I've split the kdz file to cp and ap files. When I flash using Smartflash it will not load completely. I get an error "Magic number does not coinside"
wyrman said:
I've split the kdz file to cp and ap files. When I flash using Smartflash it will not load completely. I get an error "Magic number does not coinside"
Click to expand...
Click to collapse
wiered ,, make sure you have the bin file in the 1st space ,,fls in the 2nd
rrgrrg said:
wiered ,, make sure you have the bin file in the 1st space ,,fls in the 2nd
Click to expand...
Click to collapse
Nope. Didn't work bud.
rrgrrg said:
wiered ,, make sure you have the bin file in the 1st space ,,fls in the 2nd
Click to expand...
Click to collapse
Nope.
Sv: Problems Flashing V30C
rrgrrg said:
wiered ,, make sure you have the bin file in the 1st space ,,fls in the 2nd
Click to expand...
Click to collapse
I do it the other way
Cheers
RomWiz said:
I do it the other way
Cheers
Click to expand...
Click to collapse
I spoke too soon. Didn't work at all. I flashed V30B by mistake
Hi I also tried to flash V30c...
But got security error
The problem is that it doesn't support CWM
While converting Kdz to bin and fls u might have entered CWM enable yes in the cmd ...
Try to convert again with CWM no......
Sent from my LG-P970 using xda app-developers app:thumbup:
glsnjoseph said:
Hi I also tried to flash V30c...
But got security error
The problem is that it doesn't support CWM
While converting Kdz to bin and fls u might have entered CWM enable yes in the cmd ...
Try to convert again with CWM no......
Sent from my LG-P970 using xda app-developers app:thumbup:
Click to expand...
Click to collapse
In my case I did not inject CWM. I didn't get a security error. I got "Magic number does not concide" what ever that means
download the kdz and check the md5sum, before flashing with SFT, a corrupt file can get error.
yes, stock rom ics v30.x does'nt support CWM, you can download NOOBY repack pure with CWM in thread dev.
I all !
I've got a problem: When connecting my OB to the computer in "Software Upgrade" mode, I got a blue screen ! On Windows 8 and XP as well...
Help please
poloxo53 said:
I all !
I've got a problem: When connecting my OB to the computer in "Software Upgrade" mode, I got a blue screen ! On Windows 8 and XP as well...
Help please
Click to expand...
Click to collapse
have you installed usb drivers lg , change port usb, check your chipset driver on pc, it's a problem with Windows, plug in S/W is just for install usb communication device and use SFT
YkZ_1967 said:
download the kdz and check the md5sum, before flashing with SFT, a corrupt file can get error.
yes, stock rom ics v30.x does'nt support CWM, you can download NOOBY repack pure with CWM in thread dev.
Click to expand...
Click to collapse
KDZ from this thread bud.
YkZ_1967 said:
have you installed usb drivers lg , change port usb, check your chipset driver on pc, it's a problem with Windows, plug in S/W is just for install usb communication device and use SFT
Click to expand...
Click to collapse
Hi !
You're all right ! Indeed it's a problem with USB3.0 legacy windows driver... All my other drivers are up to date.
I finally manage to use SFT on the only USB2.0 port I have on my Laptop ! :good:
Thank
wyrman said:
KDZ from this thread bud.
Click to expand...
Click to collapse
test with this kdz :
V30C
http://csmgdl.lgmobile.com/swdata/WEBSW/LGP970/ASTLTL/V30c_00/V30C_00.kdz
V30B Europe Open
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP970/ANEUTL/V30b_00/V30B_00.kdz
Do not inject CWM /!\
* a link of Bin/Fls by DaemonOnx : V30B => http://d-h.st/Zu7
KDZ V30B => http://d-h.st/zkU
YkZ_1967 said:
test with this kdz :
V30C
http://csmgdl.lgmobile.com/swdata/WEBSW/LGP970/ASTLTL/V30c_00/V30C_00.kdz
V30B Europe Open
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP970/ANEUTL/V30b_00/V30B_00.kdz
Do not inject CWM /!\
* a link of Bin/Fls by DaemonOnx : V30B => http://d-h.st/Zu7
KDZ V30B => http://d-h.st/zkU
Click to expand...
Click to collapse
Files not found bud. What version of V30C is this? Sing or India?
wyrman said:
Files not found bud. What version of V30C is this? Sing or India?
Click to expand...
Click to collapse
V30C Sing
=> http://forum.xda-developers.com/showthread.php?t=2031161
YkZ_1967 said:
V30C Sing
=> http://forum.xda-developers.com/showthread.php?t=2031161
Click to expand...
