Hello,
I have tried alot on installing the black nav bars on my Z-but without luck. I have been rooting phones alot, but this think i am new too.
I would appriciate if someone could explain it step-by step to me,
I also have another question:
I installed recovery several days ago(locked bootloader) and it worked fine. But just the other day it didnt work anymore. I tried to install again, but no result. Help?
Thank you,
HypnOtizer12 said:
Hello,
I have tried alot on installing the black nav bars on my Z-but without luck. I have been rooting phones alot, but this think i am new too.
I would appriciate if someone could explain it step-by step to me,
I also have another question:
I installed recovery several days ago(locked bootloader) and it worked fine. But just the other day it didnt work anymore. I tried to install again, but no result. Help?
Thank you,
Click to expand...
Click to collapse
Which recovery did you install? I had problems with CWM Recovery so I installed TWRP and it works flawlessly on my phone. The installation is also very simple as you can do it through an apk. Here is a link http://forum.xda-developers.com/showthread.php?t=2190936
With regards to the black status and notification bar I installed one from here http://forum.xda-developers.com/showthread.php?t=2178024
shem2409 said:
Which recovery did you install? I had problems with CWM Recovery so I installed TWRP and it works flawlessly on my phone. The installation is also very simple as you can do it through an apk. Here is a link http://forum.xda-developers.com/showthread.php?t=2190936
With regards to the black status and notification bar I installed one from here http://forum.xda-developers.com/showthread.php?t=2178024
Click to expand...
Click to collapse
I tried to install the one you linked but it still wont show up when pressing "volume up" , i also tried to run recovery from ROM manager, but still doesent work.
The black bars you linked to is the one i have tried to install. I dont understand quite what i shall do ? Please post a tutorial?
Related
I can't seem to get the Update.zip to work and now my ds7 only shows the cwm rec boot loader. Pls hlp me. Thank you.
So i did some reading and what i did wrong was factory reset from the settings menu not cwm. No instructions were clear how to fix my mistake. Help would be awesome. Any help i could get can be rewarded money. cwm 3.0.2.0
OMG, i also did a factory reset and now it is stuck on cwm, can't even get into fastboot mode
GUYS, please help.. this is bad as I've been searching the forums for an answer and all i see is to try fastboot.. thanks in advance
I heard this works haven't tried it yet since I left mine at my buddies house to fix it. http://forum.xda-developers.com/showthread.php?t=1018809
RichieRich84 said:
I heard this works haven't tried it yet since I left mine at my buddies house to fix it. http://forum.xda-developers.com/showthread.php?t=1018809
Click to expand...
Click to collapse
Don't worry guys, I almost went crazy just now thinking mine was "bricked" as well when it really wasnt. Restore with the following method will fix it
DO NOT FORGET to press both volume + and volume - at the same time so that your computer will detect it as a NVFlash device and the nvflash method (with batch file) will pick it up as a driver and reflash your device to stock. I made that mistake as well
Hi guys,
I tried to root my razr i XT890.
Successfully I could easily unlock the bootloader.
But the CWM flash/installation didn't work.
I tried dozens of tutorials and youtube instructions, even the installer.
But when I rebooted to make the final root, it was again the stock recovery :crying:
Can someone help me?
More specific: in the command line (pc) it said it finished flashing, while in the phone it said "flashing" for several minutes. so I just rebooted.
Currently I'm stuck in the stock recovery. Can't do anything. Screen is on. Dammit. I think I have to wait till the battery is empty :/
As an emergency, you can force turn off by pressing pwr+VolUp+VolDn keys all three at the same time for about 8 seconds, the phone should shutdown... let us know how does it come up after rebooting...
.
nick7722 said:
As an emergency, you can force turn off by pressing pwr+VolUp+VolDn keys all three at the same time for about 8 seconds, the phone should shutdown... let us know how does it come up after rebooting...
.
Click to expand...
Click to collapse
Thank you very much it did work.
Do you have any idea about the cwm?
I used the same installer you're referencing above (by Lebobo), but installed TWRP instead, it has always worked fine for me, it has the same features (and then some more) than CWM recovery... it's worth a try...
.
nick7722 said:
I used the same installer you're referencing above (by Lebobo), but installed TWRP instead, it has always worked fine for me, it has the same features (and then some more) than CWM recovery... it's worth a try...
.
Click to expand...
Click to collapse
I tried it already. Without success :crying:
mmmm let's see, you say you get stock recovery back after a reboot, that means you have got custom recovery at one time to attempt rooting, is this correct?
