Related
Update 14/12/2011
Watch it in action here http://www.youtube.com/watch?v=OojU0REhrL0.
Update 13/12/2011
bLED kernel module updated to 0.2. Should fix the random crash occuring. Not sure how many of you guys checked the dmesg and found out plenty of stack traces on 0.1
Grab your copy bled-0.2-lkm-update.zip and flash with Clockworkmod. Leave the bled-0.1.apk installed as is, no update is available for that yet
Original post
bLED touchkey button notification for GALAXY Note, version 0.1-EA
The wait is over.
Introducing bLED, my version of blinking notification through touchkey button LEDs. It's still on its early access version 0.1, and there are still some known inconveniences or bugs. Please refer to the known problems section for more info.
After applying the patch and installing the apk, your GALAXY Note will blink any notification found on the status bar, including missed calls and (TouchWiz) SMS
This MOD has been tested on KKA kernel, but it should support all stock kernels (seems like none of custom kernels are supported). But if anything happens, you can restore with the nandroid backup of (just) your system image.
eybee1970 said:
ok, unfortunatly this Mod works with none of newer FM- and Abyss-Kernels....so we have to wait for the devs implementing stock touchkey drivers.
For all ROCKET ROM Users: of course you can switch to any CF-Root Kernel and this Mod will work - but you'll lose important init.d-tweaks if you do so, cause none of chainfires kernels support init.d-scripting
Click to expand...
Click to collapse
I could be wrong, it could possibly be another issue rather than stock touchkey driver.
angelom said:
I entered the stock touchkey drivers but bled still does not work.
At this point I do not think it's a driver issue.
And then FM 1.4 does not have the modified drivers
Click to expand...
Click to collapse
Prerequisites
- You'll need a clockworkmod-enabled GALAXY Note. Some advanced users can also load the kernel module by him/herselves.
Installation
0) Do nandroid backups!
Will not held responsible for bricking your phone if you don't backup first
1) Install the MOD
1.a) Download the update.zip (updated to bled-0.2-lkm-update.zip) and copy over to your SD card
1.b) Reboot in CWM to flash the update.zip. Go to "install zip from sdcard", "choose zip from sdcard", navigate and select the bled-0.2-lkm-update.zip.
1.c) Power off the phone, and start it again (obviously)
2) Install the bLED accessibility service
2.a) Go to "Settings", "Applications". Tick on "Unknown Sources" option.
2.b) Download bled-0.1.apk and install it on your phone. Don't look for it afterwards on your drawer menu as it does not contain real Activity-based application.
2.c) Go to "Settings", "Accessibility". Tick "Accessibility" and "bLED". Just ignore the warning when ticking "bLED", as I'm not interested on your personal details
Lock your phone. Have missed calls, SMSes, Whatsapp messages, GMail, whatever. They're all going to be blinked by bLED
Known issue
- Duration of blinking is currently limited to 15 minutes
- There will be several seconds of delay before it will blink sms and missed calls. It happens due to the currenlty implemented notification logic. More of a workaround instead of elegant solution. Hope will have better logic for next releases on handling them.
- There are still some mutex locking bugs on KKA kernel. Very ironic, there seems to be some struggle to support PMIC on the currently best SoC in the world, by looking at the kernel codes.
Enjoy
apk link dosen't work!
Let´s try it out
yeahhhh....great man!!!
madguylb said:
apk link dosen't work!
Click to expand...
Click to collapse
Anyone with apk link problem as well?
Sent from my GT-N7000 using Tapatalk
watch_mania said:
Anyone with apk link problem as well?
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
no, works...
Did you discover any negative side effects on e.g. battery life?
eybee1970 said:
no, works...
Did you discover any negative side effects on e.g. battery life?
Click to expand...
Click to collapse
Well I just got the kernel module working by last night and the accessibility service earlier today. Not enough time to tell yet
Will try blinking it tonight and see how much battery it would drain
But you can always disable the bLED accessibility service when you don't need it
Sent from my GT-N7000 using Tapatalk
THANK YOU MAN !
This was such an anoying point that made me not love my Note !
Please keep developing, you are doing great work for all Note Users !
I hope MIUI and Cyanogen will make a Note-Port soon and integrate your LED Notification MOD
Hi guys I've installed but doesn't seem to be working I'm on rocket ROM and antes kernel and using go SMS can anyone help
brockyneo said:
Hi guys I've installed but doesn't seem to be working I'm on rocket ROM and antes kernel and using go SMS can anyone help
Click to expand...
Click to collapse
try switching to latest Abyss Kernel 2.0
eybee1970 said:
try switching to latest Abyss Kernel 2.0
Click to expand...
