**.....WICH I REALLY REALLY LIKED.(THIS WAS THE LAST SUCCESSFUL ROM THAT I INSTALLED BEFORE THE BRICKING TOOK PLACE)
THANKS
Click to expand...
Click to collapse
try the latest CM10.1 for galaxy ace, it has soooo many less bugs, and is very smooth
How to format INTERNAL STORAGE?
Can ny body teach me how to format the internal memory? (any other method than using cwm>mounts and storage>etc) (OTHER WAY/ METHOD)
Chiraglokhre said:
Can ny body teach me how to format the internal memory? (any other method than using cwm>mounts and storage>etc) (OTHER WAY/ METHOD)
Click to expand...
Click to collapse
Wipe data/factory reset, wipe cache, wipe dalvic cache, provided, you haven't used any a2sd scripts that move dalvic cache to sd-ext, etc.
Sent from my GT-S5830 using xda premium
Chiraglokhre said:
Can ny body teach me how to format the internal memory? (any other method than using cwm>mounts and storage>etc) (OTHER WAY/ METHOD)
Click to expand...
Click to collapse
You can go to settings > storage (when you phone is power on )and restore by default your device (factory reset) too