Related
hi i am using GT-i9000m from bell. i just flashed back to JH2 from the JPK and my screen wont load anything after the boot animation. the two buttons of the bottom light up but nothing else happens i used odin3 1.3 and it said passed everything went normally. i tried doing this twice. it can boot into recovery and load the boot animation. also it can go into download mode. thanks for the help in advance
Sounds like another dead internal sd card issue to me. You cannot fix this on your own. It needs to be sent for repair or exchange if you still qualify.
Sorry for the bad news...
Or u try that:
http://forum.xda-developers.com/showthread.php?t=819551
And flash a diferent rom. Might be worth a try
Sent from my GT-I9000 using Tapatalk
i can get into the download mode. i tried flashing a new rom a SFR 3g+ from france(JM9) and they put a new boot logo before the samsung one, and it played it so it is being flashed just not loading after the boot logo.
edit: after trying to boot JPK the phone boots in recovery mode and this is the error i get,
"multiscs : can not acces to /system/csc/bmc/system/"
"copy_common_data"
EDIT: after try to format internal sd-card
"update media, please wait"
"E:cant mount /dev/block/mmcblk0p1
"I/O error"
"E:copy_dbdata_media:can't mount SDCARD:"
"your storage not prepared yet. please use UI menu for format and reboot actions.
wops double post delete please thanks
So do what it tells u to... Go on factory reset. And u can ignore that multi csc error. It is anoying seeing that everytime u go into recovery, but its just the region code and it doesnt affect anything. It will be gone if u reflash but first try everything else to get ur phone to work
And the samsung logo at boot is replaced cause u flashed a branded software.
Sent from my GT-I9000 using Tapatalk
ok i sent my phone for repairs at the bell store, will keep everyone posted on the process. cost me 35 bucks but it should be refundable
its been 2 weeks since i sent my phone in for repairs and this is what the website says: Parts required to repair phone are backordered. Delivery of parts expected on 20101202. i am assuming that is the internal SD card.
I have the exact same issue with my phone. Did you reflash it to stock JH2 before bringing it to bell ? Are you a Bell mobility customer ?
That's my issue... I am not with bell and was using the phone on ROgers so I have no idea where to go for support.
Any help would be immensely appreciated.
hey man i am a FIDO customer if you go to the bell store in a mall or something, they will fix it for you. you have a 1 year manufacturer's warenty. when they ask you did you unlock it say no and yes if i were you make sure you flash to JH2 before becauase when you boot the phone it should say "Samsung galaxy s i9000M". i did that. i didnt want to risk them saying f*ck off you rooted it or flashed it or something.
Galody said:
hey man i am a FIDO customer if you go to the bell store in a mall or something, they will fix it for you. you have a 1 year manufacturer's warenty. when they ask you did you unlock it say no and yes if i were you make sure you flash to JH2 before becauase when you boot the phone it should say "Samsung galaxy s i9000M". i did that. i didnt want to risk them saying f*ck off you rooted it or flashed it or something.
Click to expand...
Click to collapse
Thanks for the tip but since they'll know I'm not a bell customer, how can I justify not having it unlocked ? What would I have used it for then ?
Do you have a link for the JH2 rom, I can't seem to find it anywhere..
Thanks
edit: managed to find JH2 kernel and flashed. Really weird, I'm able to boot with my external SD card in if not, it gets stuck at the boot screen. Regardless, the internal SD is dead either way.
this is probably the most delicate part be sure to remember the bell clerk that sold it to you. make sure you go to him/her. sense of familiarity is always nice. be nice and kiss ass. i just said i couldnt figure out how to unlock it play dumb. people and technology usually dont mix. i jave just been using it as a $700 mp3 player and dont really need phone cause i have wifi at home and work. play nice and play dumb they should not give you too much trouble.
PS: they cant really prove that u unlocked the phone since it wont boot and most of em are not that tek savvy nor have the time. they will ask you for $35 and you will probably not get that back its better than living with a $700 paper weight. never buying a samsung product again ... POS phone. should have gotten the HTC desire from telus.
