Database Develop

[OTA SBF] OLYFR_U4_1.5.7 Version 1.5.7

Here you go everyone!
Thanks to an awesome anonymous source, we now have the over-the-air update 1.5.7 in the form of an SBF file for flashing in RSD Lite!
OLYFR_U4_1.5.7_SIGNED_OLPSATTSPE_P012_HWolympus_1g_1FF.sbf
Download Links & Guide:
OLYFR_U4_1.5.7 Download

Get to crackin suckachump!
Sent from my Hot**** Atrix.

I wish it was this easy to get a Bell SBF

Nice! Thank you and the anonymous source

FYI This update was recalled by Motorola

https://supportforums.motorola.com/thread/47993?tstart=0

thank you ....nice shot here

edit:
Unfortunately for rooted users, Motorola’s 1.5.7 update has patched the “psneuter” hole that previously allowed for Superuser root access. Overall, looks like a fairly minor update from Motorola for Atrix users. No word yet on a Bell version of the update, but I’m sure an OTA for the Bell Atrix can’t be too far behind.
Click to expand...
Click to collapse
site answered my question.. amazing what you can find from READING

anyone knows why it got recalled?

It wasn't recalled.. just updated 1minute ago

This phone and its issues are getting to be a little much...

flashed the SBF, halfway through i forgot since it cannot be rooted right now i can't restore all the apps using titanium. lol....what a pain manually doing it. So far so good, nothing really to report i guess. The only complaint i had before was when entering the car dock, if i wanted to open an app i would have to swipe the fingerprint reader in order to run anything. I hope this is fixed in the "misc car dock fixes" part. I'll find out later when i get in my truck.
EDIT: Also, teh touchscreen seems WAY too sensitive now. I keep inadvertently tapping things accidentally.

i tried flashing straight from gingerblur 7.2 and it failed. the process seemed to be working but at the end it failed. do i need to flash back to stock sbf first, then to this one?

Can't flash 1.5.7... currently with an aRooted 1.2.6...
Half way through the OTA update, it shows the Android logo with an exclamation mark...
Any ideas?

joesixpack1969 said:
Half way through the OTA update, it shows the Android logo with an exclamation mark...
Any ideas?
Click to expand...
Click to collapse
On the OTA or on the SBF in this thread?

joesixpack1969 said:
Half way through the OTA update, it shows the Android logo with an exclamation mark...
Any ideas?
Click to expand...
Click to collapse
Same thing
I got OTA

kennethpenn said:
On the OTA or on the SBF in this thread?
Click to expand...
Click to collapse
OTA... Does it not work on a 1.2.6 rooted?

bigdog_nick said:
Same thing
I got OTA
Click to expand...
Click to collapse
This thread is NOT about the over-the-air update. This thread is about the SBF file attached that corresponds to the version given after over-the-air updating.
Please do not direct questions or comments regarding the OTA installation in here.

joesixpack1969 said:
OTA... Does it not work on a 1.2.6 rooted?
Click to expand...
Click to collapse
Never accept an OTA on a rooted device. Follow the instructions in this post and flash the SBF.
ALSO:
This thread is NOT about the over-the-air update. This thread is about the SBF file attached that corresponds to the version given after over-the-air updating.
Please do not direct questions or comments regarding the OTA installation in here.
Click to expand...
Click to collapse

ah~!! I m gonna try now!!!!!

Firmware ATRIX HD MB886 AT&T ICS 4.0.4 "New Update 09/13"

"FIRMWARE TEAM" ​Presents:
AT&T ICS 4.0.4
7.7.1Q-144_MB886_MR1-22_SIGNED_CFC.xml.zip
Upload by Skrilax_CZ, Download Coming Soon in http://sbf.droid-developers.org/dinara/list.php
Upload by daywalker04, Download Coming Soon in http://forum.xda-developers.com/showthread.php?t=1853522​

Live: http://sbf.droid-developers.org/dinara/list.php

Just got my first Motorola with this phone, but think I borked it by messing with the radio bands. How does one flash these .xml or .sbf files to restore to original stock?

failed flashing process..unknown fastboot comand

I'm grabbing this for my friend, he can't get the update because he needs Wi-Fi and the phone won't connect to our University's Wi-Fi network. This won't break OTA for him though will it?

