Hi guys!
So I have a problem...
It all started a couple of weeks back, when I got my new phone. I booted it up, had 4G connection, rooted it, put in ARHD and still had 4G. I then updated to a new radio found on the forum, 1.29.401.12.
When I did that, I lost my 4G... I then asked around to find a stock telenor norway radio, and "phewBAR" uploaded one to me, in the form of a .img file. ( LINK TO FILE: https://docs.google.com/file/d/0B4j0jjrgwiFwY2VzdDREZ2ZhV0E/edit
I didn't know how to install it, so I asked for that aswell, and "MacHackz" made the .zip flashable file that I've linked here -> https://www.dropbox.com/s/oz8b0mdjlmxotg7/RadioStock-signed.zip
I did the flash, and still no 4G
does anybody know how the hell I get my 4G back? Very annoying without it...
I don't know that much about radio-flashing, so probably shouldn't have done it in the first place...
If anybody needs any screenshots of anything, please let me know! I also went into the menu at *#*#4636#*#* -> phone information -> and set the settings to GSM/WCDMA/LTE Auto.
In norway we use both the 1800MHz and the 2600MHz frequencies.
does anybody know how to help me ?
Thanks in advance people
Here are my screenshots (PS. I always set it to GSM/WCDMA/LTE Auto, but it goes back to only WCDMA as you can see in the screenshot)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I came to think of a thing ... I think it first occurred when I updated to a 4.2.2 radio? Maybe phewBAR sent me his 4.2.2 radio backup?
Sent from my HTC One using xda premium
Bump
Anybody?
what's your radio sw version?
settings / about / software information / more / baseband version.
Sent from a pizza..
millicent said:
what's your radio sw version?
settings / about / software information / more / baseband version.
Sent from a pizza..
Click to expand...
Click to collapse
4A.16.3250.24_10.38.1150.03L
Sent from my HTC One using xda premium
you seem to have the most up-to-date radio out there.
I have switched a couple radios myself, can't say any is perfect, I find my phone to revert quite often to hsdpa or even 3g, on the other hand in better coverage areas such at my work place downtown it stays on solid lte..
Did you try to flash the other 2 radio versions?
in any case, provided neither radio works, I suggest you go back to stock and let your carrier or HTC to deal with this under the warranty.
good luck!
Sent from a pizza..
thanks so far - but one more question though ;
Are there only 3 different radio-types for the international version? Would you mind linking me? If I flash those three and none of them work, then I'll know it's my phone and not software
afaik, the sw versions of the radios are shared on all hw versions (well all except the one cdma radio I think) which is quite fine for us. this said, it might be less useful to try older versions (seeing you're already on latest), however you can give it a try.
there's a thread on this in the general one section, you might wanna try to use the search tool under a desktop browser, otherwise I can leave you a Dropbox link. the latter might take a while as I don't have access to my machine right now,..
so lemme know how you manage to get this to work
Sent from a pizza..
---------- Post added at 08:40 AM ---------- Previous post was at 08:33 AM ----------
I got to find it quite easily by using the query 'HTC one radio' search in title only, the only result..
http://forum.xda-developers.com/showthread.php?p=42612909
Sent from a pizza..
millicent said:
afaik, the sw versions of the radios are shared on all hw versions (well all except the one cdma radio I think) which is quite fine for us. this said, it might be less useful to try older versions (seeing you're already on latest), however you can give it a try.
there's a thread on this in the general one section, you might wanna try to use the search tool under a desktop browser, otherwise I can leave you a Dropbox link. the latter might take a while as I don't have access to my machine right now,..
so lemme know how you manage to get this to work
Sent from a pizza..
---------- Post added at 08:40 AM ---------- Previous post was at 08:33 AM ----------
I got to find it quite easily by using the query 'HTC one radio' search in title only, the only result..
http://forum.xda-developers.com/showthread.php?p=42612909
Sent from a pizza..
Click to expand...
Click to collapse
Yeah, well now I've tried all radios available and compatible, but nothing seems to help... is there anything I can do in build.prop? I saw that someone added/changed some lines for the Nexus4, to enable 4G. I tired adding those lines, but it didn't help; probably need something more spesific for the One?
I've also tried flashing TrickDroid GE, but that didn't help either... I feel hopeless :'(
ipwngeek said:
Yeah, well now I've tried all radios available and compatible, but nothing seems to help... is there anything I can do in build.prop? I saw that someone added/changed some lines for the Nexus4, to enable 4G. I tired adding those lines, but it didn't help; probably need something more spesific for the One?
I've also tried flashing TrickDroid GE, but that didn't help either... I feel hopeless :'(
Click to expand...
Click to collapse
Not sure if this works on international phones, but try dialing *#*#INFO#*#* on your phone keypad. Select Phone Information, then "set preferred network type:" see what it says.
It does work, however it doesn't solve my problem
Sent from my HTC One using xda premium
Maybe I can help, what is your cid and baseband version? Should start with 1.29 or 1. Something
Sent from my HTC One using xda app-developers app
Where do I check that? Do you mean the baseband version in 'about'? If it's that, then it's: 4A.17.3250.14_10.39.1150.04L
If I found the right number, then this is my cid: 2.19.401.1!
