Related
I have updated the phone to android 2.2.1 and after reboot it appears Samsung's logo, vibrate once, but then it goes to a black screen, vibrating something like this: "bzzz.....bzz-bzz.............bzzz....bzz-bzz...." and so on )
The phone didn't restarted by himself, I had to chose system reboot. There were some red lines, but I don't remember what they were saing, as I did not pay attention to them
The update was made through Kies. The phone was with 2.2 version and was rooted with some app from the market, don't remember which, and is from Orange Romania.
So...what I need to do? Does anyone knows? It's not even my phone, my brother has it, but I'm the one who wanted the update )
L.E.: LagFix was also installed on the phone and I think those errors was from some files which could not be edited or something like that...and please, I'm a little desperate...
CaracalSef said:
I have updated the phone to android 2.2.1 and after reboot it appears Samsung's logo, vibrate once, but then it goes to a black screen, vibrating something like this: "bzzz.....bzz-bzz.............bzzz....bzz-bzz...." and so on )
The phone didn't restarted by himself, I had to chose system reboot. There were some red lines, but I don't remember what they were saing, as I did not pay attention to them
The update was made through Kies. The phone was with 2.2 version and was rooted with some app from the market, don't remember which, and is from Orange Romania.
So...what I need to do? Does anyone knows? It's not even my phone, my brother has it, but I'm the one who wanted the update )
L.E.: LagFix was also installed on the phone and I think those errors was from some files which could not be edited or something like that...and please, I'm a little desperate...
Click to expand...
Click to collapse
Which firmware you had before update? 2.1 Eclair? Most known lagfixes supports for 2.2 froyo
Did you tried your luck with odin?
Thank you androidsl for reply. The phone had froyo 2.2. I don't know where to get odin, this is what I'm searching now. I am downloading I9000XXJPY.rar from samfirmware right now. After I'll get it, I will try to install it with odin, even if I never used it before
And that charghing battery appears on screen when I plug it in USB powered off like it's charging. If I turn it on, no sound as a new hardware detected hears, so it's posible to do anything with odin if my computer doesn't see the phone connected?
Another thing...I can't get the phone in download mode :| It must be the one with 3 buttons problem..damn! What can I do?
CaracalSef said:
Thank you androidsl for reply. The phone had froyo 2.2. I don't know where to get odin, this is what I'm searching now. I am downloading I9000XXJPY.rar from samfirmware right now. After I'll get it, I will try to install it with odin, even if I never used it before
And that charghing battery appears on screen when I plug it in USB powered off like it's charging. If I turn it on, no sound as a new hardware detected hears, so it's posible to do anything with odin if my computer doesn't see the phone connected?
Click to expand...
Click to collapse
My every post have a THANKS button. you can thank me from clicking on that
Did your phone have working 3 button download mode?
Press Volume down key and while holding that press home key. while keep pressing those two, press the power button and hold the all three keys until you saw the boot screen. then release all keys.
If you have a yellowish screen saying "Download mode, do not turn off the target", Man this is your lucky day
If I press those keys and release them after that samsung galaxy s logo, it gos into that black screen and vibrating thing again. If I keep pressing those 3 buttons for a long time it just rebooting continuously (samsung galaxy s logo appears-disappears-appears-disappears-appears-disappears etc until I release the buttons and goes into that black screen)
So, to be clear what is going on with the phone. It's turned off. I turn it on and it displays that samsung galaxy s gt-i9000 logo, then that animation with that sound..and that's all. After that..a black screen and vibrations
If you can not get to download mode that is a thing to consider. no download mode mean no odin
In that case i think you have to get a custom USB flashing cable to get into download mode. i saw ebay have that cable for a low price
http://forum.xda-developers.com/showthread.php?t=819551
Or return phone to vendor for repair .
jje
you need to hold vol down + home + power while the phones off and it should go into download mode.
what rom did you have before trying JPY?
My brother is leaving town after a few hours and he needed the phone. Eh...)
I will buy a microUSB cable and mod it for download mode. If that's not working...I will go with it on a service. Thank you guys. I thought that something could be done, even the 3 buttons method doesn't work
I was flashing this 3 button fix with Clockworkmod recovery. After applying the update from zip, everything seemed to be working fine, so I pulled the battery so I could test it out without having to use CWR's reboot option, then waiting for it to boot and shut off. When I tried to turn it back on, nothing happened. I tried to boot it with the recovery 3 button combo and it didn't respond(still a completely black screen).