What rooting method are you attempting? I recall using a RazrIRoot2.1[JB].zip file to gain root... actually it's still in my microSD card...
.
nick7722 said:
mmmm let's see, you say you get stock recovery back after a reboot, that means you have got custom recovery at one time to attempt rooting, is this correct?
What rooting method are you attempting? I recall using a RazrIRoot2.1[JB].zip file to gain root... actually it's still in my microSD card...
.
Click to expand...
Click to collapse
actually it was all the time the stock recovery. I think.
Yes I planned to root with the RazrIRoot2.1[JB].zip file once I solved the CWM installation
.
Well, it should be very straight forward, bootloader should be unlocked and USB debugging enabled for it to work, can't think of other prerequisite... if you have these two you should be good to go... it should not be necessary, but probably try a factory reset / cache and dalvik wipe... but you would loose all of your data... then again enable usb debugging...
.
As I said the Bootloader is unlocked. USB debugging is of course enabled.
Android is JB 4.1.2 Could this be a reason?
http://www.handy-faq.de/forum/showthread.php?p=2566441
Try our TWRP or CWM Flasher. Connect with USB Debugging enabled, start the FlashTWRP.bat.
After it flashed the Recovery, it will bring you right back into the Bootloader. Select Recovery with Vol.down, accept with vol. up and get rooted :thumbup:
Gesendet von meinem XT890 mit Tapatalk 2
You should be able to flash recovery in JellyBean with no problem using Lebobo's installer, that's not an issue... have you tried this version as well? There are options for black and white, that is only the interface, they work the same...
Thank you sooo much HSD-Pilot.It worked immediately.
I try now to install Omars Rom and after that Pdroid.
*
Congrats Janine! Let us know how it goes with PDroid, I understand is not compatible with RazrI...
*
Is it not compatible??
Janine Belle said:
Is it not compatible??
Click to expand...
Click to collapse
This is what I get in Google Play
.
Hi!
I installed frameworks (xposed-v86-sdk21-arm) to my note 3 SM-N9005, which is rooted with odin and n9005-cwm-recovery-6.0.4.7.. After i installed this zip, phone wotn start right.. its only getting this "Samsung"-text and its flashing it, nothing more havent happened for 1h. I went to recovery setting and cleared data and others.. but same problem.. Also i runned xposed-uninstaller but wont work..
What should i do? Plz help me!
Androvsky said:
Hi!
I installed frameworks (xposed-v86-sdk21-arm) to my note 3 SM-N9005, which is rooted with odin and n9005-cwm-recovery-6.0.4.7.. After i installed this zip, phone wotn start right.. its only getting this "Samsung"-text and its flashing it, nothing more havent happened for 1h. I went to recovery setting and cleared data and others.. but same problem.. Also i runned xposed-uninstaller but wont work..
What should i do? Plz help me!
Click to expand...
Click to collapse
Are you sure you carefully read all the information about the official Xposed version by rovo89?
Go here and read, especially the red text. Afterwards, go here and read post #2.
This will be for the SM-G935D/SC-02H Japanese variant of the s7 edge.
Stock ODIN firmware: https://www.androidfilehost.com/?fid=817550096634767393 (SC02HOMU1BQC5 Nougat)
TWRP 3.1.1: https://www.androidfilehost.com/?fid=673791459329056265
HKROM V2: https://www.androidfilehost.com/?fid=817550096634771123
HKernel for hero2qltedcm V2 (June):https://www.androidfilehost.com/?fid=961840155545571333
Kernel includes:
CVE updated
Permissive
F2FS support
Ramdisk changes the same as hero2qltechn variant. (All changes are the same)
Kernel Change-log:
https://github.com/travismills82/android_kernel_samsung_msm8996/commits/test-tw-7.0
TWRP Unofficial:
F2FS Support
More partitions supported for backup and restore compared to official version
How to root this device: https://forum.xda-developers.com/s7-edge/how-to/guide-sm-g9350-s7-edge-qualcomm-sd820-t3410969
Really amazing developer I've met!
Thank you so much @travis82
after i flash this i can't even access download mode and recovery mode. my phone keeps restarting with message "Recovery Booting (Blue text color) and "Set Warranty Bit: Recovery" (Yellow Text Color) please help me.
gAracUh said:
after i flash this i can't even access download mode and recovery mode. my phone keeps restarting with message "Recovery Booting (Blue text color) and "Set Warranty Bit: Recovery" (Yellow Text Color) please help me.
Click to expand...