Can you help?
Sent from my HTC One using xda premium
Bump? Is there honestly nobody out there that can help? PLEASE?
ipwngeek said:
Bump? Is there honestly nobody out there that can help? PLEASE?
Click to expand...
Click to collapse
You could try flashing the latest version of ARHD (12.0) and see if that solves your problem
No help... Stock ROM is the only thing that gives me 4G. only if I go all the way back to stock, no mods, super kernels, ROM or newer radio... WHY THE FRACK?!
ipwngeek said:
No help... Stock ROM is the only thing that gives me 4G. only if I go all the way back to stock, no mods, super kernels, ROM or newer radio... WHY THE FRACK?!
Click to expand...
Click to collapse
did you try to change your cid to super cid and run stock RUU, I use this method to fixed no 4G signal problem
1. I have no idea how, but I'll search for it around the forum later today!
2. I really want to keep trickdroid and my mods... I can't do that with a stock RUU can I?
ipwngeek said:
1. I have no idea how, but I'll search for it around the forum later today!
2. I really want to keep trickdroid and my mods... I can't do that with a stock RUU can I?
Click to expand...
Click to collapse
Hi ipwngeek,
I've got the same problem as yours. my HTC one Hong Kong ver never switch back to 4g lte network , as HK LTE same as Norway, maybe my solution could help. it's work for me and it's simple.
1. back to stock rom
2. use fastboot flash in the stock recovey.img
3. factory reset in Hboot
4. reboot and see if your phone can get into 4g network now.
5. finish , you can flash your trickdroid back.
good luck
I have no idea how to do that. A guide would be nice, as I don't have access to a a computer for the next 11 days
Sent from my HTC One using xda premium
Related
Hey I was wondering if someone could give me a step by step instructions on how to switch prls I want to try a modified one like the .0001 I saw awhile back I have the demo version of cdma workshop on my win7 64bit pc but I can't figure out how to use it I've dialed ##diag# but nothing happens I'm on nfx stock sprint Rom right now with kifs 9.4 tweak. Thx in advance
Sent from my DROIDX using XDA Premium App
There are several ways to load a new PRL onto your Hero.
Assuming you already know your 6-digit MSL number and have the .PRL file you want, you can:
1. Dial ##775# --> Update PRL (Load from SDcard)
2. Dial ##778# --> PRL --> Update PRL (Load from SDcard)
3. QPST--> Service Programming--> Choose PRL from computer hard drive
These are just a few methods, but I don't know exactly what your starting point is (ie: whether or not you know how to put files on the SDcard, etc..)
Bierce22 said:
Hey I was wondering if someone could give me a step by step instructions on how to switch prls I want to try a modified one like the .0001 I saw awhile back I have the demo version of cdma workshop on my win7 64bit pc but I can't figure out how to use it I've dialed ##diag# but nothing happens I'm on nfx stock sprint Rom right now with kifs 9.4 tweak. Thx in advance
Sent from my DROIDX using XDA Premium App
Click to expand...
Click to collapse
look for heroc member "oostah" - He just posted in the cm7 thread that he flashed an eris vzw radio and an evo prl, he may be able to help you...
The problem is I tried that and ##prl# dosnt work on nfxs stock Sprint Rom witch is what I use for my data codes I tried a Zen Rom awhile back that someone said worked but everytime I tried to update the prl it forced closed is there a reliable Rom it works,on
Sent from my DROIDX using XDA Premium App
Also I'm assuming the prl would need to be on the root of my SD card right,
Sent from my DROIDX using XDA Premium App
il Duce said:
look for heroc member "oostah" - He just posted in the cm7 thread that he flashed an eris vzw radio and an evo prl, he may be able to help you...
Click to expand...
Click to collapse
im here first off "ONLY FLASH CDMA RADIO" "I AM NOT RESPONSIBLE FOR YOUR PHONE"
heres a good link for instructions and radios. the XDA wiki is a good start to.
http://forum.xda-developers.com/wiki/index.php?title=Hero_CDMA
http://www.market4android.com/radios-for-htc-hero.php
here are some older prl
wsww.the-answerman.com/sidlist/prl/index.ap
heres a good link of info on prl info.
http://www.roamingzone.com/prl/
"make a nandroid backup"
it took me two days of trying deferent combos of radios and prl. im on alltel moved to a verizon market.
i used my stock rom that i made a backup right after root. you should be able to do this with a 2.1 sense rom.
for the radio follow the link above for instructions.
for prl download the prl and put it on the root of sdcard.
some downloads end in .rla just change it to .prl.
dial ##775# it will ask for pass word for me and most phones i have had on sprint and alltel is six 0 it would be "000000"
this is slow so let it do its thing.
theres atab for update prl select it.
theres a another window with two drop downs and a place to input prl. the first drop down make it show sd card.
leve the second one on "prl files(*prl)"
put your prl number in the thee rd spot would be like 12345.prl
if you hit your back button to drop down your key pad it will show you your prl's on your sdcard.
select the one you want to try and hit ok.
it will take you back to the update prl tab that you started with.
hit menu and hit commit. it will load and tell you it will reboot in 10sec.
after reboot you should have new prl. go to settings /about phone/ software information at the bottom will be your prl version.
run some test to make sure evdo works and cell calls txt mms. before you boot back to your restore.
i would just try prl updates read the link for what ones work.
hope this helps
Bierce22 said:
The problem is I tried that and ##prl# dosnt work on nfxs stock Sprint Rom witch is what I use for my data codes I tried a Zen Rom awhile back that someone said worked but everytime I tried to update the prl it forced closed is there a reliable Rom it works,on
Sent from my DROIDX using XDA Premium App
Click to expand...
