Hi guys, I have this terrible problem with my phone, I just flash Omar's rom and the phone is bricked.
It doesn't turn on, but you can press the power button and the phone starts, but it doesn't pass the unlocked motorola logo.
If you press power+vol down the phone goes to recovery, but it's imposible to turn on.
I try to use fastboot from the homemade fastboot thread, but don't do anything.
Anyone can helpme?
Flash an JB Fastboot with RSD Lite 6.1.4
You'll find an list of all available JB Fastboot Files, when you follow the Link in my Signature. Also you'll find RSD and the necessary drivers.
Gesendet von meinem XT890 mit Tapatalk 2
---------- Post added at 01:44 PM ---------- Previous post was at 01:43 PM ----------
BTW: Next time backup your current Rom before you start flashing anything
Gesendet von meinem XT890 mit Tapatalk 2
Thank you so so much, my phone is working again, you are the best!
Related
(Hello! This is my first time posting in xda.)
Recently I got a razr i and I love that except that I can't use OTA to update to JB.
I decided to use RSD to flash a JB rom and everything seems fine.
But I discovered that I can't use the vol down + power button to get into fastboot mode anymore.
The phone will just skip the fastboot and boot normally.
I tried other button combinations but none of them works.
I can enter fastboot mode only using [adb reboot recovery] with USB debug mode on.
I wonder if anyone encountered this problem and is there any solution?
Thank you very much!
http://forum.xda-developers.com/showthread.php?p=39915249
Gesendet von meinem XT890
Hello all,
i've got a big problem:
<long story..>
I tried to get my KFHD in Fastbootmode with "idme bootmode 4002" but won't worked after reboot.
In another forum, they said »use "idme bootmode 5000"« (now i know: no good idea).
Now i know that bootmode 5000 is recovery.
If i power on the kindle:
1) "kindle fire" (yellow white) logo appers
2) "fastboot kindle fire" logo appers for ~2-3 seconds
3) blackscreen for ever...
How can i get out?
Factory cable won't work
I don't find the usb-boot points.
Can i get out with usb-boot? If yes, can anyone show me where they are?
All hardware is orginal, i haven't modified anything, but i already opened the back cover.
Please help!
Sorry for my bad english, hope its good enough for XDA.
And i hope i've posted in the correct section, and it's a question..
Greetings from germany
TheXorg
TheXorg said:
Hello all,
i've got a big problem:
<long story..>
I tried to get my KFHD in Fastbootmode with "idme bootmode 4002" but won't worked after reboot.
In another forum, they said »use "idme bootmode 5000"« (now i know: no good idea).
Now i know that bootmode 5000 is recovery.
If i power on the kindle:
1) "kindle fire" (yellow white) logo appers
2) "fastboot kindle fire" logo appers for ~2-3 seconds
3) blackscreen for ever...
How can i get out?
Factory cable won't work
I don't find the usb-boot points.
Can i get out with usb-boot? If yes, can anyone show me where they are?
All hardware is orginal, i haven't modified anything, but i already opened the back cover.
Please help!
Sorry for my bad english, hope its good enough for XDA.
And i hope i've posted in the correct section, and it's a question..
Greetings from germany
TheXorg
Click to expand...
Click to collapse
If you still have access to fastboot...
Code:
fastboot -i 0x1949 idme bootmode 1
@soupmagnet
no, i havent. Its always booting recovery. :thumbup:
Send from my LGE610 CM 10.1
Gesendet von meinem LGE610 CM 10.1
TheXorg said:
@soupmagnet
no, i havent. Its always booting recovery. :thumbup:
Send from my LGE610 CM 10.1
Gesendet von meinem LGE610 CM 10.1
Click to expand...
Click to collapse
Turn the device completely off, unplug it, enter the command, then plug it back in.
TheXorg said:
Hello all,
i've got a big problem:
<long story..>
I tried to get my KFHD in Fastbootmode with "idme bootmode 4002" but won't worked after reboot.
In another forum, they said »use "idme bootmode 5000"« (now i know: no good idea).
Now i know that bootmode 5000 is recovery.
If i power on the kindle:
1) "kindle fire" (yellow white) logo appers
2) "fastboot kindle fire" logo appers for ~2-3 seconds
3) blackscreen for ever...
How can i get out?
Factory cable won't work
I don't find the usb-boot points.
Can i get out with usb-boot? If yes, can anyone show me where they are?
All hardware is orginal, i haven't modified anything, but i already opened the back cover.
