Help! Can't upgrade! - RAZR i Q&A, Help & Troubleshooting

Hi guys! I really need help on this... I'm on Claro Colombia and a update popup window have appeared but when i tried the installation from system gave me error, next I have copied the zip of ota update to my sd and tried to installed manually from recovery but first failed on sha1 checksum on phonesky (play store), easily solved downloading a same sha1 version of this file, after that was a build.prop sha1 checksum error which I still are looking for resolve (I have made many changes to build.prop). I'm on locked boot loader, rooted 8.7.1|-110_SML-13 firmware but unfortunately there isn't a official ICS release for Claro Colombia on sbf developers, but there is two 8.7.1 firms from Claro Peru and Claro Chile, don't know if I could use those two to extract build.prop and how to extract from system_signed file or if this could work as well...
Enviado desde mi XT890 usando Tapatalk 4 Beta

Related

[Q] Problems installing the FW

Hello everybody, these days I was helping my friend doing the installation of a Brazil Retail Firmware 4.4.4 on his XT1097 which came with Claro Brazil firmware, the objective was remove the link with Claro. We did the installation by the Prompt, but something strange happened in the flash of gpt, however others partitions passed with no problems. In the end the smartphone rebooted but continued with Claro firmware. We tried to install the new firmware three times but anything change! Could someone help?
Thankfully
Tenigima said:
Hello everybody, these days I was helping my friend doing the installation of a Brazil Retail Firmware 4.4.4 on his XT1097 which came with Claro Brazil firmware, the objective was remove the link with Claro. We did the installation by the Prompt, but something strange happened in the flash of gpt, however others partitions passed with no problems. In the end the smartphone rebooted but continued with Claro firmware. We tried to install the new firmware three times but anything change! Could someone help?
Thankfully
Click to expand...
Click to collapse
Either u r flashing the wrong firmware for the wrong model (XT1097), or the bootloader of the phone is locked.... What program u r using to flash?
theone_s_me said:
Either u r flashing the wrong firmware for the wrong model (XT1097), or the bootloader of the phone is locked.... What program u r using to flash?
Click to expand...
Click to collapse
I am installing the Firmware correct brow, Prompt manually installed by using the right commands!
Sorry for my bad english
Sent from my XT1058 using XDA Free mobile app

Huawei P8 Lite B171 Android 5.0 Lollipop Ufficial Firmware [Europe]

Firmware Details
Device: Huawei P8 Lite (Single-SIM)
Model: ALE-L21
Android: v5.0.1 Lollipop
EMUI: 3.1
Firmware: B171
Build: ALE L21C432B171
Region: Europe
Country: Hungary
Date: 20.11.2015
Branding: European general version
File Name: ALE-L21C432B171 (Single-SIM eu common)
Download
is this only Single-SIM ? why?
leandro_sousa said:
is this only Single-SIM ? why?
Click to expand...
Click to collapse
it came out so, after I do not know.
for dual sim there is this Download
Device: Huawei P8 Lite Dual SIM
Model: ALE-L21
Android: v5.0 Lollipop
Firmware: B132
EMUI: 3.1
Build Number: ALE-L21C432B132
Region: Hungary
Branding: General EU
Date: 15-09-2015
Status: Official
Type: Full firmware image
File Name: ALE-L21 C432B132 Europe channel Dual.rar
Size: 1.30 GB
Can i use it to update ALE-L21C432B133?
Thanks
ItalianWolf said:
Can i use it to update ALE-L21C432B133?
Thanks
Click to expand...
Click to collapse
rename the file in custom in dload, after you put it in the microSD card, and launches the updater update, repeat the same for the second file dload, and update again
linus2014 said:
rename the file in custom in dload, after you put it in the microSD card, and launches the updater update, repeat the same for the second file dload, and update again
Click to expand...
Click to collapse
Yes, i already know how to do it.
After upgrade emui updater says that there's an update ....b171 329MB but it doesn't show download button; why? after update we are on b171!
you made the update as I have indicated I? upgrade all two file of the firmware ...b171 manually
linus2014 said:
you made the update as I have indicated I? upgrade all two file of the firmware ...b171 manually
Click to expand...
Click to collapse
yes, first time folder custom (renamed to dload, local update, reboot, 100% success), second time folder dload (local update, reboot, 100% success)
Phone seems working without problems, it's strange; Someone can upload the update package (329MB) when downloaded so i can try another local update and (maybe) reset the updater?
ALE-L02
Enviado desde mi ALE-L02 mediante Tapatalk
ItalianWolf said:
yes, first time folder custom (renamed to dload, local update, reboot, 100% success), second time folder dload (local update, reboot, 100% success)
Phone seems working without problems, it's strange; Someone can upload the update package (329MB) when downloaded so i can try another local update and (maybe) reset the updater?
Click to expand...
Click to collapse
but the package is only an upgrade, while you've installed all the firmware, which is much better.
italianwolf ,Which version of Android seems to me about the firmware....b171? to me android 5.0.1
5.0.1 as before update
Edit:
Ma sari mica polisnew sul forum androidiani?
ItalianWolf said:
5.0.1 as before update
Edit:
Ma sari mica polisnew sul forum androidiani?
Click to expand...
Click to collapse
ok, the version 5.0.2 not exsit
What about B160?
mikel10k said:
What about B160?
Click to expand...
Click to collapse
....b160 is the firmware brand tim
Can i flash some non-branded version?
mikel10k said:
Can i flash some non-branded version?
Click to expand...
Click to collapse
yes, but lose the warranty
can this be used on ale-l02?
trulalueclav said:
can this be used on ale-l02?
Click to expand...
Click to collapse
truelalueclav for you there is this:
http://www.carbontesla.com/2015/09/huawei-p8-lite-l02-c636b150-lollipop-firmware/
My installation fails at 0% all the time on my b170 single sim. Any suggestions?