It's just as same as if you have applied OTA.

what is the update process?
Skrilax_CZ said:
It's just as same as if you have applied OTA.
Click to expand...
Click to collapse
so what exactly is the update procedure?
Here's what my phone is showing me.
system version: 77.1.7.MB886.ATT.en.US
android version: 4.0.3
Will this update change anything with the bootloader or anything like that?

aerohp said:
so what exactly is the update procedure?
Here's what my phone is showing me.
system version: 77.1.7.MB886.ATT.en.US
android version: 4.0.3
Will this update change anything with the bootloader or anything like that?
Click to expand...
Click to collapse
If you got 4.0.3 we need a copy of your OS before you upgrade. 4.0.3 has vulnerabilities that we need to get root. Sorry I don't know the procedure, but I am sure some dev will be more than willing to tell you.

Skrilax_CZ said:
It's just as same as if you have applied OTA.
Click to expand...
Click to collapse
popfan said:
If you got 4.0.3 we need a copy of your OS before you upgrade. 4.0.3 has vulnerabilities that we need to get root. Sorry I don't know the procedure, but I am sure some dev will be more than willing to tell you.
Click to expand...
Click to collapse
are there any specifics to the vulnerabilities?
anyways, if someone lets me know how make a copy of the OS, i'd be more than willing to do so.

aerohp said:
are there any specifics to the vulnerabilities?
anyways, if someone lets me know how make a copy of the OS, i'd be more than willing to do so.
Click to expand...
Click to collapse
Just saw this and need to let you know not to do any soft of fastboot or updating without backing up your files. The worry is you flash a retail bootloader and possibly cannot go back if you use these.

mattlgroff said:
Just saw this and need to let you know not to do any soft of fastboot or updating without backing up your files. The worry is you flash a retail bootloader and possibly cannot go back if you use these.
Click to expand...
Click to collapse
yeah, that's why i'm holding out... battery life sucks on the 4.0.3. it barely gets me 8-9 hours with moderate use. i've noticed there are huge drops in the battery level every now and then. i guess i'll just deal with it until we get the root thing sorted out.

is there a way to just mount the system.img.ext4? i've tried ext2explore and i've tried to mount it with Linux Reader. thanks

mrvirginia said:
is there a way to just mount the system.img.ext4? i've tried ext2explore and i've tried to mount it with Linux Reader. thanks
Click to expand...
Click to collapse
i'm wondering the same thing...i'm not flashing this on my phone but a friend of mine has a retail 4.0.4 and can't get the OTA. i;m not really sure how to flash this. i was hoping for it to be an sbf but thats not the case. can someone point the way please?

aerohp said:
i'm wondering the same thing...i'm not flashing this on my phone but a friend of mine has a retail 4.0.4 and can't get the OTA. i;m not really sure how to flash this. i was hoping for it to be an sbf but thats not the case. can someone point the way please?
Click to expand...
Click to collapse
just use fastboot oem fb_mode_set
then fastboot flash .......

cmvienneau said:
just use fastboot oem fb_mode_set
then fastboot flash .......
Click to expand...
Click to collapse
Flash what exactly? I've been trying this for the past hour and rsdlite won't work, moto-fastboot doesn't give any hints. I've tried MR1-22 and FFW-14.

darknessrise1234 said:
Flash what exactly? I've been trying this for the past hour and rsdlite won't work, moto-fastboot doesn't give any hints. I've tried MR1-22 and FFW-14.
Click to expand...
Click to collapse
Edit the XML file within the ZIP. Remove the two lines that contain "GETVAR". then flash the zip

mandrsn1 said:
Edit the XML file within the ZIP. Remove the two lines that contain "GETVAR". then flash the zip
Click to expand...
Click to collapse
After removing that, the modem lines and the oem_mode_set one... It still fails on the system.img.ext4.
EDIT: Out of thoughts. Stuck with a fastboot loop. Won't even allow me to turn it off.

I installed beats installer and my phone will not reboot. Any Ideas?

tried the same thing, now stuck at the boot animation. I have tried factory reset as well as downloading the firmware and trying to update from the sd card in recovery. No luck. It is now a brick unless someone can help...

Av8tor86 said:
tried the same thing, now stuck at the boot animation. I have tried factory reset as well as downloading the firmware and trying to update from the sd card in recovery. No luck. It is now a brick unless someone can help...
Click to expand...
Click to collapse
This sucks, I have no idea what could have happened. I really hope someone can help!!

