Database Develop

re-lock before flash stock rom says HTC HOLIDAY SUPERGUIDE???

so HTC HOLIDAY SUPERGUIDE seems to say you need to relock your bootloader before you flash the stock ROM. I thought it would be the other way around???
HTC HOLIDAY SUPERGUIDE
http://forum.xda-developers.com/showthread.php?t=1416836
***(BEFORE YOU BEGIN)
- You MUST be on a stock ROM with the bootloader locked or re-locked
- If you are NOT locked/re-locked or you are on a custom ROM, then you MUST follow the following directions...
- Boot into H-Boot by powering off. Once off, power back on and hold VOL DOWN + POWER BUTTON, once in HBOOT go to "fastboot" and click the power button to select
- Download the WCXJB ROOT PACK zip from the bottom to your desktop and unzip it
- Inside the unzipped WCXJB ROOT PACK folder, hold SHIFT and RIGHT CLICK, select open a command window here
- Run this code in the command prompt without quotes
- "fastboot oem lock"
- Now reboot
- Now, we will flash you back to the original stock ROM you were on
- Pick the RUU for your specific device. For example, the one for AT&T has the word "Cingular" in it, the one for Rogers says "Rogers" in it.
- You will find the RUU's here http://www.filefactory.com/f/002b74e0f4775869/ (THANKS to user football)
- Once you download the correct RUU, make sure your phone is plugged in via USB to your computer and you have the correct drivers (or just HTC Sync) installed on your computer
- Run the executable and follow the steps to flash the stock ROM
- Once the ROM loads, you can move on to the next steps

Same, but It is used with HTC Support. Unlocking allows CUSTOM ROMS That is a default HTC/Att/Whatever RomUtilityUpdate (RUU) so you need to be relocked for it to work or you will get errors and will not work

>>>so you need to be relocked for it to work or you will get errors and will not work
For it to work? what is "it", the RUU?
If so how do I relock it. when I adb devices I dont show up so I cant fastboot oem lock.

Sounds like you have the incorrect htc drivers installed. download the all in one toolkit in the android development and install the drivers and see if it shows up in adb.. just to make sure you have to be in hboot and the phone will say "Fastboot usb" in red text then you open a command window and type "fastboot oem lock"

>>>all in one toolkit in the android development
do you have a link for that?

bobmutch2 said:
>>>all in one toolkit in the android development
do you have a link for that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1498003

Restoring Vivid

This is what my recovery screen says at the top:
*** UNLOCKED ***
Holiday PVT SHIP S-ON RL
HBOOT-1.85.0025
Click to expand...
Click to collapse
Currently im running Holics ROM 0.8.
I want to get back to stock rom without bricking my phone.
I need noob instructions, i dont know anything ...
Thanks,
Dom

No one can help me and teach me how to restore the Vivid?

You need to lock the bootloader and run the phones RUU.
Do you want the ICS or GB stock?
Sent from my HTC PH39100 using XDA

Chavisca1 said:
You need to lock the bootloader and run the phones RUU.
Do you want the ICS or GB stock?
Click to expand...
Click to collapse
Well I'd rather have ICS lol
But whichever works

Go here:
http://forum.xda-developers.com/showthread.php?t=1564776
This is the phones RUU.
Click the link in the post and it will download automatically.
Then once that's downloaded, Boot into H-Boot and go into fastboot usb.
(Assuming you have android-sdk installed)
Go to where you have the fastboot.exe installed. Should be with the adb and all in platform-tools.
And hold shift and right click and click open command window here.
The type "fastboot oem lock"
Run the RUU.exe you downloaded.

Chavisca1 said:
Go here:
http://forum.xda-developers.com/showthread.php?t=1564776
This is the phones RUU.
Click the link in the post and it will download automatically.
Then once that's downloaded, Boot into H-Boot and go into fastboot usb.
(Assuming you have android-sdk installed)
Go to where you have the fastboot.exe installed. Should be with the adb and all in platform-tools.
And hold shift and right click and click open command window here.
The type "fastboot oem lock"
Run the RUU.exe you downloaded.
Click to expand...
Click to collapse
Yeah i tried this method dozens of times, the command prompt just sits there and says "waiting for device"
or something similar

Do you have the drivers for the phone?
http://forum.xda-developers.com/showthread.php?t=1450105
The drivers for Windows 7 and XP Are in the download links of this forum.

