Has anyone else noticed that the USB data cables that HTC gives out are terrible? My Niki is my second HTC phone and both cables that I've had have had problems with data transfer.
The first one is flaky and works sometimes. The other one never works except for charging.
I am going to buy a new cable but don't want to get one from HTC because they suck. Anyone suggest a good one?
Also, do I get a 4 pin or 5 pin data cable?
it's a normal usb cable. any USB cable will work .........
jvieira said:
it's a normal usb cable. any USB cable will work .........
Click to expand...
Click to collapse
Quite so; for data purposes, USB is USB, you don't gain anything from spending extra $$ for a fancier cable.
Although I will admit that the USB slot on the Niki does seem to be "sensitive" - the charger for my bluetooth headphones can charge the Niki, but needs way too much of a shove to get it seated correctly.
i had the same problem with the cable shipped with the device from htc - can only charge up the device but 50% failure rate for establishing activesync connections. i simply brought out the one came with my last motorola handset and it works very nice.
Weird, I actually got a decent quality and quite a thick USB cable with mine...?
me too!! no problem with my usb from htc and even if there was i've got so many of the bloody things from cameras, sat nav and hdd cases that i wouldn't be bothered anyway .Only thing that bugs me is that i have to buy a usb to 3.5mm adapter so that i can use decent headphones cos the supplied ones are rubbish....Oh and the sound level sucks through the speaker( stereo would've been nice).....Oh and the vibrate is rubbish, sometimes i don't even know it's going off and the girlfriends not impressed either....Oh and where's the camera flash...Oh and why do i always find there's apps running that i never even touched......Oh and why is the access time so slow to my minute 2gb storage card, i already filled it with tunes and i have to wait for ages for it get accessed(should i have formatted it first?).....all of that aside i love this phone and wouldn't swap it for anything....well maybe another one with better spec but other than that i wouldn't....................
I've got a tip, if any of you have PS3's (Playstation 3) then you can use the same cable that you use to charge your PS3 wireless controller to connect your HTC Touch Dual/Nike to your PC/laptop.
Is it a proprietary cable? Looks like a variation of mini USB. Need to get some back-ups for the cars and work...
Thanks!
It's a normal micro USB plug, but the plug is slightly recessed into the body of the device, and some cords with fatter ends may not fit well. I found some OEM Samsung cables on Amazon that weren't for the Focus specifically, and have rubbery ends instead of the hard plastic tips like the Focus cord has, but they're the same dimensions and work quite well.
It is proprietary in a way. To charge the phone any micro usb will do however it will not connect to zune nor the pc without the included cable.
Well, looking at Monoprice.com a few days ago, they several different mini-usb cables, some with 4, other with 5 connectors. I ordered 2 of each just to try with various devices I have, hoping some with work with the Focus's as well. Just charging would be fine with the Car, but want PC connection at Home and Work. (though BT works for that as well)
Anyone else? Lets see what we do about getting some inexpensive cables for these phones!
Every micro usb cable i have found (including one i got for 1.98 from amazon and one i got for 6.00 from frys) has worked just fine for all tasks
My cables came in today, this one works just fine. 5 connector mini-usb, soon as I connected to my PC Zune software launched and synched items.
http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10303&cs_id=1030307&p_id=5457&seq=1&format=2
Just over a buck a piece....
I guess I need to get some new cables. Good information.
The cables I got off Amazon for $3/each all work for syncing with the Zune software on my PC, but then, they're OEM, so they should even though they weren't made for the focus specifically. They were a bit shorter than the cable that came packed-in, but my chargers are pretty close to where I put my phone anyway, luckily, so that worked out.
The OEM connector is so short. I always need to connect an extension to comportably use my phone while its charging.
Ok Guys and Gals,
I had a topic going on for a while about windows not detecting my Tablet.
we went round and round about drivers, Novacom, and even formatted my system.
But here what it was My micro usb cable.
My dog had eaten my Hp one. so I bought a generic one through EBAY
I my son took my cable for whatever reason so I grabbed the one that cae with my phone and it fixed everything
So heres my question
what is the right Micro usb cable to buy that will give optimum power abnd data transfer
A micro usb 2.0?
anybody that can help would be great
Any decent microUSB cable will work, its just 4 wires inside linking your Touchpad to your computer. I have used a Motorola, Blackberry, etc branded cables with no issues. Its not uncommon for cheap generic cables to have issues if they shipped with a defect.
Hello World,
I am close to giving up on my brand new Galaxy Tablet - and this after spending a lot(!) of money on the whole setup.
