Hey guys
I have a Tilt and recently installed BTA so that I could channel music to my earpiece. I didnt like the sound quality so I uninstalled it. No I cant pair my bluetooth anymore. The two messages I always get is Problem with hardware, and bluetooth radio is turned off. I tried to pair a brand new bluetooth today, still no success. Perhaps one of my registry settings were changed. Please help.
if you uninstalled the program properly then there shouldnt be any problems. Go into your bluetooth app and make sure the b/t is turnt on and visible then going to the devices section you should be able to ad new device and if it is an earpiece should show a h/set next to it.
Hey all,
I've searched on Google & xda-developers forum for a while, but couldn't find anything on this. I've got an EGO Look carkit (http://www.egohandsfree.com/ego-look.html). This carkit has the ability to read messages from a phone over bluetooth, at least that what's stated in the specs of the carkit. I also see this option in the menu of the carkit, but its disabled. This leads me to the conclusion that the carkit thinks that my phone doesn't have the right bluetooth-options. I also tried it with a Samsung D600 & Samsung D900, but that didn't show the messages-option enabled either.
I updated the carkit to the most recent firmware, and am running RomeOS V3.1 (http://forum.xda-developers.com/showthread.php?t=406346) on radio 1.65.24.35. I have enabled Remote SIM Access in the bluetooth settings, but to no avail.
Is there anybody that has had a similar problem/feature in their carkit, that have this feature working? If not, can anybody tell me what bluetooth-profile is needed for this functionality?
Thanks in advance,
hawkeye
I just recently bought a new stereo bluetooth headset (dell BH200) which sounds great when I play music through it, but it comes with a gigantic flaw. I can't make or recieve calls. The moment any of that happens, the headset disconnects itself. I'm wondering what the problem is since the headset does support 2.0 with EDR and so does the fuze. One thing I did noticed though was that when I paired the headset, it did not ask for a passkey at all and just went straight to "save".
I'm wondering if there is anything that I can do to make the headset work with phone if anyone has any idea. I was lurking around and someone mentioned something about CoD (class of device) but I dont think that's the issue.
Thankyou for your time reading this post.
mputtr said:
I just recently bought a new stereo bluetooth headset (dell BH200) which sounds great when I play music through it, but it comes with a gigantic flaw. I can't make or recieve calls. The moment any of that happens, the headset disconnects itself. I'm wondering what the problem is since the headset does support 2.0 with EDR and so does the fuze. One thing I did noticed though was that when I paired the headset, it did not ask for a passkey at all and just went straight to "save".
I'm wondering if there is anything that I can do to make the headset work with phone if anyone has any idea. I was lurking around and someone mentioned something about CoD (class of device) but I dont think that's the issue.
Thankyou for your time reading this post.
Click to expand...
Click to collapse
mmm me thinks that it may not have paired correctly. I don't actually know much about the model you have. I have a Iclip R32 which I have had paired with most of my phones. It always asks for the passkey. I have always, once paired, made a call to my phone while the headset is connected. Not sure if it is related to my device or not but if I do not do this it will do weird things when I listen to music and receive calls. Sorry if this has not been of much help to you.
Bottom line: I would delete the pairing and do it again.
if you're not sure which bt headset it is, it's up on the dell website. Let me snag a link for you real quick. The problem is it only does half the function i want it to which is aggravating.
Here you go:
http://accessories.us.dell.com/sna/...etail.aspx?c=us&l=en&s=dhs&cs=19&sku=313-6220
that's the headset I got. The thing that strikes me as odd is that I couldn't enter a passkey nor is there an option for me to force to provide a passkey like vista. I heard rumors about the bluetooth stack automatically assuming passkeys for "unsafe" devices like headsets and all that. If anything should I consider getting a different bt stack? People were recomending Widdcomm's...
mputtr said:
if you're not sure which bt headset it is, it's up on the dell website. Let me snag a link for you real quick. The problem is it only does half the function i want it to which is aggravating.
Here you go:
http://accessories.us.dell.com/sna/...etail.aspx?c=us&l=en&s=dhs&cs=19&sku=313-6220
that's the headset I got. The thing that strikes me as odd is that I couldn't enter a passkey nor is there an option for me to force to provide a passkey like vista. I heard rumors about the bluetooth stack automatically assuming passkeys for "unsafe" devices like headsets and all that. If anything should I consider getting a different bt stack? People were recomending Widdcomm's...
Click to expand...
