Hello,
I am getting an error "MOD UptestEX MFC Application has stopped working" for lg optimus black when I try to update to Gb through KDZ. Can some one help please...?
xain.and said:
Hello,
I am getting an error "MOD UptestEX MFC Application has stopped working" for lg optimus black when I try to update to Gb through KDZ. Can some one help please...?
Click to expand...
Click to collapse
search and read!
Install msxml.msi
installed already nothing happens, any step by step solution or correct procedure?
xain.and said:
installed already nothing happens, any step by step solution or correct procedure?
Click to expand...
Click to collapse
background info please
Windows, which version, etc.
List everything you could remember.
Read through this post carefully... There are several guys experienced the same problem and managed to get it fix.
http://forum.xda-developers.com/showthread.php?t=1186406&page=1
flash with smartflash tool :/
v10 flash
Can I flash any v10 firmware on my lg l5 from belgium.... cause there is no open europe v10 firmware.... I have no service right now!!!
Hey guys my friend give me his phone a Optimus Black and it has a Wifi error,when you try to turn the wifi on it just says error
i tryed like everything changing the kernel and the rom but it still says error.Had someon a same expirience?
jolejolev said:
Hey guys my friend give me his phone a Optimus Black and it has a Wifi error,when you try to turn the wifi on it just says error
i tryed like everything changing the kernel and the rom but it still says error.Had someon a same expirience?
Click to expand...
Click to collapse
Try flashing .fls file of latest
sekhar13515 said:
Try flashing .fls file of latest
Click to expand...
Click to collapse
Can you pls give me a link im new in the Motorola forum
Hello guys,
I can't flash my p970 because there is nothing in COM port when i am in s/w update mode , there are a few post about this problem but no one says how it's been resolved . please help
cwinter1 said:
Hello guys,
I can't flash my p970 because there is nothing in COM port when i am in s/w update mode , there are a few post about this problem but no one says how it's been resolved . please help
Click to expand...
Click to collapse
install drivers for p970 from lg support website.
patelumangv said:
install drivers for p970 from lg support website.
Click to expand...
Click to collapse
I did this many times.
cwinter1 said:
I did this many times.
Click to expand...
Click to collapse
May be you can try on other PC.
i tried this too , i think is a hardware problem after all. but i can entry in s/w update mode without battery so a connection exist.
Hello,
One week ago, I was using my phone as usual when suddenly froze and I pulled the battery, then I was stuck in boot loop so I decided to go into download mode and reflash it, but I accidentally flashed H811N instead of H811H , now my phone is hard bricked !! " No charging / No download mode / Nothing at all " , is there any way to fix it ?
Thanks
There's a fix a couple posts down. Have you tried that yet?
mjoecarroll said:
There's a fix a couple posts down. Have you tried that yet?
Click to expand...
Click to collapse
Yes I tried but I got some errors ! I don't know why, I think it might be because of I did not find a stock dump (img) of H81110H ?
What errors did you get? Which build did you use?
Also, try this. It doesn't look like he has the system.img available, but you could always try to pull it out of the kdz. There's some directions online.
mjoecarroll said:
What errors did you get? Which build did you use?
Also, try this. It doesn't look like he has the system.img available, but you could always try to pull it out of the kdz. There's some directions online.
Click to expand...
Click to collapse
Thanks a lot for your answer, what it really happened that I manged to make it boot to bootloader for the first time, then I tried to flash the KDZ file, but it stuck on 9% giving me an error, then I tried to go to download mode again but now it gives me blank screen !! ..
mo5br said:
Thanks a lot for your answer, what it really happened that I manged to make it boot to bootloader for the first time, then I tried to flash the KDZ file, but it stuck on 9% giving me an error, then I tried to go to download mode again but now it gives me blank screen !! ..
Click to expand...
Click to collapse
Were you able to try the files I gave you there?
