Related
Hey hey hey big doubt. Motorola Triumph has a got a pretty decent miui rom that's fully working with all features. I was wondering if it's possible to flash the rom on ideos x6 and their variants ? as Motorola triumph is a twin of x6? kindly reply!!
well there is one big diff between moto n the other x6 , that is its a cdma phone
Thought by an mi 410 user frm punjab
Truimph Port
I have been able to port this rom from the triumph forums
http://androidforums.com/triumph-al...-1-11-25-triumph-113011-2-gb-2-3-7-based.html
I know have miui build 1-11-25, but still now fm radio. Have tried all that I have found on the net to fix but with no luck. Has anyone else had luck getting fm to our phone?
The port is stable but I dont see any difference from the one that tj_style made
cowsgo said:
I have been able to port this rom from the triumph forums
http://androidforums.com/triumph-al...-1-11-25-triumph-113011-2-gb-2-3-7-based.html
I know have miui build 1-11-25, but still now fm radio. Have tried all that I have found on the net to fix but with no luck. Has anyone else had luck getting fm to our phone?
The port is stable but I dont see any difference from the one that tj_style made
Click to expand...
Click to collapse
When are you uploading the ROM ? Radio does not work in the MIUI 1.11.11 build also. And not a major issue as long as the ROM is stable.
have you tested all other applications esp google apps ? What about voice quality and volume ?
please do upload the rom...
Will upload it once I get home tonight at work and have no access to a site to put it up.
Voice quality and volume so far I have found no issues. The only google apps that I use are maps, market and voice so I didnt load gapps just grab these only. The build has market already. I also have loaded Napster's kernel which works fine with my phone.
File Upload
Hey guys,
Try this link https://docs.google.com/open?id=0B6a1DYyFKfu1MGQ1YmFlZmEtMmRmNS00ZjE0LTliNTQtMmQ2OWY5NDYwMzM1
Remember, I just ported this..all the credit goes to Isaacj87 over at Android forums.
cowsgo said:
Hey guys,
Try this link https://docs.google.com/open?id=0B6a1DYyFKfu1MGQ1YmFlZmEtMmRmNS00ZjE0LTliNTQtMmQ2OWY5NDYwMzM1
Remember, I just ported this..all the credit goes to Isaacj87 over at Android forums.
Click to expand...
Click to collapse
Flashed, working superb. Call volume is perfect so far, need to observe.
move this thread to Dev section
vijayar said:
Flashed, working superb. Call volume is perfect so far, need to observe.
move this thread to Dev section
Click to expand...
Click to collapse
Hey I am currently on 1.11.11. Can I upgrade and if I don't wipe anything will it preserve my apps data SMS and so on. What about the incoming call volume issue is it fixed and what about HD recording in camera with uckernal.
Sent from my CSL-MI410 using XDA App
nayneshdev said:
Hey I am currently on 1.11.11. Can I upgrade and if I don't wipe anything will it preserve my apps data SMS and so on. What about the incoming call volume issue is it fixed and what about HD recording in camera with uckernal.
Sent from my CSL-MI410 using XDA App
Click to expand...
Click to collapse
yes just update this via CMW.
cowsgo said:
Hey guys,
Try this link https://docs.google.com/open?id=0B6a1DYyFKfu1MGQ1YmFlZmEtMmRmNS00ZjE0LTliNTQtMmQ2OWY5NDYwMzM1
Remember, I just ported this..all the credit goes to Isaacj87 over at Android forums.
Click to expand...
Click to collapse
please make a thread for this rom in devlopment section.
Flashed this seems to be working quite good but I still have the incoming call volume issue. HD recording is good. I did wipe cache and dalvik but still the call volume issue persists. What am I doing wrong?
Sent from my CSL-MI410 using XDA App
Flashing it today to check. will report back if facing any problems.
cowsgo said:
Hey guys,
Try this link https://docs.google.com/open?id=0B6a1DYyFKfu1MGQ1YmFlZmEtMmRmNS00ZjE0LTliNTQtMmQ2OWY5NDYwMzM1
Remember, I just ported this..all the credit goes to Isaacj87 over at Android forums.