How to get your BELL ATRIX HD onto At&t Jellybean (4.1.1) - Unlocked bootloader ONLY!

How to get your BELL ATRIX HD onto At&t Jellybean (4.1.1) - Unlocked bootloader ONLY!
I would like to start saying that I’m not responsible for whatever happens to your phone. Thanks to MATTLGROFF who figure out this way of flashing this jellybean leak on my phone.
Having that said THIS IS ONLY FOR BELL ATRIX HD USERS THAT HAVE THEIR BOOTLOADER UNLOCKED. Please read thru and ask any questions before attempting
OK here we go:
1. I assume you’re in stock BELL ICS ROM (77.55.18.MB886.BellMobility.en.CA) … it doesn’t matter if you’re rooted or not. Make sure you have the motorola drivers installed.
2. Enable debugging mode on your phone (settings>development options> enable USB debugging)
3. MAKE SURE YOU HAVE AN UNLOCKED BOOTLOADER. To do this open command prompt and type “adb reboot-bootloader” and check....
a. It should say: "Device is UNLOCKED. Status Code:1"
4. Now double check you’re unlocked.
5. Make sure you have a charged battery (more than 60%) and boot into fastboot. (if you're not already here)
6. Now download the stock ICS zip for At&t.
a. Unzip it
b. Make sure you have the fastboot files in the same folder/path as your fxz files.
c. Flash the boot.img from the at&t zip.
i. Hold the shift key down and right click on the unzipped folder. Now in the dropdown menu click “open command prompt here”
ii. Now type “fastboot flash boot boot.img”
d. Flash the system.img
i. "Fastboot flash system system.img”
ii. you should be in Stock att ICS rom now.
7. Now download the file for the stock at&t Jellybean zip. ( you will be able to go back to ICS --I have gone back to stock 4.0.4 Bell ROM-- bc you’re only flashing boot and system images)
8. Now start back at step 6 but with the jelly bean leak ---- Or you can try just going to settings and checking for updates! (haven't tried this yet - don't know if it will flash something we don't want it to UPDATE: I guess it doesn't work)
9. You should be on AT&T Jellybean now - and you probably(thanks soulja) lost root...
Fastboot link: https://www.dropbox.com/s/rhlcajoerowtpiw/fastboots.zip
Stock ICS link: http://forum.xda-developers.com/showthread.php?t=1853522
Stock JB link: https://www.dropbox.com/s/65ro5ddf5mhdc9f/7.7.1Q-144_MB886_MR1-22_SIGNED_CFC.xml.zip

reserved. IF you have any questions please ask!

gabo_e30 said:
3. MAKE SURE YOU HAVE AN UNLOCKED BOOTLOADER. To do this open command prompt and type “adb reboot-bootloader” and check....
a. It should say: "Device is UNLOCKED. Status Code:1"
4. Now double check you’re unlocked.
5. Make sure you have a charged battery (more than 60%) and boot into fastboot. (if you're not already here)
Click to expand...
Click to collapse
You might want to just clarify that "adb reboot-bootloader" puts the device into fastboot. Took me a few minutes to figure that out.
gabo_e30 said:
9. You should be on Jellybean now - and you prolly lost root...
Click to expand...
Click to collapse
...probably! not "prolly"!
OK, so I think I followed the directions properly, it appears SafeStrap is gone, and I now get new boot animations, a "thumping" Motorola logo and then an AT&T Rethink Possible. But it seems to be stuck after it plays that, with the AT&T logo and "Rethink Possible" message. Help!
UPDATE: After much flailing about, I got it into Recovery mode (could only get there by adb reboot recovery, the vol up/down + pwr only gets me a white texted menu which included "factory" but didn't do anything".) Will see if this works.
UPDATE 2: YES! After the factory reset, I let it boot up again. I was about to give up and try going back to ICS, but then it went past the Rethink Possible logo to a configure phone screen.
UPDATE 3: What... OK so it thinks it's an AT&T phone now, that's OK. It also shows it connected to 4G which it never has (always E, H or H++) But it's still on 4.0.4 ICS even though I did load the JB rom. But I just checked updates and it's got 4.1.1!!
UPDATE 4: Update (98.4.20.en.US) downloaded. Hitting install now...
UPDATE 5: CRAP. After reboot "The software update failed!" I might try reflashing the file from 7.7.1Q-144_MB886_MR1-22_SIGNED_CFC
UPDATE 6: No joy. :/ Any tried flashing Blur_Version.77.12.22.MB886.ATT.en.US.zip? After the above procedure, is my phone now "really" an AT&T phone?
UPDATE 7: I followed the thread about fixing failed update http://forum.xda-developers.com/showthread.php?t=2050416, and then got the OTA update. THIS TIME IT WORKS!!! I did lose root though. Oh well. I tried motofail2go again, but I couldn't get the "bug report" vibrate to happen.