Drivers as in the HTC Drivers installed on my PC?
Yeah

Can you type in "fastboot devices" when you're in fastboot and it give you the serial number for your phone? Or does it just show nothing?

shows nothing

You need drivers. Try re installing. I posted a link above.

[Q] Help for stock ROM

Hi all, i need as soon as possible your help. I need to go back to stock ROM, since i have to send my phone in warranty beacouse the display is broken. I need to know every step i have to do. Your help will be really appreciate.

ParadiseCity said:
Hi all, i need as soon as possible your help. I need to go back to stock ROM, since i have to send my phone in warranty beacouse the display is broken. I need to know every step i have to do. Your help will be really appreciate.
Click to expand...
Click to collapse
Download correct ruu, in fastboot mode type fastboot oem lock in cmd and flash ruu when phone is fully rebooted.
For locking bootloader, step 6: http://forum.xda-developers.com/showthread.php?t=1578546
and for ruu chapter 4: http://forum.xda-developers.com/showthread.php?t=1693896

AlluXX said:
Download correct ruu, in fastboot mode type fastboot oem lock in cmd and flash ruu when phone is fully rebooted.
For locking bootloader, step 6: http://forum.xda-developers.com/showthread.php?t=1578546
and for ruu chapter 4: http://forum.xda-developers.com/showthread.php?t=1693896
Click to expand...
Click to collapse
6.open the terminal in your computer and type in 'adb devices', you probably will see an empty list, no devices. Just follow step 7
7. type in 'fastboot oem lock' without quotes and your device is locked again, you will see relocked - you might see a warning under it but that's nothing, after rebooting the warning will go away.
I haven't understand these lines. Can u explain me, what does mean "adb devices"?

Sv: [Q] Help for stock ROM
ParadiseCity said:
6.open the terminal in your computer and type in 'adb devices', you probably will see an empty list, no devices. Just follow step 7
7. type in 'fastboot oem lock' without quotes and your device is locked again, you will see relocked - you might see a warning under it but that's nothing, after rebooting the warning will go away.
I haven't understand these lines. Can u explain me, what does mean "adb devices"?
Click to expand...
Click to collapse
Most easy way to flash stock ROM is when device is unlocked , s-off it and run the ruu. If you relock the device you can't flash a GB ROM if you had used stock ICS.
Sent from my Sensation XL using xda app-developers app

anders3408 said:
Most easy way to flash stock ROM is when device is unlocked , s-off it and run the ruu. If you relock the device you can't flash a GB ROM if you had used stock ICS.
Sent from my Sensation XL using xda app-developers app
Click to expand...
Click to collapse
I have installed SDK Android tools, but when i write on CMD "fastboot oem lock" it says "this command is unknown". Why?

ParadiseCity said:
I have installed SDK Android tools, but when i write on CMD "fastboot oem lock" it says "this command is unknown". Why?
Click to expand...
Click to collapse
1- download rom ship
2- relock loader
+ into flash mode
+ Run command in "platform-tools" Folder: "fastboot oem lock"
+ run rom ship RUU - - -ok

R: [Q] Help for stock ROM
chikaro24 said:
1- download rom ship
2- relock loader
+ into flash mode
+ Run command in "platform-tools" Folder: "fastboot oem lock"
+ run rom ship RUU - - -ok
Click to expand...
Click to collapse
How can i flash ruu? Will i have access to recovery?
Inviato dal mio HTC Sensation XL with Beats Audio X315e con Tapatalk 2