For some weird, bizarre reason Samsung seems to have decided not to allow the PM-900 tablet to charge and use the USB data port at the same time.
Try as I may (and having spend over $50 on all kinds of Y cables and USB hubs by now), I can only use the USB port only for data or for charging, but not both at the same time.
This makes it impossible to work over prolonger periods, as I find myself plugging & unplugging cables all the time (which I sure will do the port mechanics a lot of good along the way, too).
I found a neat trick involving cat'ing some file in /sys/devices/platform/sec-battery/power_supply/battery, but that won't work for me - even so I am rooted and on the latest Cyanogen Mod Kernel for this device.
From the way it looks, there is no pershoot driver for changing the charger settings included in the CM firmware that I flushed, and I can't find any PM900 specific pershoot firmware kernel for the PM-900 either.
W/o the ability to force USB charging on the tablet, I'll have to dump the whole thing, as I am desperately trying to set this up as my laptop replacement.
For the life of me I can't understand who came up with this brain damaged design, but I am using a high power charger which delivers 2A through the cable.
So its not the charger - which I also proofed by charging the unit w/o problems by just disconnecting all other devices (single cable connection).
From the way it looks, the tablet stops charging the moment the current drops even slightly below peak (meaning *any* other device is hooked up on the bus, too).
Those other devices consume very little current (USB microSD card reader, mouse adapter, etc), but its always only a "one way street" (charging or data use, but never both).
I need a solution to this, or this Samsung gets the boot - and this would be the last Samsung tablet I'll ever buy!
Any real help is appreciated.
Update:
I finally found out what's going on.
By switching around Y cables and USB adapters like there is no tomorrow (all bought and paid for with precious ca$h), I could finally narrow down what's happening.
THIS UNIT WILL NOT ACCEPT A CHARGE VIA AN(Y) OTG CABLE !
It'll accept a charge even from the most flimsiest of non-OTG cables, and from the cheapest of USB adapters (as long as its close to a 2A charge current), but stick anything OTG in between and its curtains.
This brain damaged design means that a tablet costing almost twice as much as a budget laptop can not be used for anything other than playing silly Games from the AppStore (now called PlayStore for just that reason?) and to post selfies on Facebook.
Anything even remotely approaching serious work, requiring to hook up peripherals like a USB mouse, keyboard, hard disk a.s.o. is utterly out of the question.
And no, Bluetooth is not always possible with such devices and WiFi setups force me give up my Internet connection.
This is just stupid, and I will now have to *seriously* rethink my entire "laptop-b-gone" approach.
I think Android tablets are just not ready for serious work, and maybe they'll never be much more than playtoys for kids and selfie aids for pimpel faced teenagers.
Off to eBay with this Samsung crap and back to Intel afterwards
Update #2:
By sheer accident I have found that there is ONE HW solution for this ridiculous limitation of "No charging via OTG ":
LAVA SimulCharge USB 1-port OTG Adapter for Samsung Galaxy Tab 4/S/PRO - Model TL-002
The problem is that gimmick may cost u a bundle, depending on where you buy it (at least here in the UK) and since they are the only ones making one, I doubt that's going to change.
WTF is up with that? This would be Samsungs job to offer us a(n affordable) solution like this!
Hi to everyone. Sorry if I will not be brief, but this problem makes me going crazy.
My previous phone died prematurely, so I bought a shiny Oneplus 3T and I'm very satisfied with it. Problem is, that this new piece of technology has an USB-C connector instead of the good old microUSB one.
In my car (Opel) I put an USB extension cable from the Android Auto unit (Intellilink r4.0) to the inside of the center arm, and since now I used that cable to connect my previous phone to the unit. Cable is 1.8 m long (about 5 ft for English people) and worked very well.
Now there goes the trouble: to connect my new OnePlus, I bought a simple microUSB to C adapter... it works very well at home with my PC but... Android Auto unit doesn't recognize the phone.
It says "connect the USB cable". At the same time, phone is charging, so power is connected to it.
Ok, maybe there are inconsistencies with the USB converter, I thought.
So I purchased a USB A to C cable, 1.8 m long (just like my previous normal microUSB one).
No way. Unit insists to not recognize the connection!?
Now, to cut this long thing out... I tried any combination of things, extenders, adapters... the only way to make things work is to use max a 1 m (3,3 ft) long USB A to C cable. No longer than that. Neither with a short extension cable.
But with 1 m I can't reach the center arm! I need at least 1.2/1.4 m (4-4.5 ft) cable lenght.