Ok here goes... This is my first thread post here but I am in serious need of help.
I have searched and searched the forums for a hopeful answer but I have found it difficult to find the answer I seek.
So here is the story:
Bought a GT second hand from Akihabara in Japan which was locked to NTT DoCoMo. I was using it as a WIFI only Tab and all was wonderful till my IT brain decided it could be better and I began to tinker.
I had been looking around for a way to make my Australian Virgin Mobile SIM to work on the tab and found a lot of good answers but nothing that would make it work.
I then had the brilliant idea to change the firmware with a European firmware so I could get all the features enabled from a fresh start. Which is where it all went wrong.
I first tried to flash the tab using Odin 1.7 with the P1000XXJK5 euro firmware from samfirmware.com
This failed and left my tab with the picture of a phone and a pc with a dotted line and in between them an exclamation point in a triangle.
After a lot of fiddling (I dont remember what I did but I managed to get rid of that screen had something to do with retrying the flash and it was very late last night at this point) I managed to try again but Odin just kept failing on running the updated firmware.
I then decided that it would be a good idea to run the Rotohammer firmware by following the instructions on this thread:
http://forum.xda-developers.com/showthread.php?t=895827&highlight=sc-01c
This is where I once again received errors from Odin and now my tab is somewhat bricked.
I tried reflashing but same errors every time. (I currently dont have the errors from Odin but I will update my post when I get home)
I can still get to the downloading screen (Yellow triangle with the Android digging) so I am hopeful all is not lost.
So now you have heard my sob story I will ask two questions....
1. Has anyone actually successfully flashed a Japanese model Tab?
2. My only thought/hope at the moment can anyone direct me to an original NTT DoCoMo firmware so I can at least go back to having WIFI only Tab?
Thanks in advance if you can help
Alex
Yes , i suggest you to wait until you get a right firmware for it !
That would probably work if the partitions are a match !
What is this model called btw ?
"NTT DoCoMo Japanese Tab" or there is any model ? such as M180 for korean , P1000 , P100 Sprint , I800 Verizon , etc..
Br
Oz
I am searching the an original NTT DoCoMo firmware.
Electroboy said:
Yes , i suggest you to wait until you get a right firmware for it !
That would probably work if the partitions are a match !
What is this model called btw ?
"NTT DoCoMo Japanese Tab" or there is any model ? such as M180 for korean , P1000 , P100 Sprint , I800 Verizon , etc..
Br
Oz
Click to expand...
Click to collapse
Oz the model is SC-01C it has a build date of 2010/12
I was thinking considering I can get into the build/download screen maybe trying an emergency firmware recovery using Kies.
Hi,
I'm a fellow SC01 owner. You can get a backup of the stock firmware here: http://www.megaupload.com/?d=OJAK2UZF
Firmware code is SC01COMJK2
I believe there are newer firmwares (which I haven't installed as some of them contain a new bootloader that only allows for signed firmwares, same as the international units) that I have seen mentioned on various Japanese blogs. Let me know if you want me to try to hunt any down for you.
As for my SC01, I installed the custom kernel by koxudaxi and it's working great. Mind you, I've only changed to this kernel and apart from that am running the stock OS. I got his kernel here which can overclock to 1.4GHz: http://koxudaxi.sakura.ne.jp/
The kernel I installed via Heindall is zImage_ntt_2. It looks like he's built a newer version though, I might check that out. I think what you might want to do, is in download mode try to restore the above backup to your unit. Look up the Roto Backup thread to see how to do this. Hopefully since you can get download mode, all is not lost. I personally think it's quite crummy that there are different hardware versions like this which aren't interchangeable though >_<
I'm going to give the original firmware a go today at lunch time and I will let you know how I go. Thanks anyways for the link if all goes well I'll look at possibly trying the the koxudaxi kernel.
UPDATE: Well I'm not having luck getting the firmware to flash to my tab I keep getting "Failed to retrieve config Descriptor" when trying to flash. I will keep plugging away.
UPDATE: Still getting the same problems using heimdall to flash the tab. Any suggestions as to what I could do next?