Click to collapse
Mm I checked them with the link you sent thanks for that.
Maybe my headset is getting old but it always asks for a passkey when I connect it. My Touch Pro did just like my Kaiser and Hermes. Sorry but maybe you will need to check with Dell. They do not mention any thing but I'm assuming that they have a microphone for phone calls....
edit: Doh I just read the 2nd page of reviews and it does have a mic. Sorry should of checked that before.
Well since your touch pro most probably runs wm6.1, i doubt it's because your headset is old. I wonder if there's a way to disable this automatic passkey guessing thing.
Anyone? any ideas on how to disable the automatic pin number guessing feature of wm6.1?
Kicks post up to page 1
So what do you guys think?
Would it be a good idea to use a different bt stack or am I stuck with no choice at all?
Need Help Badly!!
hi i'm trying to pair my bluetooth headset (Samsung WEP200) but everytime i put the pin number (that is given by the bluetooth headset) it always said "Your Device did not connect with Samsung WEP200. The connection Failed or the passcode is incorrect".
how to install the hotfix (the hot fix from HTC website) on my HTC Touch Pro? everytime i copy the .exe file into my device, and run it, i always got an error box. Incorrect Device, "Please use the correct Device to Install This Hotfix program!" i don't know how it happen, i download this from HTC support page. i select the phone (HTC Touch Pro) and in the "Software Download" tab it show that there are 3 available download, the Hotfix, the Rom and Application.
i really need help....... pls, someone that have the same proble with their HTC Touch Pro bluetooth connection.....
is there a way to disable the automatic passkey mode that came with the MS bt stack or anything like changing my stack to a different' company's
hmm just want to ask.. have someone tried to pair Philip SHB7100 with HTC Raphael yet?? because i would like to buy this bluetooth, since my samsung WEP200 is not compatible...
thank you
excelex said:
hmm just want to ask.. have someone tried to pair Philip SHB7100 with HTC Raphael yet?? because i would like to buy this bluetooth, since my samsung WEP200 is not compatible...
thank you
Click to expand...
Click to collapse
Read here: http://hongkongphooey.wordpress.com/2007/10/23/unboxing-philips-shb7100-bluetooth-stereo-headset/
I use the Motorola Assist driving feature, and I noticed in the settings that it should learn my bluetooth devices associated with driving over time. I connect frequently to my JVC head unit through bluetooth, but it has never learned the device and will not auto play media from the application that I select.
Anyone else have this issue or know how to fix it?
bravesfan171 said:
I use the Motorola Assist driving feature, and I noticed in the settings that it should learn my bluetooth devices associated with driving over time. I connect frequently to my JVC head unit through bluetooth, but it has never learned the device and will not auto play media from the application that I select.
Anyone else have this issue or know how to fix it?
Click to expand...
Click to collapse
Yup... and nope. My in-truck bluetooth device (originally a Logitech adaptor, and recently a Kinivo BTC450) have never been recorded as a device in Asisst's Drive settings. As for play resume... this worked two updates ago, but the last two updates broke it, and this has been confirmed by Mark Rose @ Moto.
I have no solutions for fixing either short of waiting for another update... and hoping as many as possible reporting it through official channels so it becomes a priority for them to fix.
Hey guys,
I've been experiencing a problem with my bluetooth recently. I am always connected to bluetooth in my car or using my samsung level U, I use it for both media streaming and calls. But about one week ago when ever I am connected to bluetooth either to my car or my samsung level U I can only listen to music, but can't receive or make calls. So I'd be listening to music but if I get a call.. I can't answer through the car i need to pick up my phone. Same thing for my level U.
I've tried everything from simply unpairing and pairing it again. To clearing the bluetooth cache. The problem only seems to go away when I restart my phone. But it will only work once after I disconnect bluetooth the first time the problem appears again.
Ive also tried to simply check the phone audio selection under the bluetooth menu but it wont check it.
FYI i use to have an HTC One M7 before this phone. And it works just fine. I also tested a Samsung Note 3 with both the car and the Level U, it works just fine.
Specs:
Phone: HTC One X9 dual sim ( Android 6.0)
Car: Renault Safrane.
Hi
I have the same problem connecting my phone to my Sony car stereo and Bluetooth headphones, did you find a solution?
Hi everyone! Bluetooth working incorrect because that trouble in Google app and google play services. In support HTC Russia says that "
we know about this problem, Google in further updates will fix this problem. Thank you for understanding."