noob problem with adb
3. MAKE SURE YOU HAVE AN UNLOCKED BOOTLOADER. To do this open command prompt and type “adb reboot-bootloader” and check....
a. It should say: "Device is UNLOCKED. Status Code:1"
sorry where in PC or in motorola atrix ? need i another app ? thanks in advance
i just unlocked root with Motofail2Go

w0hnzimmer said:
3. MAKE SURE YOU HAVE AN UNLOCKED BOOTLOADER. To do this open command prompt and type “adb reboot-bootloader” and check....
a. It should say: "Device is UNLOCKED. Status Code:1"
sorry where in PC or in motorola atrix ? need i another app ? thanks in advance
Click to expand...
Click to collapse
First step is actually to get Motorola drivers installed on your PC, as well as adb tools. Sorry I don't have a link handy. Then from PC do the "adb reboot-bootloader".

Can this be done with at&t and why not ?
Seems like you can go jb > ics easily.

souljaboy said:
Can this be done with at&t and why not ?
Seems like you can go jb > ics easily.
Click to expand...
Click to collapse
Step #4 and the title to the thread.
Sent from my MB886 using xda premium

capran said:
First step is actually to get Motorola drivers installed on your PC, as well as adb tools. Sorry I don't have a link handy. Then from PC do the "adb reboot-bootloader".
Click to expand...
Click to collapse
thanks, now i got "Device is LOCKED. Status Code: 0"
any chance to unlock ?
regards

w0hnzimmer said:
thanks, now i got "Device is LOCKED. Status Code: 0"
any chance to unlock ?
regards
Click to expand...
Click to collapse
The title of this threads says "Unlocked bootloader ONLY!" You haven't unlocked it yet. Please go read up on how to do that first.
1. Root. http://forum.xda-developers.com/showthread.php?t=1940594
2. Can't seem to find the bootloader bit...

ATGAdmin said:
Step #4 and the title to the thread.
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
i know...
what unlocked changes is, you can replace the kernel... but the RSDLite can replace it too, i dont quite get it.

capran said:
You might want to just clarify that "adb reboot-bootloader" puts the device into fastboot. Took me a few minutes to figure that out.
...probably! not "prolly"!
OK, so I think I followed the directions properly, it appears SafeStrap is gone, and I now get new boot animations, a "thumping" Motorola logo and then an AT&T Rethink Possible. But it seems to be stuck after it plays that, with the AT&T logo and "Rethink Possible" message. Help!
Click to expand...
Click to collapse
YOu need to do a factory reset! Sorry forgot to include that in the steps! My Bad!
UPDATE: After much flailing about, I got it into Recovery mode (could only get there by adb reboot recovery, the vol up/down + pwr only gets me a white texted menu which included "factory" but didn't do anything".) Will see if this works.
UPDATE 2: YES! After the factory reset, I let it boot up again. I was about to give up and try going back to ICS, but then it went past the Rethink Possible logo to a configure phone screen.
Click to expand...
Click to collapse
YESSS!!! you figured it out!
UPDATE 3: What... OK so it thinks it's an AT&T phone now, that's OK. It also shows it connected to 4G which it never has (always E, H or H++) But it's still on 4.0.4 ICS even though I did load the JB rom. But I just checked updates and it's got 4.1.1!!
Click to expand...
Click to collapse
Yeah 4G is the same as H+, that's just how At&t symbolizes it
UPDATE 4: Update (98.4.20.en.US) downloaded. Hitting install now...
UPDATE 5: CRAP. After reboot "The software update failed!" I might try reflashing the file from 7.7.1Q-144_MB886_MR1-22_SIGNED_CFC
Click to expand...
Click to collapse
I guess it won't work huh?... we were lucky if it did!
UPDATE 6: No joy. :/ Any tried flashing Blur_Version.77.12.22.MB886.ATT.en.US.zip? After the above procedure, is my phone now "really" an AT&T phone?
Click to expand...
Click to collapse
No it's not really an at&t phone... you can flash back the Bell 4.0.4 ROM (I just did it). Remember it will ONLY WORK IF YOU HAVE AN UNLOCKED BOOTLOADER!
UPDATE 7: I followed the thread about fixing failed update http://forum.xda-developers.com/showthread.php?t=2050416, and then got the OTA update. THIS TIME IT WORKS!!! I did lose root though. Oh well. I tried motofail2go again, but I couldn't get the "bug report" vibrate to happen.
Click to expand...
Click to collapse
Cool you found a solution...(?) But it should work with the above Jellybean file. Gonna try it out again myself!

