hi all...
is there any one can help me with my tab sprint..?
every single i connect my tab sprint to my laptop and open control panel>syestem>hardware>device manager>it show me on port 12
but if i open the QPST it show me port 12 enabled but on the right side show me no phone. and i cand read my phone from QPST things...
also
if i open CDMA Workshop and choose port 12 under the tab saying failed to connect port
i do ##8778# and chose modem
also use usb debuging
is there any one can help me out?
sandyto81 said:
hi all...
is there any one can help me with my tab sprint..?
every single i connect my tab sprint to my laptop and open control panel>syestem>hardware>device manager>it show me on port 12
but if i open the QPST it show me port 12 enabled but on the right side show me no phone. and i cand read my phone from QPST things...
also
if i open CDMA Workshop and choose port 12 under the tab saying failed to connect port
i do ##8778# and chose modem
also use usb debuging
is there any one can help me out?
Click to expand...
Click to collapse
well i had created a thread yesterday. to bad i didnt find this post i was using the wrong spelling. but anyways iam having the same exact issue as you. thats why i had creadted the thread. once again my apologies to all the mods of this forums for doing that. but this is the same issue that i have. i dont know what do i need to be flash into my tab to reflash it again. i know how tho reflash it iam not describing how in here since i know the rules.. i just need to know what to flash to my tab in order to be detected as a phone as used to be before i checked thie damn clear ECS and it wiped everything out ever since. before this whole happened i used to plug it into the usb en qpst usted to detected as FFA6550-ZRF6500 wich is the same as my Epic 4G. but now it doesnt even show that after this happened. any help will be apreciated.. thanks guys.
Has anybody ever figured out how to get around qpst showing no phone on the tab?
Sent from my SPH-D700 using Tapatalk 2
Hi, I am having issues with getting the drivers to install on my new Galaxy Note. I am trying to install the ones on Android Development to root the phone to get 4G with T-Mobile. I researched online but they all point to getting rid of Kies. I cannot find a way to get rid of Kies. I need help please. Thanks in advance.
Go to this thred http://forum.xda-developers.com/showthread.php?t=1424997
you will find link to driver for 32/64bit, it is in first few lines of first post.
Donno is this help u
but in my case,i trying to root and fail
after i keep on trying with all of the menthod
i found out that,just bcoz im using USB 3.0 ...
and it make me fail to root n fail to connect kies also
after i change it to USB 2.0
all thing work fine now
SO the problem is the USB 3.0 and 2.0
I own a Galaxy S GT-i9000( bought at SFR)
When I connect it to computer I get the prompt that tells to choose between Storage, Kies...
But whatever I choose the computer tells me USB Device not recognised.
Now I was stupid enough to do the following:
I managed to root using Z4root by copying the APK file on external sd .
I got rom manager and updated my recovery.
I updated using the CM10-unofficial rom that is in the development forum: http://forum.xda-developers.com/showthread.php?t=1775169
The Mobile Network was not working so I did the following
I restored the nand that i did in recovery and now the phone is frozen on the first boot screen (Galaxy S GT-i9000 SCREEN)
Now I can go to Download mode but I can't go to recovery mode.
Let me remind you that my USB data connection is not working. So even though I enter into the Download mode I am not able to use Odin. If you know somthing that I am not doing, let me know.
So now I am looking for a solution that would permit me to flash without USB or allow me to go to recovery mode. Or a tutorial on how to change the usb port myself.
Thanks in advance.
kigordid said:
So now I am looking for a solution that would permit me to flash without USB or allow me to go to recovery mode. Or a tutorial on how to change the usb port myself. Thanks in advance.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=29464733&postcount=10
You can try using Mobile Odin.
Also, you can try Heimdall method: https://www.fixmystuff.in/FMS_Forum...-flashing-to-original-rom-using-heimdall.126/
Hey
have you tried to connect it in Download mode??
Need more solutions
Thanks again to all of you that have answered me so fast.
Well I just finished trying all that you suggested.
unfortunately am still at the same point. Whatever I do, whatever drivers am putting in, cleaning inside the USB port with methylated spirit... Not getting Odin or Kies to detect it.
I read somewhere that when the data connection works, I should see the device named Samsung Device even before installing the drivers, but all I am getting is Unknown device. I still went ahead uninstalling and installing the drivers you provided and there is no successful outcome so far.