Also, I'm not sure whether or not CWR was actually flashed. I was accessing using the update.zip found in this thread. When booting into recovery, I got into the normal recovery screen, and it was only after I hit "reinstall packages" that I got into CWR. It was through this method that I tried to install the 3-button fix.
What I've tried:
This key combo: http://forum.xda-developers.com/showthread.php?t=775911
The phone didn't respond at all.
Switching the battery for a fully charged one. Still no response.
Inserted my homemade USB jig to no avail. I've tested it with a different Captivate and I've confirmed that it works.
Anyone got any ideas or "magic" key combos I should try. If not, would it be possible to send it into Samsung/AT&T and get it repaired/replaced?
EDIT: I think I'm in the same situation as these guys: http://forum.xda-developers.com/showthread.php?t=977086
It's a build 1008 that I'm working with.
I'm on a similar issue. Phone is dead, no response to anything at all. Not even my previous jig that I used last time.
But it happened while I was flashing with Odin one click. Got stuck at the factoryfs.rfs step. Had to unplug it but after that I never came back up
I ordered a premade usb jig, and it'll arrive next week. If that doesn't work then I'm thinking of getting a cheap one off ebay, I can't spend another $500 considering this phone is only 4 months old.
The other choice is getting a broken phone for even less money, and replace the motherboard. But I don't know if there are considerable differences between phone batches.
I'll be Android-less for the next two weeks though, and that truly sucks.
Which build is your phone? It's located behind the battery to the left of one of the barcodes. I've heard that 2010 and 2012 break when used with odin one click.
Have you guys tried the volume up and down trick right after you put battery back in while its connected by usb to the PC? I bricked my phone to the point where it would not even turn on and finally was able to get it back into download by using that method. Kind of tricky but you plug phone into usb to pc. Take battery out, while holding volume up and down put battery in and keep holding until download screen comes up. I hope that works for you, if you havent tried yet
I have gone so far as to brick my phone to the point where it would not turn on. After a few hours it was only a screen RST_STATUS 0x0. The one post you linked says to hold vol up/down and power. But try not pressing power..only up and down. I could not get mine to do anything until I tried someone else's method of not pressing power and only volume buttons
I had a soft brick last night. Phone would start with Phone ++ PC connect picture, nothing else. And here's what I did to get into Download:
- Pull SIM out
- Pull MicroSD out
- Pull Battery out
- Put Battery back in
- Hold Vol Down button (only the vol down)
- Plug USB cable in
- Phone boots into Download mode
The 3-button or Vol UP and DN key trick didn't work. Only the Vol DN and USB plug-in worked for me. I hope you have good luck.
My first time using Odin One Click presented me with a similar situation, stalled after it said "DO NOT UNPLUG..." ... I don't have a Jig but nothing else I tried was working...Held down power button to be presented with a black screen, no backlight or anything...
Pulled the battery out, waited a full 30 seconds (battery pulls less than that didn't work for me) and put it back in, Volume Up + Down and plugged in USB and it worked.
Best of luck to you. I was feeling kind of queasy after finding out my first attempt at flashing could have been disastrous.
If you are hard bricked and have no response even with a JIG, I can still fix it for you. Just PM me for questions...
This happened a few times to me. I remove the battery, open odin one click, hold up and down vol buttons, then plug in the usb cable. It typically throws me.back into dl mode. Be sure you are using JV6 (see Icezar's post in Dev section) when going back to stock because it doesnt include bootloaders and makes hard bricking less likely.
-- SGS i897 Captivate using:
Continuum 5.41 w/ Talon 1.7 [rfs all, OC/UV, TW4, no theme, no tweaks enabled, & NETFLIX!)
tigersunlimited said:
I had a soft brick last night. Phone would start with Phone ++ PC connect picture, nothing else. And here's what I did to get into Download:
- Pull SIM out
- Pull MicroSD out
- Pull Battery out
- Put Battery back in
- Hold Vol Down button (only the vol down)
- Plug USB cable in
- Phone boots into Download mode
The 3-button or Vol UP and DN key trick didn't work. Only the Vol DN and USB plug-in worked for me. I hope you have good luck.
Click to expand...
Click to collapse
Oh thank u so much worked like a charm, wow. U saved my Sammy!
tigersunlimited said:
I had a soft brick last night. Phone would start with Phone ++ PC connect picture, nothing else. And here's what I did to get into Download:
- Pull SIM out
- Pull MicroSD out
- Pull Battery out
- Put Battery back in
- Hold Vol Down button (only the vol down)
- Plug USB cable in
- Phone boots into Download mode
The 3-button or Vol UP and DN key trick didn't work. Only the Vol DN and USB plug-in worked for me. I hope you have good luck.
