Tab 2 Android 4.1 not rooted- problem with USB gamepad - Galaxy Tab Accessories

Hello
I have a problem, when i plug in to my Tab 2 a gamepad i see " connected USB device with high performance" and bottom "can not get access to the device" (message translated from Polish), and USB/BT Joystick Center test app dont see a usb gamepad. I dont know what i to do. I dont want root my tablet but i want play with controler. Please help and sorry for my poor english
I forgot i use USB OTG adapter.

maybe at Tab 2 Accessories forum?
http://forum.xda-developers.com/forumdisplay.php?f=1599

Sorry my mistake please delete topic

Related

Use full usb keyboard

Hey everyone..
I would really love to connect a full usbkeyboard to my Magic 32A..
But then i connect my logitech G15, nothing happens..
I think it because of the need of a HID driver.. But i am not sure..
Does anyone now where i can get a HID driver for android?
//Reffer
lol. No. Just no
LMAO. FAIL.
If I remember correctly, there's a lot of posts about this on the official SDK mailinglist/forum/whatever. If you google it I'm sure you'll find something.
And shoo to the last two posters!
Hey mockillo. Thx for posting a answer i actually could use to something..
The only post i could find on SDK was this one: http://groups.google.com/group/andr...hl=en&lnk=gst&q=usb+keyboard#7397813348f7a9fa
And they say that android not support BLuetooth HID.. But nothing about normal.. I think i will try to make a topic in there too..
That's not how USB works. If you want a full keyboard you'll have to get a bluetooth keyboard & wait for the bluetooth SDK to be released (maybe rooted users can use bluetooth keyboards already?)
USB host
does anyone know if Magic hardware supports USB host? If so, it would be possible with 2.1
Just check this out: _ttp://jkontherun.com/2010/02/17/how-to-add-a-usb-keyboard-to-an-android-phone/
appearently MAKE magazine did an article about it. I say it just might work. but you may want to talk to some devs to see how to get into usb OTG mode with a mytouch.
anyone tried this?
on my last check no dev is building with USB HOST built into there roms ( things can connect to phone) unlike the normal usb slave (your phone can connect to things ) , plus if you were to use your phone as a host it would need to power the connected device (ie. Keyboard)
some good news ...
Most roms built off of CM source have a bluetooth HID stack... So like me i use a bluetooth keyboard (logitech media board for ps3) and it works great. And drains the battery no more than a bluetooth head set.
Sent from my HTC Sapphire using Tapatalk
same goes to me
haha. A funny guy... lol.....
You should find driver for that keyboard... I think...
Try v.mote this is exactly what you want... just the opposite (the phone become a keyboard..)

[Q] mouse detected as keyborad

Hello,
I didn't find any other thread talking about that, so I apologize if it is there anyway.
When I connect my usb mouse to my Note, it detects it as a keyboard ! I want to know if I could do anything to make it work properly please ?
Thanks in advance.
Cheers !
may be the mouse you are trying to connect is not supporting your device. or a faulty OTG Adapter. i tried with 5 brand mouse everything was working properly. but i couldn't connect USB keyboard to my Note, it shows "Keyboard Connected" but doesn't work.
EDIT: Tried with Logitech K200 Keyboard. it works..
Ok ok, yes i guess my mouse is not compatible. Thank you anyway ! ^^
Maybe there are some solutions but have to look further.

[Q] Control Galaxy Note from PC without streaming display

Hi All,
I've recently bought a dock with power and usb port, but unfortunately and for some reason, my USB OTG cable doesn't work. Anyway since my dock will be connected to the PC, OTG might not be needed.
I need a program for windows to control my galaxy note through USB. I don't want to see the phone display on my computer, I want to use the laptop's mouse and keyboard to control the phone as if am connect through OTG. Ideas?
refer HERE
I have already searched the forum for a solution and I couldn't find one. VNC or screen cast are not what I am looking for. The idea here is to transfer control as if you're connected through OTG, without the need to stream the display to the PC...
thehackersz said:
refer HERE
Click to expand...
Click to collapse
dude, no offense, there are better ways and apps for the same thing, there's too much effort to go through with what you've posted.
but actually, I'm also curious as to the OP's question
http://code.google.com/p/androidscreencast/
Airdroid is pretty good for this over wifi... Just allocates a port under your ip address and you connect through browser.
https://play.google.com/store/apps/details?id=com.sand.airdroid
Sorry, just read your post properly, this ain't what you're after at all I should probably go back to bed.
Sent from my GT-N7000 using xda premium

