Related
A few weeks ago when I still had my HTC Hero it was overclocked to 672Mhz (standard = 528Mhz). It gave me a little boost in performance on Froyo, also the batterylife wasn't decreased too much.
But with our N1 running on 1Ghz, will it give much difference when clocked to 1113/1152Mhz? And what about batterylife?
If SetCPU is used what are your settings then? Mine is currently running on stock speed, no SetCPU.
ZeppeMan said:
A few weeks ago when I still had my HTC Hero it was overclocked to 672Mhz (standard = 528Mhz). It gave me a little boost in performance on Froyo, also the batterylife wasn't decreased too much.
But with our N1 running on 1Ghz, will it give much difference when clocked to 1113/1152Mhz? And what about batterylife?
If SetCPU is used what are your settings then? Mine is currently running on stock speed, no SetCPU.
Click to expand...
Click to collapse
I have my nexus one rooted and flashed to MIUI Rom and clock @ 690mhz I get way better battery power. Before I would only get 6hr to 8hr if lucky now I get from 9hr to 13hr depending how much I use it.
set to 1.13 ghz
then screen off to minimum 245mhz
josemedina1983 said:
I have my nexus one rooted and flashed to MIUI Rom and clock @ 690mhz I get way better battery power. Before I would only get 6hr to 8hr if lucky now I get from 9hr to 13hr depending how much I use it.
Click to expand...
Click to collapse
So you underclocked it, what about the speed? It's not to laggy?
Nexus one can run reasonably smooth @ 600mhz and above. It might not open applications as fast as it will be @ 1GHz though.
i think 1Ghz is enough for n1
why do u want an overclock?
Sent from my Nexus One using XDA App
shreyas1122 said:
i think 1Ghz is enough for n1
why do u want an overclock?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
I didn't said I want an overclock. It's allready very fast on 1Ghz (compared to my old Hero ), just wanted to know your thoughts about overclocking the N1.
im overclocked at 1152 mhz and profiles set for 245 max with screen off. Overclocking is nice because i like the snappiness but most people cant tell the difference between 998 mhz and 1152. its not needed to overclock but i think profiles help alot. just my two cents
Ok thx, I will try 1150Mhz and see (if it's stable and) what batterylife does. I'm also going to try underclocking.
I have my N1 only for a couple of weeks now and I must say, this phone is awesome. It's VERY fast compared to my old Hero. I remember when I was installing apps on my Hero it became very slow and couldn't do anything untill installing was finished. With the N1 you still can do things while installing apps without lag. The responsiveness and smoothness is also a lot faster. I loved my Hero Because it never let me down, ok it was all a bit slower, but it was getting there. Now with the release of Gingerbread (custom ROM) it became to slow for me and that's why I sold my Hero and bought the N1. It was very difficult to find one, because of the EOL (end of life). But eventually I found one and i'm very happy with it. The N1 is allready more 1 year old, but it still competes with the best phones out there.
I generally run overclocked at 1075MHz, which gives a good balance between battery power usage and processor power. My understanding is that a different voltage scaling method is generally used above 1075MHz, so power consumption will increase above that point.
Didn't knew the voltage would increase above 1075Mhz, will keep that in mind
ZeppeMan said:
Didn't knew the voltage would increase above 1075Mhz, will keep that in mind
Click to expand...
Click to collapse
This is, of course, dependent upon how the kernel is constructed, but this is what I have generally found to be true.
Give us some feedback
I overclocked it too 1075Mhz when screen is on (screen off 245Mhz). Will give my thoughts in a day or 2.
Just report that my battery drain is almost the same as on stock settings. I think it drains a tiny bit faster on 1075Mhz, but nothing major. On the other hand, I don't feel it's faster on 1075Mhz then on stock speed. Only benchmarks give me performance increase.
I'm now on CM6.1.1 with stock kernel (cyanogen), I tried other kernels like Wilmonks kernel,.. Although it was more responsive, battery was going down even faster. I get best battery results with stock kernel.
Hard to choose
more speed = more battery drain
less speed = longer battery
I think I stay with the last option (less speed = longer battery), because Wildmonks kernel doesn't give me enough performance increase over the stock kernel on stock speed.
I have mine at 998mhz, but overclocked 1152 while plugged into power.
Either way, its so easy to play with the clock settings, i'd just have a play with a bunch of different settings if i were you.
liam.lah said:
I have mine at 998mhz, but overclocked 1152 while plugged into power.
