Database Develop

Terra Term

I have downloaded Terra Term to backup my MDA to SD card but I dont see any USB option to connect and I have used mtty.exe and with that when I use USB connection and hit ok it get an error message saying that " USB port can not open" can anyone help me dowloading the correct version or suggest me what to do.

RUUwrapper

Hello, I can't get RUUwrapper to work, I always get a error message (see attchement) sometimes it error 202 or 246. USB connection is working I used cheetahunlocker and that worked at least the first part. I also did the USB driver update that was mentioned in some forum if you had USB connection problems with Vista.
Any ideas how to proceed? Can I just upload the 6.1 update to my SD card?
Please advise
Peder

use the SDcard update method... it's faster and safer...
But that's just my opinion...

I just did the SD update and it was working great,
Thxs

HTC Sync for Magic?

is it available?

VarioIII said:
is it available?
Click to expand...
Click to collapse
How to get HTC Sync working

I NEED HTC Sync Software for my PHONE, not my PC

it is possible. i opened a thread few days ago.
I got the files from other ROMs.
Install them in your phone like you install apps
Wait for a while or restatr your phone.
and you need Sync for your PC.
here is the files you need.

doesnt work with APPSInstaller. How do i install it?

Try using command prompt
you must have Sdk tools on your pc
so it can read your phone
go to the directory were this 2 files located unzip them .
easiest way just put them on C: or on D:
than open commad promt from your PC i thik you know what it is
check first does it read your phone type
"adb devices"
it should show you your drvices serial number. if it ok.
type
"adb install sync.apk"
it will install the first file
"adb install pcsii.apk"
it will instal your second file.. and everything will be ok

Thanks, I was looking for this as well.

Just flash my Magic to hofo v1.1.1. Need to sync with PC, thanks for the file.

Doesn't work for my Vodafone Magic
When i plug my usb cable in it says: "Sorry! The application PC Synchronization (process com.htc.android.psclient) has stopped unexpectedly. Please try again.
I'm running Cyanogen 4.0.4
Any ideas?

I'm also looking for a solution to this problem - plenty of rom cookers remove the sync software, but I've yet to find anyone that can tell me how to FIX it.
Like the previous poster, when I install the three required files (sync.apk, pcscii.apk and pcscii.odex), I get the error mentioned. Surely someone has a way to fix this?

Merlinux said:
Doesn't work for my Vodafone Magic
When i plug my usb cable in it says: "Sorry! The application PC Synchronization (process com.htc.android.psclient) has stopped unexpectedly. Please try again.
Click to expand...
Click to collapse
Right. Doesn't work either on a Vodafone Magic with org. ROM same error. You're only able to sync with google apps.

its honestly not worth it

Push Sync software to Sapphire 32A
Hello,
To proceed with RUU from the carrier, the HTC sync connection needs to be estabilished, am I right?
In order to do this, I used the files from the previous poster ruslanriad.
However, It unexpectedly crashes, no matter if I use fastboot install mode or .apk installation through the file browser.
How can I get it up and running?
I'm using Magic Orange 32A with 1.33.2010 HBOOT and 6.35 radio. Current ROM is FroyoRider_Switch_6.35_34_v1.0.

flashing hard spl

im trying to do the hard spl on my phone but i cant open because of my antivirus on my comp no idea how to turn it off
it keeps saying security risk bloodhound
im have windows vistaa

hi,
have you read the instructions in the hardspl thread?
if not, check instruction number 4:
4) run Rhodium-HardSPL_V1_20R2.exe on PC, make sure it's launched from a local drive (not through network drive, etc.). XP requires Admin logon, and Vista/Windows 7 will automatically prompt to allow it to run in Admin mode, allow it please. if you get an antivirus warning, please ignore it, it contains no harmful code (just used a packer to compress it).
Click to expand...
Click to collapse

cwee477 said:
im trying to do the hard spl on my phone but i cant open because of my antivirus on my comp no idea how to turn it off
it keeps saying security risk bloodhound
im have windows vistaa
Click to expand...
Click to collapse
What AV version are you using. In Symantec you can specify an exception folder and run from there.