w0hnzimmer said:
3. MAKE SURE YOU HAVE AN UNLOCKED BOOTLOADER. To do this open command prompt and type “adb reboot-bootloader” and check....
a. It should say: "Device is UNLOCKED. Status Code:1"
sorry where in PC or in motorola atrix ? need i another app ? thanks in advance
i just unlocked root with Motofail2Go
Click to expand...
Click to collapse
Ok. SO install the moto drivers first (just google them -Motocast)
Now the fastboot files and put them in the same folder or path of the system and boot.img
Now connect your phone and make sure its in debugging mode
Open command prompt (cmd) in the folder you have the files you want to install. (do this by holding shift and right click on that folder)
Now type adb reboot bootloader IN CMD. You phone should reboot into fastboot! :victory:

capran said:
The title of this threads says "Unlocked bootloader ONLY!" You haven't unlocked it yet. Please go read up on how to do that first.
1. Root. http://forum.xda-developers.com/showthread.php?t=1940594
2. Can't seem to find the bootloader bit...
Click to expand...
Click to collapse
Capran you can't install it following this procedure. It won't work or you will brick.
This si only for unlocked bootloader Atrix HDs. There's only a few of them out there (they all seem to be BELL models, but not all Bell models) I think its the ones that shipped with system version: 77.55.17.MB886.BellMobility.en.CA. TheBootloader version is 10.96 i believe... and the locked one is 10.97 I think...

souljaboy said:
i know...
what unlocked changes is, you can replace the kernel... but the RSDLite can replace it too, i dont quite get it.
Click to expand...
Click to collapse
From what I understand is that RSDlite changes it but after and Only with kernels and files that r signed (by Moto)

gabo_e30 said:
Capran you can't install it following this procedure. It won't work or you will brick.
This si only for unlocked bootloader Atrix HDs. There's only a few of them out there (they all seem to be BELL models, but not all Bell models) I think its the ones that shipped with system version: 77.55.17.MB886.BellMobility.en.CA. TheBootloader version is 10.96 i believe... and the locked one is 10.97 I think...
Click to expand...
Click to collapse
How about the 77.55.18.MB886.BellMobility.en.CA can we flash it to our unlocked Atrix hd? I saw that there's an update to JB 4.1.2. on this version. Thanks
Sent from my MB886 using xda premium

I have an unlocked Bell Atrix HD. It was running 77.55.17 and I tried this method of flashing the AT&T software using fastboot and it didn't work. I could flash the boot.img, but when I went to flash the system.img.ext4 it would tell me that I had exceeded the download buffer. So at this point I had flashed the boot.img already and the phone wouldn't boot. I actually couldn't get any system.img files to flash from fastboot, even the Bell one, always the same exceeded the download buffer error. So I downloaded RSD lite and flashed the 77.55.18 Bell firmware to it via RSD lite and I was back in business again. At this point I just said to heck with it with fastboot and then flashed the stock ICS AT&T firmware via RSD lite only having used the modified XML file that is suggested to use. This worked perfectly fine as well. I was then able to root with motofail and use voodoo to backup my root. Then I just let it do the JB update OTA and that worked perfectly fine as well and then restored my root through voodoo and verified I still had root. Everything looks fine. The funny thing is I'm selling this phone, I have a Galaxy Note II now, but I was worried if I sold it with the Bell firmware nobody would want it since it was still ICS. Should be a bonus to someone that its unlocked, and rooted already hopefully.

ryuben2k said:
How about the 77.55.18.MB886.BellMobility.en.CA can we flash it to our unlocked Atrix hd? I saw that there's an update to JB 4.1.2. on this version. Thanks
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
I used RSDlite (the latest one) to flash the 77.55.18 version on my phone.. now its the one im currently running. SO yeah you can flash it! ( i still don't have an update though) Link for teh FXZ file is in the OP (same place where the ICS at&t ROM is)