Click to collapse
I tried that one also. Flashed ok but missing the upper drop down page for data and such.
wyrman said:
I tried that one also. Flashed ok but missing the upper drop down page for data and such.
Click to expand...
Click to collapse
http://csmgdl.lgmobile.com/swdata/WEBSW/LGP970/ASTLTL/V30c_00/V30C_00.kdz
Last-Modified: Thu, 10 Jan 2013 07:21:34 GMT
Content-Length: 361318800
the link works , convert in bin / fls but don't inject CWM /!\
YkZ_1967 said:
http://csmgdl.lgmobile.com/swdata/WEBSW/LGP970/ASTLTL/V30c_00/V30C_00.kdz
Last-Modified: Thu, 10 Jan 2013 07:21:34 GMT
Content-Length: 361318800
the link works , convert in bin / fls but don't inject CWM /!\
Click to expand...
Click to collapse
Link does not work for me bud.
wyrman said:
Link does not work for me bud.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=37384591&postcount=1253
Related
Official Rom from LG - v30a!!!!
This release is the same that is from 7.12.12!!!!!
---------------------------------------------------------------------------------------
links for download:
official link from lg (kdz version)
http://csmg.lgmobile.com/swdata/WEBSW/LGP990/ANEUDW/V30a_00/V30A_00.kdz
Smartflash version of the Rom
http://file.qip.ru/get/EpX_YlZ5/BIN_LGP990AT-00-V30a-EUR-XXX-N.html
mirrors:
http://www.multiupload.nl/Z4413CU6XN (thanks to sander-m)
http://www.putlocker.com/file/28C0DF5FDD929E34 (thanks to tiagorl)
Ril http://www.multiupload.nl/2764GZ1F8Q
BB http://www.multiupload.nl/0C893V659X (thanks to cojo11)
---------------------------------------------------------------------------------------
You are going to download zipped file. This The download contains the following files: (thanks to petr.klos)
LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0_AP.bin
LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0_CP.fls
---------------------------------------------------------------------------------------
For flash use Smartflash
Smartflash tutorial by PAUL (thanks to petr.klos)
I would just add, that this thread is focused on flashing sole baseband. To flash firmware (ROM) you have to add one single step.
Where is
"--Click the browse button next to 'CP Bin:' and select the baseband (FLS) file--"
you add
"--Click the browse button next to 'AP Bin:' and select the firmware (BIN) file--"
For those who get errors while flashing, this is what always fixes issues for me: (thanks to Custom40)
1) Reboot PC and just start over.
Or:
2) If you face an error in the middle of the installation, then re-plug the phone, start over but this time put the AP file in the CP bin box and the CP file in AP box.
---------------------------------------------------------------------------------------
-=How to get root=-
=1= (thanks gabrielecif)
To get root easy (no data wipe and original bootloader) go to these thread:
http://forum.xda-developers.com/showthread.php?p=35138820#post35138820
=2= (thanks to RobYyY)
UNLOCKED BOOTLOADER+CWM6+ROOT
o2x-nvflash-bootloader_unlock_v30a+CWM6.zip
♦unzip attached archive
♦put your phone into nvflash mode(don't know how? use search button)
♦open "flash-boot.bat"
♦put again your phone into nvflash mode
♦open "cwm.bat"
♦boot into cwm and flash SuperSU Root.zip
♦reboot and enjoy
EDIT1: Root doesn't work with su303.zip i don't know why.. but i have made a zip with supersu and root is working. have fun(supersuroot.zip is attached)
=3= (thanks to joiN85)
-After you install with smartflash v30a rom, download and flash "Bootloader unlock ICS Official" and "Recovery 5.0.2.8e v30a Official"
-Flash with NVFlash: Recovery 5.0.2.8e v30a Official + Bootloader unlock ICS Official
-Go in cwm and install "Superuser-3.1.3-arm-signed-tradotto.zip"
-Reboot
-Now you have Root
IMPORTANT!!!
Some users have charging problems (while connect your phone to charge with screen on - it breaks)
It is becouse of root in some case, without root everything is ok. Need more fredbacks for this!
Credits to Daniel Aminov, he received the link (smartflash version from 4.12.12).
wow. hope this is real.. can't wait to test
Yeah, i hope so too) Now i must go and I'll return in the evening, and downloading the firmware will be finished i think. Then I'll be able to say exactly.
It looks like that it comes from anonymous.
Gesendet von meinem Optimus 2X mit Tapatalk 2
URL from Leaker doesn't say error 404 anymore for me, but still can't download KDZ file :fingers-crossed:
sander-m said:
OK, new mirror for those who want stable/fast download (mirror by google);
http://goo.gl/RDqeW
Click to expand...