Click to collapse
Hi sorry I should of said I'm already on the abyss 2.0
reset
After installing everything looked ok in 5 minutes there was reset the phone :-(.
But otherwise good
Main concern:
How is the power management on this ?
PATLEN said:
After installing everything looked ok in 5 minutes there was reset the phone :-(.
But otherwise good
Click to expand...
Click to collapse
Which kernel and version are you using? Yes there circumstances where the mutex crashes the system. It happened once on my KKA, but never afterwards. I think I have to consider some other ways for doing semaphores for bLED
brockyneo said:
Hi sorry I should of said I'm already on the abyss 2.0
Click to expand...
Click to collapse
Ok the Abyss kernel had BLN mod patched on the melfas touchkey driver. You needs kernels with stock melfas touchkey driver, left intact. Seems that BLN is not functional yet on the Abyss kernel anyway? Maybe you can ask him to revert to original melfas touchkey driver from Samsung
i use this kernel
http://forum.xda-developers.com/showthread.php?t=1331784
directly:
http://forum.xda-developers.com/attachment.php?attachmentid=791221&d=1321958928
PATLEN said:
i use this kernel
http://forum.xda-developers.com/showthread.php?t=1331784
directly:
http://forum.xda-developers.com/attachment.php?attachmentid=791221&d=1321958928
Click to expand...
Click to collapse
That one is stock ones right? Then I believe it should work. But please post the results here
waste of time. It does not work!
ok, unfortunatly this Mod works with none of newer FM- and Abyss-Kernels....so we have to wait for the devs implementing stock touchkey drivers.
For all ROCKET ROM Users: of course you can switch to any CF-Root Kernel and this Mod will work - but you'll lose important init.d-tweaks if you do so, cause none of chainfires kernels support init.d-scripting
vuhongduong said:
waste of time. It does not work!
Click to expand...
Click to collapse
Well at least I wasted much more time than you did! But guess what, it worked on mine
Hi there. New version) now, it has CWM with TWRP together!
To access TWRP - press "power off" button when the pink led appears
To access CWM - press "power off" button when the red led appears (it's after pink one)
Download - Link
Old version with CWM only - download: Link
Credits:
NuriJ - for his TWRP kernel
CWM and TWRP dev teams - for obvious reasons
For the V only? or will it work on other devices?
T/TX etc..
gregbradley said:
For the V only? or will it work on other devices?
T/TX etc..
Click to expand...
Click to collapse
only V. do u need it for T/TX too?)) if so, then send me kernel.sin files from both of the devices i'll try
vdsirotkin said:
only V. do u need it for T/TX too?)) if so, then send me kernel.sin files from both of the devices i'll try
Click to expand...
Click to collapse
will do...many thanks, I will send them in a bit, just tied up now...
do not do that in a hurry) i won't be able to do that before tomorrow's evening (i live in Moscow, it's GMT +4 here...)
Nice work!
spida_singh said:
Nice work!
Click to expand...
Click to collapse
i'm glad to hear that from u, man)
Sv: [Kernel][JB]Stock Kernel + CMW 6
Good job in implementing recovery Did you achieve root yet?
Just tried it, a blue light does not appear, instead it's a pink LED, tried volume up and down, could not get into recovery.
Any ideas?
Re: [Kernel][JB]Stock Kernel + CMW 6
spida_singh said:
Just tried it, a blue light does not appear, instead it's a pink LED, tried volume up and down, could not get into recovery.
Any ideas?
Click to expand...
Click to collapse
But it says in the op to press the power button. Did you?
Sent from my Nexus 7
bjohv052 said:
But it says in the op to press the power button. Did you?
Sent from my Nexus 7
Click to expand...
Click to collapse
Its been a long night, lol, cheers, it works fine!
Re: [Kernel][JB]Stock Kernel + CMW 6
Great job! Been waiting for this. Now I can test out AC!D mod and the gaming mod.
Sent from your backyard...
Slender watches what you do...
Unlocked bootloader only, right?
demon1010 said:
Unlocked bootloader only, right?
Click to expand...
Click to collapse
Yes, to flash different kernels you need an unlocked bootloader.
By the way this works on unlocked bootloader.
-SlenderMan- said:
By the way this works on unlocked bootloader.
Click to expand...
Click to collapse
yep, and ONLY on unlocked BL.
NuriJ said:
Good job in implementing recovery Did you achieve root yet?
Click to expand...
Click to collapse
it's not a problem) just flash su.zip using CWM and u'll get it)
Awesome job. Thanks for the CWM!
Next in the waitingline now is the 4.2 release and ofcourse. Custom ROMs
-SlenderMan- said:
By the way this works on unlocked bootloader.
Click to expand...
