Recently, I've installed [JB] Ultimate N7000 XXLT4 JellyBean 4.1.2 v6 ROM. Then, again flushed stock DDLSC and rooted with philz 5.03 stock kernel.
Problem is, whenever an app is not responding, My phone reboots and then stuck on "Samsung" load screen (startup boot screen).
I'm a android app developer. Whenever I compiled and run app on my phone, if there is an error/ANR, my phone firstly hanged, than few minutes later reboot and stuck on load screen.
I never have this problem on stock ICS ROM.
here are some several times logcat errors I copied.
url-> pastebin.com/ayYS0pLi
Related
Hi. My last firmware was from late 2010 (it was a custom if it matters).
Now I decided to update to 4.0.4 and selected a CM9 firmware. I did as usually, made a backup, factory resetted and cleared cache.
Then after I updated to that new firmware my phone got stuck in the first boot screen where it says like "Samsung GT-I9000" etc.
I wasn't able to get to recovery mode but I managed to get to download mode and I flashed a 2.3.6 firmware which I believe was stock (got it from sammobile.com). However it didn't help as now I'm stuck in endless boot animation where the "S" flashes and sometimes it just starts the animation again but nothing else happens .
I tried installing another kernel, then installing the CM9 firmware but then it just boots endlessly to recovery mode.
Now I have the stock 2.3.6 firmware installed with nothing else, still can't get past the boot animation. Anyone could tell me what to do or is my phone a brick?
Is your phone rooted? Do you have cwm?
Sent from my GT-I9000 using xda app-developers app
Freszone said:
Hi. My last firmware was from late 2010 (it was a custom if it matters).
Now I decided to update to 4.0.4 and selected a CM9 firmware. I did as usually, made a backup, factory resetted and cleared cache.
Then after I updated to that new firmware my phone got stuck in the first boot screen where it says like "Samsung GT-I9000" etc.
I wasn't able to get to recovery mode but I managed to get to download mode and I flashed a 2.3.6 firmware which I believe was stock (got it from sammobile.com). However it didn't help as now I'm stuck in endless boot animation where the "S" flashes and sometimes it just starts the animation again but nothing else happens .
I tried installing another kernel, then installing the CM9 firmware but then it just boots endlessly to recovery mode.
Now I have the stock 2.3.6 firmware installed with nothing else, still can't get past the boot animation. Anyone could tell me what to do or is my phone a brick?
Click to expand...
Click to collapse
Hmm... Which firmware u flashed?
If my post helped, don't mind hitting THANKS
you have to flash a the JVU. are you sur you didn't flash the JW4 !!
Freszone said:
Hi. My last firmware was from late 2010 (it was a custom if it matters).
Now I decided to update to 4.0.4 and selected a CM9 firmware. I did as usually, made a backup, factory resetted and cleared cache.
Then after I updated to that new firmware my phone got stuck in the first boot screen where it says like "Samsung GT-I9000" etc.
I wasn't able to get to recovery mode but I managed to get to download mode and I flashed a 2.3.6 firmware which I believe was stock (got it from sammobile.com). However it didn't help as now I'm stuck in endless boot animation where the "S" flashes and sometimes it just starts the animation again but nothing else happens .
I tried installing another kernel, then installing the CM9 firmware but then it just boots endlessly to recovery mode.
Now I have the stock 2.3.6 firmware installed with nothing else, still can't get past the boot animation. Anyone could tell me what to do or is my phone a brick?
Click to expand...
Click to collapse
Firstly I don't think its bricked if you can access download and recovery mode ....
I recently did the following to fix everything wrong with my phone.
I flashed to a stock rom (gingerbread 2.3.3)using Odin, then rooted my phone again. Then I flashed darky's rom (GB 2.3.6). After that i flashed tiramislim 9 (ICS 4.0.4) & that worked out for me. Hope i helped.
I was installed CustoNexus rom with CWM. I instaled and always shown "unfortunately, the process com.android.phone has stopped"
I started CWM again and instaled 4.1.2 RD MIUI rom v 0.2 alpha by Dexter_nlb same message appear here.
Now I'm stuck with no cannection with pc to restore my phone and cant start CWM to restore prev rom.