Recovering a Docomo Tab
I'm currently running Overcome v1.1.3 ROM and richardtrip's V15 kernel on my SC-01C.
acont said:
UPDATE: Well I'm not having luck getting the firmware to flash to my tab I keep getting "Failed to retrieve config Descriptor" when trying to flash. I will keep plugging away.
Click to expand...
Click to collapse
You're getting this error from Heimdall, right? Have you tried Odin 1.7?
Here's how I recovered my Tab using Odin:
1. Following the instructions in http://forum.xda-developers.com/showthread.php?t=895827, specify the P1_add_hidden.pit in the PIT button and select Re-Partition.
2. Specify the stock Docomo ROM when pressing the PDA button.
3. Ignore the Phone and CSC buttons, as the stock ROM already contain these items.
You should be able to restore your Tab to stock settings using this procedure.
If this doesn't work, you might want to check if the USB connection to your PC is ok, and if everything necessary to run Odin is installed on your PC.
Bugger!
Well thanks for your help all of you but I think I have just made matters worse.
Last night I had success in flashing the original docomo firmware provided to me by zetsurin but I think I shouldn't have included the boot images.
Unfortunately I think it is completely bricked now it now wont turn on and when plugged into power (thinking that the battery had died) it just comes up with a white screen.
I can't boot into download mode and I can hold down the power button till I turn blue in the face... So as Bones would say "It's dead Jim"
Unless any of you have anything else I could try as a last ditch shot I might just have to ship it back to Japan and get them to fix it or maybe try Samsung here in Oz.
Serves me right
Thanks again.
acont said:
Last night I had success in flashing the original docomo firmware provided to me by zetsurin but I think I shouldn't have included the boot images.
Click to expand...
Click to collapse
What exactly happened?
The SC01COMJK2 firmware does not contain protected bootloaders, by the way.
acont said:
Unfortunately I think it is completely bricked now it now wont turn on and when plugged into power (thinking that the battery had died) it just comes up with a white screen.
Click to expand...
Click to collapse
I've heard about this happening when the battery runs out. Try connecting the Tab to your PC (not your AC adapter) and let it trickle-charge for an hour or so. If successful, you should see the download screen.
fury1sog unfortunately that didnt work
spoke to the samsung repairers here in Aus and they said they can take a look at it for me hopefully bring life back into my unit and then I will never touch it again
Any thoughts?
Hopefully this post is still being looked at but has anyone got any ideas as to what I could do before I fork out $374 to my tab repaired by Samsung Australia?
According to the repair guys its a faulty board (not an idiot that tried to flash it) and needs to be replaced. Not sure if this is worth my trouble considering I could buy a brand new tab for $599.
There is a positive out of this, the MB will be an Australian MB and I will have a working "Australian" tab instead of the Japanese version.
Considering the unfortunate tragedy in Japan I am not sure I should try and get my friend in Japan to fix it for me.
Thoughts anyone?
I know someone who can unlock it, I have mine unlocked by them.
I was afraid of flashing it myself so I paid to have it unlocked, cost was $20.
I think you better go for the MB replacement, it's cheaper.
For what it's worth, I went to reset my tab to factory using a rotohammer backup I made when I first bought it, and got stuck in a boot loop. So I then used ODIN. Still got a boot loop. Then I tried ODIN repartition... it hung for hours. Knowing the thing was likely bricked I pulled the plug and now I am in the situation as you: I have a crappy icon of a phone + an exclamation + computer image. Dead.
I think the best thing I can do for this junk is to toss it unceremoniously in the bin. Fortunately I also have an iPad which has resumed full-time service.
EDIT: Some signs of hope in here: http://forum.xda-developers.com/showthread.php?t=903257
Try "heimdall close-pc-screen" to see if your tab can get kicked back into the boot loop at least. Mine has failed a repartition, but I can still get it into the boot loop, which is a start. Will experiment over the weekend.