Click to expand...
Click to collapse
I'd love a how-to fire that..
mind sharing the app?
Sent from my Nexus One
ZeppeMan said:
wanted to know your thoughts about overclocking the N1.
Click to expand...
Click to collapse
well my thoughts: underclock!
so you can watch movies on it all night!
Sent from my Nexus One
shreyas1122 said:
I'd love a how-to fire that..
mind sharing the app?
Sent from my Nexus One
Click to expand...
Click to collapse
You can use SetCPU to create profiles based on different circumstances.
Me, I have mine clocked to a max of 1075 and min of 245 with the screen on, 576 max / 128 min screen off, 998/128 charging (to reduce heat - overclocking while power is applied can make it silly hot), and a failsafe to clock down to 576/128 if the temperature gets over 50*C.
Fabulous app.
Correct me if I am wrong. When you use setcpu to "ondemand", the CPU speed can ramp up to max whenever necessary, otherwise the speed will tune down to min especially in standby mode. In that way, you can enjoy the advantages of overclocking and underclocking the CPU speed i.e. increasing performance when needed and saving power when not in use, right? When I loaded Rod's MIUI and Wildmonk's kernel, I can underclock down to 128Mhz and overclock up to 1.152Ghz. At the end of the day, I still have over 60% of power left after not so heavily use (some web browsing, checking email and listen some music). Overall, setcpu is a great app for me.
What are the benefits of OC/UV (particularly for CM7)?
I know of improved performance due to OC, but what does UV do in regards to performance. Also, how does an OC/UV kernel compare to one without the option?
your processor doesn't need as much voltage as the stock settings--undervolting lets you save battery
personally i want to know.. do you have to UV to OC?
xredjokerx said:
your processor doesn't need as much voltage as the stock settings--undervolting lets you save battery
personally i want to know.. do you have to UV to OC?
Click to expand...
Click to collapse
You can do either or both but don't have to do both. At some point UVing will cause a crash. Right before that point it can cause performance issues. See the link below for instructions on how to find an optimal UV level to maximize battery savings and performance.
http://forum.xda-developers.com/showpost.php?p=10936691&postcount=1102
OCing improves speed but can also cause stability issues. For a captivate this usually isn't a problem until you get past 1.2 ghz. After that, it depends on the kernel but I have yet to find a kernel that is completely stable past 1.2 ghz under stressful conditions. Samsung designed the processor to handle 1.2 ghz and in theory it can go up to at least 1.6.
Like everyone before me has said, OC will make your processor work more (which will eat up more battery, and send the temps a bit higher).
UV is a way to "fix" that problem by controlling the voltage used by each Mhz/Ghz range. The mini guide that QuarkGluonSoup posted is a great way to start off.
Most Captivates start have random errors past 1.2Ghz, but the highest I've seen (stable) are 1.4Ghz.
venomio said:
Like everyone before me has said, OC will make your processor work more (which will eat up more battery, and send the temps a bit higher).
UV is a way to "fix" that problem by controlling the voltage used by each Mhz/Ghz range. The mini guide that QuarkGluonSoup posted is a great way to start off.
Most Captivates start have random errors past 1.2Ghz, but the highest I've seen (stable) are 1.4Ghz.
Click to expand...
Click to collapse
Odd as it sounds, my battery life on CM7 is close to 50% better when it is OC'ed to 1.2 ghz and UV'ed than it was on the froyo ROMs under the same conditions.
That really is odd :S I think I'll try it myself.
Hello, everyone. I know that it possible to double the original clock speed on the motorola milestone 1, but how safe is it, in terms of overall reliability? a friend gave me a milestone that has been previously overclocked to 1.2 ghz, and i want to reduce the speed back to about 800 Mhz, but i`m wondering if it`s possible to have already permanently shortened the life of the processor....any opinion is welcomed !
is it possible?? YES
does it reduce the life of the CPU?? YES
did it already reduce the life of the CPU??? i think YES. every overclocking reduces the life of the CPU no matter if its 1,2GHz or 800MHz
AND... YES underclock to 800MHz. i think 800 is a very stable and good speed for the milestone. you will not see or feel any difference to 1GHz or more.
a very precise answer. thank you
rochester21 said:
Hello, everyone. I know that it possible to double the original clock speed on the motorola milestone 1, but how safe is it, in terms of overall reliability? a friend gave me a milestone that has been previously overclocked to 1.2 ghz, and i want to reduce the speed back to about 800 ghz, but i`m wondering if it`s possible to have already permanently shortened the life of the processor....any opinion is welcomed !