BHUGHESVA said:
I have an unlocked Bell Atrix HD. It was running 77.55.17 and I tried this method of flashing the AT&T software using fastboot and it didn't work. I could flash the boot.img, but when I went to flash the system.img.ext4 it would tell me that I had exceeded the download buffer. So at this point I had flashed the boot.img already and the phone wouldn't boot. I actually couldn't get any system.img files to flash from fastboot, even the Bell one, always the same exceeded the download buffer error. So I downloaded RSD lite and flashed the 77.55.18 Bell firmware to it via RSD lite and I was back in business again. At this point I just said to heck with it with fastboot and then flashed the stock ICS AT&T firmware via RSD lite only having used the modified XML file that is suggested to use. This worked perfectly fine as well. I was then able to root with motofail and use voodoo to backup my root. Then I just let it do the JB update OTA and that worked perfectly fine as well and then restored my root through voodoo and verified I still had root. Everything looks fine. The funny thing is I'm selling this phone, I have a Galaxy Note II now, but I was worried if I sold it with the Bell firmware nobody would want it since it was still ICS. Should be a bonus to someone that its unlocked, and rooted already hopefully.
Click to expand...
Click to collapse
Glad you worked it out! The first time I did it was from the 77.55.17 version, then I updated to at&t ICS the to JEllybean and now back to Bell ICS (77.55.18) Not sure what happened, but still glad you worked it out!
That's the great thing about the forums we can all work together in solving issues!

gabo_e30 said:
Glad you worked it out! The first time I did it was from the 77.55.17 version, then I updated to at&t ICS the to JEllybean and now back to Bell ICS (77.55.18) Not sure what happened, but still glad you worked it out!
That's the great thing about the forums we can all work together in solving issues!
Click to expand...
Click to collapse
Indeed, so glad I didn't brick it, lol. Maybe it was something wrong with the fastboot executables I used, I used the same ones I had downloaded a couple weeks ago to flash the HTC One V's that I got my kids for Christmas and not the ones linked to in the original post. It worked fine for for the One V's, not for the Atrix HD for some reason. Oh well, I just like tinkering with this stuff.

gabo_e30 said:
I used RSDlite (the latest one) to flash the 77.55.18 version on my phone.. now its the one im currently running. SO yeah you can flash it! ( i still don't have an update though) Link for teh FXZ file is in the OP (same place where the ICS at&t ROM is)
Click to expand...
Click to collapse
Thanks. Here's the link that i saw from motorola that there's an update for 77.55.18. and if someone from here can prove that they already upgrade to 4.1.2.
Thanks
https://motorola-global-en-usa.custhelp.com/app/answers/detail/a_id/92147
Sent from my MB886 using xda premium

[TOOL] Preparing for KitKat: Return to OTA Path from any ROM

This scripted tool (Windows Only!) I have written and packaged will allow you to return back to the stock OTA path from ANY single ROM (stock or custom) you might be running or even if your device is soft bricked at the moment (without even requiring RSD Lite).
Download the zip file: http://www.androidfilehost.com/?fid=23487008491965516
Unpack the zip file to your PC
Install Motorola Drivers First!
Then run the TOOL file and follow the instructions to guide you
I have also included some screenshots and an Emergency Fix in case you are stuck in Fastboot for whatever reason and need to restore back to stock and then continue the tool (automatically continues from the fix).
WARNING THIS WILL COMPLETELY WIPE ALL DATA INCLUDING YOUR INTERNAL STORAGE!
MAKE SURE TO BACKUP EVERYTHING YOU NEED BEFORE USING THE TOOL OR THE EMERGENCY FIX!

The emergency utility was able to get me out of my soft brick. Thank you sir!

xt925
Does it works on xt925 ?
Thanks.

morcego.surf said:
Does it works on xt925 ?
Thanks.
Click to expand...
Click to collapse
It does, the emergency will flash an XT926 firmware, might have to change internal files I guess. It did got me out of a flash failure then could get back into fastboot and then flash my Telcel firmware for my XT925.