Click to collapse
File contains:
Code:
LGP990AT-00-v30a-EUR-XXX-NOV-30-2012+0_AP.bin 01.12.2012 00:02:38
LGP990AT-00-v30a-EUR-XXX-NOV-30-2012+0_CP.fls 30.11.2012 22:14:06
Could anyone who downloaded it, put it onto some other fileshare? (Kindly please)
Was at it myself but only downloaded 45 MBs then it crashed.
By my WinRAR, it contains
LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0_AP.bin
uncompressed filesize 1 018 167 296 B
and probably CP, which I cannot confirm, since my download failed and I can't w8 for another 12 minutes to redownload it. Worksh[ee]t.
downloading now. hope its real and genuine...for me, the leaker still says not found
donwloading
Downloading...
downloading 20 min left
The download contains the following files:
LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0_AP.bin
LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0_CP.fls
I will see if I can upload to a mirror.
Who got the baseband for this 30a?
Finally waiting to get back home n try this........
Shadowchaz said:
The download contains the following files:
LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0_AP.bin
LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0_CP.fls
I will see if I can upload to a mirror.
Click to expand...
Click to collapse
Can u confirm whether its genuine and can u gives all some more details after installing. I probably wud've done it if i had downloaded it... And thanks a million for mirroring it...waiting for the link...
orbital_71 said:
Who got the baseband for this 30a?
Click to expand...
Click to collapse
Correct me if I am wrong but Isn't the baseband just the fls file in the zip?
naazgulla said:
Can u confirm whether its genuine and can u gives all some more details after installing. I probably wud've done it if i had downloaded it... And thanks a million for mirroring it...waiting for the link...
Click to expand...
Click to collapse
Trying to upload to my dropbox, but the upload keeps failing
rxformula91 said:
Correct me if I am wrong but Isn't the baseband just the fls file in the zip?
Click to expand...
Click to collapse
We cannot correct you, since you in fact are correct.
rxformula91 said:
Correct me if I am wrong but Isn't the baseband just the fls file in the zip?
Click to expand...
Click to collapse
I just want BB
Thanks for sharing this,
I've completed the download, currently smartflashing it to my O2X.
I'm also uploading it right now to other filehosting services.
I will report back soon. Maybe this is the real deal.
Edit:
Mirror:
http://www.multiupload.nl/Z4413CU6XN
Smartflash error occured . Maybe it's just a fake or whatever. Device is still at v28G.
Flashing.....
Hi,
today I flashed this ROM : http://forum.xda-developers.com/showthread.php?t=2178346 from rarog. Working fine, but after flashing, no CSC is shown with *#1234*.
Something I have to think about ?
regards
Michael
Flash back stock recovery and flash firmware again.
Then you can go back to cwm again.
I've noticed that cwm can't seem to handle the csc.zip update upon reboot correctly. This worked for me.:good:
Edit : You can also try to flash same firmware as CSC in Odin.
if you have cwm-recovery try this .zip sec_csc_XXAMBA3-for-cwm.zip - 33.43 MB :good:
mkruseonline said:
Hi,
today I flashed this ROM : http://forum.xda-developers.com/showthread.php?t=2178346 from rarog. Working fine, but after flashing, no CSC is shown with *#1234*.
Something I have to think about ?
regards
Michael
Click to expand...
Click to collapse
Have you flashed with Odin? I had this problem with CSC once with a previous firmware. Affter reflashing, all the CSC were back.
enox.co said:
if you have cwm-recovery try this .zip sec_csc_XXAMBA3-for-cwm.zip - 33.43 MB :good:
Click to expand...
Click to collapse
Yes, I have cwm-recovery.
I will try this. Something I have to look at ?
And yes, I flashed with ODIN (2 Times) - same result.
tys0n said:
Flash back stock recovery and flash firmware again.
Then you can go back to cwm again.
I've noticed that cwm can't seem to handle the csc.zip update upon reboot correctly. This worked for me.
Click to expand...
Click to collapse
Where can I get Stock recovery ?
regards
Michael
mkruseonline said:
Yes, I have cwm-recovery.
I will try this. Something I have to look at ?
And yes, I flashed with ODIN (2 Times) - same result.
Where can I get Stock recovery ?
regards
Michael
Click to expand...
Click to collapse
just flash the .zip with cwm and reboot ....
enox.co said:
if you have cwm-recovery try this .zip sec_csc_XXAMBA3-for-cwm.zip - 33.43 MB :good:
Click to expand...
Click to collapse
Hi,
CSC is back.