Click to expand...
Click to collapse
Mhh.. 800 GHz seems a little much i think. Try around 700 GHz, your phone should also be a lot cooler
[ sorry couldnt resist ]
Napsterr hit the nail on the head. ANY overclocking will reduce the lifespan of the processor, and harm battery life.
I personally have mine OC'ed to 1.25ghz without any problems, but that is because I know when it kicks I can replace it. If you aren't able to replace it, the safest option is always stock clock/voltage.
yeah i agree with all of you above, 800mhz is a sensible speed……over 800 will make milestone heat up a real lot and drain out battery at a alarming rate……
Hey guys
I know their probably another thread out there with this in it but... Yeah. But go ahead troll me lol, im still a bit of a noob.:silly:
Anyways, i have a Galaxy Ace s5830. I have Beats with smooth sense ROM. I had it upto 883MHz Yesterday but after i turned it off then back on ROM Toolbox reverted it to 806MHZ. 883MHz seemed a lot faster even though some people get theirs close to 1GHZ
My phone afterwards rebooting had issues such as the phone becoming un-responsive when i was even doing nothing (maybe the overclock to 883MHz had some short term effect?) But the phone seemed fine after safely turning it off then back on several times. Still works perfectly i got scared when it started to become un-responsive. But it works well now i have also used pimp my ROM, and the scripts work like a charm. Especially the call quality one (it uses bravia engine or something?). But with pimp my ROM wi-fi and network tweaks it completely broke wi-fi saying wi-fi connecting... Then saying under the network name 'Error'. Dam it took so long to get the IP address then said error like i said lol
At the frequency 883MHZ the phone seemed stable and faster than ever before, i did change it in small increments
So just wondering, what is the safe and most reliable frequencies to set it at? I currently use 225Min and 806 Max. With the userspace governer.
I know the terms of ' Safe ' and overclock don't mix (sorta like water and my dads S2 :crying: ).
Im also considering buying a 2450MAH battery from ebay for about 5.99 AUD. Any suggestions on should it be okay and better? But i mainly would like to knwo about the overclcoking lol.
So yeah, basically what is a good frequency to set it at? Is 883MHZ okay? Am i going to fry it out or completely brick or damage the phone or cpu if i set it at 883MHZ? Would love to buy a new phone but i need to save im only 14
So yeah please help me and you could help others too. Please be welcomed to troll me
I plan on having this phone another 3-4 Months before i consider buying the S2 or Galaxy note when their cheap (like really cheap)...
Like i said please help, and feel welcomed to troll me when you do help :highfive:
Man i feel like a Rebel when i overclock
That battery is a fake and has been confirmed as such. If you want a higher cap. battery get a 1500mAh or 1600mAh. I don't like messing with the clocking, good luck to you.
Thanks
Narwhal73 said:
That battery is a fake and has been confirmed as such. If you want a higher cap. battery get a 1500mAh or 1600mAh. I don't like messing with the clocking, good luck to you.
Click to expand...
Click to collapse
Thank you for informing me that the battery is a fake ... But the seller has like 96%/100% seller rate or something?
Thanks for all your help, i hited like
Sorry for my 'Noobiness'.
What battery do you reccomend? or should i consider getting a AA battery to USB power charger?
i'm pretty comfortable with 825 or 844 mhz
It's pretty good with 614 MHz lol
Sent from my GT-S5830 using Tapatalk 2
Running smooth even on 614 Mhz.
Moderate usage.
King Android said:
Thank you for informing me that the battery is a fake ... But the seller has like 96%/100% seller rate or something?
Thanks for all your help, i hited like
Sorry for my 'Noobiness'.
What battery do you reccomend? or should i consider getting a AA battery to USB power charger?
Click to expand...
Click to collapse
Right now I am just using the stock one. I personally wouldn't change my battery to anything other than stock, but people have reported that 1500mAh or 1600mAh work well. I wouldn't use anything that has a higher capacity than that though. Also, if it's very inexpensive it's probably not real.