Is this for XT925?! Is this the first thing i have to do to get Kit Kat official leaked last week?

andreluigo said:
Is this for XT925?! Is this the first thing i have to do to get Kit Kat official leaked last week?
Click to expand...
Click to collapse
i have seen some lazy people, but i must say you take the cake.
this thread was 4 hole post long before you posted. 2 of which, asked and answered your exact first question.
no self respecting person is going to help you, when you cant even read a 4 post long thread before asking a question in it.

open1your1eyes0 said:
This scripted tool (Windows Only!) I have written and packaged will allow you to return back to the stock OTA path from ANY single ROM (stock or custom) you might be running or even if your device is soft bricked at the moment (without even requiring RSD Lite).
Download the zip file: http://www.androidfilehost.com/?fid=23487008491965516
Unpack the zip file to your PC
Install Motorola Drivers First!
Then run the TOOL file and follow the instructions to guide you
I have also included some screenshots and an Emergency Fix in case you are stuck in Fastboot for whatever reason and need to restore back to stock and then continue the tool (automatically continues from the fix).
WARNING THIS WILL COMPLETELY WIPE ALL DATA INCLUDING YOUR INTERNAL STORAGE!
MAKE SURE TO BACKUP EVERYTHING YOU NEED BEFORE USING THE TOOL OR THE EMERGENCY FIX!
Click to expand...
Click to collapse
Just wanted to thank you for creating this tool, man. The Emergency Fix really saved my skin from a soft brick.

Pretty sure this utility has bricked my phone. I was on 4.1.2 and was rooted and tried using the utility to return to stock. After the utility completed it gets stuck on the AP fastboot menu and it says Boot Failure. Any ideas to fix it?

Nice to know it.

open1your1eyes0 said:
This scripted tool (Windows Only!) I have written and packaged will allow you to return back to the stock OTA path from ANY single ROM (stock or custom) you might be running or even if your device is soft bricked at the moment (without even requiring RSD Lite).
Download the zip file: http://www.androidfilehost.com/?fid=23487008491965516
Unpack the zip file to your PC
Install Motorola Drivers First!
Then run the TOOL file and follow the instructions to guide you
I have also included some screenshots and an Emergency Fix in case you are stuck in Fastboot for whatever reason and need to restore back to stock and then continue the tool (automatically continues from the fix).
WARNING THIS WILL COMPLETELY WIPE ALL DATA INCLUDING YOUR INTERNAL STORAGE!
MAKE SURE TO BACKUP EVERYTHING YOU NEED BEFORE USING THE TOOL OR THE EMERGENCY FIX!
Click to expand...
Click to collapse
Hello,
Could you please write in big red letters in the beginning of your post : "ONLY FOR XT926, Do not use it for XT925" ?
Thank you

yoderz said:
Pretty sure this utility has bricked my phone. I was on 4.1.2 and was rooted and tried using the utility to return to stock. After the utility completed it gets stuck on the AP fastboot menu and it says Boot Failure. Any ideas to fix it?
Click to expand...
Click to collapse
Were you able to fix?
for OP, I have similar situation as yoderz on verizon, I get "Software Update Failed" and no OTA. Stuck on 9.18.XT926.Verizon.en.US

150kwh said:
Were you able to fix?
for OP, I have similar situation as yoderz on verizon, I get "Software Update Failed" and no OTA. Stuck on 9.18.XT926.Verizon.en.US
Click to expand...
Click to collapse
Took me over 6 hours to fix it. I finally found this post and it worked. I had to sign up for their forum, but it was worth it.
http://www.droidrzr.com/index.php/topic/45494-fxz-442-1834610/
Good luck!

yoderz said:
Took me over 6 hours to fix it. I finally found this post and it worked. I had to sign up for their forum, but it was worth it.
http://www.droidrzr.com/index.php/topic/45494-fxz-442-1834610/
Good luck!
Click to expand...
Click to collapse
Thanks, worked for me now. Super happy to luck out on timing so I could get unlocked & root, wish I had seen this earlier.
..Now, if only their forum would validate me. (Maybe a week timeout??)

yoderz said:
Took me over 6 hours to fix it. I finally found this post and it worked. I had to sign up for their forum, but it was worth it.
http://www.droidrzr.com/index.php/topic/45494-fxz-442-1834610/
Good luck!
Click to expand...
Click to collapse
so you have XT925 and this link helped you fix the install, and you're now on the official KK? does LTE and GSM work for you?

