Hi, i recently installed this http://forum.xda-developers.com/showthread.php?t=2212254 rom. After that i am experiencing touch problems like after opening dialer numbers are getting pressed on their own and its getting hard to unlock my X8. I tried several roms after that but still no luck. I searched different threads but no luck. Now i am on stock eclair, but still the problem is as it was before. Any suggestion will be welcome.
[email protected] said:
Hi, i recently installed this http://forum.xda-developers.com/showthread.php?t=2212254 rom. After that i am experiencing touch problems like after opening dialer numbers are getting pressed on their own and its getting hard to unlock my X8. I tried several roms after that but still no luck. I searched different threads but no luck. Now i am on stock eclair, but still the problem is as it was before. Any suggestion will be welcome.
Click to expand...
Click to collapse
flash the stock firmware 2.1
download from my signature
100% work
BlackRabbit1703 said:
flash the stock firmware 2.1
download from my signature
100% work
Click to expand...
Click to collapse
Thanks for the reply. I am already on stock firmware, but it didn't help.
remove the modules of the fake dual touch, it maybe is the problem
Sent from Rikki Six's muffin
Eren Jaeger said:
remove the modules of the fake dual touch, it maybe is the problem
Sent from Rikki Six's muffin
Click to expand...
Click to collapse
Thnks. As i am already on stock eclair, there will be no fake dual touch i guess.
Is your bootloader unlocked? Try flashing some other kernel.
What digitizer is it?
sgt. meow said:
Is your bootloader unlocked? Try flashing some other kernel.
What digitizer is it?
Click to expand...
Click to collapse
Yeah..bootloader is unlocked..currently on nAa 14..tried stock eclair also...but nothing happened...and have cypress digitizer
Is there any sort of moisture on the screen?
sgt. meow said:
Is there any sort of moisture on the screen?
Click to expand...
Click to collapse
There isn't any kind of moisture but i use screen guard...is that the problem??
If that hasn't caused any problems before, it shouldn't start now. What digitizer is it - cypress or synaptics?
sgt. meow said:
If that hasn't caused any problems before, it shouldn't start now. What digitizer is it - cypress or synaptics?
Click to expand...
Click to collapse
cypress digitizer...now using nAa jb 05 kernel...but problem is same as before...
Oops. Dind't see the cypress bit before. Sorry! How long has this issue persisted? Can you try and check if it works normally without the screen guard?
sgt. meow said:
Oops. Dind't see the cypress bit before. Sorry! How long has this issue persisted? Can you try and check if it works normally without the screen guard?
Click to expand...
Click to collapse
after installing the rom mentioned in the first post
Related
Hi,
Since yesterday I have a strange red message on top of my screen.
It goes away when I restart the phone but gets back every time I make a call. I find this very strange and have looked over the internet to see if someone else have this but haven't found anything.
I am attaching an image of it. As you can see it says T, S, P and ALL and some values.
Do you have any idea what this could be and how I get rid of it once and for all?
looks as if it is a kernel of modding related problem, tell us more about the ROM and Kernel you have flashed!
sphinx02 said:
looks as if it is a kernel of modding related problem, tell us more about the ROM and Kernel you have flashed!
Click to expand...
Click to collapse
Thanks for answering!
It's a Stockrom, 2.3.3.
2.6.35-7 is the kernel and Gingerbread XWJVB
olskar said:
Thanks for answering!
It's a Stockrom, 2.3.3.
2.6.35-7 is the kernel and Gingerbread XWJVB
Click to expand...
Click to collapse
ahaha
Very interesting, this reminds me once my laptop had a error and said it had like 2800000000 MB on ram.
I would suggest to reflash your rom. try using stock rom from samfirmware / sammobile
Id rather not flash it again
olskar said:
Id rather not flash it again
Click to expand...
Click to collapse
I've been thinking about this since yesterday... And I think that red message could be part of the wallpaper???
I am getting this red bar on my i9100 as well...
gtluis said:
I've been thinking about this since yesterday... And I think that red message could be part of the wallpaper???
Click to expand...
Click to collapse
No, its not
I am getting this red bar on my i9100 as well...
Click to expand...
Click to collapse
Do you have the same rom? For how long have you had it? Do you remember when it first showed up?
I got hardbrick after i installed this bootanimation (http://forum.xda-developers.com/showthread.php?t=1064611) with cwm. I feel just the vibration when i try turn on the phone.
