Hello everyone. I have had my Droid Bionic since day one and I have never had an issue with it. It has been wonderful.
Until today. I am on the stock OS. I had a Live Wallpaper that showed a little Android figure that melts based on the percentage of my battery. I went into my Gallery and clicked on "Set As Wallpaper" on an image I took with my camera on the phone.
At the bottom of the phone, a small popup showed up that said "COMPLETED". When I went to the home screen, there was no wallpaper in the background. It was just black, though the icons were still there and it was responsive. I thought maybe the image was corrupt, so I went and tried another image.
This caused the phone to reboot. When it rebooted, there was a notification bar, the time, the lock screen, and a thing that said No Signal. I tried to unlock it, but the phone was unresponsive.
Then I got a text message, even though I had no signal. The notification light was blinking. I could not unlock the phone. I hit the sleep button, and it went to sleep. I tried hitting it again, and it would not wake up.
I tried pulling the battery and putting it back in, and now it won't properly boot. Right when it boots, it goes to sleep (the little shutdown animation). I texted myself from my sister's phone and the notification light blinks, the phone vibrates, and the screen turns on and shows I have a text on the notification bar. The screen and the buttons are completely unresponsive, however.
I tried calling myself from my home line and I could pick up the call just fine and end the call. I could not, however, go back to the home screen while on the call. The capacitive buttons on the bottom were completely unresponsive. When I hung up the call (by touch), it went to a completely black screen with the notification bar showing that I had some text messages and the time and my service, etc.
I have rebooted the phone five times now by removing the battery and it keeps going to this. I have never rooted the phone (I wouldn't even know how to) and I am concerned because of all of the information that I have saved on the phone.
Yes I have tried removing the SD card. Didn't help.
Any suggestions? :/
UPDATE: Now the phone doesn't even boot, it gets stuck at the Red Eye spinning logo. It vibrates twice and the notification light begins blinking, meaning it is letting me know that I have received text messages... but it isn't actually booting to the Android home screen. Really strange...
You should fxz back to stock
It will wipe your application data but not you're sdcard info or internal storage
Sent from my DROID BIONIC using xda premium
Hard reset using all three external buttons
Try doing a hard reset - it's one of those things they only tell you about at the Verizon store when you're stuck:
Once you have the phone on and at least responsive, press and hold BOTH volume keys, then hold the power button down for 10 seconds (it's really about 6, but 10 will do it for sure). This procedure can also be done to force a reboot when you load a gnarly application that sux and locks your phone up - without having to disassemble everything and pull the battery.
Hopefully with any luck, you're phone will do a back-flip and come up!
This morning I noticed that my watch was restarting itself a few times while on charging dock, so I thought that there might be a new OTA. Then, when I'm about to leave, it just stay dead (it says disconnected on the phone too).
I tried long press (5, 8, almost a minute), nothing happens. When I placed it back onto the dock, it just show full battery icon and then nothing. I tried long-pressing the button while on the dock too, nothing...
I'm at loss here, if possible I'd like to avoid return (problematic, coz it is imported).
inscythe said:
This morning I noticed that my watch was restarting itself a few times while on charging dock, so I thought that there might be a new OTA. Then, when I'm about to leave, it just stay dead (it says disconnected on the phone too).
I tried long press (5, 8, almost a minute), nothing happens. When I placed it back onto the dock, it just show full battery icon and then nothing. I tried long-pressing the button while on the dock too, nothing...
I'm at loss here, if possible I'd like to avoid return (problematic, coz it is imported).
Click to expand...
Click to collapse
1. Hold the button until it starts vibrating, then keep holding until it turns off.
2. Press the button to turn it back on and then QUICKLY (as SOON as the LG logo shows), swipe from 11 o-clock to 5 o'clock (diagonally) on the screen to enter the bootloader.
3. Once you see the bootloader, tap > until the red text says RECOVERY MODE, then tap O to boot into recovery.
4. Once you see the green droid robot, tap the screen to bring up the recovery menu.
5. Swipe down until the factory reset option is highlighted, then press the button.
6. Swipe down until Yes is highlighted, then press the button.
7. Wait for the factory reset to complete.
8. Swipe up to highlight "reboot system now" in the recovery menu if it's not already highlighted and press the button to reboot.
9. Wait until the watch boots into the setup screen - this will take about 3x-5x longer than a normal boot, so be patient.