Change Vendor/Region on same fw version -is that safe?

Well, I own a CRR-L09 Swisscom branded device(vendor=Vodafone/country=ch), updated first to unbranded LP B145, now on MM B321 and all good so far except for LTE band 4 not working on my carrier(Claro) while it does on other carrier, obviously on same band.
So my question is: If the firmware version I´m using now is good for both Vodafone/ch and hw/eu, is it safe to simply use 004´s oeminfo.img tool to change that file only? Then I´d change /data/custom.bin,too.
Thanks in advance.
P.S.: It would be very nice if someone could share an oeminfo file from hw/eu B303/B321 device. It is located in /dev/block/platform/hi_mci.0/by-name/ (ES explorer w/root access needed).

It seems there are updates bu I'm stuck on B170

Hello,
I have a PRA-LX1 C432 unbranded and the updater keep saying I have the latest official update B170.
Using HFF we can see B181, 183 and 191 for C432 model. But... making a system dump of these builds we can see that there is in build.prop "generic_15" as phone model...
So I didn't install anything...
- Are the builds from HFF trustables ??
- Is there a way to force the update?
thanks!
sambastrakan said:
Hello,
I have a PRA-LX1 C432 unbranded and the updater keep saying I have the latest official update B170.
Using HFF we can see B181, 183 and 191 for C432 model. But... making a system dump of these builds we can see that there is in build.prop "generic_15" as phone model...
So I didn't install anything...
- Are the builds from HFF trustables ??
- Is there a way to force the update?
thanks!
Click to expand...
Click to collapse
Same I'm on B115 and there is up to B191 but only B181 passes check from B115 so will try it but pretty sure it will fail I'm sure from having this phone before you have start B110 and work way up they seem to have disabled manual update like use to on 5X 6X *#*# method don't seem to work anymore but I'm gunnar try anyway
Sent from my PRA-LX1 using Tapatalk
Tried going back to B110 but fails and tried newer ones same just fail every time
Sent from my PRA-LX1 using Tapatalk
I have same problem.... Im still on B175, no new updates in updater.
Sparco21 said:
I have same problem.... Im still on B175, no new updates in updater.
Click to expand...
Click to collapse
I wonder if we will see 8.0, I think all the different build numbers are region based I wonder if any of the p9 lite Roms would work as technically same device PRA-LX1 isn't it
Sent from my PRA-LX1 using Tapatalk
I unlocked my bootloader last night and warns it will wipe, well after the wipe and reboot all system apps like play store browser keyboard were gone I could not do anything other than do a erecovery and that didn't work so had to do a hard factory reset its all working now again but no twrp recovery, weird as
Sent from my PRA-LX1 using Tapatalk
Huawei is a mess...
thnaks for answers !
I tried update to B191 from B115 via Twrp tried flash first file update.zip but just fails, is it cos I left zipped should I unpack it?
Sent from my PRA-LX1 using Tapatalk
I was able to update to B181 with Firmware Finder, but nothing more...
islandman75 said:
I was able to update to B181 with Firmware Finder, but nothing more...
Click to expand...
Click to collapse
But there are more than one build 181, do you know which one you installed ?
your device name continues to be PRA-LX1 or moved to "generic_15" ?
Anything consistent in this update ?
thanks
sambastrakan said:
But there are more than one build 181, do you know which one you installed ?
your device name continues to be PRA-LX1 or moved to "generic_15" ?
Anything consistent in this update ?
thanks
Click to expand...
Click to collapse
Installed the FULL-OTA 181, and after that name didn't change to generic, stayed PRA-LX1... B181
islandman75 said:
Installed the FULL-OTA 181, and after that name didn't change to generic, stayed PRA-LX1... B181
Click to expand...
Click to collapse
Thanks
Problem is that HFF gives a list of something like 5 packages Full OTA for PRA-LX1C432...
Don´t know the diferences between packages ...
sambastrakan said:
Thanks
Problem is that HFF gives a list of something like 5 packages Full OTA for PRA-LX1C432...
Don´t know the diferences between packages ...
Click to expand...
Click to collapse
Yeah, forgot to say, the main difference was passing from EMUI 5.0 to EMUI 5.0.1
Any instructions how to flash with ff?

Ajuda para atualizar meu dispositivo (após Root/Magisk/build.prop)

Hello everyone, I need a little help. I bought a MiA2 in October 2018, which unlocked the bootloader, installed the Magisk module and changed the line of code through build.prop to get the Camera2Api. I was stuck in the November 2018 update and would like to know, in your opinion what would be the best method for me to have my device updated again and consequently get Android 9 installed?
GuiCv said:
Hello everyone, I need a little help. I bought a MiA2 in October 2018, which unlocked the bootloader, installed the Magisk module and changed the line of code through build.prop to get the Camera2Api. I was stuck in the November 2018 update and would like to know, in your opinion what would be the best method for me to have my device updated again and consequently get Android 9 installed?
Click to expand...
Click to collapse
Download the latest flashable from miui roms
http://en.miui.com/download-353.html
which is 10.0.8.0, clean flash it via Mi tool and after update via ota to 10.0.9.0. Important is at mi flash to check clean all not clean all and relock also not keep data because u r changing from oreo to pie. Other solution is to restore original boot.img, factory reset (because changing from oreo to pie) and update via ota to pie. You have to restore boot.img by flashing original boot.img via fastboot and not by magisk because causes bootloop. I think the clean flash is the better solution.

Categories

Resources