Odd "bricking"

OK, twice now this has happened.
The first time was after I updated some apps. The second was when I had installed a new app.
Initially several apps then fail to work, they open and close straight away.
I reboot and phone hangs on first M screen - before the swirly white bits.
Into recovery from there shows dead Android with open chest and Explanation mark (I think)
Factory reset from recovery fail doesn't seem to do anything
Only solution is to flash official ROM using RSD
Phone is totally UK Orange Stock - not unlocked or rooted.

Eserim said:
OK, twice now this has happened.
The first time was after I updated some apps. The second was when I had installed a new app.
Initially several apps then fail to work, they open and close straight away.
I reboot and phone hangs on first M screen - before the swirly white bits.
Into recovery from there shows dead Android with open chest and Explanation mark (I think)
Factory reset from recovery fail doesn't seem to do anything
Only solution is to flash official ROM using RSD
Phone is totally UK Orange Stock - not unlocked or rooted.
Click to expand...
Click to collapse
To access recovery in the Android with open chest and Explanation mark : press Volume up AND down some times to get in recovery
and in recovery try factory reset.

ManoBros said:
To access recovery in the Android with open chest and Explanation mark : press Volume up AND down some times to get in recovery
and in recovery try factory reset.
Click to expand...
Click to collapse
Thanks for that, it may be useful in future, but any ideas what may have caused this?

Eserim said:
Only solution is to flash official ROM using RSD
Click to expand...
Click to collapse
I have the same issue right now, what do I have to do? Where can I get an official ROM and can I just flash the ROM on an locked and unrooted phone? I have O2 DE phone. Thanks.

lukassek said:
I have the same issue right now, what do I have to do? Where can I get an official ROM and can I just flash the ROM on an locked and unrooted phone? I have O2 DE phone. Thanks.
Click to expand...
Click to collapse
See http://forum.xda-developers.com/razr-i/general/index-razr-t2832722 - should answer all your questions - but yes, you can use RSD on any phone, without unlocking or rooting - it is the official Motorola tool. The O2 De ROMs are on the linked page http://forum.xda-developers.com/showthread.php?t=2028814

Eserim said:
See http://forum.xda-developers.com/razr-i/general/index-razr-t2832722 - should answer all your questions
Click to expand...
Click to collapse
Well, it didn't, I'm still getting this: 'Please check input file. Either XML format is wrong or image files associated is missing' after exctacting through RSD Lite. And I can't get further.

lukassek said:
Well, it didn't, I'm still getting this: 'Please check input file. Either XML format is wrong or image files associated is missing' after exctacting through RSD Lite. And I can't get further.
Click to expand...
Click to collapse
By looking at your other post you are using this zip file in RSD-lite: http://forum.xda-developers.com/showthread.php?t=2028814
As the Titel of the thread says, they are 'OTA' updates. So only usable through recovery and when going from a working 4.0.4 stock rom to 4.1.2.
That's why u are getting that error. The zip is not intended to be used through RSD-Lite.
U will need to get your hands on a JB RSD-Lite firmware zip file. This site: http://motofirmware.com/files/category/24-smi/
Has some firmwares, not all.

Hazou said:
U will need to get your hands on a JB RSD-Lite firmware zip file. This site: http://motofirmware.com/files/category/24-smi/
Has some firmwares, not all.
Click to expand...
Click to collapse
Thanks I followed Eserims advise. I also found this site: http://forum.xda-developers.com/showthread.php?t=2239706 before, but only working link was Retail UK/British and I wasn't sure if I can use it since i have O2DE.
But on the site you showed me I found this: CFC_9.8.2I-50_SMI-26_S7_USASMIJBO2DE.xml.zip. I don't know what CFC means, but I'm going to try it, thank you.
Update:
It's working... Couple of days reading threads, searching the internet and nothing, than Hazou came and it's done, thaks again.

lukassek said:
Thanks I followed Eserims advise. I also found this site: http://forum.xda-developers.com/showthread.php?t=2239706 before, but only working link was Retail UK/British and I wasn't sure if I can use it since i have O2DE.
But on the site you showed me I found this: CFC_9.8.2I-50_SMI-26_S7_USASMIJBO2DE.xml.zip. I don't know what CFC means, but I'm going to try it, thank you.
Update:
It's working... Couple of days reading threads, searching the internet and nothing, than Hazou came and it's done, thaks again.
Click to expand...
Click to collapse
No problem, I am pleased it worked out for you!