Click to expand...
Click to collapse
Thanks Cowsgo for porting this, very happy with this particular ROM, more stable than 1.11.11. Incoming call Volume issue was there fo rthe first few calls but now it has normalised. I also flashed Napstar UC V5, everything is working smoothly. I was also able to record a video at 720P. Good work keep it up.
BTW do let me know how did you port this from ? Keen to start myself on this route !
hi dude,
i want to flash this rom how cn i do it, as i hve rooted my device mi410 nd im on stock rom ...
alll other functionable like HDMI,FM, GAMES 3D....?
pls help me..
I've flashed this rom, its better than 1.11.11 i think, no screen blinking during incoming call, but still happen for outgoing, volume... i think i did not press the volume button during my last call still with tj style kernel, not yet test oc5 for miui, worry abt video recording, i've test oc5 with edowar cm7.2, working good
Sent from my CSL-MI410 using XDA App
Wrong spelling... not oc5 but uc5
Sent from my CSL-MI410 using XDA App
vijayar said:
Thanks Cowsgo for porting this, very happy with this particular ROM, more stable than 1.11.11. Incoming call Volume issue was there fo rthe first few calls but now it has normalised. I also flashed Napstar UC V5, everything is working smoothly. I was also able to record a video at 720P. Good work keep it up.
BTW do let me know how did you port this from ? Keen to start myself on this route !
Click to expand...
Click to collapse
Hi vijayar, i have also flashed this rom but even after quite a few incoming calls i am still facing the incoming low call volume issue. how come it is resolved in your device, what did you do ? Are you reporting that the HD rec. is working fine with UC V5 ? What was your exact flash method ?
nayneshdev said:
Hi vijayar, i have also flashed this rom but even after quite a few incoming calls i am still facing the incoming low call volume issue. how come it is resolved in your device, what did you do ? Are you reporting that the HD rec. is working fine with UC V5 ? What was your exact flash method ?
Click to expand...
Click to collapse
Well the incoming call volume is working most of the time well, some random calls still has problems of low volume but most are normal unlike CM7 which always has low volume (not tried latest updated, but for this problem the ROM is a fantastic build by Edowar). Yes I did a 720p Video record for about a minute, it seems okay. What I did was complete wipe of Dalvik, cache and factory and then updated to this new one. I also flashed UC V5.
Vijayar, r u porting frm cm7? If frm miui 1.11.11, do i need full wipe? Including data wipe?
Sent from my CSL-MI410 using XDA App
Hello Developer, I'm try to porting CM 9.1.0 From Galaxy 2 http://get.cm/get/3Fa following from this tutorials .
Tha base rom is Lezo Ics 2012 (abenagiel) From Here
But i'm found some Bug:
-Wifi can't turn on
-Camcorder still FC
-Softkey Backlight not glowing
Still Working
-Camera
-Data 3G/2G etc
-many other..
thats great dude.... atleast you started to work arround (I am planning but not getting time)
regarding WiFi and Softkey, have you checked with Aben or Elol, they may suggest you solution, you can check with Tanuj...
Anyway Best luck and post some screenies of your port :good:
showcheap said:
Hello Developer, I'm try to porting CM 9.1.0 From Galaxy 2 http://get.cm/get/3Fa following from this tutorials .
Tha base rom is Lezo Ics 2012 (abenagiel) From Here
But i'm found some Bug:
-Wifi can't turn on
-Camcorder still FC
-Softkey Backlight not glowing
Still Working
-Camera
-Data 3G/2G etc
-many other..
Click to expand...
Click to collapse
I think it is better to use cm rom then using lezo for the porting
vivekb said:
thats great dude.... atleast you started to work arround (I am planning but not getting time)
regarding WiFi and Softkey, have you checked with Aben or Elol, they may suggest you solution, you can check with Tanuj...
Anyway Best luck and post some screenies of your port :good:
Click to expand...
Click to collapse
Thanks vivek.. it's just my experiment.
i'll try to porting CM10, but still failure
Tanuj Chhibber said:
I think it is better to use cm rom then using lezo for the porting
Click to expand...