I still have faith. I have a little knowledge in electronics. I can open my phone and get to the usb port. My problem is I don't get any tutorial on how to replace the usb port. The thing is the connections are very tiny. I can also do with a bypass way that could make me install a 2nd usb port temporarily just long enough to flash the phone.
Or a hardware solution if I have to remove and flash a specific IC in a certain manner.
Thank you in advance.
help
hi there,
after doing alot of stuff to your phone that wasnt nessacary i'm not surprised it doesnt work er sorry . the only thing i can think of is the following whenever i have a problem with windows i go to linux, which is faster , much more efficient . so i suggest that you install linux ( ubuntu the best ) and try using odin with the linux version, it often detects things that windows doesnt see. other than that sorry cant think of anything else .
see ya
Trying it
thesmegger said:
hi there,
so i suggest that you install linux ( ubuntu the best ) and try using odin with the linux version, it often detects things that windows doesnt see.
see ya
Click to expand...
Click to collapse
Thank you.
Am going to boot on linux right away. I will let you know.
Back to zero
kigordid said:
Thank you.
Am going to boot on linux right away. I will let you know.
Click to expand...
Click to collapse
It doesn't change anything.
Am back to my start point.
Thank you though.
Anything Else?
Does anyone have something else to suggest or I should consider my phone dead?
Look like a quite number of people are having this same issue and haven't got over it.
I just hang on and appeal to all of you cos I know XDA is the best place where I can get a solution.
Lemme know any suggestion... even the ones you are not sure can help. Am willing to do anything.
Thanks again all of you.
hi
hi there
if all else fails there is a jig
http://forum.xda-developers.com/showthread.php?t=1402286
this forces your phone into download mode and will help for sofy bricks so look it up on the link and try that , sometimes on local forums like we have in france members will comme over and lend you one , or just buy one eyc .
hope that helped
see ya :good:
Uninstall from PC Kies, instal samsung drivers, then download and flash mod 2.3.4 xxjvp stock? / Or other, 3.PDA, PHONE, CSC / pit is 512 and re-partition and start to turn in Odin.
Hi there,
I need some help here..my p990 usb only charges when connect to pc or playstation 3. I know it isn't a driver problem because i have already tested other two p990 at my pc and both devices are recognized/usb work.
I've tried smartflash/nvflash but the device can't be recognized by windows..
So, can i assume the usb hardware is dead :crying:? any tip for fixing this matter ?
Thanks in advance,
Nardocf said:
Hi there,
I need some help here..my p990 usb only charges when connect to pc or playstation 3. I know it isn't a driver problem because i have already tested other two p990 at my pc and both devices are recognized/usb work.
I've tried smartflash/nvflash but the device can't be recognized by windows..
So, can i assume the usb hardware is dead :crying:? any tip for fixing this matter ?
Thanks in advance,
Click to expand...
Click to collapse
Maybe the issue is the cable mate.'......try to change it.
Hope it helps
O2X with Magical ROM and supersonic kernels from my buddies
Hm... Tell us something more about the ROM, baseband and everything you have now on it ?
SREEPRAJAY said:
Maybe the issue is the cable mate.'......try to change it.
Hope it helps
O2X with Magical ROM and supersonic kernels from my buddies
Click to expand...
Click to collapse
I already done this but the usb won't work and the same cable works with another p990. :crying:
torq1337 said:
Hm... Tell us something more about the ROM, baseband and everything you have now on it ?
Click to expand...
Click to collapse
At the moment with Gueste2X_GoodBye-2.0 + gestekrnl 2.1 without oc, baseband 0725.
Did you try to switch mode? From "mass storage" to "mtp"?
amagyar said:
Did you try to switch mode? From "mass storage" to "mtp"?
Click to expand...
Click to collapse
No. How can i try this?
go to Settings->Storage-> hit the menu button -> USB-Connection(PC) -> choose between the options.
Actually I'm having the same issue. But I'm really sure my USB port is broken.
The device just isn't recognizing that it is being plugged into something.
(And I tried everything anyone ever reccomended on the USB not working matter)
I just use a cardreader to put stuff on my SDcard. I just hope I never have to repair my device via NVFlash. That's impossible now.
Other than that it's not a big deal for non-devs
Iconoclasm said:
go to Settings->Storage-> hit the menu button -> USB-Connection(PC) -> choose between the options.