Click to collapse
make sure you wipe everything three times will help. before you flash the rom you want to use for updates.
Thx oostah
Sent from my DROIDX using XDA Premium App
would i be able to try non sprint prls i guess the worst that could happen is ill loose data if it dosnt work right?
Bierce22 said:
Thx oostah
Sent from my DROIDX using XDA Premium App
Click to expand...
Click to collapse
any time. i will keep an eye on this thread if you need any thing that i can try to help with.
FYI, the 6 digit code where oostah said 000000 works for him, it usually wants your MSL, but 6 zeros may work too it seems. You can get that easily by grabbing "MSL reader" app in the market. I would also recommend getting the current, or known good stock PRL (sprint now is 60677 afaik) ON YOUR SD, in case the one you put in doesn't work and prevents you from being able to "update PRL" from about phone. That way you can follow these instructions and manually input the correct stock PRL - if the modified one doesn't work. Good Luck, and please report back your results.
Bierce22 said:
would i be able to try non sprint prls i guess the worst that could happen is ill loose data if it dosnt work right?
Click to expand...
Click to collapse
you can try any cdma. look at the link to prl's i put up before. theres a link on that page that takes you to Colorado prls most are out dated but still work. some older prl's work better than new ones.
il Duce said:
FYI, the 6 digit code where oostah said 000000 works for him, it usually wants your MSL, but 6 zeros may work too it seems. You can get that easily by grabbing "MSL reader" app in the market. I would also recommend getting the current, or known good stock PRL (sprint now is 60677 afaik) ON YOUR SD, in case the one you put in doesn't work and prevents you from being able to "update PRL" from about phone. That way you can follow these instructions and manually input the correct stock PRL - if the modified one doesn't work. Good Luck, and please report back your results.
Click to expand...
Click to collapse
thanks duce.
edit dose sprint let you do *228 t0 update prl? if so you can go back to your prl that way.
this from the roaming zone
60676 Smart Phones. Loss of "Local" Sprint coverage and 3G roaming in ND, MT and WY
some times a updated prl is not always better.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thats my current speed
Bierce22 said:
thats my current speed
Click to expand...
Click to collapse
without prl update.
here is the newest one unzip it put on the root of sdcard.
http://www.roamingzone.com/prl/
on that site i cant tell were to download it just has the list.
il Duce said:
look for heroc member "oostah" - He just posted in the cm7 thread that he flashed an eris vzw radio and an evo prl, he may be able to help you...
Click to expand...
Click to collapse
i want to try the evo prl if u still have it oostah and i heard after the latest sprint software update that fixed the dialer lag took out ##775# and if u used the older dialer it would work so could i just swap out the dialer apk and it would work and if so does anyone have a link to the apk that would be great lol
Bierce22 said:
i want to try the evo prl if u still have it oostah and i heard after the latest sprint software update that fixed the dialer lag took out ##775# and if u used the older dialer it would work so could i just swap out the dialer apk and it would work and if so does anyone have a link to the apk that would be great lol
Click to expand...
Click to collapse
i read a post today that some used this 2.1 rom to update there prl.
http://forum.xda-developers.com/showthread.php?t=1010112
i put all three in in here start at 00001 work up. the middle one worked the best for speed for me.
Thx a lot man
Sent from my DROIDX using XDA Premium App
Bierce22 said:
Thx a lot man
Sent from my DROIDX using XDA Premium App
Click to expand...
Click to collapse
any time
Work is continuing here. Yes, I am back on XDA.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Downloads:
- OTA_HOLIDAY_ICS_35_S_Telstra_WWE_3.25.841.4-2.27.841.6_release_246841orcrrx41z400ii83.zip <- Original OTA zip if you feel like playing around.
Also feel free to donate to PG for all the effort he put in!
I'll accept donations if you think I deserve it
You can see PG's blog post here. PG HAS COPPED ENOUGH FLAK AS IT IS, NO TROLLING!
So is it similar to att release, ie sense 3.6.
Sent from my HTC Raider X710e using XDA
zombie.raised said:
So is it similar to att release, ie sense 3.6.
Sent from my HTC Raider X710e using XDA
Click to expand...
Click to collapse
Someone in the thread in the general forum had a screen shot showing sense 3.6. Looks like that's all we're gonna get till someone can port 4.0 over. Hopefully Bell n Rogers start rolling theirs out soon
Yes I hope Bell releases one update too...