Click to expand...
Click to collapse
Gosh!! you are genius!! Even USB was not working but you save my captivate.
Bricked Samsung galaxy s2 i1900t
connexion2005 said:
If you are hard bricked and have no response even with a JIG, I can still fix it for you. Just PM me for questions...
Click to expand...
Click to collapse
Hi
I tried upgrading from ice cream sandwich to jellybean and ended up bricking my phone when the flashing failed and I panicked and unplugged my phone. I think it failed because i was flashing something for a different model rather than the i1900t as this is the New Zealand/Australian model. I cant find any button combos that will put my phone into download mode and the phone doesn't turn on. The only life that it seems to exhibit is get warm around the sim card area when i put the battery in. Help.
drdigby said:
Hi
I tried upgrading from ice cream sandwich to jellybean and ended up bricking my phone when the flashing failed and I panicked and unplugged my phone. I think it failed because i was flashing something for a different model rather than the i1900t as this is the New Zealand/Australian model. I cant find any button combos that will put my phone into download mode and the phone doesn't turn on. The only life that it seems to exhibit is get warm around the sim card area when i put the battery in. Help.
Click to expand...
Click to collapse
Download mode is vol down+power on the GB bootloaders. But if a JIG doesn't get you in download mode, there are 2 possible reasons: 1st- Battery isn't charged. 2nd- Your phone is bricked.
If it's the 2nd one then your only hope is with mobiletechvideos .com (Connexion2005 on xda). He can use his JTAG to push the GB bootloaders into your phone.
hard bricked samsung captivate....3 buttons not working
connexion2005 said:
If you are hard bricked and have no response even with a JIG, I can still fix it for you. Just PM me for questions...
Click to expand...
Click to collapse
hi I hard bricked my handset Samsung captivate sgh i897 while flashing only the pit file with odin......after which I get a black screen and the 3 buttons not working......will you kindly guide me in unbricking
so i rooted my phone installed rom manager and flashed something like colckwork rom of hawai mini i switched of my mobile.Today in morning when i tried to tun it on it wont only a black screen no sound no logo no vibration I even tried to remove and insert battery but no luck.I think its a hard brick i got this mobile on 28 feb 2011 and it is still under 1 year warrenty of samsung so can i get a new mobile in place of it or just recover it.(I have the UK system here noot of USA)
can you tell me any way to unbrick it any any one
I have done something similar to my Samsung Vibrant. Rooted and was in process of installing new ROM when on restart got a screen that has Vibrant at the top of screen and Samsung on the bottom of screen then a blank black screen and then goen into a vibrating loop of single vibrate and then another single vibrate and then a triple vibrate and then it starts the loop over again. The only thing I can do is pull the battery to stop it. Anyone know of any thing I can do to correct this or to revert the ROM or anything?
Thank you
Larry
Take it to T-Mobile and say when you turned it on it was like this and they might send it off to be replaced.
i hate those people who wanna pay their insurance for their silly things and fails!
i hope, tmobile won't take it back.
let's see..it's really hard to brick a phone though.
had some problems with my further hd2 as well..yeah, you get really annoyed but if you chill out, in 99% of the cases you'll find a solution.
DN41
so guys i live in india here it is called galaxy pop i went to samsung service center and there they replaced my motherboard for free cause it was still in warranty .I will get it next tuesday
I have this model, too. But it is called GT-S5570. It works fine, but i bought it network lock. Have you succeded unlock it?
Had the same, the solution is simple:
Download the newest firmware at samfirmware.com
Use Odin Multi Downloader to upload the firmware to your mobile
(mobile needs to be in download mode, this should still work. Try volume down + home + power)
Just upload the clean firmware and it should be done. The complete guide is placed on the same website on the download page.
OfficialDenzil said:
Had the same, the solution is simple:
Download the newest firmware at samfirmware.com
Use Odin Multi Downloader to upload the firmware to your mobile
(mobile needs to be in download mode, this should still work. Try volume down + home + power)
Just upload the clean firmware and it should be done. The complete guide is placed on the same website on the download page.
Click to expand...
Click to collapse
download mode is not available while is bricked, changing the firmware is NOT an option.
hi
yeah same thing happen to me
even the samsung survice centre is lame they tell me that it will cost me
so i bring ma set back and do that jig method and it works more than charm i install ma new cyanogen mod and it is working greatly .if u want to find jig method type unbricking galaxy s jig.
it also works for my mini
Just a little german ?!
