Last night i plug charger and this morning i see my phone restarting, goes to red white M logo and restart again. When i plug usb cable in PC the razr stays in black screen . I wait 10-15 min and I unplug cable - the phone starts - everything is fine : battery is 46% ?!? When i put my wall charger RAZR I stuck and restart over and over again; When i plug usb into pc phone freeze.
Please help. Sorry for my English I'm from Bulgaria.
Related
I had Recently received my desktop pc from the repair shop and i plugged it in and wanted to transfer some files..
When i did so my phone's display went off!
I immediately unplugged my phone from the computer and it appeared to be working fine. Afterwards i plugged my phone into the wall charger but there was no light and it did not charge! But once i switched off the phone with the charger plugged in the light next to the port turned on! But it did not charge! I kept it like this for an hour or so but it did not charge! But if i unplug it and put it back in when it is off... It switches on but does not charge! Right now the battery is completely drained and is not accepting any charge..
I believe this is because of some current overload in the front ports of the desktop. I tried to plug in my PSP to it through the same ports and it too shut down but is still functioning...
I am running Ultimate ICS 1.0
If you dare to you could try supplying the voltage directly to the battery contacts.
Grab an old USB Cable - get rid of the plug that doesn't fit in your charger and stuff the red (+) and black (-) wire in between the battery and the connector.
DO IT AT YOUR OWN RISK!!!
Hello, I've got problem with my wife's galaxy s advance.
The phone has a latest stock rom, i don't know which one. (chacked in phone for updates like 2 weeks ago and it said that there were none). It was unlocked.
The phone was never flashed or rooted.
It was left with a charger plugged in yesterday for the whole night.
When we wake up, the phone was off.
Now if you plug in the charger it vibrates shortly after three seconds, no light no nothing.
If you press power it also vibrate shortly - nothing more happnes.
I tried to go to download mode or rcovery - nothing.
Tried to plug in to a pc using USB but it is the same...
Any ideas?
Is it only the battery or is the phone dead?
I got some progres
I plugged the phone to my pc with a diffrent cable, there is a plug in and plug out windows sound, the battery indicator shows up for like 5s, it is very low and the pattern starts all over again, i'll just leave it like this and see what happens
Maybe your wall charger is broken, try another one
AntaresOne - of course, I tried like 5 of them...
the phone reacts only in the pc, fter couple of minutes is still doing the "charge loop"
I've checked the USB in my pc and it's the "always on" one, maybe it provides more Ampers?
After an hour or so it stopped "charge looping" and started to just charge
Now is 28% and everything's back to normal.
Case closed
Hi. I have a very strange problem with my XSP running Vanir. I've been using Vanir for over 2 months now.
The problem is that the phone wouldn't charge, at all. When it was powered on, plugging in the cable through either wall socket/pc would do nothing. PC didn't even recognize the phone.
Currently, the battery is completely drained and there's no way to power it on. When I connect the phone to wall socket, the LED first turns green for about 5 seconds. Then, Sony logo is flashed with LED being red, for 5 seconds again. Then, the offline charging screen would appear, and go off within a couple of seconds. When I press the power button, the offline charging screen flashes and goes off. LED isn't blinking or lit up.
If I connect the phone to PC, the LED glows red constantly. That's it, no charging.
The problem is not with the cable as I tried 3 different ones.
Someone help, please.
May be the micro usb socket is damaged.
http://forum.xda-developers.com/xperia-sp/help/phone-wont-charge-t2846801
try it
Recently whenever I put my 2013 Moto X (XT1052) on charge using wall power. My phone turns on and shows the battery with the % charged and after a few seconds it restarts to the same screen. I am using the Motorola USB cable and wall plug that was provided, and it hasn't happened before.
Does anyone know how to stop my phone from restarting, or why it is doing it?
I think I bricked my device. I previously had a custom ROM with Android 5.1.1. My phone is unlocked bootloader and rooted.
I was playing YouTube videos last night and fell asleep, but I didn't realize my phone was on the whole time so the battery died on me. I charged the battery for about 2 minutes to try turning the phone on, but it flashed red LED. I got impatient and did this...
1. As it was displaying battery, I unplugged my phone from my battery charger.
2. As it was shutting down (from pulling the charging cable out), I did a hard reset (hold vol up)
3. As it vibrated 3 times, I plugged the charger in.
After I did that, my phone won't boot, no LED, nothing. My battery can't charge it (turns on for about a second and then it stops. I charged it with AC for 30 mins. and no life. Pressed the red button on the SIM but did nothing, tried turning on the phone normally but nope.
Should I open the back?
EDIT: Finally on the computer, the LED turns on but it's red (stays on without pulsing).
Flashtool detects device
Code:
08/007/2015 16:07:58 - INFO - Device connected with USB debugging off
08/007/2015 16:07:58 - INFO - For 2011 devices line, be sure you are not in MTP mode
but I can't get into flashmode or bootloader. Screen is off. I'm not sure what to do anymore...:crying:
kentexcitebot said:
I think I bricked my device. I previously had a custom ROM with Android 5.1.1. My phone is unlocked bootloader and rooted.
I was playing YouTube videos last night and fell asleep, but I didn't realize my phone was on the whole time so the battery died on me. I charged the battery for about 2 minutes to try turning the phone on, but it flashed red LED. I got impatient and did this...
1. As it was displaying battery, I unplugged my phone from my battery charger.
2. As it was shutting down (from pulling the charging cable out), I did a hard reset (hold vol up)
3. As it vibrated 3 times, I plugged the charger in.
After I did that, my phone won't boot, no LED, nothing. My battery can't charge it (turns on for about a second and then it stops. I charged it with AC for 30 mins. and no life. Pressed the red button on the SIM but did nothing, tried turning on the phone normally but nope.
Should I open the back?
EDIT: Finally on the computer, the LED turns on but it's red (stays on without pulsing).
Flashtool detects device
Code:
08/007/2015 16:07:58 - INFO - Device connected with USB debugging off
08/007/2015 16:07:58 - INFO - For 2011 devices line, be sure you are not in MTP mode
but I can't get into flashmode or bootloader. Screen is off. I'm not sure what to do anymore...:crying:
Click to expand...
Click to collapse
Don't open the back cover just yet yet, it seems that you have a dead battery (fully discharged) so I'd suggest you to connect MicroUSB and magnetic charger together at the same time to force-charge the battery.
If you don't have a magnetic charger, and have a dock then all you have to do is pull it apart and you will find yourself a free magnetic charger in there.
Good luck!
Regards,
~J2C
No. Just leave it charged for 30 mins even with no les light, after 30 mins the red light will light up. U drained your battery thats why it wont turn on