Sent from my HTC Raider X710e using XDA
I have no doubt that the other carriers will follow suit soon.
If anything (don't hold me to this), they should release the ICS update within at least a week after.
How to install
king of demons said:
How to install
Click to expand...
Click to collapse
This would depend on which device.
If you have a Velocity 4G, then download this file (speed depends on YOUR internet connection, as there is no wait times or speed limits). Then try renaming it to PH39IMG.zip and putting it on the root of your SD Card. If it doesn't work then please let me know so I can make one that will.
If it is a Vivid you have, then you are best looking here.
If you have a Raider 4G, then you'll need to wait.
UPDATE:
Refer to OP
Leigh Kennedy said:
This would depend on which device.
If you have a Velocity 4G, then download this file (speed depends on YOUR internet connection, as there is no wait times or speed limits). Then try renaming it to PH139G.zip and putting it on the root of your SD Card. If it doesn't work then please let me know so I can make one that will.
If it is a Vivid you have, then you are best looking here.
If you have a Raider 4G, then you'll need to wait.
Click to expand...
Click to collapse
my mobile
Velocity 4G X710s
Update
PirateGhost has brought to my attention that he has cracked the issues.
Check it his article here.
Please guys, no trolling.
Leigh Kennedy said:
Update
PirateGhost has brought to my attention that he has cracked the issues.
Check it his article here.
Please guys, no trolling.
Click to expand...
Click to collapse
Do you think working with
my mobile
Velocity 4G X710s
---------- Post added at 08:32 AM ---------- Previous post was at 08:18 AM ----------
Leigh Kennedy said:
Update
PirateGhost has brought to my attention that he has cracked the issues.
Check it his article here.
Please guys, no trolling.
Click to expand...
Click to collapse
not work
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@king of demons: Your device ID must match. Each region has a different device ID, as far as I know, and HBOOTs have only been released for Telstra and AT&T right now. You're going to have to wait.
Aus_Azn said:
@king of demons: Your device ID must match. Each region has a different device ID, as far as I know, and HBOOTs have only been released for Telstra and AT&T right now. You're going to have to wait.
Click to expand...
Click to collapse
People need to read... Seriously... Wow.. no wonder the devs leave and get so abrupt, Yeh laziness is phenomenal
Sent from my HTC Velocity 4G using XDA
Aus_Azn said:
@king of demons: Your device ID must match. Each region has a different device ID, as far as I know, and HBOOTs have only been released for Telstra and AT&T right now. You're going to have to wait.
Click to expand...
Click to collapse
ok i'm waiting
naturalb0rnkiwi said:
People need to read... Seriously... Wow.. no wonder the devs leave and get so abrupt, Yeh laziness is phenomenal
Sent from my HTC Velocity 4G using XDA
Click to expand...
Click to collapse
I couldn't agree more.
I'll seriously be reporting to a mod if any more malaki arises.
What has happened as a result of such idiocy recently is beyond a flipping joke...
English isn't his first language, which is more than obvious. cut him a little slack.
Sent from my HTC Raider X710e using XDA
omgzilla85 said:
English isn't his first language, which is more than obvious. cut him a little slack.
Sent from my HTC Raider X710e using XDA
Click to expand...
Click to collapse
Understandable, yet not really the point, a little light reading over a couple of forum posts over the past week would answer 90% of the posted questions on here.. not just in this case, but I'm talking forum wide... Anyhow enough rant..
Sent from my HTC Velocity 4G using XDA
Anyone having issues getting Perm Root? Busy Box is complaining it can not get root access to install (and hence Titanium will not run).
I followed PG's guide to move from VJ's ROM just fine and I thought from PG's guide the ICS ROM was rooted by default, anyway - I've now tried:
- Vivid All in One Kit
Then installing from recovery the following
- VIVID_CWM_ROOT.ZIP
- su-2.3.6.3-efgh-signed.zip
After installing the ZIP's then rebooting I see the phone "updating andriod" mmm.
Any ideas?
Thanks
Nathan
omgzilla85 said:
English isn't his first language, which is more than obvious. cut him a little slack.
Sent from my HTC Raider X710e using XDA
Click to expand...
Click to collapse
Okay, a Chinese translation may be in order then. I'll have that ready soon.
jmone said:
Anyone having issues getting Perm Root? Busy Box is complaining it can not get root access to install (and hence Titanium will not run).
I followed PG's guide to move from VJ's ROM just fine and I thought from PG's guide the ICS ROM was rooted by default, anyway - I've now tried:
- Vivid All in One Kit
Then installing from recovery the following
- VIVID_CWM_ROOT.ZIP
- su-2.3.6.3-efgh-signed.zip
After installing the ZIP's then rebooting I see the phone "updating andriod" mmm.
Any ideas?
Thanks
Nathan
Click to expand...
Click to collapse
Patience is all I can suggest as PG is working on the issues.
With the different timezones, I'm quite sure he could be sleeping.
Leigh Kennedy said:
Okay, a Chinese translation may be in order then. I'll have that ready soon.
Click to expand...