Please help!
Sorry for my bad english, hope its good enough for XDA.
And i hope i've posted in the correct section, and it's a question..
Greetings from germany
TheXorg
Click to expand...
Click to collapse
Can you confirm that you have the correct drivers installed on your pc ?
sent fro my rooted kindle fire hd 7 with twerp and kinology rom installed
@itouchables
Yes, windows has a *device pluggenld in - device plugged out* loop, linux gives me an error on tty1 and sometimes has a *texas instruments* device in lsusb
Send from my LGE610 CM 10.1
Gesendet von meinem LGE610 CM 10.1
Did you try to do what soupmagnet suggested by entering the command on the pc, the rebooting the kindle then plugging it in (in hopes to issue the command during the couple of seconds before.it leaves fastboot)
sent fro my rooted kindle fire hd 7 with twerp and kinology rom installed
Yes, i tried with linux, but:
No sorry, its too short.
Linux is *spamming* the following error:
[ XXX.XXXXXX] usb 1-1: >unable to get BOS descriptor
Is Windows faster with fastboot?
Send from my LGE610 CM 10.1
Gesendet von meinem LGE610 CM 10.1
From my experience Linux is always faster than windows. Especially when dealing with a device being plugged in, it will recognize and load up its module way faster them windows ever does for me. Also, that error may be related to you using a USB 3.0 port, don't use 3.0, use a 2.0 port.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
I'm using a Eeepc 1015P, its only got USB 2.0...
Send from my LGE610 CM 10.1
Gesendet von meinem LGE610 CM 10.1
TheXorg said:
Yes, i tried with linux, but:
No sorry, its too short.
Linux is *spamming* the following error:
[ XXX.XXXXXX] usb 1-1: >unable to get BOS descriptor
Is Windows faster with fastboot?
Send from my LGE610 CM 10.1
Gesendet von meinem LGE610 CM 10.1
Click to expand...
Click to collapse
Are you running your fastboot commands as root?
i can still run fasboot commands using a usb 3 port, so thats mostly likely not the problem....
@soup
Nope. Does it matter?
@itouchables
havent got a pc with usb 3.0
Send from my LGE610 CM 10.1
Gesendet von meinem LGE610 CM 10.1
TheXorg said:
@soup
Nope. Does it matter?
Click to expand...
Click to collapse
Unless you have the proper udev rules set up, it absolutely matters.
soupmagnet said:
Unless you have the proper udev rules set up, it absolutely matters.
Click to expand...
Click to collapse
Soupmagnet, isn't it always by default in root ?...for some reason..my is
It would ask for root password, if its always starting as root. Say if i am wrong
Send from my LGE610 CM 10.1
Gesendet von meinem LGE610 CM 10.1
itouchables said:
Soupmagnet, isn't it always by default in root ?...for some reason..my is
Click to expand...
Click to collapse
No distros (if any at all) will not log you in automatically as the root user by default. It is a huge security risk, and logging in as the root user should be avoided whenever possible. There are commands like 'sudo' and 'su' which can give a normal user elevated privileges when needed.
Yes yes, i know. Im not a linux noob... But you can disable password question in sudo with visudo.... But not more here in this thread
Btw i use Mint, any tips with fastboot or the error spamming?
Send from my LGE610 CM 10.1
Gesendet von meinem LGE610 CM 10.1
soupmagnet said:
No distros (if any at all) will not log you in automatically as the root user by default. It is a huge security risk, and logging in as the root user should be avoided whenever possible. There are commands like 'sudo' and 'su' which can give a normal user elevated privileges when needed.
Click to expand...
Click to collapse
starnge, my ubuntu workstation at home always hast the # sign at the prompt....you are right i should use sudo su to gain admin privileges......wonder what i did to cause this permanent root on my workstation..............
---------- Post added at 01:41 PM ---------- Previous post was at 01:38 PM ----------
TheXorg said:
Yes yes, i know. Im not a linux noob... But you can disable password question in sudo with visudo.... But not more here in this thread
Btw i use Mint, any tips with fastboot or the error spamming?
Send from my LGE610 CM 10.1
Gesendet von meinem LGE610 CM 10.1
Click to expand...
Click to collapse
yeah lets not go of topic... btw is your pc 64 bit or 32 bit...and if so, which ver of the distro did you install.
itouchables said:
starnge, my ubuntu workstation at home always hast the # sign at the prompt....you are right i should use sudo su to gain admin privileges......wonder what i did to cause this permanent root on my workstation..............