EDIT 2: Well my tab is back up and runing. I reflashed my original roto backup using ODIN with repartition on, then I went into recovery and did a factory restore. Back up like stock now. I think I'm going to sell it though, since it's been badly dis-owned by Samsung.
zetsurin said:
Hi,
I'm a fellow SC01 owner. You can get a backup of the stock firmware here: http://www.megaupload.com/?d=OJAK2UZF
Firmware code is SC01COMJK2
I believe there are newer firmwares (which I haven't installed as some of them contain a new bootloader that only allows for signed firmwares, same as the international units) that I have seen mentioned on various Japanese blogs. Let me know if you want me to try to hunt any down for you.
As for my SC01, I installed the custom kernel by koxudaxi and it's working great. Mind you, I've only changed to this kernel and apart from that am running the stock OS. I got his kernel here which can overclock to 1.4GHz: http://koxudaxi.sakura.ne.jp/
The kernel I installed via Heindall is zImage_ntt_2. It looks like he's built a newer version though, I might check that out. I think what you might want to do, is in download mode try to restore the above backup to your unit. Look up the Roto Backup thread to see how to do this. Hopefully since you can get download mode, all is not lost. I personally think it's quite crummy that there are different hardware versions like this which aren't interchangeable though >_<
Click to expand...
Click to collapse
hi zetsurin!
thanks for teaching me how to unlock the tab.
problem now is, im not able to successfully flash any rom. keeps saying write fail, using odin.
stuck at docomo logo when rebooted.
need help.
also used heimdall. starts downloading. but stuck almost at the end of the tab's progress bar.
argh...
me too ! samsung galaxy tab m180 Korean .... huhu
What ROM is best for a SC-01C?
Hi Guys
I picked up a 2nd hand SC-01C from Yahoo Auction, and am wondering what the best ROM to use with it is...
Looks like this guy has got an Overcome ROM on it OK, (http://chaki-ramone.blogspot.com/2011/06/galaxytabsc-01cgingerbreadromovercome.html), so I wonder if the latest version (http://forum.xda-developers.com/showthread.php?t=1205990) will work OK - anyone tried? (is the SC-01C a GSM-based model??)
I'm not going to use a SIM with it, so I'm not bothered about unlocking - but just want it rooted & want a good balance between speed & battery life. If you were going from scratch with an SC-01C, what would you do? Any suggestions greatfully received!
Thanks in advance?
PS - I'm an iPhone / iPad / Ideos 8150 / Notion Ink Adam owner, all jailbroken / rooted. So I'm not scared about rooting per-se, just worried about trying something that will not work because of anything docomo has done to the Tab!
Acont you could be coma bricked try pluginging it into THE MAINS for at least 4 hours if nothing come up your hard bricked.
Sent from my GT-P1000 using XDA Premium App
zetsurin said:
For what it's worth, I went to reset my tab to factory using a rotohammer backup I made when I first bought it, and got stuck in a boot loop. So I then used ODIN. Still got a boot loop. Then I tried ODIN repartition... it hung for hours. Knowing the thing was likely bricked I pulled the plug and now I am in the situation as you: I have a crappy icon of a phone + an exclamation + computer image. Dead.
I think the best thing I can do for this junk is to toss it unceremoniously in the bin. Fortunately I also have an iPad which has resumed full-time service.
EDIT: Some signs of hope in here: http://forum.xda-developers.com/showthread.php?t=903257
Try "heimdall close-pc-screen" to see if your tab can get kicked back into the boot loop at least. Mine has failed a repartition, but I can still get it into the boot loop, which is a start. Will experiment over the weekend.
EDIT 2: Well my tab is back up and runing. I reflashed my original roto backup using ODIN with repartition on, then I went into recovery and did a factory restore. Back up like stock now. I think I'm going to sell it though, since it's been badly dis-owned by Samsung.
Click to expand...
Click to collapse
Can anyone pls help,, my galaxy tab 7inch gt-p1000r is stuck on phone+pc logo, can't go to download mode, can't go to recovery mode,, can't do anything,, pls someone help me,, I am desperate..
huylang280285 said:
me too ! samsung galaxy tab m180 Korean .... huhu
Click to expand...