Flashing an ruu is done via computer with a windows os

Complete Rooting HTC Butterfly s

Disclaimer:- Below mentioned links was upload By @daorderdillon this thread is comprehensive and explains in lot more detail
S-off,Rooting,firmware install,ota install,Rom install for butterfly s.
Carefully read each step before acting
don't use any kind of screen locks
Use this link to download 901e or 901s model attachments
Before We Begin
Have a micro USB cable handy.
Download and install the HTC USB drivers. Do this by downloading and installing HTC Sync Manager and following the instructions. HTC can be found by going to this link.
You will need this link to download adb and fastboot we will use it later.
All ways remember to uncheck "fastboot" in power tab in settings
Go to setting tap power go to end
And enable USB debugging
Go to setting tap "about" then tap "Software information" then tap then tap 7 times on "build number" to enable developer option enable in settings.
How to unlock Bootloader butterfly s?
Use this link to unlock Bootloader warning this may void your warranty***tampered*** and ***unlocked*** will be written in bootloader but don't worry we will remove it with S-off
if your device not listed use "all other supported device"
Only unlock bootloader isn't much help you will need s-off as well soooo....
How to get S_off butterfly s?
With S-off in other words security off you will be doing a lot of modifications.
We will use Firewater.
YOU HAVE TO BE ON STOCK RECOVERY AND ROM TO PERFORM THIS ACTION
otherwise it will fail horribly
Use this link to s-off
Remove only sync not drivers.
read carefully at firewater instructions.
you will be s-off.
How to Flash firmware butterfly s?
Back up using nandroid google it how to?
This is a test device will be written in recovery so be carefull what you wish for but you can remove it i don't know how but you can search for it in google.
S-off and unlocked bootloader needed
If you have stock CID you can proceed to step 1. If you have any other CID you need to change it before beginning. In this example I am talking about HTC__621 901e model.
Asia with CIDs HTC__044
Hong Kong with CIDs HTC__622
Taiwan with CIDs HTC__621
open up a command window in adb director in C:\adb or where ever you put adb and fastboot
hold shift and click right mouse button to open up a "command window here"
Type these commands.
Write the stock CID back to device by running this:
"adb reboot-bootloader" without ""
Phone should boot to the bootloader. Now run:
"fastboot oem writecid HTC__621" I prefer use this
or you can write
"fastboot oem writecid 11111111"
Now verify that the CID shows on the bootloader screen by running:
fastboot reboot-bootloader
Reboot device if CID on bootloader screen shows the CID. If not retry
*****The next step will wipe the entire contents of the device which includes all of your data. Be sure to back it up to a PC so you can transfer it onto the new device if needed.*****
These instructions are assuming you are running a Windows OS. If you are not then these exe RUU’s won’t be of much use.
Download the firmware.zip file and place in your ADB/fastboot folder. I would recommend renaming the zip file to something simple like ruu.zip.
Boot your phone into the bootloader by holding the power and vol up/down buttons at the same time until you see the bootloader screen or if you have your phone booted you can use the ADB command:
adb reboot-bootloader
Now use these fastboot commands:
fastboot oem rebootRUU
Should see the Silver HTC logo. Now issue this command to flash your phone using the ruu.zip file:
fastboot flash zip ruu.zip
Now the first time you issue a command to flash firmware/ruu in fastboot it only prepares the flash. You have to issue the exact command again:
fastboot flash zip ruu.zip
The green status bar usually does not reach the 100% mark. When the output in the command window is complete, you can reboot:
fastboot reboot
**Notes about the RUU.zip method. You still need to have the proper CID for the RUU. You can run the RUU.zip with super CID, but you will have to lock your bootloader first. If you are running the RUU.zip as base to downgrade all your firmware because you are going to then going to restore a stock Nandroid so the RUU might not be made for your MID, so you may need to edit the android-info.txt inside the ruu.zip to include your MID or CID.
if you have sucessfully did this you can see hboot 1.54
How to install ota butterfly s?
YOU HAVE TO BE ON STOCK RECOVERY,ROM AND S-off TO PERFORM THIS ACTION
1. Check ROM version in Settings-About-Software Information, it MUST match second value in example case 1.21.709.3-1.12.709.2, if you have version different from 1.12.709.2, update will FAIL.
2. Make sure that your device running system without any app/files modifications, otherwise update will FAIL.
3. Your device must be S-OFF AND/OR LOCKED or RELOCKED, being S-ON and UNLOCKED won’t allow you to apply OTA update.
4. Check your recovery, official OTA can be applied ONLY on Stock Recovery, TWRP/CWM/PhilzTouch and etc can’t be used.
5. Now we can copy out OTA package in system storage, I recommend to copy file in root of the Internal Storage but its not necessary.
6. Turn off device.
7. Press Power button and Volume down button, keep them until you see bootloader.
3. After that use volume down button to make a choice at Recovery option and press Power button. Device will reboot in Recovery mode.
4. When recovery starts, you will see red triangle, don’t worry nothing bad happened.
5. Wait for a while and press both Volume buttons and click Power button. This combination allows you to enter Recovery menu.
6. Using volume buttons, navigate to ”apply from phone storage” option and press Power button.
7. Now you can choose your OTA package. In our example it will be stored in data/media/0/OTA_DLXPLUS_U_JB_50_hTC_Asia_TW_1.21.709.3-1.12.709.2_release_333902.zip then press Power button.
8. During installation you might need to follow some instructions on screen. Reboot device when installation finishes.
9. After reboot you will get message that you successfully updated your device
10.If you have already modified you device to a point where no OS is showing in hboot the device will reboot several times.
11.If you want JB 4.3
with sense 5.5 just download it normally in system updates.
if download ota fail
Go to cwm in advance format every thing except external sd card
format system
format internal storage
etc
flash stock firmware
flash cwm recovery
flash stock rom
flash stock recovery
then flash ota
read above and below how to flash
How to install Rom butterfly s?
In order to install rom you will need CWM or Twrp I recommend CWM
1.Boot your HTC Butterfly S into bootloader mode by pressing Volume Down and Power at the same time when it boots up.
2.Connect your HTC Butterfly S to your PC using your micro USB cable.
3.Open a command prompt window in where you put recovery-clockwork-touch-6.0.3.4-dlxpul.img. Do this by going into the fastboot folder, hold down the shift key and right clicking. Once you’ve right clicked, the windows context menu will appear. Select the option ‘open command window here’. A command prompt window will then appear.
4.To flash the custom recovery, enter the command below into the command prompt window.
"fastboot flash recovery recovery-clockwork-touch-6.0.3.4-dlxpul.img"
How to Root butterfly s?
1.Dowload This
2.Put it in internal storage.
3.Reboot into recovery.
4.Use CWM to install zip from sd.
5.Select downloaded .zip.
6.that's it reboot and you are rooted.
How to install rom butterfly s?
1.Download above stock_dlxpul_1.21.709.3.zip or choose from this
2.Put it in internal storage.
3.Reboot into recovery.
4.Use CWM to install zip from sd.
5.Select downloaded .zip.
6.that's it reboot and you have new rom installed.
For more Guide go to This