Thank you :good:
regards
Michael
I8190ojvamc1
plz could u make a file for I8190OJVAMC1
...if someone can upload that sec_CSC.zip
Sent from my Nexus 4 using xda premium
how to upload it
so how we can get the file sec_csc.zip for I8190OJVAMC1
dr_kamhawy said:
so how we can get the file sec_csc.zip for I8190OJVAMC1
Click to expand...
Click to collapse
You'll need linux or cygwin I think.
Download fw and extract the cache.img from it if i'm not mistaken.
you need to unpack your firmware ( .tar.md5 ) with 7.zip ... inside your firmware is a cache.img ....take the cache.img and upload it and post the link here ..... i will convert it and make a sec_csc_cwm_flashable.zip ....
Guys in the nooby guide in the ICS root section, it says in the instructions flash the .bin file.
Does that mean I only flash the .bin file and not the .fls file?? Last time I done this it put 2.3.4 in my phone!
thanks in advance
nikos550 said:
Guys in the nooby guide in the ICS root section, it says in the instructions flash the .bin file.
Does that mean I only flash the .bin file and not the .fls file?? Last time I done this it put 2.3.4 in my phone!
thanks in advance
Click to expand...
Click to collapse
If you want an ICS ROM, or JB, or higher, you only need to flash the .bin file. If you want a v20/GB ROM, you should flash the v20 baseband as well
Sent from my LG-P970 using xda app-developers app
error in smartflash
N00BY0815 said:
If you want an ICS ROM, or JB, or higher, you only need to flash the .bin file. If you want a v20/GB ROM, you should flash the v20 baseband as well
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Ok Thanks. I've tried pretty much everything, even putting the phone onto the official LG upgrader, the upgrader loses communication while its doing the upgrade, and smartflash comes up with errors and stops. Pretty much stagnant now dont know what to do.
any ideas??
P.S. my phone is dead from yesterday as i tried to stick a new rom in. not working at all!
nikos550 said:
Guys in the nooby guide in the ICS root section, it says in the instructions flash the .bin file.
Does that mean I only flash the .bin file and not the .fls file?? Last time I done this it put 2.3.4 in my phone!
thanks in advance
Click to expand...
Click to collapse
Try to flash Bin & Cp files from Preinstallation for IZS ROM (SmartFlash) HERE : http://huexxxtuff.blogspot.com.es/2013/01/izs-rom-links.html
Make shure to reinstall drivers before.
Then after this flash let it complete boot and then try to flash what you wanted.
Some times PCs are assholes.....and not just the phones....
As for rooting ics, just use http://www.unlockroot.com/ - (with usb debugging on)
Hope it helps, cheers!
I tried to install TWRP Touch Recovery. After uploading by Odin "GT-I9070_GB_TWRP_KERNEL.tar.md5" file my phone stuck on the Welcome screen samsung. What did I do wrong?... And what i shall do now?
pawelvod said:
I tried to install TWRP Touch Recovery. After uploading by Odin "GT-I9070_GB_TWRP_KERNEL.tar.md5" file my phone stuck on the Welcome screen samsung. What did I do wrong?... And what i shall do now?
Click to expand...
Click to collapse
Just download the factory image .md5 on sammobile.com and flash it via odin
Sent from my GT-I9070 using XDA Free mobile app
pawelvod said:
I tried to install TWRP Touch Recovery. After uploading by Odin "GT-I9070_GB_TWRP_KERNEL.tar.md5" file my phone stuck on the Welcome screen samsung. What did I do wrong?... And what i shall do now?
Click to expand...
Click to collapse
You installed GB kernel over JB system, that is not gonna work. Do what Patlcs told you. You can install just kernel, remove md5 from stock firmware, open it with WinRAR or 7-zip and remove all except kernel files (two of them). And flash them via Odin.
shut_down said:
You installed GB kernel over JB system, that is not gonna work. Do what Patlcs told you. You can install just kernel, remove md5 from stock firmware, open it with WinRAR or 7-zip and remove all except kernel files (two of them). And flash them via Odin.
Click to expand...
Click to collapse
If you modify .tar.md5 file, the md5sum will be mismatched giving invalid file while trying to flash...
Inviato dal mio GT-I9505
AntaresOne said:
If you modify .tar.md5 file, the md5sum will be mismatched giving invalid file while trying to flash...
Inviato dal mio GT-I9505
Click to expand...
Click to collapse
I used to do that, I was just removing other stuff. And it was working just fine. BTW, I leave file without *.md5.
solution
pawelvod said:
I tried to install TWRP Touch Recovery. After uploading by Odin "GT-I9070_GB_TWRP_KERNEL.tar.md5" file my phone stuck on the Welcome screen samsung. What did I do wrong?... And what i shall do now?