Click to collapse
I try to install many varies rom on this forum (ICS), but just lezo can installed on my device
showcheap said:
Thanks vivek.. it's just my experiment.
i'll try to porting CM10, but still failure
I try to install many varies rom on this forum (ICS), but just lezo can installed on my device
Click to expand...
Click to collapse
Dude any success in porting.....
Hy all.
I've been watching this board for quite a long time but in the end I decide to ask for advice from someone that knows.
I'm searching for ideal rom that has working device parts like tv-out. I kinda dount I'll find any 4.3 tom with this feature if not pease suggest me some other latest build. I tried sevral latest rom on CM base (CM 10.1, 10.2 Slim beam 4.2.2 4.3, C-rom v4) but with no luck, thus many of those are very buggy in basic operatios. Currently using updated Helly Bean 4.3.
Thanks
CM currently doesn't have DeviceParts working. And because a lot of 4.3 roms draw from CM sources, none of them will have that feature fully working.
Odd though, CM10.1 and Slim 4.2.2 should have it working
Sent from my GT-P7510 using Tapatalk HD
Soryuu said:
CM currently doesn't have DeviceParts working. And because a lot of 4.3 roms draw from CM sources, none of them will have that feature fully working.
Odd though, CM10.1 and Slim 4.2.2 should have it working
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
Thanks for respond Soryuu, I see your point but I was unable to make DeviceParts working on Cm 10.1 and slim 4.2.2. though I really like every rom I tried (might be cause I'm still new ith those ).
I'm lost...
But when i`m using CM 10.1.2 stable the deviceparts worked as well ... what was your prob???
elektroda said:
Thanks for respond Soryuu, I see your point but I was unable to make DeviceParts working on Cm 10.1 and slim 4.2.2. though I really like every rom I tried (might be cause I'm still new ith those ).
I'm lost...
Click to expand...
Click to collapse
freakymod2120 said:
But when i`m using CM 10.1.2 stable the deviceparts worked as well ... what was your prob???
Click to expand...
Click to collapse
When I connect phone with tv with cable, I just can't enable tv.out setting under menu, it stays gray. Cable is fine, I've been using it with my very old rom (2.2) before and decide to refresh my rom, that is why I asked in the first place.
Am I missing something or?
Okay i think you should report it here ...
http://forum.xda-developers.com/showthread.php?t=2039755&page=569
elektroda said:
When I connect phone with tv with cable, I just can't enable tv.out setting under menu, it stays gray. Cable is fine, I've been using it with my very old rom (2.2) before and decide to refresh my rom, that is why I asked in the first place.
Am I missing something or?
Click to expand...
Click to collapse
freakymod2120 said:
Okay i think you should report it here ...
http://forum.xda-developers.com/showthread.php?t=2039755&page=569
Click to expand...
Click to collapse
I probabl should, but I don't bave privilegies to post in dev section. Othervise I would share my experience and report qute few bugs with different roms which could help solving them.
elektroda said:
I probabl should, but I don't bave privilegies to post in dev section. Othervise I would share my experience and report qute few bugs with different roms which could help solving them.
Click to expand...
Click to collapse
Just keep posting and helping others in the Q and A section, you'll get to your ten posts in no time don't spam though, that doesn't go down well...
But once you do have ten posts, as freakymod said report this in the dev thread and see if someone knows what's going on.
Sent from my GT-P7510 using Tapatalk HD
Ah okay sorry i haven`t that you have <10 postings ,sorry...
Maybe you can describe the bug or missing function and i post it in teh dev thread for you ...
elektroda said:
I probabl should, but I don't bave privilegies to post in dev section. Othervise I would share my experience and report qute few bugs with different roms which could help solving them.
Click to expand...
Click to collapse
Alright, thank you both. I'll probably do that. Freaky I'll send you PM so that way we could rool things up a bit.
Cheers
Okay no prob i wait for the PM ...:good:
elektroda said:
Alright, thank you both. I'll probably do that. Freaky I'll send you PM so that way we could rool things up a bit.