Click to collapse
You serious bro?
Is anyone having issues mounting the external SD card or charging with this kernel? It just does not get recognized.
For some reason, after flashing, my phone does not connect to the laptop, when i fastboot a stock .490 kernel, it's ok.
Hi guys
I'm probably not the only one that has some remarks with the vibration of the HTC One.
When I am on the lowest volume setting, other people can hear my phone vibrate out of my pocket.
It's even more horrible that I can only head the vibration instead of the noticiation sound when I recieve a text.
Does anybody have a solution to fix this issue or do I have to live with it?
MattProductions said:
Hi guys
I'm probably not the only one that has some remarks with the vibration of the HTC One.
When I am on the lowest volume setting, other people can hear my phone vibrate out of my pocket.
It's even more horrible that I can only head the vibration instead of the noticiation sound when I recieve a text.
Does anybody have a solution to fix this issue or do I have to live with it?
Click to expand...
Click to collapse
You need a custom kernel like Elementalx, Faux with the support at this mod and the Faux app for edit the density of the vibration
And I guess I'll lose all the data when installing a custom kernel?
MattProductions said:
And I guess I'll lose all the data when installing a custom kernel?
Click to expand...
Click to collapse
You won't lose anything if your phone is already modded.
If it isn't already modded you will lose data unlocking the bootloader.
Well, my phone has an unlocked bootloader + root access.
So that means that I can freely change the kernel without any consequences?
MattProductions said:
Well, my phone has an unlocked bootloader + root access.
So that means that I can freely change the kernel without any consequences?
Click to expand...
Click to collapse
Yup, you can flash any kernel compatible with your android version and phone version
Phone version, how do you mean?
Is that just the HTC One (as phone version) or the UL/Sprint/ATT version?
MattProductions said:
Phone version, how do you mean?
Is that just the HTC One (as phone version) or the UL/Sprint/ATT version?
Click to expand...
Click to collapse
For example, don't flash a Sprint kernel on a GSM phone
Allright, awesome!
Guess I'll be flashing kernels today
MattProductions said:
Allright, awesome!
Guess I'll be flashing kernels today
Click to expand...
Click to collapse
Good luck
I just flashed the ElementalX kernel (http://forum.xda-developers.com/showthread.php?t=2249774)
But apparantly, the vibration didn't reduce (or I coudn't find an option to do it).
Is that kernel able to modify the intensity?
MattProductions said:
I just flashed the ElementalX kernel (http://forum.xda-developers.com/showthread.php?t=2249774)
But apparantly, the vibration didn't reduce (or I coudn't find an option to do it).
Is that kernel able to modify the intensity?
Click to expand...
Click to collapse
I remeber that i edited it with Faux app.
You can try with it.
I can't seem to find a kernel for the 4.3 Sense version.
Is it just me over doesn't it exist?
http://rootzwiki.com/topic/100338-k...intelliplugdfsyncfauxsounds2wlinux-34-aug-15/
Nevermind, guess I found it
http://forum.xda-developers.com/showthread.php?t=2255900
***Easier method*** ***NO ROOT***
If you want to get rid of vibration completely, but without putting your phone on silent, just use App Ops! You need something to launch the activity, there are App-ops launchers in Play Store or you could just use a Tasker task. Once you're in, just go through all your apps and untick the "Vibration" permission!
No root required!!!
<<< Please say thanks if I was of help!
Hi, my i9000 has broken homebutton, how can I enable soft keys (navbar) to replace touch keys and phisical home button?
I want to stay with original cm11 rom if possible, is there a method without flashing unofficial cm11 roms?
Many thanks in advance
russel51
russel51 said:
Hi, my i9000 has broken homebutton, how can I enable soft keys (navbar) to replace touch keys and phisical home button?
I want to stay with original cm11 rom if possible, is there a method without flashing unofficial cm11 roms?
Many thanks in advance
russel51
Click to expand...
Click to collapse
try google it you will find your answer
Sent from my GT-I9000 using XDA Free mobile app
ayed78 said:
try google it you will find your answer
Sent from my GT-I9000 using XDA Free mobile app
Click to expand...
Click to collapse
already done it, there's no specific thread for i9000 and the solutions with edit system files found for i9300 doesn't apply there, can you point me to an i9000-compatible guide?
This section is for posting things you developed. Not for help.
russel51 said:
Hi, my i9000 has broken homebutton, how can I enable soft keys (navbar) to replace touch keys and phisical home button?
I want to stay with original cm11 rom if possible, is there a method without flashing unofficial cm11 roms?
Many thanks in advance
russel51
Click to expand...