Click to expand...
Click to collapse
even i am also looking for same
did u find any solution ?? if found please help me also to downgrade my phone also
silllentkiller said:
even i am also looking for same
did u find any solution ?? if found please help me also to downgrade my phone also
Click to expand...
Click to collapse
1. What problem?
2. He flashed GB kernel over JB - that is his problem.
3. How to downgrade - http://forum.xda-developers.com/showthread.php?t=2195673
4. Solution to have TWRP on JB is to install CoCore kernel with TWRP recovery, just go to developer section of our phone and look for CoCore thread.
Hi My Friends
I need a quick help cuz i tried to install firmware using Odin .... My friend firmware mobile is down suddenly then my friend tried to restore the firm but useless then he tried to go to someone before me cuz he wasn't in the town but also he failed after i get his mobile & i tried to enter download mode & i found what i added in attachments & i also i tried to go into recovery mode but i failed cuz i think no recovery installed & also i figured that last person who tried to flash firmware he put the wrong one that related into GT-S5690 not GT-N7000 i want help to recover the mobile even with the data or not but i hope with data cuz i'm stuck now .... Does the mobile fully dead or only condition is when it's actually dead & no power up ?
matrixlover said:
Hi My Friends
I need a quick help cuz i tried to install firmware using Odin .... My friend firmware mobile is down suddenly then my friend tried to restore the firm but useless then he tried to go to someone before me cuz he wasn't in the town but also he failed after i get his mobile & i tried to enter download mode & i found what i added in attachments & i also i tried to go into recovery mode but i failed cuz i think no recovery installed & also i figured that last person who tried to flash firmware he put the wrong one that related into GT-S5690 not GT-N7000 i want help to recover the mobile even with the data or not but i hope with data cuz i'm stuck now .... Does the mobile fully dead or only condition is when it's actually dead & no power up ?
Click to expand...
Click to collapse
if you can get download mod then there si no problem, just download a official stock firmware and a correct pit file (found in this forum) and use odin 3.09
and flash your device hope this can help you.
albatron34 said:
if you can get download mod then there si no problem, just download a official stock firmware and a correct pit file (found in this forum) and use odin 3.09
and flash your device hope this can help you.
Click to expand...
Click to collapse
I already downloaded official stock & i think i used a pit file & wrote successful may be not affect even it's a correct one .... can u get me this file & I'll try again hope u help my guys to get the mobile alive
matrixlover said:
I already downloaded official stock & i think i used a pit file & wrote successful may be not affect even it's a correct one .... can u get me this file & I'll try again hope u help my guys to get the mobile alive
Click to expand...
Click to collapse
google for this one : Q1-20110914_16GB.pit and use Odin3_v1.85
albatron34 said:
google for this one : Q1-20110914_16GB.pit and use Odin3_v1.85
Click to expand...
Click to collapse
should be Odin3_v1.85 or may bey higher v3.09 ?
matrixlover said:
should be Odin3_v1.85 or may bey higher v3.09 ?
Click to expand...
Click to collapse
for me i bricked my phone after wrong flash; i used odin 1.85 and pit file 16GB and officiel stock jbrom and my phone now is ok.
good step by step guide :
http://www.androidayos.com/2012/09/...galaxy-note-n7000-unbrick-and-recovery-guide/
I'm tried using odin 1.85 but it stuck when i tried to use pit file & now i tried to ener download mode it shows me use volume up but when i click the screen goes black may be the battery even i charged it externally i'll try to get another battery but now i stuck what shall i do ?
why no replay anyone help me
matrixlover said:
why no replay anyone help me
Click to expand...
Click to collapse
because of that: "he put the wrong one that related into GT-S5690 not GT-N7000"
Nothing to see here....move along
Sent from my GT-I9205 using Tapatalk
ThaiDai said:
because of that: "he put the wrong one that related into GT-S5690 not GT-N7000"
Click to expand...
Click to collapse
So there any idea to put the right one using anything or what ?!
matrixlover said:
So there any idea to put the right one using anything or what ?!
Click to expand...
Click to collapse
See if PhilZ tar (not the philztouch file) will flash with Odin and post back.
Sent from my GT-I9205 using Tapatalk
ThaiDai said:
because of that: "he put the wrong one that related into GT-S5690 not GT-N7000"
Click to expand...
Click to collapse
AndroidSlave said:
Nothing to see here....move along
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
AndroidSlave said:
See if PhilZ tar (not the philztouch file) will flash with Odin and post back.
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
I'm sorry if i get u tar is flashed & repartitioned but u mean with Philz the tar file ? & philztouch file what do u mean exactly ?