Is this working with updated OTA 4.4.2 / HBOOT 1.57. I need root to address some issue on KitKat (battery, SD access). Thanks!

unroot htc butterfly s
can someone help me give link to UNROOTING HTC butterfly s? Thanks

rifin2000 said:
can someone help me give link to UNROOTING HTC butterfly s? Thanks
Click to expand...
Click to collapse
i'm looking for that too

Are not root!! please help me !!!!!!

butterfly s 901e said:
Disclaimer:- Below mentioned links was upload By @daorderdillon this thread is comprehensive and explains in lot more detail
S-off,Rooting,firmware install,ota install,Rom install for butterfly s.
Carefully read each step before acting
don't use any kind of screen locks
Use this link to download 901e or 901s model attachments
Before We Begin
Have a micro USB cable handy.
Download and install the HTC USB drivers. Do this by downloading and installing HTC Sync Manager and following the instructions. HTC can be found by going to this link.
You will need this link to download adb and fastboot we will use it later.
All ways remember to uncheck "fastboot" in power tab in settings
Go to setting tap power go to end
And enable USB debugging
Go to setting tap "about" then tap "Software information" then tap then tap 7 times on "build number" to enable developer option enable in settings.
How to unlock Bootloader butterfly s?
Use this link to unlock Bootloader warning this may void your warranty***tampered*** and ***unlocked*** will be written in bootloader but don't worry we will remove it with S-off
if your device not listed use "all other supported device"
Only unlock bootloader isn't much help you will need s-off as well soooo....
How to get S_off butterfly s?
With S-off in other words security off you will be doing a lot of modifications.
We will use Firewater.
YOU HAVE TO BE ON STOCK RECOVERY AND ROM TO PERFORM THIS ACTION
otherwise it will fail horribly
Use this link to s-off
Remove only sync not drivers.
read carefully at firewater instructions.
you will be s-off.
How to Flash firmware butterfly s?
Back up using nandroid google it how to?
This is a test device will be written in recovery so be carefull what you wish for but you can remove it i don't know how but you can search for it in google.
S-off and unlocked bootloader needed
If you have stock CID you can proceed to step 1. If you have any other CID you need to change it before beginning. In this example I am talking about HTC__621 901e model.
Asia with CIDs HTC__044
Hong Kong with CIDs HTC__622
Taiwan with CIDs HTC__621
open up a command window in adb director in C:\adb or where ever you put adb and fastboot
hold shift and click right mouse button to open up a "command window here"
Type these commands.
Write the stock CID back to device by running this:
"adb reboot-bootloader" without ""
Phone should boot to the bootloader. Now run:
"fastboot oem writecid HTC__621" I prefer use this
or you can write
"fastboot oem writecid 11111111"
Now verify that the CID shows on the bootloader screen by running:
fastboot reboot-bootloader
Reboot device if CID on bootloader screen shows the CID. If not retry
*****The next step will wipe the entire contents of the device which includes all of your data. Be sure to back it up to a PC so you can transfer it onto the new device if needed.*****
These instructions are assuming you are running a Windows OS. If you are not then these exe RUU’s won’t be of much use.
Download the firmware.zip file and place in your ADB/fastboot folder. I would recommend renaming the zip file to something simple like ruu.zip.
Boot your phone into the bootloader by holding the power and vol up/down buttons at the same time until you see the bootloader screen or if you have your phone booted you can use the ADB command:
adb reboot-bootloader
Now use these fastboot commands:
fastboot oem rebootRUU
Should see the Silver HTC logo. Now issue this command to flash your phone using the ruu.zip file:
fastboot flash zip ruu.zip
Now the first time you issue a command to flash firmware/ruu in fastboot it only prepares the flash. You have to issue the exact command again:
fastboot flash zip ruu.zip
The green status bar usually does not reach the 100% mark. When the output in the command window is complete, you can reboot:
fastboot reboot
**Notes about the RUU.zip method. You still need to have the proper CID for the RUU. You can run the RUU.zip with super CID, but you will have to lock your bootloader first. If you are running the RUU.zip as base to downgrade all your firmware because you are going to then going to restore a stock Nandroid so the RUU might not be made for your MID, so you may need to edit the android-info.txt inside the ruu.zip to include your MID or CID.
if you have sucessfully did this you can see hboot 1.54
How to install ota butterfly s?
YOU HAVE TO BE ON STOCK RECOVERY,ROM AND S-off TO PERFORM THIS ACTION
1. Check ROM version in Settings-About-Software Information, it MUST match second value in example case 1.21.709.3-1.12.709.2, if you have version different from 1.12.709.2, update will FAIL.
2. Make sure that your device running system without any app/files modifications, otherwise update will FAIL.
3. Your device must be S-OFF AND/OR LOCKED or RELOCKED, being S-ON and UNLOCKED won’t allow you to apply OTA update.
4. Check your recovery, official OTA can be applied ONLY on Stock Recovery, TWRP/CWM/PhilzTouch and etc can’t be used.
5. Now we can copy out OTA package in system storage, I recommend to copy file in root of the Internal Storage but its not necessary.
6. Turn off device.
7. Press Power button and Volume down button, keep them until you see bootloader.
3. After that use volume down button to make a choice at Recovery option and press Power button. Device will reboot in Recovery mode.
4. When recovery starts, you will see red triangle, don’t worry nothing bad happened.
5. Wait for a while and press both Volume buttons and click Power button. This combination allows you to enter Recovery menu.
6. Using volume buttons, navigate to ”apply from phone storage” option and press Power button.
7. Now you can choose your OTA package. In our example it will be stored in data/media/0/OTA_DLXPLUS_U_JB_50_hTC_Asia_TW_1.21.709.3-1.12.709.2_release_333902.zip then press Power button.
8. During installation you might need to follow some instructions on screen. Reboot device when installation finishes.
9. After reboot you will get message that you successfully updated your device
10.If you have already modified you device to a point where no OS is showing in hboot the device will reboot several times.
11.If you want JB 4.3
with sense 5.5 just download it normally in system updates.
if download ota fail
Go to cwm in advance format every thing except external sd card
format system
format internal storage
etc
flash stock firmware
flash cwm recovery
flash stock rom
flash stock recovery
then flash ota
read above and below how to flash
How to install Rom butterfly s?
In order to install rom you will need CWM or Twrp I recommend CWM
1.Boot your HTC Butterfly S into bootloader mode by pressing Volume Down and Power at the same time when it boots up.
2.Connect your HTC Butterfly S to your PC using your micro USB cable.
3.Open a command prompt window in where you put recovery-clockwork-touch-6.0.3.4-dlxpul.img. Do this by going into the fastboot folder, hold down the shift key and right clicking. Once you’ve right clicked, the windows context menu will appear. Select the option ‘open command window here’. A command prompt window will then appear.
4.To flash the custom recovery, enter the command below into the command prompt window.
"fastboot flash recovery recovery-clockwork-touch-6.0.3.4-dlxpul.img"
How to Root butterfly s?
1.Dowload This
2.Put it in internal storage.
3.Reboot into recovery.
4.Use CWM to install zip from sd.
5.Select downloaded .zip.
6.that's it reboot and you are rooted.
How to install rom butterfly s?
1.Download above stock_dlxpul_1.21.709.3.zip or choose from this
2.Put it in internal storage.
3.Reboot into recovery.
4.Use CWM to install zip from sd.
5.Select downloaded .zip.
6.that's it reboot and you have new rom installed.
For more Guide go to This
Click to expand...
Click to collapse
In order to S-OFF, need to perform on stock htc rom? cause i run rumrunner, until pouring number 8 say need power off phone, pray and run again in 30 secs, try many times, same
help...