Click to collapse
unbricking M180 is done long time ago
Here is a video for you
http://www.ort-jtag.com/blog/?e=15
udhtari said:
Can anyone pls help,, my galaxy tab 7inch gt-p1000r is stuck on phone+pc logo, can't go to download mode, can't go to recovery mode,, can't do anything,, pls someone help me,, I am desperate..
Click to expand...
Click to collapse
What about this P1000R , what is special or different ?
I know P1000L was for south american edition !
lemmy_0 said:
hi zetsurin!
thanks for teaching me how to unlock the tab.
problem now is, im not able to successfully flash any rom. keeps saying write fail, using odin.
stuck at docomo logo when rebooted.
need help.
Click to expand...
Click to collapse
Docomo solution is very soon !
That TAB need JTAGging thats the only way ..
I have the good and dead device in hand , we will release for ORT-JTAG probably this week ..
Best Regards
Oz.
Hello everyone!
Sorry to bother you... but i am in desperated need of help. A friend of mine got it's Galaxy Tab from Korea a week ago, and i promised to help by setting it in english. Unfortunatelly, after flashing with Odin any other firmware, the Galaxy Tab doesn't work at all. To be more exact, the device starts, but i can't see anything on the screen. I can even hear the Galaxy starting sound... but anything else it's a no go.
I've searched EVERYWHERE on the web for the right korean version (As the model number is SHW-M180S) but i'm out of luck. Please help me find that firmware, or i'll have to pay for a broken Galaxy Tab.
Thank you in advance!
P.S. Here are the infos i've noted before it got bricked:
Model number: SHW-M180S
Firmware Version: 2.2
Baseband version: M180S.DL24.0810.ST
Kernel version: 2.6.32.9 [email protected] #1
Build number: FROYO.DL24
Back serial: SEC-SHWM180S(B)
I had to send mine into the Samsung Repair Centre in Ashley Great Britain....am waiting for them to fix and send back. Good luck...
Find the thread in the development forum about at&t black screen with thin white line during boot. You need to flash the JJ4 bootloader, using odin.
AS Your tab is now, if you power off, then power on, you hear the sounds, so you are not bricked. Let the tab start, and sit for a couple of minutes. Then push the power button to wake it up like usual - it will wake up!
1Brite1 said:
I had to send mine into the Samsung Repair Centre in Ashley Great Britain....am waiting for them to fix and send back. Good luck...
Click to expand...
Click to collapse
Thank you for your advice, but Samsung repair in my country told me to send it back to Korea... That's so faaar away... I am still wondering why they couldn't just provide me the corect bios
rangercaptain said:
Find the thread in the development forum about at&t black screen with thin white line during boot. You need to flash the JJ4 bootloader, using odin.
Click to expand...
Click to collapse
But... i don't have a thin white line during boot. Shall i still try to flash the JJ4 bootloader?
rangercaptain said:
AS Your tab is now, if you power off, then power on, you hear the sounds, so you are not bricked. Let the tab start, and sit for a couple of minutes. Then push the power button to wake it up like usual - it will wake up!
Click to expand...
Click to collapse
Unfortunatelly... even after more than 5 minutes, pressing the power button doesn't wake the screen up. Plus, i can't see it in Samsung Kies...
Some friend of mine told me it's because the Korean version has a completelly different hardware then other Galaxy Tabs (that's why it's called M180S and not P1000). It also has DVB tuner (and antenna)...
I really don't understand why i can't find the Korean firmware for M180S not even on the oficial Samsung firmware website... And they don't respond to my emails... I'm in pain in here...
Well, there is no answer from Samsung Tech Support... I just got it to a service, and they've told me they can't find the firmware for it... Every US/EU/Asian firmware they tried to flash... when the Tab starts, it's still on blank/black screen.
Now, they've told me the motherboard for this M180S is really new... it's manufactured on January 7th, 2011...
Maybe somebody could help me track where the Update from kies is leading to this Tab? It must be downloading from somewhere, right?
Anybody? Nobody has Galaxy Tab model M180S firmware? Unbelievable...