Cheers
Click to expand...
Click to collapse
Hi all i'm new !
I'll explain
Today I installed CM10 on my xperia x8 the nAa kernel which ending in .32
Everything is normally installed, the phone started but WiFi won't work
Whenever I activate it, it turns off automatically and I can't connect to the Internet.
Do you have a solution?
Sorry for my bad english, i'm french^^
Maybe you've flashed wrong one, flash nAa-5 or 6 kernel because it uses newer wifi driver.
Same problem.
Unofficial CyanogenMod 10 + nAa-jb-06
I have the E15_2.6.32.61-nAa-06, so i must to install 05 ?
I tested with 05, wifi won't work :/
Oh it work !
Test with my Team ROM, Faktory JB Team and you see that work ;D
Sir Roven said:
Test with my Team ROM, Faktory JB Team and you see that work ;D
Click to expand...
Click to collapse
Same problem. What i do wrong?
I downloaded the CM10 4.1.2 RELEASED and it worked
Lolgblo said:
I downloaded the CM10 4.1.2 RELEASED and it worked
Click to expand...
Click to collapse
Please, can you give the link of rom?
a_moiseev said:
Please, can you give the link of rom?
Click to expand...
Click to collapse
Yes http://d-h.st/x0u
Hey guys, i want to ask if somebody hav the same problem like me, i got my internet connection cut-off where the H sign at network bars just vanished... but the data traffic is on.. how could this be?
Sent from my E15i by using my hands
Hi all !
Good news for Viber users using p990/su660 with custom rom.
In this case CM11
Some of the new versions of Viber have issues with 4.4
This version instead works great: http://www.mediafire.com/download/amr605hegba0cec/com.viber.voip-48-v4.1.1.10.apk
UPDATE 15/09: Latest version 5.0.0.4090 with video calls has no big issues with CM11 ! In case you test yourself, please report
Enjoy it.
PS. In case you need to downgrade, uninstall previous version first!
dev>null said:
Hi all !
Good news for Viber users using p990/su660 with custom rom.
In this case CM11
Latest version of Viber has issues with 4.4
This version works great: http://www.mediafire.com/download/amr605hegba0cec/com.viber.voip-48-v4.1.1.10.apk
Enjoy it.
PS. Uninstall previous version first!
Click to expand...
Click to collapse
i have latest version of viber and don't have problems except delayed messages if phone goes in sleep mode. So,do you mean that on that version delay does not exist?
xperia u20i said:
i have latest version of viber and don't have problems except delayed messages if phone goes in sleep mode. So,do you mean that on that version delay does not exist?
Click to expand...
Click to collapse
I have crashes with latest version on CM11 by hjunii / hjunii's kernel modded by qzwcc when I try to record an audio message or call.
Which I've seen in forums it's a common issue with Viber and custom roms.
Not with this one
Great that it works
Works on my ZTE V9
Works on my ZTE V9 with CM11 too
Thanks for the tip
September 15 - Latest version works !!!
I was going to update this thread today, since just I just tried the latest version of Viber, with video calls...and IT WORKS on LG P990/660 running tonyp's CM11 !!!
Hopefully they're supporting CyanogenMod after becoming the official OS of OnePlus phones
Anyway...I thought you may want to try as well :good:
Good luck !
good, but so heavy and laggy app for our P990 (
@Mhden2x I agree
Infact it's my first app in hibernate list (second is Skype) on Greenify, since I need to use it, but not to stay always on !
Give it a try...
yeah, I use greenify, but still when viber / facebook wake up... disaster! can't even answer a call. I guess we can't do anything else for our device, it's a miracle we have CM11 already, thanks to the best developers ever here! hehe
Mhden2x said:
yeah, I use greenify, but still when viber / facebook wake up... disaster! can't even answer a call. I guess we can't do anything else for our device, it's a miracle we have CM11 already, thanks to the best developers ever here! hehe
Click to expand...
Click to collapse
totally agree with you ! :good:
the latest version working on cm11 is viber 5.4.1 ... the highest versions does not ... (