I tried repair the phone with update service but i cant move into flashmode.
did you have any idea to repair my phone?
This is very important me,this is my only phone.
My rom i used is ixperia 1.9.0 with alfs kernal v8a.
Sorry for my bad english..
mati123 said:
I got hardbrick after i installed this bootanimation (http://forum.xda-developers.com/showthread.php?t=1064611) with cwm. I feel just the vibration when i try turn on the phone.
I tried repair the phone with update service but i cant move into flashmode.
did you have any idea to repair my phone?
This is very important me,this is my only phone.
My rom i used is ixperia 1.9.0 with alfs kernal v8a.
Sorry for my bad english..
Click to expand...
Click to collapse
lol dude....charge battery and follow steps in PCC,your phone is softbricked or empty battery...
fotak-x said:
lol dude....charge battery and follow steps in PCC,your phone is softbricked or empty battery...
Click to expand...
Click to collapse
maybe not even softbrick,it just need charging
stamatis said:
maybe not even softbrick,it just need charging
Click to expand...
Click to collapse
true man:good:
mati123 said:
I got hardbrick after i installed this bootanimation (http://forum.xda-developers.com/showthread.php?t=1064611) with cwm. I feel just the vibration when i try turn on the phone.
I tried repair the phone with update service but i cant move into flashmode.
did you have any idea to repair my phone?
This is very important me,this is my only phone.
My rom i used is ixperia 1.9.0 with alfs kernal v8a.
Sorry for my bad english..
Click to expand...
Click to collapse
really?
it can never hardbrick your phone. it is softbricked. do what fotak and stamatis said...
CnC-ROCK said:
really?
it can never hardbrick your phone. it is softbricked. do what fotak and stamatis said...
Click to expand...
Click to collapse
Yup.....
Do what CnC says
sent from my W8 using client-server technology
im not stupid..
i tried do this with another battery
i was busy to write in good english and i forgot to remaind this.
and i cant charge my battery
i flashed many kernals and roms and now i build one.
Too bad you dismiss so quickly
My xperia tx no show anything after today call and the screen is gray. The phone is receive calls and SMS. Even touch screen working but it is gray and don't show anything.
Updating the software with sus but the fault could not solve.
HTxperia said:
My xperia tx no show anything after today call and the screen is gray. The phone is receive calls and SMS. Even touch screen working but it is gray and don't show anything.
Updating the software with sus but the fault could not solve.
Click to expand...
Click to collapse
is it rooted? and has unlocked boot loader
.
romeoofair said:
is it rooted? and has unlocked boot loader
Click to expand...
Click to collapse
Yes rooted and unlocked bootloader
HTxperia said:
Yes rooted and unlocked bootloader
Click to expand...
Click to collapse
did you try with flash tool?
romeoofair said:
did you try with flash tool?
Click to expand...
Click to collapse
yes But Without result
did not go gray screen
HTxperia said:
yes But Without result
did not go gray screen
Click to expand...
Click to collapse
thats wierd. i dont think it a software issue bro. flashing the rom usually fix this issue
romeoofair said:
thats wierd. i dont think it a software issue bro. flashing the rom usually fix this issue
Click to expand...
Click to collapse
Time ago I had a problem and inverted screen when you install any version of Android remain the screen upside down but painstakingly found the solution was not in Hardwear problem but a software problem
Until this problem is software and I hope that I find a solution
Thank you very much my friend to try to help
HTxperia said:
Time ago I had a problem and inverted screen when you install any version of Android remain the screen upside down but painstakingly found the solution was not in Hardwear problem but a software problem
Until this problem is software and I hope that I find a solution
Thank you very much my friend to try to help
Click to expand...
Click to collapse
ya even i had that issue but i fixed it. i m sure your problem is a software issue but i m not aware of the proper solution
any help xda ??
Hello...
I flashed SONY T custom ""Rom][4.3][T][Ultimate BlackXT][v3.1]""" rom for my SONY V..
when I rebooted it didnt turn on then i flashed an official rom..
when i turn it on the color of screen changed and became white ...
touch is ok but the colors mixed....
CAN U HELP ME PLS.....
sry for bad ENG..
Install ONLY rom for V
Now you must install a new FTF via Flashtool.