flash tells me it isn't a BA, when I know it is

I have definitely got the blue angel. It is an O2 Xda 11s.
I have downloaded the how to flash your BA pdf by D-Two, and followed the instructions. It gets through to the stage where it's about load the software onto the phone, and then it quits saying that he phone is not the appropriate model.
device information
Operator version: PDAViet.net
ROM version: 6.01.10 VH
ROM date: 07/08/08
Radio version: 1.06.00
ExtROM: diamond (01)
RAM size: 128 MB
Flashing eyes: 32 MB
Storage size: 60.3 MB
At present I have windows mobile 6.1.
And suggestions please?

for upgrading, you use the MAupgradeut_noID.
that program avoids country id errors but it was originally made for the magician, hence MA, whereas the original BA upgrade utility is called BAupgradeut.
that is why you get that error. you have to put the device into bootloader mode before connecting it to the pc and before starting maupgradeut_noid, that way, you avoid the device id check.
make sure to follow the correct upgrade procedure, found here: http://forum.xda-developers.com/showthread.php?t=630416

These are the instructions I used;
Temporarily remove your SD Card (it may work for you with the SD card still in your BA, but you may not be able to enter USB mode when cradled).
Put your device into Bootloader mode by pressing and holding the "Power" & "Record" buttons, and then press the Reset Button. Help me with this step
Connect the phone to the sync cable/cradle. sarcasm ahead Note: Did you see a sign out in front of this point that said: "You can flash using BlueTooth connection?" You know why you didn't see that sign? Because you can NOT FLASH using BlueTooth!
Now you can execute the installer file. (something like "MaUpgradeUt_noID")<--------------- Used This
Here is the screen just before boarding the software.
http://i627.photobucket.com/albums/tt356/Pterodactyl_2012/ba1.png
And here is the error message.
http://i627.photobucket.com/albums/tt356/Pterodactyl_2012/ba2.png

nope, you are not using the proper maupgradeut_noid, because that would show a magician on the left, whereas your pictures clearly show a BA, so download the Chef_Tony RUU from my signature and try that. it has the right maupgradeut_noid, that will avoid errors like that.

Chef_Tony said:
nope, you are not using the proper maupgradeut_noid, because that would show a magician on the left, whereas your pictures clearly show a BA, so download the Chef_Tony RUU from my signature and try that. it has the right maupgradeut_noid, that will avoid errors like that.
Click to expand...
Click to collapse
yep, you were right,,,,,,, BUT same error message;
http://i627.photobucket.com/albums/tt356/Pterodactyl_2012/xda4.png

you are trying to flash using vista/7 have you read d-two's manual about that, with the customized driver and everything?
alternatively try a windows xp pc and follow the tutorial in my signature (the read first link)
and make sure, that you don't copy around the rom too much. download the rom and the ruu directly to the pc you flash from and use it from that folder directly. i use windows 7 on my main pc and can only flash from my netbook which runs windows xp, and due to too much copying, i had similar errors, because after copying the rom to a usb flash drive without problems, still the crc changed.
don't worry, your case is far from hopeless, but you seem to be unlucky and go through every problem there is

Chef_Tony said:
you are trying to flash using vista/7 have you read d-two's manual about that, with the customized driver and everything?
alternatively try a windows xp pc and follow the tutorial in my signature (the read first link)
and make sure, that you don't copy around the rom too much. download the rom and the ruu directly to the pc you flash from and use it from that folder directly. i use windows 7 on my main pc and can only flash from my netbook which runs windows xp, and due to too much copying, i had similar errors, because after copying the rom to a usb flash drive without problems, still the crc changed.
don't worry, your case is far from hopeless, but you seem to be unlucky and go through every problem there is
Click to expand...
Click to collapse
Okay yes, I should have said this. I am using windows seven on a Lenovo N500 4233 32g. The problem is, trying to get hold of an XP machine. Have you tried running this programme in compatibility mode? I will have a look at your instructions and see where I get to.
Thanks for your help,

Is d-two's manual, the HTC service manual in you sig?

no, it is to be found here: http://forum.xda-developers.com/showpost.php?p=5456317&postcount=6
compatibility has nothing to do with it, neither has the xp mode or any virtual machine, because there must be suitable windows 7 drivers present. but i cannot help you with his tutorial, since i use windows xp for flashing and have never successfully used windows 7 for flashing.
the htc service manual in my sig is the official htc manual for hardware repairs, you can learn to disassemble the device there and have a list of spare parts