10. Set up the watch with your phone.
siraltus said:
1. Hold the button until it starts vibrating, then keep holding until it turns off.
2. Press the button to turn it back on and then QUICKLY (as SOON as the LG logo shows), swipe from 11 o-clock to 5 o'clock (diagonally) on the screen to enter the bootloader.
3. Once you see the bootloader, tap > until the red text says RECOVERY MODE, then tap O to boot into recovery.
4. Once you see the green droid robot, tap the screen to bring up the recovery menu.
5. Swipe down until the factory reset option is highlighted, then press the button.
6. Swipe down until Yes is highlighted, then press the button.
7. Wait for the factory reset to complete.
8. Swipe up to highlight "reboot system now" in the recovery menu if it's not already highlighted and press the button to reboot.
9. Wait until the watch boots into the setup screen - this will take about 3x-5x longer than a normal boot, so be patient.
10. Set up the watch with your phone.
Click to expand...
Click to collapse
I would have done the following if the thing actually can boot in any way. It seemed that it was stuck at some point in the booting process and somehow went into a 'limbo' state?
Thanks for the complete description, but here's how it ended up to me: it seemed that the watch was in an ON state all the while this thing was happening. I waited about 12 hours, until it is seemingly out of juice completely. Then, putting it back to the charger turned it back on and boots properly. Hopefully it won't happen again to me, or I have to send it back to the seller, really...
LG R watch "not turning on"
inscythe said:
This morning I noticed that my watch was restarting itself a few times while on charging dock, so I thought that there might be a new OTA. Then, when I'm about to leave, it just stay dead (it says disconnected on the phone too).
I tried long press (5, 8, almost a minute), nothing happens. When I placed it back onto the dock, it just show full battery icon and then nothing. I tried long-pressing the button while on the dock too, nothing...
I'm at loss here, if possible I'd like to avoid return (problematic, coz it is imported).
Click to expand...
Click to collapse
I'm in the same situation let see if once my watch gets fully charge I will try to do the process, you are not the only one with this problem
---------- Post added at 12:37 PM ---------- Previous post was at 12:29 PM ----------
inscythe said:
This morning I noticed that my watch was restarting itself a few times while on charging dock, so I thought that there might be a new OTA. Then, when I'm about to leave, it just stay dead (it says disconnected on the phone too).
I tried long press (5, 8, almost a minute), nothing happens. When I placed it back onto the dock, it just show full battery icon and then nothing. I tried long-pressing the button while on the dock too, nothing...
I'm at loss here, if possible I'd like to avoid return (problematic, coz it is imported).
Click to expand...
Click to collapse
alextabata said:
I'm in the same situation let see if once my watch gets fully charge I will try to do the process, you are not the only one with this problem
Click to expand...
Click to collapse
The last thing I remember was that I update my watch to the new lollipop android update.
Does it create the problem of in watch????
This process it's no working !!!!!!!
siraltus said:
1. Hold the button until it starts vibrating, then keep holding until it turns off.
2. Press the button to turn it back on and then QUICKLY (as SOON as the LG logo shows), swipe from 11 o-clock to 5 o'clock (diagonally) on the screen to enter the bootloader.
3. Once you see the bootloader, tap > until the red text says RECOVERY MODE, then tap O to boot into recovery.
4. Once you see the green droid robot, tap the screen to bring up the recovery menu.
5. Swipe down until the factory reset option is highlighted, then press the button.
6. Swipe down until Yes is highlighted, then press the button.
7. Wait for the factory reset to complete.
8. Swipe up to highlight "reboot system now" in the recovery menu if it's not already highlighted and press the button to reboot.
9. Wait until the watch boots into the setup screen - this will take about 3x-5x longer than a normal boot, so be patient.
10. Set up the watch with your phone.
Click to expand...
Click to collapse
How can I do the 2 step if the screen don't show any lg logo or any light at all?
By the way my phone says the watch is connected.
Please help
I have the same problem with my LG G Watch, it doesn't show LG logo, just showing charging and blinking with big battery logo while connected with charging cradle.
I keep it for 2 week to wait for battery drain, and again when I connect charging cradle it shows the same thing.
I guess there's something problem with hardware.
Anyone can guide me, how can i fix this.
Need help.
I just experienced the same issue. Leaving the watch to drain the battery does not help. Is there any other solution?