What can I do? I saw posts no one had this problem.
guys a had some really bad time running into this faulty ICS ROM and den by fault bricking it.
then after searching for hours i found this post by forest1971 here http://forum.xda-developers.com/showthread.php?p=26285877for unbricking GNOTE by repatitioning the internal sdcard after finding faulty bricked blocks.
as i could not reboot into recovery.
so i used one of the PIT files provided in his post and flashed it via PC ODIN to revive my bricked GNOTE.
later i was able to get into recovery.
then i thought of flashing STOCK jelly bean DDLSC 4.1.2 ROM and i was able to flash it easily via PC ODIN.
then i phone rebooted and got stuck on samsung jelly bean BOOT screen.
i waited for hours for it to start(pass that boot screen) but all in vain.
SO now i ma stuck at the BOOT screen so can any1 please help me and tell me what to do now??
first try flash safe kernel, use philz kernel, flash it from recovery(.zip) or pc odin(.tar) reboot recovery, and make full wipe..reboot your phone..
if still stuck on bootloop.
maybe TW Rom is to big for you now, try flash Slim Bean
Just make sure you have safe kernel+cwm first.
zai89 said:
first try flash safe kernel, use philz kernel, flash it from recovery(.zip) or pc odin(.tar) reboot recovery, and make full wipe..reboot your phone..
if still stuck on bootloop.
maybe TW Rom is to big for you now, try flash Slim Bean
Just make sure you have safe kernel+cwm first.
Click to expand...
Click to collapse
first of all thanks for replying that fast..
and second thing is that i am not in a bootloop instead my phones just stuck at the samsung BOOT screen.
somehow if i keep rebooting again and again i get to pass that BOOT screen but then my phone would get stuck at "android is upgrading" screen or it pass that too then it would freeze at those startup wizard configuration mostly at the wifi page.
Also i did try to install paranoid 3.15 and had the same result (stuck at bOOT screen) so i think i mean i think (not much of an expert in this kind of stuff) the size is not a problem.
and also i have flashed this safe PHILZ kernel for DDLSC which i am using now.
prince4p91 said:
first of all thanks for replying that fast..
and second thing is that i am not in a bootloop instead my phones just stuck at the samsung BOOT screen.
somehow if i keep rebooting again and again i get to pass that BOOT screen but then my phone would get stuck at "android is upgrading" screen or it pass that too then it would freeze at those startup wizard configuration mostly at the wifi page.
Also i did try to install paranoid 3.15 and had the same result (stuck at bOOT screen) so i think i mean i think (not much of an expert in this kind of stuff) the size is not a problem.
and also i have flashed this safe PHILZ kernel for DDLSC which i am using now.
Click to expand...
Click to collapse
reboot in download mode if you can and use pc odin to flash the ASOP ROM like supernexus 2.0 http://forum.xda-developers.com/showthread.php?t=2076697
this may resolve the issue.
Mayank Chandwani said:
reboot in download mode if you can and use pc odin to flash the ASOP ROM like supernexus 2.0 http://forum.xda-developers.com/showthread.php?t=2076697
this may resolve the issue.
Click to expand...
Click to collapse
yes i can reboot into download mode.
but the thing is that i have flashed this stock DDLSC ROM and i was able to make it run by rebooting system 3-4 times
but later on it would freeze after like 10-20 seconds and then i have to reboot the system again and
the ROM will start but again freezes within 10-20 seconds of startup.
so please help me to get rid of dese freezes.
PS- ill try flashing this supernexus 2 ROM lets see what happens
please help me in fixing my phone, i flashed paranoid androoid rom 4.1.2 with kowalski kernel from tonyps thread recently, i downloaded cf3d and tried to install the drivers. however the phone does not boot up completely anymore(shows normal lg icon and then shows two small lg icons and gets stuck there forever) and i cannot boot into cwm
atd124125 said:
please help me in fixing my phone, i flashed paranoid androoid rom 4.1.2 with kowalski kernel from tonyps thread recently, i downloaded cf3d and tried to install the drivers. however the phone does not boot up completely anymore(shows normal lg icon and then shows two small lg icons and gets stuck there forever) and i cannot boot into cwm
Click to expand...
Click to collapse
Thats because CF3D isnt supported on Android 4.0 and above. Reflash the ROM and it should be fine again
hey guys...
recently i had some problems with my device and i had to change chip of my internal memory.
after that they have installed 4.0.3 Rom with N7000XLPT kernel. as usual i tried to install JB 4.1.2 Samsung's official Rom with odin, installation passed, everything seemed to be ok, but when booting, it looped on samsung logo over and over.
i had to install 4.0.3 oncce again. so does anyone know what is the problem?
Wipe Your data before flashing update.
Sent from note, a phone like never before