Sorry to hear about you tablet. I know that somebody must know....but...if they don't read the post/thread...they won't know to answer unless they have a problem and go looking for an answer.
As for my problem, I am still waiting for it to get to the Samsung Repair Centre in the U.K. I paid $147.00 for two tablets to go by worldwide expedited shipping. Long story short....UPS says it is customs/Samsung says they are waiting on paperwork from UPS...etc....I am going to try to call tomorrow and see what is going on. If, it does get fixed....BIG HOPE..here....I will let you know as one of my phones/tablets came from Hong Kong....Chinese language...Korean Apps....but it is still a gt-p1000 model.
One option.....did you try and register your tablet at the Samsung.com/uk site? If you do, then you can select your model from the pull-down....if it isn't listed...put full details into the email and see what type of response that you get. I know that depending on what options you choose....you will have it sent to a different service centre which may be able to fix it for you.
1Brite1: i've tried to register my tablet on Samsung.com and .co.uk, but in the Registration Page when i enter Model numbere: SHW-M180S it says "No Data" or something like that. They also haven't answered to my emails...
check your inbox
hussam86 said:
check your inbox
Click to expand...
Click to collapse
Check your inbox too
hussam86 said:
check your inbox
Click to expand...
Click to collapse
Well, thanks to hussam86 i found some Nakyup-M180S-Froyo-DK20-rooting.tar on the web... but before trying to updated (after beeing JTAG-ed so that Odin can see the phone - although the Galaxy Tab doesn't display anything), i want to make sure i am flashing the right files.
So, inside the .tar i have the following files:
factoryfs.rfs - 382MB
modem.bin - 16MB
zImage - 4.7MB
What's the right way to flash them with Odin? What .pit file should i use?
I am thinking factoryfs.rfs is the PDA, modem.bin is the PHONE, but what should i do with zImage?
Thanks in advance!
Hmm, i think i figured out i don't have to extract the .tar... Just put it in PDA with Odin and flashing it directly, not the inside files.
Unfortunatelly, it starts... flashes modem.bin, then zImage, and then it says "FAIL!". Do i need a Pit file or select extra options in Odin ?
As nobody wants to help... i'll answer myself: YES, I need the .pit file for M180S, otherwise the flash file itself is uselss... So, anybody has the .pit file for SHW-M180S ?
Seems like finding the right .pit file for SHW-M180S is a "mission impossible". I am really dissapointed by Samsung support. I will probably never buy a Samsung tablet ever again...
Bump! Maybe somebody got more luck than i did...
similar problem...
i have a m180s as well and i recently attempted an odin firmware flash
the same thing happened
it crashed and all i can see is a black screen while the sound plays
can anyone help me out here? i just got the tab fixed last week
firmware SHW-M180s
Hi.
Please help me to find firmware and .pit file to flash my galaxy tab model SHW-M180S Korae . Thanks & best regardes
Samsung Tab M180s firmware
hussam86 said:
check your inbox
Click to expand...
Click to collapse
Hi, can you also help me find the FW Nakyup-M180S-Froyo-DK20-rooting.tar as this is the file i need. Its not available for download over the internet. My Tab has been Jtagged and now only shows AnyCall logo...Plz plz plz help me infinding this source. Thanks
The Galaxy Tab M180S is still dead after 6 months of asking all over the web... been at 3 mobile services... It's an extra point for me to NOT ever buy a Samsung product!
P.S. The price oficial Samsung service asked to repair it costed arround 20 USD less than a new tablet is!!! They must be crazy. Thanks god i have iPad2!
Do not blame Samsung for your ignorance to flash firmware that is not suitable for your GTab through odin and without proper knowledge, you void the warranty and it is your own fault not dump the system for backup before flashing...
You can try email Nakyup for the stock firmware, because you need full stock firmware Froyo DK20, not only the pit file, before flashing Nakyup-M180S-Froyo-DK20-rooting.tar...
hi i loaded froyo (i9000ugjl2) on galaxy tab, but now it doesent come on. the flashlight at the back stays on and flashes sometime. wot do i do?