My Note load but does not connect to mass storage

Hi all!!
I have a big problem with my Note N7000, when connected to a computer via USB tells me it is loading but I get on the computer for data transfer that worries me a bit plus I have installed Samsung Kies for drivers but no, not if someone has come up ... Could anyone help me please
greetings!!
sorry for my English but is not as extensive and far use the translator was not meant "load" is "charge"
Usb Fix
Try this: Look at the micro usb port on the bottom of your Galaxy Note.
You will see a pin in the middle of it. Sometimes this is bent down, because people push the usb connector between computer and note in too hard.
If the pin is bent, bend it carefully straight, so that it is in the middle of the micro-usb port.
Try your connection again.
Please tell us your nationality in your profile, it will help if we know what language you speak....
I hope this helps.
try using your friend's cable see if its working.. "lots of stupid methods helped lots of smart guys"

Tab 8.0 Working MHL/USB OTG adapter

Just a quick post to let people know that the following adapter works with the 8" Galaxy Tab 3. As it's only about £10 I thoroughly recommend it.
http://www.amazon.co.uk/gp/product/B00E60A0XC/ref=oh_details_o05_s00_i00?ie=UTF8&psc=1
The Tab 3 I used for testing purposes is a Christmas present for my girlfriend so I only had a brief play with it to make sure that both Tab and adapter were working properly before hiding the former away back in its box As a result I won't be able to test the adapter again until after the 25th! Please note that the Tab is completely stock...
Anyway, here's what works.
MHL to TV using the HDMI output on the adapter:
This works very well. The screen of the tablet remains on so you can manipulate content directly on the tablet's screen while mirroring it to the TV.
MHL to TV with simultaneous USB OTG:
This is very cool and in effect turns the tablet into a mini PC. In this configuration I plugged a mains powered USB hub into the USB port of the adapter, then I plugged an 80GB bus powered hard drive and a dongle for a wireless keyboard/mouse combo into the USB hub. When I plugged the dongle for the wireless keyboard/mouse into the hub, the screen on the tablet turned off. This is actually a great feature and I wish my Note 2 did the same thing to help keep it cool. The Tab automatically senses the keyboard and mouse as well as the hard drive. Attaching the hard drive triggers the file manager to open so you can browse its contents. I tested a couple of SD movies and they played smoothly with no slow down. The keyboard worked almost as expected, the exception being that the 'Home' key on the keyboard didn't work at all for me (it does on my Note 2) which was problematic until I realised that the 'Internet' shortcut key on the keyboard acted as a home key. The other Media shortcut keys worked for me. For those who haven't used a full sized keyboard with their device before, the 'Right Click' button to the right of the space bar acts as the Menu key (essential) and if you hover the mouse over a scrollable list, you can then use the mouse wheel to, um, scroll.
For those who haven't used MHL before, bear in mind that a device has to work harder to mirror the display to the TV. As a result things can get a bit jerky. To this end I quickly ran Epic Citadel benchmark to see what impact this had on the Tab. In the higher quality setting mode the Tab scored 54 fps on its own, and 45 fps when connected to a TV. This is much higher than expected. Web browsing remained fairly fluid when connected to the TV too which is good.
As a final Note, the TV I tested the adapter with only has a 720p panel and not full HD, so your mileage may vary from a performance point of view. If you find the edges of the Tab's screen a cut off on the TV, go into TV's settings and select 'scan only' for the picture format.
Hope this helps.