Click to collapse
Great,man. Although i can read/speak English, i still prefer Chinese
This tool will grant you Super CID on your HTC Device
Tested on the following devices:
HTC One M7_UL
HTC One M7_WLS
HTC One X/XL Evita
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is a CID?
CID lock (aka vendor lock): Carrier Id - put on your device by the manufacturer to prevent installation of a ROM not released by them. Commonly used in the form `CID-Unlocking`. If you purchase your phone (example) from 3Mobile (3Mobile is the ‘carrier’), your phone will only accept 3Mobile ROMs (the carrier’s ROMs). If you want to flash ROMs from other carrier, you’ll need to CID-unlock your phone, so that your phone will accept other ROMs. All bootloaders (apart from HardSPL and SSPL) will only allow a ROM with the correct CID to be flashed onto the device. A device which has been CID unlocked will have ‘SuperCID’ which allows ANY ROM to be loaded onto the device, SuperCID also unlocks the Ext_ROM and allows it to be mounted. Note: In general, the phrase ‘unlock your phone’ usually refers to SIM-unlock, not CID unlock.
What is Super CID?
SuperCID : by CID unlocking your device the value of the CID is changed to SuperCID . This allows the flashing of ANY ROM/RUU to the device regardless of the carrier and also unlocks the read/write capability of the Ext_ROM.
How to use the script?
Download the attached file
Extract the file
boot your phone into bootloader
Run the script and follow the on screen instructions
How do i get my phone into bootloader?
Power down the device
hold vol down and power at the same time
You can Download the script for Windows here http://forums.team-nocturnal.com/showthread.php/3157-Script-Super-CID-for-HTC-S-Off-Devices
I know this isnt really needed for the CDMA model but if boost or virgin ever get the One, it will come in handy for RUU's
Real cool XS, Thanks.
Going to do it right now, you never know.
Let me get this right....if we do this to our device,we can flash roms from other varients???Im hype if so
Sent from my HTCONE using xda premium
215Aphillyated said:
Let me get this right....if we do this to our device,we can flash roms from other varients???Im hype if so
Sent from my HTCONE using xda premium
Click to expand...
Click to collapse
Yes but it would be a huge mistake to do so with a Sprint One.
215Aphillyated said:
Let me get this right....if we do this to our device,we can flash roms from other varients???Im hype if so
Sent from my HTCONE using xda premium
Click to expand...
Click to collapse
I would also like to ask if we have to ruu to the other carriers before we can flash their custom roms? Renovate Rom for international version is now 4.2.2 so if I supercid can I flash that Rom without any problems? It has a no compatible boot.img which won't let it boot before using supercid. I would like to use that Rom being 4.2.2 but would like to know if I supercid that would make it possible? Thanks to those with knowledge that may be able to give me the correct answer.
Sent from my HTCONE using Xparent Blue Tapatalk 2
Thanks for the advice,and definitly will listen to it
treIII said:
I would also like to ask if we have to ruu to the other carriers before we can flash their custom roms? Renovate Rom for international version is now 4.2.2 so if I supercid can I flash that Rom without any problems? It has a no compatible boot.img which won't let it boot before using supercid. I would like to use that Rom being 4.2.2 but would like to know if I supercid that would make it possible? Thanks to those with knowledge that may be able to give me the correct answer.
Sent from my HTCONE using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
no no, this will only let you run RUU's for a WLS model so if lets say Boost mobile gets the HTC one, Someone can take that ruu and flash it to the sprint device or sprint to boost. not from other models like the UL, that is a different device. the CDMA HTC One is the WLS model, the GSM versions are UL models. Dont mix them.
XsMagical said:
no no, this will only let you run RUU's for a WLS model so if lets say Boost mobile gets the HTC one, Someone can take that ruu and flash it to the sprint device or sprint to boost. not from other models like the UL, that is a different device. the CDMA HTC One is the WLS model, the GSM versions are UL models. Dont mix them.
Click to expand...
Click to collapse
Thank you. This is very important but the op says we can flash roms from any carriers. That probably should be corrected.
Sent from my HTCONE using Xparent Blue Tapatalk 2
Thanks XS! Rock on my man
Sent from my HTCONE using Tapatalk 4 Beta
Painless.
-Cupper- said:
Painless.
Click to expand...
Click to collapse
i keep getting fastboot not recognized command?
I got it Thanks for the help...
networx2002 said:
i keep getting fastboot not recognized command?
Click to expand...
Click to collapse
Do you have the latest HTC drivers?
Stroked from my Dirty Nocturnal'd HTC M7
So basically doing this super cid for the sprint model is useless because by flashing other roms like the international ones won't work because there gsm and not cdma right? So basically you will lose LTE or can you actually brick the phone by flashing gsm roms. Just trying to understand more about this. Sorry for the noob questions but don't want to brick this bad boy. Thanks for any advice in advance.
Does this script give you true CID. Does it include this? http://forum.xda-developers.com/showpost.php?p=42363400&postcount=84
Sent from my HTCONE using Tapatalk 2
It gives you enough power to install another ruu for same model phone but under a different carrier. Now if you want to take that next step then go ahead but it's risky and pointless for the wls phones. It's not like it's going to let you install a ruu from the UL models... Your still restricted to WLS only.