So, this is it. Who can be the culprit? AA head unit? Or perhaps Oneplus 3T has a "weak" USB?
I wonder if anyone has experienced issues like this... and if there are workarounds. :fingers-crossed:
jonsat said:
Hi to everyone. Sorry if I will not be brief, but this problem makes me going crazy.
My previous phone died prematurely, so I bought a shiny Oneplus 3T and I'm very satisfied with it. Problem is, that this new piece of technology has an USB-C connector instead of the good old microUSB one.
In my car (Opel) I put an USB extension cable from the Android Auto unit (Intellilink r4.0) to the inside of the center arm, and since now I used that cable to connect my previous phone to the unit. Cable is 1.8 m long (about 5 ft for English people) and worked very well.
Now there goes the trouble: to connect my new OnePlus, I bought a simple microUSB to C adapter... it works very well at home with my PC but... Android Auto unit doesn't recognize the phone.
It says "connect the USB cable". At the same time, phone is charging, so power is connected to it.
Ok, maybe there are inconsistencies with the USB converter, I thought.
So I purchased a USB A to C cable, 1.8 m long (just like my previous normal microUSB one).
No way. Unit insists to not recognize the connection!?
Now, to cut this long thing out... I tried any combination of things, extenders, adapters... the only way to make things work is to use max a 1 m (3,3 ft) long USB A to C cable. No longer than that. Neither with a short extension cable.
But with 1 m I can't reach the center arm! I need at least 1.2/1.4 m (4-4.5 ft) cable lenght.
So, this is it. Who can be the culprit? AA head unit? Or perhaps Oneplus 3T has a "weak" USB?
I wonder if anyone has experienced issues like this... and if there are workarounds. :fingers-crossed:
Click to expand...
Click to collapse
Some of the specs for USB-C cables are less than 1m, depending on what the other connection/adapter is. I guess your PC & car outlets are different specs.
See
http://www.cypress.com/knowledge-ba...ngth-cables-usb-type-c-applications-kba204034
Or maybe your cable is not certified so may be more sensitive to outside interference eg from ignition system.
Uhmmm... very interesting information. I'll try to borrow a "certified" cable. Since now, I tried with normal cables (4 different sizes and brand) to no avail (more than 1 m lenght).
Thanks!
jonsat said:
Uhmmm... very interesting information. I'll try to borrow a "certified" cable. Since now, I tried with normal cables (4 different sizes and brand) to no avail (more than 1 m lenght).
Thanks!
Click to expand...
Click to collapse
Check what is the spec of your USB outlets on car and PC, are they different? Then cable may not make any difference to your result.
I'd think that if you have a will known brand cable it would be certified. The "full feature" cables have a chip inside that the device reads, it then sends data etc to that spec. I'm not really up to date with this stuff anymore.....
By the way, my new phone is a Oneplus 3T and I discovered that has many problems with AA in general. And (perhaps) even an USB-C port not completely complying to the standard.
Still, I will try other brands of cables in search of the good one.
Thanks again
Hi,
I had exactly the same issue as you but with the One Plus 3. Had a couple of aftermarket cables (USB - A to C). Sometimes, it connected for about 1-2 minutes but then i had to disconnect and reconnect the cable. Not fun when you are driving.
Also have an Opel (2017 Astra Sports Tourer K) with the Navi900. The only way i found out to solve this issue was to use the original, red cable that comes with the phone. Since i didn't want to lose the Dash charging or, everytime carry the cable with me, i bought a second cable (1,0m) from Oneplus store.
After i did that, i never had disconnections or problems recognizing the phone. 2 weeks driving with various amount of driving time and so far, zero issues.
Also helps if you are using any battery saving apps like greenify or droid optimizer, that you whitelist the android auto app from the auto closing ( i know there's a better name for it).
Hope it helps.
Thanks for your contribution, inccubbus. I think I read a post from you in Oneplus forum, perhaps.
Fact is that 1 mt cable to me is short, I was using 2 mt with my previous phone (LG with microusb port) and no problems at all! Perhaps I may try with the new 1,5 mt red cable from Oneplus store.
But all of this is just ridicolous. Adapters won't work... in example I tried a 20 cm microusb cable with adapter to usb-c and (guess what) no connection!? I start to think that Oneplus is the culprit.
No problem mate. Sorry to hear that you need a longer cable. Before I bought the OnePlus "official" cable, I bought a total of 4 cables from different brands and lengths. 50cm, 1m, 1,8m and 2m. Total of about 60€ to find out that I needed the one cable I already had.