Click to collapse
twrp 3.0.3 https://www.androidfilehost.com/?fid=817550096634747128
This recovery working for you? Others stated the one in the op works just fine, but since I do not have this device to test personally I can only go off of what users say.
it's working for me, after i flash the ROM i think my phone got bootloop that's why i boot again to download mode but when i tried to flash stock rom it gives a fail. now my phone stuck on led blue light and "Recovery Booting (Blue text color) and "Set Warranty Bit: Recovery" (Yellow Text Color). i need to wait to drain the battery and try if i can boot to download mode again.. i'm afraid if i can't access download mode again or recovery.
You guys are remembering to format data on a new twrp install or a new os version install? 6-7,7-8 get it? These roms or recoverys will not brick the devices I made them for kinda impossible.
You do know a brick right? Brick = no power nothing just a pricey paperweight.
how about my problem "Recovery Booting (Blue text color) and "Set Warranty Bit: Recovery" (Yellow Text Color) and it keeps restarting i can't access recovery either download mode
gAracUh said:
how about my problem "Recovery Booting (Blue text color) and "Set Warranty Bit: Recovery" (Yellow Text Color) and it keeps restarting i can't access recovery either download mode
Click to expand...
Click to collapse
did u unlock your bootloader? sounds like you did not.
it won't my phone to unlock bootloader everytime i run CROM it closes automatically. until now i can't believe my phone was bricked and i don't have any idea to fix this without download mode. even if i bring this to service center i think they will not to accept my phone because my warranty is already void.
hy i recently bought this(sc02h) model from Japan but currently using it in Australia. everythng is fine except for the rom.....there is lots of bloatware apps in japanese which i dont realy need and the starting animation of docomo is bothering me too. So is there anyway i can use a global firmware with no bloatware in this model?? i dont want any root or custom rom . only want to flash with odin
Thanks for ur help in advance
ch0c0lateb0yctg said:
hy i recently bought this(sc02h) model from Japan but currently using it in Australia. everythng is fine except for the rom.....there is lots of bloatware apps in japanese which i dont realy need and the starting animation of docomo is bothering me too. So is there anyway i can use a global firmware with no bloatware in this model?? i dont want any root or custom rom . only want to flash with odin
Thanks for ur help in advance
Click to expand...
Click to collapse
no global firmware only jap firmware. You got what you got and are stuck with it. Enjoy your phone.
travis82 said:
no global firmware only jap firmware. You got what you got and are stuck with it. Enjoy your phone.
Click to expand...
Click to collapse
shame....i was starting to like this blue coral version...still happy though...been using s7 black for a while now.
Kernel updated to V2 with June cve patches etc.. check changelogs in 1st post.
Hello! first of all thank you for this thread. I've been reading since the first thread that sir Travis has created.
I just can't unlock my bootloader, I think it is the reason why I am having bootloops after installing the rom , and even I install the rom in this thread I am still having the bloated one after installing.
I tried installing different CROM Services from every other sources that I found, but still no luck. CROM service has stopped -error I get when opening after installing it on my phone.
I also tried factory resetting my phone then install CROM but still same error occurs.
I hope you can help me guys. Thank you in advance!
mavin11 said:
Hello! first of all thank you for this thread. I've been reading since the first thread that sir Travis has created.
I just can't unlock my bootloader, I think it is the reason why I am having bootloops after installing the rom , and even I install the rom in this thread I am still having the bloated one after installing.
I tried installing different CROM Services from every other sources that I found, but still no luck. CROM service has stopped -error I get when opening after installing it on my phone.
I also tried factory resetting my phone then install CROM but still same error occurs.
I hope you can help me guys. Thank you in advance!
Click to expand...
Click to collapse
SC-02H/SCV33 doesn't need to unlock bootloader. Because they aren't been locked bootloader.
So there's no need to do that.
baobeatmaker said:
SC-02H/SCV33 doesn't need to unlock bootloader. Because they aren't been locked bootloader.
So there's no need to do that.
Click to expand...
Click to collapse
oh.. didnt know that. thank you bro. then I dunno what I did wrong in the process that gives me a bootloop everytime I install the ROM from this thread..
but I will try to do it again at this moment, and will be back for the result. thanks again!
mavin11 said:
oh.. didnt know that. thank you bro. then I dunno what I did wrong in the process that gives me a bootloop everytime I install the ROM from this thread..
but I will try to do it again at this moment, and will be back for the result. thanks again!
Click to expand...