DN41 said:
i hate those people who wanna pay their insurance for their silly things and fails!
i hope, tmobile won't take it back.
let's see..it's really hard to brick a phone though.
had some problems with my further hd2 as well..yeah, you get really annoyed but if you chill out, in 99% of the cases you'll find a solution.
DN41
Click to expand...
Click to collapse
(I don't have this problem, but...)
And I, I hate little brained guys who says f***king silly things like you. You're not just a little german, you're also a big sucker.
I swear you will have a problem with your phone, and no solution. Really I wish you that.
For other people who has this problem, don't worry, your phone is frozen, so they can't diagnose it. Just say you was syncronizing with Kies, and it happend the phone turned off and that's impossible to restart it. They'll just give you a new one or repair it.
HI
try these ways
it works with my galaxy s
Hold down Vol UP+Vol Down+Power, the screen will flash black, continue holding down all 3 buttons, you will see the "phone--!--PC" screen again, continue holding all 3 buttons, the screen will flash black again, release the power button only. This will put you into Download Mode.
If this does not work, open odin. Then connect your usb cable to your phone and computer. While the USB is plugged in and Odin running press and hold volume down + Home + Power. Once the black screen comes (flashes) release the Power Button. It should get into download mode.
Additionally it is possible to get into the Download Mode using a kind of micro-usb connector,
the last thing u can try is the jigs
ilazially said:
HI
try these ways
it works with my galaxy s
Hold down Vol UP+Vol Down+Power, the screen will flash black, continue holding down all 3 buttons, you will see the "phone--!--PC" screen again, continue holding all 3 buttons, the screen will flash black again, release the power button only. This will put you into Download Mode.
If this does not work, open odin. Then connect your usb cable to your phone and computer. While the USB is plugged in and Odin running press and hold volume down + Home + Power. Once the black screen comes (flashes) release the Power Button. It should get into download mode.
Additionally it is possible to get into the Download Mode using a kind of micro-usb connector,
the last thing u can try is the jigs
Click to expand...
Click to collapse
Man that volume up and down doesn't support if you have a completely hard bricked phone .
And the jig does works but why use your penny if xda developed a unbricker wich really works for free
I prefer xda undricker the best
Sent from my GT-S5570 using xda premium
Hello guys.I have a galaxy mini and i tried to root it.Everything went fine.Then i saw that an application "Rom manager" would be helpful for my phone.
So i installed it(like an idiot).
Then i tried to install clockwork mode (smthg like that from rom manager) and boom!Everything went black.
I tried to go into recovery mode,download mode NOTHING.
I tried to a lot of things but nothing is working.
Odin recognises my phone when i use volume up+home+end!But it stucks on setup.Again tried to do it in that way but still nothing.
Last i tried that jig thing.I bought 3x100k ohm resistors and do it like he says(that video from youtube) BUT STILL NOTHING.
I dont know what to do!
I would be gratefull if some1 could give me an advice to make it to turn on!
Tyyy.
This is exactly what happened to me too. Did Service centre repair it for free ? What did you tell them ? Please help. ITs urgent/ Bricked black screen.
sahilg009 said:
so i rooted my phone installed rom manager and flashed something like colckwork rom of hawai mini i switched of my mobile.Today in morning when i tried to tun it on it wont only a black screen no sound no logo no vibration I even tried to remove and insert battery but no luck.I think its a hard brick i got this mobile on 28 feb 2011 and it is still under 1 year warrenty of samsung so can i get a new mobile in place of it or just recover it.(I have the UK system here noot of USA)
can you tell me any way to unbrick it any any one
Click to expand...
Click to collapse
Swanks
Guys trust me ROM manager sux bigtym i tried all the cures bt didnt work. Handed it ova to samsung guys n they replaced my motherboard!
sopree said:
Hello guys.I have a galaxy mini and i tried to root it.Everything went fine.Then i saw that an application "Rom manager" would be helpful for my phone.
So i installed it(like an idiot).
Then i tried to install clockwork mode (smthg like that from rom manager) and boom!Everything went black.
I tried to go into recovery mode,download mode NOTHING.
I tried to a lot of things but nothing is working.
Odin recognises my phone when i use volume up+home+end!But it stucks on setup.Again tried to do it in that way but still nothing.
Last i tried that jig thing.I bought 3x100k ohm resistors and do it like he says(that video from youtube) BUT STILL NOTHING.
I dont know what to do!
I would be gratefull if some1 could give me an advice to make it to turn on!
Tyyy.
Click to expand...