Updated Firmware, how to re unlock bootloader after locking it?

Have manually updated my HTC ONE M7 to FW 4.19.401.11 following these steps from the thread here, http://forum.xda-developers.com/showthread.php?t=2182823...
1. Re-lock your bootloader (this will most probably wipe content of your device)
2. Copy downloaded .zip to fastboot.exe location (e.g. c:/SDK/platform-tools/fastboot.exe)
3. Re-name .zip file to firmware.zip
4. Open command prompt
5. Boot your device in fastboot mode (vol down + power ===> fastboot)
6. Connect device to the PC
7. In command prompt cd to fastboot.exe location
8. Make sure you have correct modeid and cidnum (type: fastboot getvar all)
9. Type: fastboot oem lock (if your device is not relocked yet)
10. Type: fastboot oem rebootRUU and wait for device to reboot
11. Type: fastboot flash zip firmware.zip and wait for process to complete
12. Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
13. Type: fastboot flash zip firmware.zip and wait for process to complete
14. Type: fastboot reboot
15. Unlock your bootloader and flash custom recovery if you are going to use custom ROM.
But now the phone doesnt appear to boot im able to get into bootloader by holding down the volume button, any ideas why i cant boot into the HTC ONE do i need to re unlock the boot loader? If so how do you re unlock the boot loader after relocking it please?
EDIT: Im guess the phone doesnt boot as i need to flash a custom ROM??....if so do i have to re unlock the bootloader first?