And do you know which error it gave you? You might want to try to fastboot a recovery (put a recovery in the same folder as your adb and fastboot, name it recovery.img, run command "fastboot boot recovery.img", then installing a rom from the recovery), although I haven't tried his method yet so I am not sure if that is even possible.
mjoecarroll said:
Were you able to try the files I gave you there?
And do you know which error it gave you? You might want to try to fastboot a recovery (put a recovery in the same folder as your adb and fastboot, name it recovery.img, run command "fastboot boot recovery.img", then installing a rom from the recovery), although I haven't tried his method yet so I am not sure if that is even possible.
Click to expand...
Click to collapse
I actually the error was about flashing a different version then I tried for another time gave an error of different size of firmware.
When I try to connect the phone to my computer, it appeares as "qhsusb_bulk" and doesn't recognize the phone.
Now I can't turn it on or charge it, or even getting to download mode ! ??
Try using the Google Android adb drivers. Keep trying different USB ports until it works.
mjoecarroll said:
Try using the Google Android adb drivers. Keep trying different USB ports until it works.
Click to expand...
Click to collapse
I tried but still not recognizable, I tried all ports in my computer but still not working .. any other ideas ?
mo5br said:
I tried but still not recognizable, I tried all ports in my computer but still not working .. any other ideas ?
Click to expand...
Click to collapse
Something similar happened on my G2 at one point, so everything I'm saying is going off that.
Firstly, what was the situation of your phone prior to this? Was it rooted? Did it tend to overheat? What are the first three numbers on your serial number?
mjoecarroll said:
Something similar happened on my G2 at one point, so everything I'm saying is going off that.
Firstly, what was the situation of your phone prior to this? Was it rooted? Did it tend to overheat? What are the first three numbers on your serial number?
Click to expand...
Click to collapse
Well I did a really strange thing, in which I put my phone in the freezer, and I got into the download mode again. When I start to flash the KDZ file, I got an error " Erro Code = 0x2000, TOT antirollback version is smaller than device version. " , any ideas how can I solve it ?
mo5br said:
Well I did a really strange thing, in which I put my phone in the freezer, and I got into the download mode again. When I start to flash the KDZ file, I got an error " Erro Code = 0x2000, TOT antirollback version is smaller than device version. " , any ideas how can I solve it ?
Click to expand...
Click to collapse
That usually means you were on marshmallow and tried to downgrade to lollipop. You sure you had lollipop?
mjoecarroll said:
That usually means you were on marshmallow and tried to downgrade to lollipop. You sure you had lollipop?
Click to expand...
Click to collapse
I am actually not sure which version I had !! any ideas ?
Did your notifications show up on your lockscreen?
mjoecarroll said:
Did your notifications show up on your lockscreen?
Click to expand...
Click to collapse
I think I was on Lollipop (5.0) , since i did a quick research and I found out that ..
mo5br said:
I think I was on Lollipop (5.0) , since i did a quick research and I found out that ..
Click to expand...
Click to collapse
What build versions did you use to try to fix your phone?
mjoecarroll said:
What build versions did you use to try to fix your phone?
Click to expand...
Click to collapse
Unfortunately, I don't know I am so sorry...
mo5br said:
Unfortunately, I don't know I am so sorry...
Click to expand...
Click to collapse
At this point, I'd recommend trying the method with every version on opensource.lge.com newer than the version you tried that gave you the previous error.
mjoecarroll said:
At this point, I'd recommend trying the method with every version on opensource.lge.com newer than the version you tried that gave you the previous error.
Click to expand...
Click to collapse
I'll try and let you know what would happen, thanks a lot
mjoecarroll said:
At this point, I'd recommend trying the method with every version on opensource.lge.com newer than the version you tried that gave you the previous error.
Click to expand...
Click to collapse
Unfortunately, nothing worked with me ? what's the next step now ? :crying:
I have honor 3c (h30u10). Unlocked its bootloader, Rooted the set, installed miui through TWRP. Working flawlessly.
Handed over the set to one of my friends. He returned it in bootloop. What i tried to recover was:
- Tried to install miui again with TWRP but it failed.