You're the man! Thanks for the step by step instructions! One thing I would add to your instructions would be to do all this while the watch is sitting on the charger. Seems like my watch didn't charge at all and when I tried to hold down on the button nothing happened until I did so with it sitting on the charger during the whole process. I just started to setup my watch and it's at 5% so that was definitely the case!
---------- Post added at 08:57 AM ---------- Previous post was at 08:55 AM ----------
Do the whole process with the watch sitting on the charger. This worked for me like a charm. The reason it's not doing anything is because the watch can't charge until you reset to factory settings.
---------- Post added at 08:57 AM ---------- Previous post was at 08:57 AM ----------
Do the whole process with the watch sitting on the charger. This worked for me like a charm. The reason it's not doing anything is because the watch can't charge until you reset to factory settings.
This happen to me once too. What is did was to just put the watch in the charger n long press the function button for about a min n it started up. For some reason the watch got stuck in a loop while it was charging over night. I have been experiencing a few strange bugs happen during the past few weeks. Such as watch zooming n not responding to touch control n watch not responding to turn wrist light up display.
My g watch also no stay "on" anymore, two days ago [battery was 57%] shuts down suddenly and since then I can not start this watch .
Tried everything, this anoying loop is killing me, if I put it for some time in the charger dock starts for a couple of seconds and shuts down [ sometimes shows starting 36 apps and after finish shuts down again]. Also for a couple of time I entered in recovery mode and reset and wipe, but from today I can not enter in bootloader anymore.
If stays on the charger not showing anything [ only if I kep the buton pressed for 30 sec start to blink the battery icon until I keep the button pressed.
Run out of methods, is something that I am not tried ? Keep all night on the charger , but the same litlle loop [ the watch is very hot on charger but I think is not charging].
Please some one can help me ?
Same issue
mobiemi said:
My g watch also no stay "on" anymore, two days ago [battery was 57%] shuts down suddenly and since then I can not start this watch .
Tried everything, this anoying loop is killing me, if I put it for some time in the charger dock starts for a couple of seconds and shuts down [ sometimes shows starting 36 apps and after finish shuts down again]. Also for a couple of time I entered in recovery mode and reset and wipe, but from today I can not enter in bootloader anymore.
If stays on the charger not showing anything [ only if I kep the buton pressed for 30 sec start to blink the battery icon until I keep the button pressed.
Run out of methods, is something that I am not tried ? Keep all night on the charger , but the same litlle loop [ the watch is very hot on charger but I think is not charging].
Please some one can help me ?
Click to expand...
Click to collapse
____________________________________________________________________________________________________
It started after the 5.1.1 update and we are not the only ones having this issue. I am trying to charge it while in bootloader mode using a higher voltage charger. I will report back if it works
tristarwolf said:
____________________________________________________________________________________________________
It started after the 5.1.1 update and we are not the only ones having this issue. I am trying to charge it while in bootloader mode using a higher voltage charger. I will report back if it works
Click to expand...
Click to collapse
OK,
Charging the LGR in bootloader mode worked but I am still having issues so now I am going to try to re-flash it.
If I leave the watch alone for a couple of hours and I put it in the charger, starts first time showing 36 apps and after it's shuts down. After that it starts for 2 or 3 times but only until those colored balls, then is dead again [ even if I leave it on the charger for all night ]. Also tried with 2.0 A and 1.0 A charger.
The worst is that I can not enter in bootloader mode anymore, when it starts on the LG icon I try in vain with my finger from 10.00 clock to 17.00 , the watch is not responding anymore to this command. Only when I put it on the charger and keep pressed the button for more then 30 seconds the battery icon is flashing, when I relese the button the battery icon disapears.
Very disapointed, I have to throw it in the garbage and I never will buy LG.
LG R watch fixed
mobiemi,
I got my watch back to working. First, delete all android wear apps from your phone do the same for the Android wear app. Next, clean the screen off (since you are having issues) then let it charge for a few minutes to an hour (even if it looks like its not charging it is). Once charge it might come back on all on its own (let it do so). After it tries twice it will not do it power on again (still let it sit for awhile longer). Next, take it off the charger and power the watch on and try to access the bootloader by swiping downward from 11 to 5 and perform a factory reset, put the watch back on the charger. Once done do a reboot and it will attempt to reset but might power off, don't panic mine did the samething. Finally let it sit on the charger awhile later it will come back on in factory reset mode, ready to connect to your phone. Let the watch sit to recharge before downloading the android wear app and connecting it back to your phone. FYI I did three times heres why- once I added an app it went back to having the same issue as before with restarting and dying. So word of advice do not install any apps. Google is working on a new update to fix the issue so be patient. I hope this helps!