Clocking actually goes on the rom. I've seen people having OC over 1gHz & still stable with the mad kernel but I gave up clocking as I didn't see much of a difference & also underclocking started giving me FCs on some heavy apps while it was all fair in the unclocked state. And again, there's no such thing as a best frequency. You find your own values. What works well for him might mess up your phone rebooting all by itself. Stock batteries are always fine & they also keep you under warranty. Anyone ever wondered why the phone manufacturers didn't implement clocking as a part of it ? Stability is the word. I've seen here, I've seen there. East or west, stock is the best ! Try keeping as close to stock as possible, just to have that extra touch of safety & stability
Sent from my GT-S5830 using xda premium
Hello all.
I was reading this thread and became interested in overclocking. In my case my device is:
Samsung Galaxy Ace GT-S5830L (labeled as GT-S5830 by CyanogenMod)
CyanogenMod-7.2.0-cooper stable (Android version 2.3.7)
Kernel 2.6.35.7-perf-CL882825 ([email protected] #21)
I was checking in CM settings -> Performance -> CPU settings that I could adjust min and max clockspeed, but in max frequency the maximum one is the same processor's speed, 800 MHz. So my kernel doesn't support overclocking.
After a search in the forums I found there are plenty of custom kernels for this legacy device. But I'm relatively new to the kernel world, so I wanted to ask you for advise. What custom kernel could I try for my device for overclocking? Or King Android, what custom kernel are you using?
It'd the first time I do the overclocking stuff, I'd like to try it to see if some higher quality mp4 videos (which are run by MX Player only in software acceleration) can run better, as well as some games and emulators.
I'm also kind of a noob as you can see. If you want to troll/scold me...
Thank you all.
ctcx said:
Hello all.
I was reading this thread and [...]
Click to expand...
Click to collapse
Hi you can try FireKernel or BlackHawk kernel. Use the search function to find them easily. Both supports Overclocking and are made for CM7. [MAKE SURE THEY SUPPORT YOUR S5830L]
At the moment I'm with Democracy ROM which is based on unofficial CM7 and I don't really feel the need of overclocking. It is all smooth with firekernel at
Min 245
Max 806
Governor smartassv2
Sent from my... oh wait, who cares?
I did my search.
Maybe I forgot to mention I haven't installed a custom kernel before... Does the kernel come as a file itself, or along a CM7 custom rom? And if it comes as a file itself, how can I install it? I already mentioned what CM7 I have installed. It's the "official" stable one.
Would OCing help to improve videos and games performance? i.e, faster, no lag...
You can set it to whatever your phone can handle. Mine can't go past 844Mhz otherwise apps start force closing and such. If your phone is completely stable at 883Mhz then you're good.
As for the battery, no. It's a fake. Buy a 1500mAh like I did. Works like a charm and it brought 3. Lasts a little longer and it's really amazing. Had it for a while now. Still have one in the pack, only been using 2 when I don't get to charge my phone. Really handy.
---------- Post added at 03:07 AM ---------- Previous post was at 03:03 AM ----------
ctcx said:
I did my search.
Maybe I forgot to mention I haven't installed a custom kernel before... Does the kernel come as a file itself, or along a CM7 custom rom? And if it comes as a file itself, how can I install it? I already mentioned what CM7 I have installed. It's the "official" stable one.
Would OCing help to improve videos and games performance? i.e, faster, no lag...
Click to expand...
Click to collapse
OCing helps the phone over all. But remember, without much free ram, OC won't really change much. You need a balance of ram and CPU. Like me, I use swap and OC to 844Mhz. Even if it's a low OC, it's still better than nothing.
1. @SuperAce609: I have 104 Mb free RAM out of 278 Mb total RAM. Mine is Galaxy Ace S5830L with CM 7.2. Would OC work for me? Up to what frequency?
And how can you have 600 Mb of RAM? Is your device really an Ace?
2. There's still a doubt I haven't been able to find out myself: does the kernel come as a file itself, or along a CM7 custom rom? And if it comes as a file itself, how can I install it? I was suggested FireKernel or BlackHawk ones...
Any help?
ctcx said:
1. @SuperAce609: I have 104 Mb free RAM out of 278 Mb total RAM. Mine is Galaxy Ace S5830L...
And how can you have 600 Mb of RAM...
2. There's still a doubt I haven't been able to find out myself: does the kernel come as a file itself, or along a CM7 custom rom? And if it comes as a file itself, how can I install it? I was suggested FireKernel or BlackHawk ones...
Click to expand...