We need WAY WAY more information than that to provide assistance. Lets start with:
Tab Version (Wi-fi, GSM, CDMA)
Carrier
What you did/how you got to this point. PRECISELY, and step by step.
ok i have the tab p1000 cdma. i loaded t-mobile via odin on saterday, but that was not my default rom. i googled froyo and found ( I9000M_JL2_JL2_JL2_JL2_UG_BMC ) file and it said froyo download.
after loading it with odin (pda) the tab switched off and the flash stayed on.
If I'm not mistaken, I9000M_JL2_JL2_JL2_JL2_UG_BMC is for Galaxy S, not Galaxy Tab. loading this ROM into Galaxy Tab can damage the device's board physically.
Not to mention the t-mobile ROM is GSM, and you have a CDMA device.
You bricked it, twice.
*edit* Pretty sure you wont get any 3 button combination to work, but in the off chance, try putting it into download mode... If it goes, you have a chance... If you can't get it into download mode, it's toast.
ok it looks like i can go into download mode cuz if i conect to odin and start it dosent but if i hold volume down and power it seems to work i dont think i have the right software to laod to the tab.
braam2000 said:
ok i have the tab p1000 cdma. i loaded t-mobile via odin on saterday, but that was not my default rom. i googled froyo and found ( I9000M_JL2_JL2_JL2_JL2_UG_BMC ) file and it said froyo download.
after loading it with odin (pda) the tab switched off and the flash stayed on.
Click to expand...
Click to collapse
PEBCAK!!!!
TheATHEiST said:
PEBCAK!!!!
Click to expand...
Click to collapse
... And you seriously chastise others for making useless and random comments in threads?! Wow dude, get a friggin' life. He even posted in the correct section and you ... I can't even begin to tell you how hypocritical and ignorant you must be.
braam2000 said:
ok it looks like i can go into download mode cuz if i conect to odin and start it dosent but if i hold volume down and power it seems to work i dont think i have the right software to laod to the tab.
Click to expand...
Click to collapse
You need to reflash back to stock, I'm a GSM device owner and know very little about CDMA tabs, but if you do a search in the development forums for "CDMA Stock" or something similar you should find what you are looking for.
If you can access download mode, I don't believe it's beyond repair... Just do your research on this forum before flashing anything else, and always do it before flashing a device for the first time. Search is your friend.
braam2000 said:
ok i have the tab p1000 cdma. i loaded t-mobile via odin on saterday, but that was not my default rom. i googled froyo and found ( I9000M_JL2_JL2_JL2_JL2_UG_BMC ) file and it said froyo download.
after loading it with odin (pda) the tab switched off and the flash stayed on.
Click to expand...
Click to collapse
First thing's first, don't keep on trying to do something until you are sure of it. It might drain your battery.
hi guys
ja i have given up on this tab. i downloaded (P1000ZHKC2_P1000ZHKC1_P1000ZZHKC1_HOME) and loaded it on tab. it loads then reboots but still no luck.
the flash still stays on ......... im gona c if i can do a insurance claim then get the tab 10inch. unless some1 can come up with a way on how to do a hardware reset. (formate via hardware)
Hello everyone, my father in-law just gave me the samsung galaxy tab for verizon a couple days ago, so I decided to make sure the firmware was up to date and all that. When I was updating through kies it became unresponsive and went to a screen with a mobile phone, warning ! sign, and a pc. The tablet now responds to nothing, no download mode, no hard reset, nothing. A friend told me I could possibly put the firmware on an sd card and hop it boots from that but I can't find the firmware for the tablet. Any help would be greatly appreciated. Thanks in advance.
The "mobile phone, warning ! sign, and a pc" is considered a download mode.
Use Odin to flash a stock firmware if Odin detects it in download mode.
I checked the samfirmware site for the original firmware but I can't find it. My model is the SCH-I800, they don't even have it listed there. Did they change the model number or something? Anyone have a link to the original firmware that actually works. Every link I've tried on the forums is dead. Thanks again.