Thank you for your detailed explanations, tried your method but dosen't work because I can not enter bootloader mode [ I think my watch has not enough power to start the bootloader ].
The screen is very clean and the watch not react at my command. I remember last week I was able to resurect once the watch with similar method like you, but now has not enough juice to start proper. When I put it in the charger show 1 second the battery icon, then starts with LG icon [ in vain try to enter bootloader ], once from 10 times starts, goes until starting 36 apps and shuts down [ when I left it for a period of time and is not that warm like when is lifted from charger ], but mainly not goes far then colored balls.
I have not another explanation for not entering the bootloader and why not going further than a few seconds. Left it 1 minute, half hour and also all night on the charger [ the watch get warmer ], with multiple charger and also from laptop usb.
My watch is slowly dying, only when I put it in the charger start for maximum 5 seconds and shuts down, after that I try again to start without charger [on the charger not starts at all ] and again after 4 seconds is dead. When starts the screen with LG icon did not react at all to finger touch , could not enter bootloader anymore[ lack of power ? ] I think in a couple of days is dead . Courious when is in the charger for longer period it gets very warm but in vain. Unfortunatelly I have no warranty.
I've had the same issue so I sent it in and I am patiently waiting to get it fixed. In the meantime they sent me a list of items they'll replace...
PCB assembly
Rechargeable battery
Cover assembly
LG2 (no idea what that's going to be)
Sent from my HTC One using Tapatalk
tristarwolf said:
mobiemi,
I got my watch back to working. First, delete all android wear apps from your phone do the same for the Android wear app. Next, clean the screen off (since you are having issues) then let it charge for a few minutes to an hour (even if it looks like its not charging it is). Once charge it might come back on all on its own (let it do so). After it tries twice it will not do it power on again (still let it sit for awhile longer). Next, take it off the charger and power the watch on and try to access the bootloader by swiping downward from 11 to 5 and perform a factory reset, put the watch back on the charger. Once done do a reboot and it will attempt to reset but might power off, don't panic mine did the samething. Finally let it sit on the charger awhile later it will come back on in factory reset mode, ready to connect to your phone. Let the watch sit to recharge before downloading the android wear app and connecting it back to your phone. FYI I did three times heres why- once I added an app it went back to having the same issue as before with restarting and dying. So word of advice do not install any apps. Google is working on a new update to fix the issue so be patient. I hope this helps!
Click to expand...
Click to collapse
I'm having the same problem like mobiemi. I'm trying your method without deleting all android apps in my phone since I wiped data and cache from my watch's recovery mode. Since it cannot connect to my phone due to not being able to boot properly, I don't think it's necessary to uninstall the apps from my phone. But I've been resetting and wiping data&cache from my watch but it's still doing the same thing. It shuts down on its own after "starting apps xx of xx". Sometimes it will boot till the colored dots and after that it will go blank and shuts down.
Yeah, I thought the same thing at first until I got it back up and running the first time and as soon as the old apps were sent back to the watch it started looping all over again. I was able to reinstall my apps after the latest android wear update. My LGR is currently working with apps and holding a charge longer than a day.
kevzz01 said:
I'm having the same problem like mobiemi. I'm trying your method without deleting all android apps in my phone since I wiped data and cache from my watch's recovery mode. Since it cannot connect to my phone due to not being able to boot properly, I don't think it's necessary to uninstall the apps from my phone. But I've been resetting and wiping data&cache from my watch but it's still doing the same thing. It shuts down on its own after "starting apps xx of xx". Sometimes it will boot till the colored dots and after that it will go blank and shuts down.
Click to expand...
Click to collapse
Hope is not true, unfortunately you are after me, after a while you can not enter either the bootloader . For two weeks I do nothing but I try to turn it on.
*If the button does not turn, I put in charger: starts 10 seconds goes out and turns back for another 30-40 seconds [colored balls], sometimes flashing until the 36 apps loaded, then goes off . I tried hundreds of times, placed in charger, power on from button, put back on charger, left and so on until going crazy.