Stroked from my Dirty Nocturnal'd HTC M7
XsMagical said:
It gives you enough power to install another ruu for same model phone but under a different carrier. Now if you want to take that next step then go ahead but it's risky and pointless for the wls phones. It's not like it's going to let you install a ruu from the UL models... Your still restricted to WLS only.
Stroked from my Dirty Nocturnal'd HTC M7
Click to expand...
Click to collapse
So what carriers are wks? Thanks
Sent from my HTCONE using Xparent Blue Tapatalk 2
Will this change my hboot?
Sent from my HTCONE using Tapatalk 4 Beta
What is the point for super CID, my understanding is that it allows you to use any RUU but isn't it pointless since the Sprint variant is different... it seems like everyone is doing it for the sake of doing it. We can't use any other RUU regardless to debrand, etc... I'm guessing this will be useful later on for Boost versions if and when it comes out.
im0rtalz said:
What is the point for super CID, my understanding is that it allows you to use any RUU but isn't it pointless since the Sprint variant is different... it seems like everyone is doing it for the sake of doing it. We can't use any other RUU regardless to debrand, etc... I'm guessing this will be useful later on for Boost versions if and when it comes out.
Click to expand...
Click to collapse
That's about it, that's why I posted in the op, if virgin or boost ever get the one and someone has a flashed phone, a ruu would come in handy if they ever go that route. I only posted so you guys would have it for the future. I'm curious on what the Verizon model will be if not the same as sprint, then it will really come in handy but I doubt VZW will ever let htc go that route.
Stroked from my Dirty Nocturnal'd HTC M7
The current Sprint Corporate PRL is 56019
I will update this thread when a new PRL is released.
PRL Information and Updating:
bigdaddy619 - [Tutorial][On The Fly PRL Change]PRL Changes Without a PC - How to update your PRL from your phone
chas123 - [MOD] Update PRL from Phone UPDATE - An EPST fix for some roms
Write PRL with CDMA Workshop - How to write your PRL with CDMA Workshop if EPST isn't working
Sprint HTC One Radios:
thoughtlesskyle - 5.03.651.3 Firmware - Link to the latest radio for the Sprint HTC One ... 1.01.20.0515
the.emilio - Sprint HTC One Radios - Link to old radios for the Sprint HTC One
If you have a link that you think is PRL or Radio related, please message it to me and I will add it here for quick reference.
Thank you so much. This worked perfectly. I hope you continue to update this thread for us!
Edit: I guess I was a little too excited and totally missed the part where you said you would continue to update the thread!
Ph33zy said:
Thank you so much. This worked perfectly. I hope you continue to update this thread for us!
Edit: I guess I was a little too excited and totally missed the part where you said you would continue to update the thread!
Click to expand...
Click to collapse
No problem. Glad it worked...
Sorry to ask, but what does this do? Also do we just flash in recovery?
Sent from my HTCONE using Tapatalk
Bairdog35 said:
Sorry to ask, but what does this do? Also do we just flash in recovery?
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
No you can not flash this zip file. There are lengthy discussions on XDA about PRLs
Being new to the PRL, the difference in this vs the standard 55xxx PRL is that the corporate version allows for 3G roaming on VZW?
jac1599 said:
Being new to the PRL, the difference in this vs the standard 55xxx PRL is that the corporate version allows for 3G roaming on VZW?
Click to expand...
Click to collapse
Pretty much
Very nice thanks you sir
For some reason when I try to commit the prl I get stuck at please wait while committing changes. I'm running Viperrom and using ##778#
Sent from my HTC Butterfly s using Tapatalk
mustang_52 said:
For some reason when I try to commit the prl I get stuck at please wait while committing changes. I'm running Viperrom and using ##778#
Sent from my HTC Butterfly s using Tapatalk
Click to expand...
Click to collapse
Me too, I wonder if it's a rom issue.
Sent from my HTC Butterfly s using XDA Premium 4 mobile app
Cetus Corr said:
Me too, I wonder if it's a rom issue.
Sent from my HTC Butterfly s using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Try the MOD in post 1 to get it working ##778# does not work on most roms
Think your device signature being a Butterfly S might be the crux? I'm using viper as well, but with a fixed build.prop.
Sent from my HTCONE using xda app-developers app
What should it be set to?
Sent from my HTC Butterfly s using Tapatalk
---------- Post added at 08:10 AM ---------- Previous post was at 08:02 AM ----------
I just did the mod but had to change it back to sku 10 and then it worked. Thank you
Sent from my HTC Butterfly s using Tapatalk
For the life of me, I can't figure this out. I can't get EPST to work on my phone. I am running the stock 4.3 ROM, rooted.
I have tried:
Bigdaddy619's method:
Editing build.prop and restarting
Verified the change saved, it did
##778# = nothing
Chas123's method:
edited default.xml
flashed EPST_only.zip
##778# = nothing
Reverted default.xml back to original
flashed EPST_only.zip
##778 = nothing.