Follow these instructions and download FTF here: http://forum.xda-developers.com/showthread.php?t=2648320
Choose 9.1.A.1.140 (android 4.1.2), so you can root and install recovery again
istux said:
Install ONLY rom for V
Now you must install a new FTF via Flashtool.
Follow these instructions and download FTF here: http://forum.xda-developers.com/showthread.php?t=2648320
Choose 9.1.A.1.140 (android 4.1.2), so you can root and install recovery again
Click to expand...
Click to collapse
Thanks but i flashed 2 or 3 times with different stock roms but i have same problem...
dont u think its just about white balance or sth....
skynews47 said:
Thanks but i flashed 2 or 3 times with different stock roms but i have same problem...
dont u think its just about white balance or sth....
Click to expand...
Click to collapse
Is your bootloader unlocked?
skynews47 said:
Thanks but i flashed 2 or 3 times with different stock roms but i have same problem...
dont u think its just about white balance or sth....
Click to expand...
Click to collapse
Sorry, you're right, I didn't read well what you wrote.
Are you sure you did clean installation? I mean the wipe voices before flashing with Flashtool, were all selected?
There's a thread for that incident (inverted lcd) that happens when you flash incompatible kernel and tried to reboot. It has something to do with the display driver
St.Jimmy90 said:
Is your bootloader unlocked?
Click to expand...
Click to collapse
No its lock mate...
istux said:
Sorry, you're right, I didn't read well what you wrote.
Are you sure you did clean installation? I mean the wipe voices before flashing with Flashtool, were all selected?
Click to expand...
Click to collapse
Thats ok..yes i did all u said...it's not my first time...
everything is ok just the color
harrymason37 said:
There's a thread for that incident (inverted lcd) that happens when you flash incompatible kernel and tried to reboot. It has something to do with the display driver
Click to expand...
Click to collapse
U mean i should change the lcd????
there is no other way??
skynews47 said:
U mean i should change the lcd????
there is no other way??
Click to expand...
Click to collapse
No, you'll need to install the driver manually. Just search it here in xda
harrymason37 said:
There's a thread for that incident (inverted lcd) that happens when you flash incompatible kernel and tried to reboot. It has something to do with the display driver
Click to expand...
Click to collapse
Do you mean this one? http://forum.xda-developers.com/showthread.php?t=2604927
Yap
harrymason37 said:
No, you'll need to install the driver manually. Just search it here in xda
Click to expand...
Click to collapse
I found the post but couldn't follow the instructions .somehow didn't underestand...
can u explain in a simple way
Sorry I never tried it before
skynews47 said:
I found the post but couldn't follow the instructions .somehow didn't underestand...
can u explain in a simple way
Click to expand...
Click to collapse
Ask to people inside that thread, I bet they can be more useful than us
istux said:
Ask to people inside that thread, I bet they can be more useful than us
Click to expand...
Click to collapse
Hey guys.
I have same problem with display colors like few of us after wrong flashing XT rom on my XV. (downloaded bad zip) Just question, that thread for XTX about inverted display - its just about inverted display upside down - it has nothing to do with wrong colors right?
Colors totally ruined
harrymason37 said:
Colors totally ruined
Click to expand...
Click to collapse
Thats question or statement? So nothing can be done to repair display on my V?
This happens when you flash wrong kernel, the display drivers is ruined so the effect is inverted colors, there's a thread how to fix it but it's for Xperia Z1.
harrymason37 said:
This happens when you flash wrong kernel, the display drivers is ruined so the effect is inverted colors, there's a thread how to fix it but it's for Xperia Z1.
Click to expand...
Click to collapse
Thnx for your reply...
Can you post link to that thread since i can´t find it?
Well its for Z1 but process of flashing new driver should be similar or at least i can ask there...
I am on stock .157 not rooted. have no issues on the phone, but after maybe 2-3 days of usage, sensors wouldn't work (accelerometer, gyroscope, proximity). the screen wont turn off during calls , auto rotation wont work. Also in service tests, (*#*#service#*#*) all the values would be blank.
A restart will always fix these but I am still worried if this is a software issue. Any one else facing this issue ?
sruba209 said:
I am on stock .157 not rooted. have no issues on the phone, but after maybe 2-3 days of usage, sensors wouldn't work (accelerometer, gyroscope, proximity). the screen wont turn off during calls , auto rotation wont work. Also in service tests, (*#*#service#*#*) all the values would be blank.