- Tried to format internal partitions but also failed
- All the partitions showing 0 MB size.
TWRP shows E: Unable to mount '/cache'
E: Unable to mount '/data'
E: Unable to mount '/system'
E: Unable to mount '/cache'
E: Unable to mount internal storage
and Internal Storage 0MB
- Tried to falsh stock (ROM_H30-U10_V100R001C900B108_SIGNED) rom to re-lock the bootloader.
- The flashing process starts but failed at 100 percent with following error message:
BROM ERROR: S_SECURITY _AC_REGION_NOT_FOUND_IN_SECROIMG (6128), MSP ERROR CODE: 0X00
- It is worth mentioning that when i flashed "H30-U10 V100R001C900B127" with SPFT it flashed 100% Successfully with green circle. But when i switched on the phone it vibrates only.
--Screenshot is attached for reference.
Here are the guies which i tired to follow with no sucess
> http://www.carbontesla.com/2014/08/...-u10-b108-stock-jb-firmware-v100r001c900b108/
Please help......
i dont know if this will help but i had updated from b127 to b320 and unlocked+rooted it and after that while flashing a software called magisk it got softbricked and was not going past the honor logo... i tried to flash the stock b108 rom using 'format and upgrade' option in spf tools and now the phone did not even turn on just vibrated every 15 20 seconds... after hours of searching saw a guy using the download option to flash the stock rom... i tried it and it worked... got my phone back to life... phew...
So as for u , may be the download option works instead of all format
gopinaidu77 said:
So as for u , may be the download option works instead of all format
Click to expand...
Click to collapse
already tried bro but no luck.
I have visited many technicians in the market. According to them it can only be resolved by J-TAG but no body knows how to do that. Anybody here at XDA if knows about J-TAG or something like that please help.
zaheer_rose said:
already tried bro but no luck.
I have visited many technicians in the market. According to them it can only be resolved by J-TAG but no body knows how to do that. Anybody here at XDA if knows about J-TAG or something like that please help.
Click to expand...
Click to collapse
Currently do you have access to TWRP ? or just black screen?
zaheer_rose said:
already tried bro but no luck.
I have visited many technicians in the market. According to them it can only be resolved by J-TAG but no body knows how to do that. Anybody here at XDA if knows about J-TAG or something like that please help.
Click to expand...
Click to collapse
JTAG is a bit expensive. It's a piece of electronic device that will pair with the phone to fix any critical problem.
miststudent2011 said:
Currently do you have access to TWRP ? or just black screen?
Click to expand...
Click to collapse
Currently the set vibrates only when connected with pc during flashing
gopinaidu77 said:
JTAG is a bit expensive. It's a piece of electronic device that will pair with the phone to fix any critical problem.
Click to expand...
Click to collapse
How much expensive bro?
zaheer_rose said:
Currently the set vibrates only when connected with pc during flashing
Click to expand...
Click to collapse
so that means your device is still recognised by PC?
zaheer_rose said:
How much expensive bro?
Click to expand...
Click to collapse
Around $30-50 depends on phone model.
miststudent2011 said:
so that means your device is still recognised by PC?
Click to expand...
Click to collapse
It vibrates only bro. I will post latest results within three days after my exam.
zaheer_rose said:
It vibrates only bro. I will post latest results within three days after my exam.
Click to expand...
Click to collapse
Carry on with your exams ping me once you finish your examinations.
All the best. :good:
zaheer_rose said:
It vibrates only bro. I will post latest results within three days after my exam.
Click to expand...
Click to collapse
But when are back ,please make a new thread with ur issue as title .
Did you solve your issue??
hassanjavaid8181 said:
Did you solve your issue??
Click to expand...
Click to collapse
no bro. its still the same issue.
zaheer_rose said:
no bro. its still the same issue.
Click to expand...
Click to collapse
is it recognizing by pc?
I know its an old thread
I am having the same issue
If I download files of stock rom with DA DL with Checksum I get checksum failed error and if I do it with it I get 6028 secro ac region error
Please help