Hello everyone. problem with my 7300, hangs on the splash screen Samsung, PC does not detect it, the unknown device, nekak drivers do not help, try to pick up Odin nepoluchaetsya, rekaveri running 6.0.1, I have a suspicion that the problem is in the connector on the motherboard if the way podpoyatsya directly to the board and fill in the necessary files into memory?
pl2303 converter has catfish, any information would be very grateful, Sorry for the my anglisky
Related
Help me...
Why KIES stuck in this mode "Prepare for firmware upgrade"..
and nothing happen.. i have tried to leave it for more than one hours, and nothing just happen..
i checked the download traffic from my PC and there seems not downloading anything..
help..
Solution to preparing firmwire upgrade components
Hello Everyone,
I'm here to solve this problem which everyone have been facing for upgrading firmwire via Kies. First of all let me tell you that i own a Samsung Galaxy S2 (I9100) and had this problem and did everything possible to solve it like installing virtual os (xp), trying on original windows xp sp3, modifying services, installing drivers, usb debugging and all sorts of stuff. But in the end i found the solution as i vowed not to go to samsung service centre and not to use odin to root and solve this myself and help others solve it.
If you are stuck with "preparing firmwire upgrade components" screen, just do this to solve it --> TRY WITH Wi-Fi.
As you all know Samsung Kies is one of the worst piece of software ever made, something's wrong with kies with broadband connection. So just connect your phone with wifi in your laptop for internet and usb connection to phone with "usb debugging" turned off. Do not plug in any usb devices like pen drive, wireless mouse nano receiver, etc and make sure wifi has good signal and battery is full before you start.
I'm pretty sure this would solve the problem, and if it does i wouldn't mind getting a donation of 2 dollars at my paypal email [email protected] for me trying to help others and for need. Hope it makes sense. If you need any further help, let me know by email at the address mentioned. Bye.
I think that you have to let down kies and try to flash your phone with odin.
hi i received a i9000t, that is in 2.1 and i need to update to 2.3.3, but the tricky parts is that usb doesn't work and it does not have 3 key combo, so it doesn't go to recovery or download, what is odd is that as well as a i9100 water damaged i received, both phones have a clean and well soldered usb conector, but always usb not recognized, but if i use a uart conection like an unlocking box with a rj45 cable it reads phone info, but that is no good to flash or anything.(just to let this info know).
but my question is can i, or should i try to update through cwm, already rooted it with z4root, i would like an official 2.3.3, but i think not possible, only modified rom, as well mobile odin doesn't support 't' version of i9000, so what should or can do?
thank you very much indeed for help or guide
atv
Have you installed the Samsung drivers on your computer?
Edit, my bad, didn't see you can't get in download mode
Maybe this would help you:
http://www.addictivetips.com/mobile/fix-3-button-combo-download-recovery-mode-in-samsung-galaxy-s-gt-i9000/
If you are more technical you could try this:
http://forum.xda-developers.com/showthread.php?t=1604707
*EDIT* : Crap, just noticed im in the I9305 section.. This should be in the 9300 section.
Mods please delete
Hi,
Having a problem since a few weeks with my s3.
Normally i could connect wiht my phone to any pc,, without any problems. Either it be unix, win, whatever...
Suddnely it stopped working, only thing that happens is charging when i connect it to my pc. Different cables tested, original one, etc..
Connecting it to different pc's resulted in a no go.. so it must be phone related.
No windows pop up, or anything!!
So I figured: Let's install a new rom.
Tried ultima 15 rom, got a different CM rom now (sentinel)... all to no avail.
Is it possible that this has something to do with my radio?
rom info:
android: 4.3
baseband: CEEMG2
Anyone have an idea what to do? Even ADB push ain't working..
If its not a driver issue then its the cable or the phone .
Radio has zero effect on USB cable .
What model phone is it ??
S3 I9300
Defintely not a cable issue.
Charging works via pc, just no data pop up on phone or pc or anything
Hello! I know, I know. There are a lot of different threads according to this problem but I read almost everything and still cannot fix my problem.
A few weeks ago when I tried to charge my phone the message: Your cable is not compatible with your device. Please use the orginal HTC-cable or your phone get damaged. appeared.
until that moment I thought it doesnt matter if I use a htc cable or a cable from another brand. I mean they changed all the ports to a micro-usb-port. Just to give you the opportunity to use every cable.
Well, after that I tried to connect my phone with my computer and the HTC Car app appeared and bluetooth got switched on. WHY?
I did a factory reset and flashed my rom again. Now I can connect my HTC One with my computer and on the screen of my computer appears the message:
"Device not recognized "Windows has stopped this device because it has reported problems. (Code 43)"
(and its unable to mount otg-usb in recovery)
I tried different cables. I tried to (un)install and update the HTC drivers. I tried different computer. I tried turning usb debugging off and on! I tried to clean the USB-pins! nothing works! :crying:
(Unfortunately I have no old backup with my new TWRP v2.6.)
I just have been abroad for 6 months and dont wanna loose all my photos and videos. Any ideas?
I think its a software issue on my phones. Maybe something with my partitions. But I dunno what I can wipe without deleting all my photos and videos.
THANKS
Why the repost? http://forum.xda-developers.com/showthread.php?t=2677823
Suggestions already provided.
cause I have still no solution. I know that I could upload 32GB. im pretty sure somebody could help me to solve the problem with error 43
Hey folks,
Shortly before throwing this peace of **** (SM-J105H/DS, Android 5.1.1, Kernel-Version 3.10.65-8738110, Build LMY47V.J105HXWU0APL2, Android-Safetypatch 1st July 2016) away, after pissing & ****ting on it a few times, and sending this ****ed up phone back to the assholes from Samsung, maybe you can help me somehow:
it is IMPOSSIBLE to connect this ****phone in ANY WAY by USB to my computer (Windows 10 64-bit)...!!!!!!!
- I've tried ALL USB ports, I've also installed new drivers like suggested here: (please google "Samsung J1 Mini Galaxy USB drivers")
- I've installed this ********ed program KIES3 which tells me that my phone is not compatible with this crappy software (I've started KiES3 as admin),
- I've also installed Smart FUUCK Switch, which also(!!!) tells me that my phone is not compatible to this ****ed up program (although Android 5.1.1. is installed on it).
If I stick this piece of **** into my computer it installs some drivers, but it does NOT install any MTP/PTP drivers which are obviously necessary to enter the phone as a memory stick.
WTF?!?!?!?!
Please help.
sure the cable is OK?
try different pc?
give it to a pro?
if still trouble
then:
pee&poo on it and send it back to Korea !