A restart will always fix these but I am still worried if this is a software issue. Any one else facing this issue ?
Click to expand...
Click to collapse
Try reflashing your FTF and see if it gets fixed. But before doing this, take it to Sony before more disappointment if its under warranty.
TurokHunter47 said:
Try reflashing your FTF and see if it gets fixed. But before doing this, take it to Sony before more disappointment if its under warranty.
Click to expand...
Click to collapse
Not under warranty
Sent from my C6902
sruba209 said:
Not under warranty
Sent from my C6902
Click to expand...
Click to collapse
Then reflash your FTF, there are a lot of different FTFs on XDA.
Did you solve this issue???
Hello,
I also have the same issue with my Sony Xperia Z1.
Did you find the flashing ftf solve the problem??
Please help.
ebro52 said:
Hello,
I also have the same issue with my Sony Xperia Z1.
Did you find the flashing ftf solve the problem??
Please help.
Click to expand...
Click to collapse
Hi @ebro52
I havent tried flashing an ftf yet.. I dont have a laptop now. Before flashing an ftf i will try a factory wipe and see if that helps....will update
Sent from my C6902
sruba209 said:
Hi @ebro52
I havent tried flashing an ftf yet.. I dont have a laptop now. Before flashing an ftf i will try a factory wipe and see if that helps....will update
Sent from my C6902
Click to expand...
Click to collapse
@ sruba209
Tried doing that, but it gets solved temporary. The sensors don't show after some time.
I have this exact problem not sure which ftf would be my original bought from carphone warehouse
Did you solve this issue???
Did Any one found the solution for the problem yet??
I think I found a solution ... @ebro52
This problem only occurs when I leave the auto rotate off.
For the past few days I have kept the auto rotate on and didn't encounter any issue. After I disabled auto rotate, about 6 hrs later , all sensors stopped working.....
Still the issue is not solved??
I still have the problem. Tried keeping auto rotate on as well. So now moving to a custom rom mostly cm12 or based on it. Wil let you'll know if problem persist.
Ive had the problem on all roms have to reboot to get them working again and all sensors stop at the same time
Is there anyway to get a log and see what stops working and when?
My sensors do not work on reboot as well. They stop and start on there on. I am using sony stock right now. I will root the phone and see if I can have a log. Mean while has any one found a issue Please post.
ebro52 said:
My sensors do not work on reboot as well. They stop and start on there on. I am using sony stock right now. I will root the phone and see if I can have a log. Mean while has any one found a issue Please post.
Click to expand...
Click to collapse
currently on slimkat 4.4.4....no issues yet
Sent from my Z1
guys i have the exact same problem since replaced my lcd.
i tried many things: force shut down proximity sensor, changing rom(rooted,unrooted,cm,stock,different kernels),disabling xposed, and so on.
none software ways help!
seems no solution and a hardware failure
NiM72NiK said:
guys i have the exact same problem since replaced my lcd.
i tried many things: force shut down proximity sensor, changing rom(rooted,unrooted,cm,stock,different kernels),disabling xposed, and so on.
none software ways help!
seems no solution and a hardware failure
Click to expand...
Click to collapse
try slimkat....no issues yet
http://www.slimroms.net/index.php/d...951-slim-honami-4-4-4-build-9-0-official-8317
go for full slim gapps
Sent from my Z1
sruba209 said:
try slimkat....no issues yet
http://www.slimroms.net/index.php/d...951-slim-honami-4-4-4-build-9-0-official-8317
go for full slim gapps
Sent from my Z1
Click to expand...
Click to collapse
Greaat..thanks for the advice but is it totally working for You?!!
What kernel you are using?!
NiM72NiK said:
Greaat..thanks for the advice but is it totally working for You?!!
Click to expand...
Click to collapse
yes....but i have come back to stock rom today....just to see if the issue persists
Sent from my iPad using Tapatalk
sruba209 said:
yes....but i have come back to stock rom today....just to see if the issue persists
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Slimkat didn't fix my problem at all. Seems the reason of the problem is different for us. Btw is there any app that can reset or recalibrate the sensors?! Is this theory right that the lcd I replaced is none original and caused this problem and replacing an original one will solve the problem?!
Does anyone know where the sensor's are located the only one I've found is on headphone jack