Click to collapse
Add
qemu.hw.mainkeys=0
to the end of build.prop - that should sort it out for you. If you have real problems doing that then I can let you have a zip to flash through recovery that does it for you. You can find this info in XDA but you do need to take some time to search.
sanguinesaintly said:
Add
qemu.hw.mainkeys=0
to the end of build.prop - that should sort it out for you. If you have real problems doing that then I can let you have a zip to flash through recovery that does it for you. You can find this info in XDA but you do need to take some time to search.
Click to expand...
Click to collapse
Thanks, it worked well. Is this permanent or do I have to repeat the process at every Milestone update?
You'll have to repeat it after flashing a new nightly or milestone.
I tried this mod ONLY on XtreStoLite for G920F model.
If you wanna test this on other carriers using same rom, please BACKUP first.
If something goes wrong, just RESTORE!
Let me be very clear: I am not responsible if your device explodes, your dog runs away, your wife leaves you for your dog, the shoe factory shuts down and
you can't get your favourite shoes anymore or anything else that may or may not happen after using this script. Please make a FULL BACKUP, possibly from TWRP. You have been warned.
Click to expand...
Click to collapse
Hi guys, I edited the "framework-res.apk" file of XtreStoLite ROM adding Ambient Display feature like on Nexus (Android 5.0+). Surely it works on G920F, tested personally, if you wanna try on other S6 just try yourself.
I followed this guide. Credits to him.
///INSTALL:
- Flash the zip "AmbientDisplay-vX.X"
- Reboot
///UNINSTALL:
- Flash the zip "framework_restore"
- Reboot
Simple as it looks.
///BUGS:
- Gyroscope and proximity sensor not working for ambient display
- Touchscreen not working when screen fades (have to press power or home button first)
- Screen wake animation doesn't work (no fade)
- On edge model night clock won't work
- Every 3 dot menu animation will present a sort of lag/no animation
- Not working properly with Samsung "Good Lock" UI
///DOWNLOAD:
Each version I provide will be compatible ONLY with the one I write (example: ambient v3.3 --> xtrestolite v3.3)
- v3.3 installer
- v3.3 uninstaller
- v3.3.1 installer
- v3.3.1 uninstaller
///HOW IT WORKS:
- See attachments
Will it work if I pick the phone from pocket or from a tabel... or like the one from edgar?
Whats the battery consumption from this?
hasdroid said:
Will it work if I pick the phone from pocket or from a tabel... or like the one from edgar?
Click to expand...
Click to collapse
The screen fades but not works with gyroscope or proximity sensor, it just enables parts of code that Samsung deleted
Abdl said:
Whats the battery consumption from this?
Click to expand...
Click to collapse
Regular for me, not a problem
TENN3R said:
The screen fades but not works with gyroscope or proximity sensor, it just enables parts of code that Samsung deleted
Regular for me, not a problem
Click to expand...
Click to collapse
I understand... thank you ?☺
Works great! battery life won't be probably affected too much if not at all. Finally something satisfying on xda
Hmm there should be a bug using this mod for only those who has Edge . Night clock won't work by flashing this
Sent from my SM-G935F using Tapatalk
Repulsa said:
Hmm there should be a bug using this mod for only those who has Edge . Night clock won't work by flashing this
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Yeah and the lock screen wake animation not working too... menu animation too ?
PRESS THANKS BUTTON IF I HELPED YOU..??
Thanks for that feature, but some options to set the period and the time interval of the notifications would be nice.
Touchscreen is not working on ambient diyplay
Hi all, where can I activate this feature after having flashed the .zip?
downloading and will give it a try.
will this work on any other rom?
morostep said:
will this work on any other rom?
Click to expand...
Click to collapse
Im guessing, nope...
btw looking good but for now Im using Good Lock app and its not working properly with it.
peace \/
Can you make it for stock too?
ALBERTO9721 said:
Hi all, where can I activate this feature after having flashed the .zip?
Click to expand...
Click to collapse
Once you flash the zip it enables automatically, no "on-off" button.
sieerra said:
Can you make it for stock too?
Click to expand...
Click to collapse
There are lots of versions of stock rom, lots of different firmwares and I can't download every single firmware for extracting, decompile and recompile framework. So I just limit this mod for XtreStoLite.
Obliviously you can try adding yourself following the guide I linked in OP.
TENN3R said:
There are lots of versions of stock rom, lots of different firmwares and I can't download every single firmware for extracting, decompile and recompile framework. So I just limit this mod for XtreStoLite.
Obliviously you can try adding yourself following the guide I linked in OP.
Click to expand...
Click to collapse
I understand, thank you.
TENN3R said:
Once you flash the zip it enables automatically, no "on-off" button.
Click to expand...
Click to collapse
Thank you, now I've seen it
Will this work on g925f