BlockABoots said:
Have manually updated my HTC ONE M7 to FW 4.19.401.11 following these steps from the thread here, http://forum.xda-developers.com/showthread.php?t=2182823...
1. Re-lock your bootloader (this will most probably wipe content of your device)
2. Copy downloaded .zip to fastboot.exe location (e.g. c:/SDK/platform-tools/fastboot.exe)
3. Re-name .zip file to firmware.zip
4. Open command prompt
5. Boot your device in fastboot mode (vol down + power ===> fastboot)
6. Connect device to the PC
7. In command prompt cd to fastboot.exe location
8. Make sure you have correct modeid and cidnum (type: fastboot getvar all)
9. Type: fastboot oem lock (if your device is not relocked yet)
10. Type: fastboot oem rebootRUU and wait for device to reboot
11. Type: fastboot flash zip firmware.zip and wait for process to complete
12. Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
13. Type: fastboot flash zip firmware.zip and wait for process to complete
14. Type: fastboot reboot
15. Unlock your bootloader and flash custom recovery if you are going to use custom ROM.
But now the phone doesnt appear to boot im able to get into bootloader by holding down the volume button, any ideas why i cant boot into the HTC ONE do i need to re unlock the boot loader? If so how do you re unlock the boot loader after relocking it please?
EDIT: Im guess the phone doesnt boot as i need to flash a custom ROM??....if so do i have to re unlock the bootloader first?
Click to expand...
Click to collapse
try holding the power buttons until the home and back buttons flash, wait til they stop then press volume down, release the power button then release the volume down

grantymc said:
try holding the power buttons until the home and back buttons flash, wait til they stop then press volume down, release the power button then release the volume down
Click to expand...
Click to collapse
Ah that worked thanks!

Uproblem for unlock the relock HTC One
hi
I relocked my HTC One M7 by HTC Bootloader Unlock Application In Windows 8 & Then my phone not start and gone to fastboot mode!
I can not install any ROm or Unlock Again,PLZ help me ASAP...:crying:

Saeiddvc said:
hi
I relocked my HTC One M7 by HTC Bootloader Unlock Application In Windows 8 & Then my phone not start and gone to fastboot mode!
I can not install any ROm or Unlock Again,PLZ help me ASAP...:crying:
Click to expand...
Click to collapse
1- Why did you relocked your bootloader?
2- ''HTC Bootloader Unlock Application'' doesn't say much. I guess you are referring to a toolkit which is not recommended to use
3- Why can't you unlock again? Get your identifier token from fastboot en send it to htcdev. Then flash your unlock code bin file to unlock your phone again. Then youll be able to flash a recovery and a rom...

I CAN`T flash unlock code because my phone not connected to my pc until I relock this!!!!!

Saeiddvc said:
I CAN`T flash unlock code because my phone not connected to my pc until I relock this!!!!!
Click to expand...
Click to collapse
not sure what you are trying to say here mate.
your phone doesn't need to be unlocked to be able to ''connect it'' to your pc. You should be able to use fastboot from bootloader to
1- get your identifier token
2- flash the unlock_code.bin to unlock it again
if you can't 'communicate with the phone using fastboot in bootloader, your drivers are not installed correctly on your computer.
in windows device manager, it should be listed as ''My HTC'' if your drivers are ok.

alray said:
not sure what you are trying to say here mate.
your phone doesn't need to be unlocked to be able to ''connect it'' to your pc. You should be able to use fastboot from bootloader to
1- get your identifier token
2- flash the unlock_code.bin to unlock it again
if you can't 'communicate with the phone using fastboot in bootloader, your drivers are not installed correctly on your computer.
in windows device manager, it should be listed as ''My HTC'' if your drivers are ok.
Click to expand...
Click to collapse
thanks
I uninstalled HTC driver & restarted My PC the install it again so connect HTC ONE to my PC & unluck again