**Because not enter bootloader I thought the touch it not works anymore, but by a miracle last week lit one minutes [came in white screen apps Starting 36] and went out, I powered by button and the screen shows the welcome screen, language, [responding to commands], unfortunately I was in another room and appeared on the screen put me in charge, until I got to the charger it faded again. From then I do not manage to get out of this deadly circle.
If someone manage to escape from this loop please help me with detailed steps.
A strange occurrence happened yesterday with my Galaxy s6 from T-mobile. It is stock, unrooted, and on latest release. all of a sudden, the display screen went into monochrome (black and white ) mode. Battery was at 44%, so i dont think it was due to power saving. I also connected charger to further charge it. After some minutes, i turned it off, and restarted. While restarting, i can see samsung logo in color, and lockscreen was in color for few seconds, and then display immediately went mono. after few couple of more reboots, i wiped the cache in hope to clear any issue due to any app update. but still the same result. Then switched from Nova launcher to Touchwiz , but still the same even after one more reboot. So, i thought the phone may have become defective. Then , after a while, just pressed home button few times trying to unlock the phone, and this time, the screen came back to color!!!!
Has any one ever experienced this? What could be the cause? Software or Hardware?
ok, finally figured out what happened. There is a "Accessibility" menu, and one of the "direct access" shortcut is to make the screen grayscale, for whatever reason, that shoutcut key was checked. once you press home key 3 times in succession , that feature will be enabled.
Hello,
I have a rooted and TWRP installed but otherwise stock 5.something T710 that I had worked on months ago. It's been great and my daughter had been using it to watch videos a couple days ago. I took the tablet from her at the end of our road trip and noticed it had about 63% battery left. I left it in the truck while we went to the movies(about 40 degrees f outsides) and then drove home without ever touching it until we got home. I went to use it when we got home and it would not turn on. I plugged it in to let it charge thinking it died for some reason, using the stock charger, though battery icon never appeared. The next morning I went to check it and it still would not turn on.
When I press the power button or plug in or unplug the charger the Recent and Back soft key lights will turn on for a second, then turn back off again.
I've tried:
Holding the power button down alone for over 3 minutes.
Held the power and volume up button for over a minute
Power and volume down for over a minute.
Home, volume down and power for over a minute
Home, volume up and power for over a minute.
I can connect it to my computer and it recognizes that my Tab S2 is connected but no files show as the default for the device was just charging mode and not the file modes.
Odin3 v3.10.7 recognizes it as connected. But fails to send the TWRP file again.
Any help?
Since the soft keys light up and the computer recognizes the device, it sounds like maybe the tab is still working but with no display? By any chance did you have adb working? I f so you could try rebooting, or booting into recovery to see if you see anything on the screen. It's possible that when you held the button combos, that it did boot into download and recovery but you couldn't see anything? In which case it could be a hardware problem. Hopefully it will fix itself! Sorry I can't be of more help..
Well adb shows the device as unauthorized. Reboot command says the same thing.
The home key is unresponsive to my finger print unlocks and no sound plays when I try to adjust the volume, like the ding sound it makes to hear if this is the volume level I want. There are never any of the capacitive touch vibrations or whatever its called to feel when you press a button on the screen.
I was wondering if it had something to do with hardware it's just strange that it would stop working from just being in my truck. From my knowledge it was never dropped or bumped heavily or anything, at least recently.
I guess it is possible something just burned up inside, that would be inconvenient, I've got to look up if its still in warranty. I love the size and performance of this thing.
Thanks for replying, hopefully more to come.
Still can't get it to work, same issues as above. I let the battery fully die which took about 2+weeks from the initial post. Which is to say that eventually the back and recent buttons stopped lighting up. I recharged it and after holding the power button for a few seconds the same condition repeated itself. If I touch the power button or home button the back and recent button back lights turn on for a moment and turn off again. There is no other indication of life. I would assume if it was just a dead screen then I should feel it try to turn on.
If I had to replace parts which ones should I look at first? Probably just the main board?
Buy a new one. Send yours in as defect. Done.
erase111
I see that is an old thread, but I having the same issue to a certain degree. The screen goes dark, but I can see the back light. If I play around enough times, (pressing the back and process button, before pressing the sensor button... Sometime, pressing the volume buttons and back button before pressing the sensor button), everything goes back to normal. Of course, it some random time, even when I am reading a web page or some other activity, it will go back to black.
So has anyone figured out what this issue actually might be? I thought maybe it was an issue with the ROM I was using, so I just moved over to LineageOS 16, but the problem still continues!