This is borderline ridiculous. Never tried the original because... No fast charge in the car. Duh.
Hope that the official cable works for you. Fingers crossed!
I must add that, even with a short cable, connection drops every now and then with AA freezing.
Another known Oneplus 3T issue...
One thing that occurred to me: do you also have turned on the "automatically connect with Bluetooth" option? I did a test with that option on and the cable connected and, almost like clockwork, every 3-4 minutes I'd lose the connection. Turned that option off and everything came back to"normal".
Did some research and that option is only for cars that don't have a display/Android auto compatibility so the phone screen is the interface.
Sorry if I am writing something that all knew but, in the options doesn't say anything. I was under the impression that I could "cast" the phone to the display without needing the cable. Like Chromecast
@inccubbus, I noticed that issue... but nevertheless I have trouble of disconnections even without checking "automatically connect with BT". However, I have also a BT headset, and if that BT setting is enabled it will disconnects the headset too every few minutes. AA software is very rough.
@jonsat @inccubbus
Just come across this browsing, interesting
https://www.gizmodo.com.au/2016/02/cheap-usb-c-cables-could-kill-your-phone-or-laptop/
Not sure if this will be applicable to anyone else, but just in case. I started to get connection issues between my Nexus 6p and Pioneer stereo via the cable. Tried multiple cables, but all had the same issue to differing degrees. Then realised there was some lint in the phone USB c port, so cleaned it out with a tooth pick. That seems to have fixed it.
Sent from my Nexus 6P using XDA-Developers Legacy app
IronRoo said:
@jonsat @inccubbus
Just come across this browsing, interesting
https://www.gizmodo.com.au/2016/02/cheap-usb-c-cables-could-kill-your-phone-or-laptop/
Click to expand...
Click to collapse
Yes, very interesting although not directly related to topic. Thanks anyway.
Very interesting indeed. Even though the prices of the "aftermarket" cables I purchased were even more expensive than the OnePlus originals, I see what the article mean. Most people think they are just cables but, capacitance, impedance, amperage... All of these things usually are not "copied" from the original and can cause serious damage, since they need to be "universal" and suit different brands/models with different needs.
Thanks for sharing the article! I almost see the link with the issue discussed here.
Btw, I had one random disconnection on Sunday in the final 5 minutes of a 1 hour drive.
Disconnected the cable, reconnected it and, since then, 2 hours of driving with zero disconnections. I really can't find a pattern for these things.
jonsat said:
Hi to everyone. Sorry if I will not be brief, but this problem makes me going crazy.
My previous phone died prematurely, so I bought a shiny Oneplus 3T and I'm very satisfied with it. Problem is, that this new piece of technology has an USB-C connector instead of the good old microUSB one.
In my car (Opel) I put an USB extension cable from the Android Auto unit (Intellilink r4.0) to the inside of the center arm, and since now I used that cable to connect my previous phone to the unit. Cable is 1.8 m long (about 5 ft for English people) and worked very well.
Now there goes the trouble: to connect my new OnePlus, I bought a simple microUSB to C adapter... it works very well at home with my PC but... Android Auto unit doesn't recognize the phone.
It says "connect the USB cable". At the same time, phone is charging, so power is connected to it.
Ok, maybe there are inconsistencies with the USB converter, I thought.
So I purchased a USB A to C cable, 1.8 m long (just like my previous normal microUSB one).
No way. Unit insists to not recognize the connection!?
Now, to cut this long thing out... I tried any combination of things, extenders, adapters... the only way to make things work is to use max a 1 m (3,3 ft) long USB A to C cable. No longer than that. Neither with a short extension cable.
But with 1 m I can't reach the center arm! I need at least 1.2/1.4 m (4-4.5 ft) cable lenght.
So, this is it. Who can be the culprit? AA head unit? Or perhaps Oneplus 3T has a "weak" USB?
I wonder if anyone has experienced issues like this... and if there are workarounds. :fingers-crossed:
Click to expand...
Click to collapse
I don't have a OnePlus 3T, but my phone has a USB C connection (I have a ZTE ZMax Pro) and I haven't had any issues with the connections to AA (other than USB C is harder to plug in and unplug than before). I have a couple different USB C cables - one about 3-5 feet long, and the other about one foot - and both work fine. I'd guess your cables were the culprit. Hope this worked out for you!
EDIT: Oops, didn't read the replies so I see that my post was absolutely non-helpful. Sorry!