I was finally able to change it with CDMA workshop.
Now, is there any way to force roaming on the stock ROM?
thx OP!!!
jac1599 said:
For the life of me, I can't figure this out. I can't get EPST to work on my phone. I am running the stock 4.3 ROM, rooted.
I have tried:
Bigdaddy619's method:
Editing build.prop and restarting
Verified the change saved, it did
##778# = nothing
Chas123's method:
edited default.xml
flashed EPST_only.zip
##778# = nothing
Reverted default.xml back to original
flashed EPST_only.zip
##778 = nothing.
Is there any way to update the PRL using a computer instead of doing it on the phone?
Click to expand...
Click to collapse
you need the hacked EPST that Chas123 posted...see OP
O.M.J said:
thx OP!!!
you need the hacked EPST that Chas123 posted...see OP
Click to expand...
Click to collapse
I am trying to make the 1st post contain links to all the related fixes and other useful links (since sometimes the PRL/EPST fixes get hidden in a long thread and it is a PITA to search for each individual one)
If anyone finds one they think should be listed please message it to me and I will add it to the list (do not just mention it in the thread because there is a good chance I will overlook it).
jac1599 said:
For the life of me, I can't figure this out. I can't get EPST to work on my phone. I am running the stock 4.3 ROM, rooted.
I have tried:
Bigdaddy619's method:
Editing build.prop and restarting
Verified the change saved, it did
##778# = nothing
Chas123's method:
edited default.xml
flashed EPST_only.zip
##778# = nothing
Reverted default.xml back to original
flashed EPST_only.zip
##778 = nothing.
I was finally able to change it with CDMA workshop.
Now, is there any way to force roaming on the stock ROM?
Click to expand...
Click to collapse
Please let us know how you finally got it to work so we can add that to the 1st post in case other people have the same problem.
numus said:
Please let us know how you finally got it to work so we can add that to the 1st post in case other people have the same problem.
Click to expand...
Click to collapse
I started with this:
techwerkz said:
-Snip-
Please be very careful with CDMA Workshop. I am not responsible for your curiosity, or stupidity!
I have included screenshots for installing the drivers on Windows 7 x64. This seems to be a little different for most users, so I hope this helps. Windows XP should be pretty similar to below. You can enter Device Manager the same way. Some of the prompts will be slightly different, but at the end most of the same dialogs will appear.
Prerequisites:
CDMA Workshop - http://www.cdma-ware.com/workshop.html
The Demo version will be able to retrieve the MSL.
HTC Diag Drivers - http://www.techwerkz.com/evo/HTCDiagDrivers.zip
I have compiled this zip which includes both x86 (32 bit), and x64 (64 bit) drivers for HTC diagnostics. I have successfully tested the x64 drivers on Windows 7, and all works without issue.
The Fun Part
Step 1 - Dial ##DIAG# (##3424#) on your phone.
Step 2 - Connect the phone to the computer via the USB cable. When prompted to install the drivers use the drivers from the ZIP provided above.
Windows will probably not be able to find the drivers:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You will need to manually install the drivers from Device Manager. Quickest way to get there is to press the Windows Key + R to open the Run dialog. Type in devmgmt.msc:
Once Device Manager is open you will see it cannot find the HTC Diag driver :
Right click on HTC Diag, and go to Update Driver. You will be prompted with the following, choose Browse my Computer. Then choose Let me Pick. Click Next. Click Have Disk. Browse to the drivers you downloaded, and choose the proper INF file. Click Next. Then finally Yes, if prompted :
If all went well you will see it installing the driver. Then finally let you know it was successfully installed!
Step 3 - Run CDMA Workshop you downloaded earlier.
Click to expand...
Click to collapse
Then to update the PRL with CDMA Workshop do the following:
Select the correct port and click connect
Click read and verify your phone information is correct. Also note your current PRL version.
Select the "Other" tab and click write under "PRL"
Slect your .prl file that you downloaded and extracted.
You should get a success message
Reboot phone and verify PRL:
I only did this because I could not get EPST to work. Thanks for everyone that is helping me re-learn Android! (I switched to IOS when 2.3 was still out and just now switched back).
OK, so I got mine to update to 56017. All seems well. The problem is, when I use Roam Control to force roaming, I am connecting to Cricket Wireless on 1x? The guys on Verizon get an excellent connection here, so I know it is available. Any ideas?
Thanks for the info numus. I'm hoping that I can use this to find a PRL for my wife's note 3 so it won't drop calls or get a prl to test other providers voice services
I'm getting a message "device asks for SPC code" when I try to update the PRL via CDMA workshop.
Does this only work with rooted devices?
EDIT - If anyone else comes looking, here is a tutorial to get the SPC code without rooting.
http://www.youtube.com/watch?v=1OePkxGXsN0
I'm a repair technician that's wants to help a mother in need. Who can help me, help her?
She has no TEP aka insurance so she's dead in the water if I don't help her..
She came into the store with a RED M7 that won't boot past the HTC One screen. I've tried to factory reset but no go.. I downloaded a RUU from the development section but it errors out on me. I doubt she even knows how to root and un lock device. So any help since I don't really work on this device would be cool.. if not then at least I tried and thank you!