Click to expand...
Click to collapse
If i remember right, maybe youre member of the group adm or something like this. Then your user is like root.
Send from my LGE610 CM 10.1
Gesendet von meinem LGE610 CM 10.1
I tried flashing the d415 version of CM11 and now the phone will not turn on... I can't boot into recovery mode and when I connect it to the computer it says that the device is unknown...
Someone please help
mccorkendale said:
I tried flashing the d415 version of CM11 and now the phone will not turn on... I can't boot into recovery mode and when I connect it to the computer it says that the device is unknown...
Someone please help
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
gdjindal said:
http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
Click to expand...
Click to collapse
Thank you so much i wasn't sure if this would work or not but i have a problem... I try generating the kdz using my imei and i get a blank white page... Could you or someone else please generate it for me?
mccorkendale said:
Thank you so much i wasn't sure if this would work or not but i have a problem... I try generating the kdz using my imei and i get a blank white page... Could you or someone else please generate it for me?
Click to expand...
Click to collapse
Right click on the page and select "View source".
Sent from my LG-D415 using Tapatalk
---------- Post added at 09:41 PM ---------- Previous post was at 09:38 PM ----------
mccorkendale said:
I tried flashing the d415 version of CM11 and now the phone will not turn on... I can't boot into recovery mode and when I connect it to the computer it says that the device is unknown...
Someone please help
Click to expand...
Click to collapse
Now my question is, what did you do or not do for this to happen?
Sent from my LG-D415 using Tapatalk
shinobisoft said:
Right click on the page and select "View source".
Sent from my LG-D415 using Tapatalk
---------- Post added at 09:41 PM ---------- Previous post was at 09:38 PM ----------
Now my question is, what did you do or not do for this to happen?
Sent from my LG-D415 using Tapatalk
Click to expand...
Click to collapse
I tried flashing CM11 and some how messed it up im not even sure what I did wrong
I am having same issue, phone will not turn on at all, can't enter download/fastboot. Can't enter recovery via fastboot. Pretty frustrating.
md1008 said:
I am having same issue, phone will not turn on at all, can't enter download/fastboot. Can't enter recovery via fastboot. Pretty frustrating.
Click to expand...
Click to collapse
Does fastboot detect your device? If so, copy a recovery to the folder where your fastboot executable is. Open a command prompt in that folder. Boot device to fastboot mode. In command window type "fastboot boot recovery.img", without the quotes and where 'recovery.img' is the file name of the recovery you want to use.
This will boot your device to the specified recovery without needing button combos.
Sent from my LG-D415 using Tapatalk
Whenever I try to put my xsp on fastboot den the blue lite gets off after few seconds
rsmarty said:
Whenever I try to put my xsp on fastboot den the blue lite gets off after few seconds
Click to expand...
Click to collapse
Don't put phone in fastboot before flashtool asks you to do so. Else, the phone waits for a connection, doesn't find one and turns off.
Gesendet von meinem
Sony Xperia SP - Cyanogenmod 12.1
Well, first of all, sorry for my bad english, I'll try to explain what is happening right now.
I had TWRP installed and latest version of Oxygen OS. Phone was going slowly lately so I thinked that locking bootloader and wiping all my data could optimize my phone. Ok.
Did one of the few things I know how to do, adb devices, adb reboot bootloader, fastboot oem lock and everything OK. When I rebooted, I rebooted into recovery mode, and recovery mode wouldn't work.
I don't know why... So I proceed to boot as usual and do as nothing happened... Then something strange happened. To decrypt data and boot Android, I was requiring an alpha-numerical password when I NEVER had
one of these in my OP3T... So... I tried to do something, but I can't do anything. I don't have recovery, I can't go in bootloader mode, I can't start Android. Oficially I couldn't do anything.
So, I attempted fake passwords (I also tried all the passwords I've entered at some point in my phone but anything) till the alert of wiping data would start. When that happened, the next text appeared in the screen:
Decryption unsuccesful
The password you entered is correct, but
unfortunately your data is corrupt.
To resume using your phone, you need to
perform a factory reset. When you set up your
phone after the reset, you'll have an opportunity
to restore any data that was backed up to
your Google Account.
Click to expand...
Click to collapse
What can I do? When this screan appears and I plug the phone into my PC only detects the drivers installer. Nothing else.
Thanks for the help and sorry for my english and bad explanation.