Click to collapse
1.- Every Ace is diferent..some Ace's can go up to 960 Mhz while other just 844 Mhz, the thing is: try it yourself overclocking in small jumps. Swap is a small amount of memory of your SD card, that Android use it like if where RAM, but decreases SD card life...
2.- Some Kernel came Built in on Some particullary ROM's but generally cames on a CWM Flashable zip; FireKernel & BlackHawk are specially for CM7; In my opinion FireKernel is the best... And there are others like Battery Extender Kernel or NimsKernel but these Kernel are only for Stock ROM's...
I hope you find useful my info...
Thank you, Blake2893.
Then there's just 2 doubts left, if you don't mind.
There's a fair number of custom CM7.2 roms with FireKernel in the developer forum. Is there one you or someone else could say is the best in terms of stability and least number of bugs? Or is that something I should test myself in the S5830L?
The Ace S5830/S5830L has 278 Mb total RAM by default. If I understand well, you're implying I could modify SWAP partition in order to increase RAM and, probably if lucky, with this make OC work better. How can I do that? Do I also need a custom kernel/rom for that?
The best stable Roms so far are the stock GingerBread based ones... but if you aks me about CM7 there a few like Apocalypse rom(ICS styled ROM) with the FireKernel that suports swap I think...
and for Swap you only need a Kernel with Swap enabled and a SWAP Partition on your Sd card...
lets see im fine and stable with 979 mhz without reboot for 9 hours
overclock is depend on your hardware
best over clock freq.
King Android said:
Hey guys
I know their probably another thread out there with this in it but... Yeah. But go ahead troll me lol, im still a bit of a noob.:silly:
Anyways, i have a Galaxy Ace s5830. I have Beats with smooth sense ROM. I had it upto 883MHz Yesterday but after i turned it off then back on ROM Toolbox reverted it to 806MHZ. 883MHz seemed a lot faster even though some people get theirs close to 1GHZ
My phone afterwards rebooting had issues such as the phone becoming un-responsive when i was even doing nothing (maybe the overclock to 883MHz had some short term effect?) But the phone seemed fine after safely turning it off then back on several times. Still works perfectly i got scared when it started to become un-responsive. But it works well now i have also used pimp my ROM, and the scripts work like a charm. Especially the call quality one (it uses bravia engine or something?). But with pimp my ROM wi-fi and network tweaks it completely broke wi-fi saying wi-fi connecting... Then saying under the network name 'Error'. Dam it took so long to get the IP address then said error like i said lol
At the frequency 883MHZ the phone seemed stable and faster than ever before, i did change it in small increments
So just wondering, what is the safe and most reliable frequencies to set it at? I currently use 225Min and 806 Max. With the userspace governer.
I know the terms of ' Safe ' and overclock don't mix (sorta like water and my dads S2 :crying: ).
Im also considering buying a 2450MAH battery from ebay for about 5.99 AUD. Any suggestions on should it be okay and better? But i mainly would like to knwo about the overclcoking lol.
So yeah, basically what is a good frequency to set it at? Is 883MHZ okay? Am i going to fry it out or completely brick or damage the phone or cpu if i set it at 883MHZ? Would love to buy a new phone but i need to save im only 14
So yeah please help me and you could help others too. Please be welcomed to troll me
I plan on having this phone another 3-4 Months before i consider buying the S2 or Galaxy note when their cheap (like really cheap)...
Like i said please help, and feel welcomed to troll me when you do help :highfive:
Man i feel like a Rebel when i overclock
Click to expand...
Click to collapse
The best and most stable overclock freq. is actually 906mhz-864mhz. It works like a charm mate! Try it.
Cyb3rVect0r said:
The best and most stable overclock freq. is actually 906mhz-864mhz. It works like a charm mate! Try it.
Click to expand...
Click to collapse
Using CPU high frequencies is not recommended, your device's life will be reduced considerably
Is it just me or other people are noticing significant performance drop going from v8 to v9? In the Aututu Bench I used to get 16000+ and now get under 14000 using same version of kernel. I even did a factory reset, still same score.
benchmarks don't mean anything
Glebun said:
benchmarks don't mean anything
Click to expand...
Click to collapse
Some times the CPU frequency drop on the sg3 to prevent overheat it doesn't drop significantly only to 1ghz and stays there's until it cools kind of dumb but it works you see the frequency download the CPU monitor in app store and see what I'm talking about