Actually I'm having the same issue. But I'm really sure my USB port is broken.
The device just isn't recognizing that it is being plugged into something.
(And I tried everything anyone ever reccomended on the USB not working matter)
I just use a cardreader to put stuff on my SDcard. I just hope I never have to repair my device via NVFlash. That's impossible now.
Other than that it's not a big deal for non-devs
Click to expand...
Click to collapse
Can't enter into this menu usb-connection(pc) when i press menu button nothing happens.. I think we are in the same boat because my phone can't be recognized in apx mode/ sw mode ..
Iconoclasm said:
go to Settings->Storage-> hit the menu button -> USB-Connection(PC) -> choose between the options.
Actually I'm having the same issue. But I'm really sure my USB port is broken.
The device just isn't recognizing that it is being plugged into something.
(And I tried everything anyone ever reccomended on the USB not working matter)
I just use a cardreader to put stuff on my SDcard. I just hope I never have to repair my device via NVFlash. That's impossible now.
Other than that it's not a big deal for non-devs
Click to expand...
Click to collapse
The same is happening with my p990 to. I can´t connect to pc with pc connection. To transfer data i use the card reader or with airdroid who it make with wifi.
Others users that had this problem they sent the phone in warranty and Lg have changed their mainboards. So if you have warranty go and solve your problem with your LG shop. It´s seems that is not any solution to solve this annoying problem with this bad hardware
Hello, same problem here. Well, "you need to send it to LG".. but there's one problem. I have MIUI and I can't flash back original ROM without nvflash. How to deal with it?
Try this: open LG update tool > options > "?recover (phone)? " > do by imei > enter serial and imei. LG update tool checks baseband for updates, for recovery idk, but I guess recovery cm only needs the numbers entered. Worth a try, and I'd like to know too.... Thanks Ferrum Master, you made me know about this function
SuperSkill said:
Try this: open LG update tool > options > "?recover (phone)? " > do by imei > enter serial and imei. LG update tool checks baseband for updates, for recovery idk, but I guess recovery cm only needs the numbers entered. Worth a try, and I'd like to know too.... Thanks Ferrum Master, you made me know about this function
Click to expand...
Click to collapse
well at mine don´t works. thank you very much for you solution.
I have the same problem. It's not possible to connect to the phone either by LG tool or as mass storage. I've tried different cables, computers and cleaning the connector in the phone without success. I'm running stock GB.
I would really like to root the phone to be able to flash CM10. Is there any way to do this without USB connection?
Edit: I've already tried NVFlash and SuperOneClick
I had the same problem last weeked and i manage to solve it, im busy right now but I promise i'll tell you how i solved it later today or tomorrow
Sent from my Optimus 2X using xda app-developers app
Nardocf said:
Hi there,
I need some help here..my p990 usb only charges when connect to pc or playstation 3. I know it isn't a driver problem because i have already tested other two p990 at my pc and both devices are recognized/usb work.
I've tried smartflash/nvflash but the device can't be recognized by windows..
So, can i assume the usb hardware is dead :crying:? any tip for fixing this matter ?
Thanks in advance,
Click to expand...
Click to collapse
Hey hello, I wrote yesterday and told you that I would teach you how to fix this bug, I'm almost done with the tutorial, I had to make all over again so I could tell you step by step, unfortunately, the fix I found is temporal, so, I'm trying one more thing to see if I can make it permanent, and also, i'm wating for Hulk to answer me where to post this fix, 'cuz you're not the only one with this problem, so I think would be better to create a thread with my solution, i'm sorry if I could not give you the instruccions today but I think later today or tomorrow hulk will tell me where to put it, as soon as I post the solution, I'll post here a link to the thread, just wait a bit more
greetings
I just posted my solution, you might want to give it a shot
Look here
http://forum.xda-developers.com/showthread.php?p=33870935#post33870935
hello everyone, i would like to ask: anyone with jellybean and windows xp has been able to get the pc recognise your device! i have try tons and tons of drivers, even from sdk tools and none of them worked for me...
all i wanna do is used the "reverse thetering" but adb doesnt list my device... and i repeat i have no problem at all when i use gb, the problem comes with ics and jb, havent been able to find the correct drivers.
Once i flash jb i wont be able to use adb? in case i could, why none of the drivers i download even from sdk tool work for me?
Ty for replay and merry christmass to all!