Check out this https://forums.oneplus.com/threads/...-3-3t-and-go-back-completely-to-stock.456232/
And do exactly written on the forum i guess it will fix your problem use latest official recovery and oxygen os from OnePlus website
Note it will completely wipe out your device!
Sent from my [device_name] using XDA-Developers Legacy app
---------- Post added at 11:43 AM ---------- Previous post was at 11:38 AM ----------
Does fastboot works in your device??
Sent from my [device_name] using XDA-Developers Legacy app
---------- Post added at 11:50 AM ---------- Previous post was at 11:43 AM ----------
If nothing works then i think your device is bricked try this guide to unbrick your device
https://forums.oneplus.com/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/
Sent from my [device_name] using XDA-Developers Legacy app
munny_sun said:
Check out this
And do exactly written on the forum i guess it will fix your problem use latest official recovery and oxygen os from OnePlus website
Note it will completely wipe out your device!
Sent from my [device_name] using
---------- Post added at 11:43 AM ---------- Previous post was at 11:38 AM ----------
Does fastboot works in your device??
Sent from my [device_name] using ]
---------- Post added at 11:50 AM ---------- Previous post was at 11:43 AM ----------
If nothing works then i think your device is bricked try this guide to unbrick your device
Sent from my [device_name] using
Click to expand...
Click to collapse
Fastboot works, yes. But oem is locked so... Also, I can't follow the tutorials. First one assums that oem is unlocked and second one doesn't work, my phone isn't bricked.
Serdito said:
Fastboot works, yes. But oem is locked so... Also, I can't follow the tutorials. First one assums that oem is unlocked and second one doesn't work, my phone isn't bricked.
Click to expand...
Click to collapse
Can you unlock the bootloader again?
Sent from my [device_name] using XDA-Developers Legacy app
---------- Post added at 12:57 PM ---------- Previous post was at 12:55 PM ----------
Serdito said:
Fastboot works, yes. But oem is locked so... Also, I can't follow the tutorials. First one assums that oem is unlocked and second one doesn't work, my phone isn't bricked.
Click to expand...
Click to collapse
Can you unlock the bootloader again?
If you're fastboot works then you're device can recover for sure why dont you try to flash twrp recovery through fastboot.
Sent from my [device_name] using XDA-Developers Legacy app
---------- Post added at 12:58 PM ---------- Previous post was at 12:57 PM ----------
Serdito said:
Fastboot works, yes. But oem is locked so... Also, I can't follow the tutorials. First one assums that oem is unlocked and second one doesn't work, my phone isn't bricked.
Click to expand...
Click to collapse
Can you unlock the bootloader again?
If you're fastboot works then you're device can recover for sure why dont you try to flash official revovery through fastboot
Sent from my [device_name] using XDA-Developers Legacy app
---------- Post added at 01:04 PM ---------- Previous post was at 12:58 PM ----------
Or you can format data from fastboot by this command before flashing recovery
fastboot format userdata
Sent from my [device_name] using XDA-Developers Legacy app
No, I can't unlock bootloader... I've also tried fastboot clear userdata but I can't.
The only way you can recover your phone is to use an unbrick guide, because indeed, your phone IS bricked.
Unlocking the bootloader won't work at this point, because OEM unlocking has to be enabled first in order to be able to unlock via fastboot.
Next time don't lock the bootloader if you're running anything other than stock (ROM, recovery, kernel).
P.S. you probably won't be able to recover your data either
Serdito said:
No, I can't unlock bootloader... I've also tried fastboot clear userdata but I can't.
Click to expand...
Click to collapse
Your problem is that somehow your bootloader is locked if it wasn't it can easily solved by twrp.
I think you're device is in brick state now.
Sent from my [device_name] using XDA-Developers Legacy app
przemcio510 said:
The only way you can recover your phone is to use an unbrick guide, because indeed, your phone IS bricked.
Unlocking the bootloader won't work at this point, because OEM unlocking has to be enabled first in order to be able to unlock via fastboot.
Next time don't lock the bootloader if you're running anything other than stock (ROM, recovery, kernel).
P.S. you probably won't be able to recover your data either
Click to expand...
Click to collapse
Hmmmmmmmm ok, I'll try it. Thanks!
Serdito said:
Hmmmmmmmm ok, I'll try it. Thanks!
Click to expand...
Click to collapse
See if this forum can help you, https://forum.xda-developers.com/showthread.php?t=3404708
He has the same problem like you.
Sent from my [device_name] using XDA-Developers Legacy app