Sent from my 831C using Tapatalk
dincdoes.me said:
I'm a repair technician that's wants to help a mother in need. Who can help me, help her?
She has no TEP aka insurance so she's dead in the water if I don't help her..
She came into the store with a RED M7 that won't boot past the HTC One screen. I've tried to factory reset but no go.. I downloaded a RUU from the development section but it errors out on me. I doubt she even knows how to root and un lock device. So any help since I don't really work on this device would be cool.. if not then at least I tried and thank you!
Sent from my 831C using Tapatalk
Click to expand...
Click to collapse
What type of errors are you getting when you run the RUU?
Did you re-lock the bootloader before running the RUU?
If you can access the bootloader it can most likely be saved...just need more info.
dincdoes.me said:
I'm a repair technician that's wants to help a mother in need. Who can help me, help her?
She has no TEP aka insurance so she's dead in the water if I don't help her..
She came into the store with a RED M7 that won't boot past the HTC One screen. I've tried to factory reset but no go.. I downloaded a RUU from the development section but it errors out on me. I doubt she even knows how to root and un lock device. So any help since I don't really work on this device would be cool.. if not then at least I tried and thank you!
Sent from my 831C using Tapatalk
Click to expand...
Click to collapse
If u have access to the hboot the device can most likely be saved. Access the hboot and post the information from the top of the device that would probably help us out abit. While we are no experts, the people around here seem to know abit more then the average folk so it's nice to see a repair technician amongst us.
RUU must be run with a locked/relocked bootloader unless the device is s-off also note not all RUUs will work if the hboot has is not on the version previous to the RUU version at least, being on a version passed it does not affect it and will give u the ok. If not s-off its impossible to go to a previous software version meaning if she's on a update with no available RUU then running a older RUU will failed 100% of the time.
Sent from my HTCONE using Tapatalk
luigi311 said:
If u have access to the hboot the device can most likely be saved. Access the hboot and post the information from the top of the device that would probably help us out abit. While we are no experts, the people around here seem to know abit more then the average folk so it's nice to see a repair technician amongst us.
RUU must be run with a locked/relocked bootloader unless the device is s-off also note not all RUUs will work if the hboot has is not on the version previous to the RUU version at least, being on a version passed it does not affect it and will give u the ok. If not s-off its impossible to go to a previous software version meaning if she's on a update with no available RUU then running a older RUU will failed 100% of the time.
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
I wish I would have snapped photos when I was at work.. and tha is for the kind words. If I had the device I would have more input but as soon as I start in a few hours I will if it helps. And to answer a couple of your questions I can get into hboot and bootloader on her phone with no issues. I really doubt this mother of 2 would have time and I asked I was replied with a blank stare lol .. thanks for helping me try to solve this lady's issues...
Sent from my 831C using Tapatalk
Picture of bootloader
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hope that helps
Sent from my 831C using Tapatalk
And picture of me doing something I'm not supposed to do at work well it's up in the air anyway.. but a pic of the latest RUU I can find attempt to flash 5.03.651.2 odd part the ruu flashing tool states different ..
Sent from my 831C using Tapatalk
dincdoes.me said:
And picture of me doing something I'm not supposed to do at work well it's up in the air anyway.. but a pic of the latest RUU I can find attempt to flash 5.03.651.2 odd part the ruu flashing tool states different ..
Sent from my 831C using Tapatalk
Click to expand...
Click to collapse
Just a heads up, you're downgrading as the RUU screen says "From 4.06.651.9 to 3.04.651.2" which won't work unless you have S-OFF. And by your HBOOT screenshot, you have S-ON. You can S-OFF using firewater (Google it to know more if you'd like), but that voids your warranty (I think, not sure, I don't live in the U.S. anymore)
You can try following the steps here I found by Googling: http://www.theandroidsoul.com/downl...e-with-android-4-4-2-kitkat-build-5-03-651-3/
Be careful not to void the warranty though..
dincdoes.me said:
And picture of me doing something I'm not supposed to do at work well it's up in the air anyway.. but a pic of the latest RUU I can find attempt to flash 5.03.651.2 odd part the ruu flashing tool states different ..
Sent from my 831C using Tapatalk
Click to expand...
Click to collapse
look like you are trying to install older version. which will not work unless you s-off. try this one http://forum.xda-developers.com/showthread.php?t=2658910
or bootloader install TWRP and flash stock ROM from here
http://forum.xda-developers.com/showthread.php?t=2766604
See in your pic it says:
From
Image version 4.06.651.9
To
Image version 3.04.651.2
Since she is s-on these have to match or the "To" version has to be greater/newer then the "From" version.
The latest RUU available on XDA anyways, is 4.06.651.4, without a compatible RUU the only way to fix it would be to unlock the bootloader then follow my guide below.
But I don't know if that would be something she would want to do.
You can follow my guide found HERE and it will get you back up and running.
Use the 4.06.651.9 or 5.03.651.3 s-on firmware and roms.