Click to collapse
I tried installing ROM again, but Im still stuck at the Galaxy logo which is blinking a little fast I think with blue led light that is not blinking even a little.
mavin11 said:
I tried installing ROM again, but Im still stuck at the Galaxy logo which is blinking a little fast I think with blue led light that is not blinking even a little.
Click to expand...
Click to collapse
You need to let the phone boot about 15-20mins bro.
You just need more patient.
mavin11 said:
oh.. didnt know that. thank you bro. then I dunno what I did wrong in the process that gives me a bootloop everytime I install the ROM from this thread..
but I will try to do it again at this moment, and will be back for the result. thanks again!
Click to expand...
Click to collapse
baobeatmaker said:
You need to let the phone boot about 15-20mins bro.
You just need more patient.
Click to expand...
Click to collapse
I tried it again, I've waited for almost 1 hour, and nothing happens. I wonder, before booting, something shows at the top with yellow font color says "Set Warranty Bit : kernel", is it normal for that to show? or is it mean that Im having a corrupted boot data?
mavin11 said:
I tried it again, I've waited for almost 1 hour, and nothing happens. I wonder, before booting, something shows at the top with yellow font color says "Set Warranty Bit : kernel", is it normal for that to show? or is it mean that Im having a corrupted boot data?
Click to expand...
Click to collapse
it's really normal. Mine shown that too.
Xposed from this theme https://forum.xda-developers.com/showthread.php?t=3034811 (3.1.1.akp)
Phone - Galaxy S5,
Android 5.0, as i remember.
I tied to install the program, chose variant with backup in the installer, but now my phone is stuck on loading screen for like 20 mins, showing samsung animated logo.
What can i do now?
Are your rom is stock or custom ? And are you using which recovery ? Twrp ?
Restore your backup.
Gesendet von meinem Moto G 2014 LTE mit Tapatalk
DarkMountain said:
Are your rom is stock or custom ? And are you using which recovery ? Twrp ?
Click to expand...
Click to collapse
I don't even know what rom is. :S
uhm, well and i dont have a copy of my phone's system on PC or something like that. I'm not even sure if the installer really did a backup.
gothicVI said:
Restore your backup.
Click to expand...
Click to collapse
If i know how to do it! I'm kinda lame in phones and android. Could you tell me something i can do now? I'm currently trying to find some program for PC now, so i can connect my phone and hopefully do something
Even hard reset (Volume down + Home + Power buttons at the same time. ) does'nt works now. i keep getting the loading logo.
It seems you are new to android, custom ROM, recovery etc. and this indicate you haven't took nandroid backup of your ROM to restore it later... Now what you can try is, go to stock recovery with pressing phone buttons combination ( google it according to your phone model ) and do factory reset (warning- it will wipe all your data but may set your phone to boot and work ) ..at least try it when nothing is working
sk99 said:
It seems you are new to android, custom ROM, recovery etc. and this indicate you haven't took nandroid backup of your ROM to restore it later... Now what you can try is, go to stock recovery with pressing phone buttons combination ( google it according to your phone model ) and do factory reset (warning- it will wipe all your data but may set your phone to boot and work ) ..at least try it when nothing is working
Click to expand...
Click to collapse
Yeah, i'am.
I tried hard reset several mins ago. Problem seems to be very interesting, i wonder if i find a solution.
Will reply here if i ever get i working again.
nerinz said:
Yeah, i'am.
I tried hard reset several mins ago. Problem seems to be very interesting, i wonder if i find a solution.
Will reply here if i ever get i working again.
Click to expand...
Click to collapse
Just Google "How to back to stock with odin and write your (phone model). If you follow the guides carefully your phone will format you will lose your all data but your phone is will work.
DarkMountain said:
Just Google "How to back to stock with odin and write your (phone model).
Click to expand...
Click to collapse
Will try tomorrow, TYVM!
I managed to update my system via Odin program, everything is fine now! Even my settings\apps survived!
Thanks you all for the help.
The problem is solved.
I managed to update my system via Odin program, everything is fine now! Even my settings\apps survived!
Thanks you all for the help.
The problem is solved.
nerinz said:
I managed to update my system via Odin program, everything is fine now! Even my settings\apps survived!
Thanks you all for the help.
The problem is solved.
Click to expand...
Click to collapse
I almost bricked my Samsung G5 (the ATT version with the screwy locked bootloader, I think?) almost this exact same way about two years ago. It took a bit with ODIN and some time on the forums here, but eventually I got it working again. Not fun but I am glad everything worked out for you as well.
To be honest I learned more successfully trying to unbrick that phone than I ever would have had I not royally effed up....