Click to collapse
This!!!
rooted phone!! installed Titanium Backup pro, rom-manager (though i didnt use it).
First i removed yahoofinance.apk thingy... it went black but recovered to charging mode (battery charging screen)... odd i thought.. and (like a idiot) booted up and removed livebackground forest thingy... now!
Pitch black, no state of recovery.
Just thist:
Vol up, home and power button. makes it visible to windows and odin.. KIES failes to connect it...
Its almost like... i got one first warning.. and then samsung decided to **** me!
is it somekind of "security lock"?, its not like i removed the kernel.
EDIT: so.. im messing around... The only thing that one really gets comunication with is the modem circuits, so it looks that way... But then what do i know...
ODIN connects to the same com-port as the samsung modem reports having in device manager!, so i asume this is unit it uses to when transfering the data, flashing.
Other: i get some different behaviors... etc, i would use "volup, home and power" to make it visible in win and then i could just use the power button to get the connection on and off (or rather reset! since i just one time got it to actually stay disconnected).
Now on the other hand i cant use the just the "Vol up" button combo, i have to press both Vol up and down with pwr and home to get it to connect with drivers and show up in ODIN etc..
In some cases u have to have battery unpluged and show it in while holding button combo and sometimes u dont..
I cant make out anything out of this, but maby some of u guys can!?
Rom Manager screwed your phone. Not uninstalling forest wallpaper.
I got my phone hard bricked because of ROM manager. I have given it to the service center. Waiting for them to fix it.
chemicalrage said:
Rom Manager screwed your phone. Not uninstalling forest wallpaper.
I got my phone hard bricked because of ROM manager. I have given it to the service center. Waiting for them to fix it.
Click to expand...
Click to collapse
Is there any other option before we go to the service center??
I mean to fix it alone...
sopree said:
Is there any other option before we go to the service center??
I mean to fix it alone...
Click to expand...
Click to collapse
If the phone is hard bricked (no download mode, no battery charge indicator when power plugged in), you really do not have a choice.
While people claim to be able to use jtag / USB jig (see the only thread started by me in the accesories section of this miniforum), I do not have clear answers in that thread.
genieass said:
If the phone is hard bricked (no download mode, no battery charge indicator when power plugged in), you really do not have a choice.
While people claim to be able to use jtag / USB jig (see the only thread started by me in the accesories section of this miniforum), I do not have clear answers in that thread.
Click to expand...
Click to collapse
That jig thing doesnt work..pfff
Hi all, I think my problem may be a bit different, Here is how I got myself in this problem.
This morning I connected phone with kies and found out that there is a 2.3.3 gingerbread upgrade available (my phone has been rooted). I decided to upgrade, but when phone showed downloading screen, at that time my damn pc crashed. Now I unplug the cable, rebooted the pc and when on to do the same again, Kies found out that there was problem in past upgrade so it asked to do an emergency upgrade stuff, but now there was a different problem on the phone. All my phone screen displays is 3 images
Phone image, a yellow triangle with exclamation (warning?), and pc image, which to me means its not connecting to pc. On pc, phone is never recognized any more.
I tried to get to dnload on phone using Volume(up or low) + Power + Home for so many times but no success, if I keep holding 3 buttons it just keeps flashing those 3 icons on the screen and that't.
Any help will be appreciated.
pull your battery out. Put it back in.
Hold Volume down+Home button, while holding those 2 also hold the power button. Phone starts. Let us know what happens.
Nothing as I mentioned before I have tried so many variations including the one you mentioned still the same, that it keeps on flashing the 3 icons (phone+warning+pc)
Use the "magical key" : http://forum.xda-developers.com/showthread.php?t=819551
I came across that earlier today, however was hoping to find an easy solution.. Seems like JTAGing it is for this one now.,.,.
Thanks
Hold the power button for a good 10 seconds.
Then try forcing download mode. You may have to hold the 3 button combo for a bit, but don't give up. I've had it take up to a minute before.
Vol down+Home+Power
Ok, I know everyone says "I bricked my tab" but just dont do research to see they can hold the power and Vol down buttons and start over.
Well I dont have that luxury.
I putting a new ROM on via Odin and it failed, the dowload screen was still up, so I held the power button down to reboot and start over.
The screen has been black ever since.
No Battery icon when charging
No download mode if I hold the buttons down
No connection to Odin or Heimdall.
No power up nothing just black screen.
Any advise?
Thanks!
Open door, place tab beside it, feel the breeze
Nothing you can do really except JTAG repair or send back to samsung.