Ouzo said:
Just a quick post to let people know that the following adapter works with the 8" Galaxy Tab 3. As it's only about £10 I thoroughly recommend it.
Hope this helps.
Click to expand...
Click to collapse
Good grief, it's huge! (that's what she said )
I'd be worried about damaging the connector on the tablet with all that mass hanging off it, even worse with cables.
Peter
sportq said:
Good grief, it's huge! (that's what she said )
I'd be worried about damaging the connector on the tablet with all that mass hanging off it, even worse with cables.
Peter
Click to expand...
Click to collapse
LOL
I think the picture shows it with an S4 from memory. It's just under 3 inches long and half an inch thick (!). It is a bit awkward with cables attached to it, but when i use it with my Note 2 it's just awesome.
Does this enable charging the Tab while everything is plugged in?
I have T310 model. See many compatible adapters on ebay, sellers confirm compatibility. Just came across this site meetmhl.com. Clicked on "do i have mhl" bottom of page. My devices were recognized. Says "sorry your galaxy tab 3 8.0 does not currently have MHL technology". WTF???!!!
I've ordered a generic or samsung? tab compatible. When connected with the oem charger cable my tab gets power but not charging. "HDMI connected" pops up for a second but no signal to tv. HDMI input is recognized as active and selected in tv.
Confirmed the adapter in the opening topic works as advertised
Sent from my SM-T310 using xda premium
thanks for your info!!!
i read in the description of the amazon link u possed, that the tab doesnt have the root...
if i root my tab it doesnt work??
and, what keyboard do u have??
pd:sorry for my english, im spanish!
I have this one for my tab 3 10.1,also works with the 8inch and just £4.85 and free postage...
http://www.ebay.co.uk/itm/1080P-MHL-to-HDMI-HD-TV-Cable-Adapter-Samsung-Galaxy-Tab-3-10-1-8-0-Inch-Tablets-/191418506443?pt=UK_MobilePhones_MobilePhoneAccesories_MobilePhoneDataCables_JN&hash=item2c916e9ccb
---------- Post added at 06:27 PM ---------- Previous post was at 06:26 PM ----------
javifever said:
thanks for your info!!!
i read in the description of the amazon link u possed, that the tab doesnt have the root...
if i root my tab it doesnt work??
and, what keyboard do u have??
pd:sorry for my english, im spanish!
Click to expand...
Click to collapse
It shouldn't make any difference...
hello to everyone! please help me because i want to order this http://www.ebay.com/itm/OTG-MHL-to-...Domain_0&var=570511981115&hash=item3f4122a784.
I have the tab SM-T310 rooted with the custom rom BINDROID ONE (stock based) mhl and otg work perfect. i want to ask please, if i connect at the same time mhl via hdmi to tv and two usb bluetooth adaptors for mouse and keyboard, will all these work at the same time?? ?Because in another buying seller says MHL AND USB DOESN'T WORK AT THE SAME TIME!!!!Please help me!! !
kos25k said:
hello to everyone! please help me because i want to order this http://www.ebay.com/itm/OTG-MHL-to-...Domain_0&var=570511981115&hash=item3f4122a784.
I have the tab SM-T310 rooted with the custom rom BINDROID ONE (stock based) mhl and otg work perfect. i want to ask please, if i connect at the same time mhl via hdmi to tv and two usb bluetooth adaptors for mouse and keyboard, will all these work at the same time?? ?Because in another buying seller says MHL AND USB DOESN'T WORK AT THE SAME TIME!!!!Please help me!! !
Click to expand...
Click to collapse
Video out and OTG cannot be used at the same time because they are on the same connector , they are mutually exclusive. Why would you want to use USB for a bluetooth mouse when you can just use Bluetooth?
i emailed the company and they said me that it is possible!! !i am rooted and i lost ez mirror option, so i was looking to that option because ONLY bluetooth keyboard and mouse are very expensive!! !!!

Categories

Resources