Database Develop

[Q] etana kernel (2.6.32) brightness problem

I am using etana kernel 2.6.32 , i ve tried a lot of version since 1 months,
I am satisfied with this kernel, but the only issue for me is the automatic set up of brigthness.
The phone when is in "on automatic brightness" is always flickering expecially when i am in bright ambient.
I ve tried to play with advanced set up of brightess but always the same story.
Do you have any suggestion for this issue?
Ciao

Try the new version , april´s 07 , its 3.0 , and works fine. this issue is fixed

I ve tried the new kernel 3.0 of 15 th april but Still the same issue. Do you have any suggestion or is normal this issue with etana kernel? Thanks
Sent from my Optimus 2X using XDA

avanto77 said:
I ve tried the new kernel 3.0 of 15 th april but Still the same issue. Do you have any suggestion or is normal this issue with etana kernel? Thanks
Sent from my Optimus 2X using XDA
Click to expand...
Click to collapse
I also had this problem sometimes with the kernel 3.0.y Etana, but with the last release I have no problems that I mount on 16 April

Which kernel is best to my phone when I installed [ALPHA] [ROM] [4.1.1] CyanogenMod 1

Which kernel is best to my phone when I installed [ALPHA] [ROM] [4.1.1] CyanogenMod 10 for Samsung Galaxy S. And if I change the kernel do I need to back up or reinstall the rom? And whether my files will be deleted from the device?
Thanks in advance.

This kernel is for you.
To change kernel you have to wipe cache, dalvik-cache and at the end flash ZIP file with kernel.
Your files will not be deleted, if you'll do this right, as I wrote.
If you have many files, do backup.
Greetz

Semaphore kernel was good on CM9. Haven't tried the jellybean version. You don't NEED to change it. Most kernel installers will clear out what needs to be cleared, I don't bother wiping stuff anymore.
Sent from my Nexus 7 using Tapatalk 2

which one ?
Taranis said:
This kernel is for you.
To change kernel you have to wipe cache, dalvik-cache and at the end flash ZIP file with kernel.
Your files will not be deleted, if you'll do this right, as I wrote.
If you have many files, do backup.
Greetz
Click to expand...
Click to collapse
There are two kernel in the list ?
Devil3_1.0.3_jb_i9000_CFS_BLN_CMC_20120724.zip
Devil3_1.0.3_jb_i9000_CFS_BLN_VC_20120724.zip
tnx

ramituning said:
There are two kernel in the list ?
Devil3_1.0.3_jb_i9000_CFS_BLN_CMC_20120724.zip
Devil3_1.0.3_jb_i9000_CFS_BLN_VC_20120724.zip
tnx
Click to expand...
Click to collapse
CMC uses CyanogenMod colours (set using AriesParts)
VC is Voodoo Colours (set using Voodoo sound app)
The only real difference is in the colour. I prefer CMC, but AriesParts is broken on CM10 due to bugs with the tvout binary.
Sent from my GT-I9000 using Tapatalk 2

tnx
Kagadar said:
CMC uses CyanogenMod colours (set using AriesParts)
VC is
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the help installing now.
Hope I will be installing properly .... :fingers-crossed::fingers-crossed::fingers-crossed:

devil kernel is working best with cm10 (for me atleast)

YOMAN18 said:
devil kernel is working best with cm10 (for me atleast)
Click to expand...
Click to collapse
I don't know, I've been using devil kernel for a long time now. I just installed the latest CM10 (726) and 1.04 DK and odd things happened. NS Tools would only be displayed in the horizontal view, lock screen would not unlock, odd lag.

[Q] franco kernal

Hi
I installed franco.kernel updater from the play store and it was successful, and then i chose stable kernel and then nightly but both made the screen a dim blue ( functioning phone but brightness was very low and bluish).. An un install and a reboot and its back to normal.
Anyone have a fix for the dim blue screen or any franco kernel mods ?

I don't think our phone supported by Franco
Sent from my LG-P880 using Tapatalk 2

[Q] Backlight Notifactions dont turn off

I have this weird and interesting bug - the Backlights work properly for instance when using the menus and so on. But when it is supposed to blink (display turned off) it glows permanently. I have tried most settings available to me, ending up disabling the backlights to not drain more battery.
I have flashed various Roms (GIngerbread, MacKay 4.2, CM10.1, AOKP 4.1.2) and no matter how much I flashed and resetted the device, the problem stayed. I tried different kernel (up to Semaphore 2.6.6) as well.

What you could try is to download and install nstools from the market and there inside activate bln on the last site....or with bln pro, which is not free, it should be working too.

rodman01 said:
What you could try is to download and install nstools from the market and there inside activate bln on the last site....or with bln pro, which is not free, it should be working too.
Click to expand...
Click to collapse
Thanks for the response. I tried NSTools with MacKay - no difference.
Buying BLN Pro and Semaphore solved the problem for me. Everything else did not work.

maybe they wontet it so you had to buy it

sofamensch said:
Thanks for the response. I tried NSTools with MacKay - no difference.
Buying BLN Pro and Semaphore solved the problem for me. Everything else did not work.
Click to expand...
Click to collapse
Which Mackay Kernel do you use? Because in stockkernel which is included in the rom, there is no support of BLN. Mackay has for JB separate Kernels, also for BLN:
http://rootaxbox.no-ip.org/kasper_h/kernels/
and here is the kernelthread from Mackkay:
http://forum.xda-developers.com/showthread.php?t=1842324
Edit: with semaphore it sould go....but to administate Sema, its better to use semaphore app (from the market) and not using NStools.

BSOD on custom rom - [Solved]

On stock V30a (rooted.unrooted no difference) i dont have BSOD. I use AIO-toolkit option 4, repartition new bootloader, installed tonysp CM10.2, 10,1 avatar 10,2 , every rom i get BSOD ? what im doing wrong *
SOLVED - Okay, please apply 2nd core auto hot-plug in Kowalski manager. This has helped others.

g3ar said:
On stock V30a (rooted.unrooted no difference) i dont have BSOD. I use AIO-toolkit option 4, repartition new bootloader, installed tonysp CM10.2, 10,1 avatar 10,2 , every rom i get BSOD ? what im doing wrong *
Click to expand...
Click to collapse
You should consider trying Pengus' CM10 ROM. I don't think you can find more stability in custom ROMs than his
You'll love the ROM, just give it a chance
But remember to do a full wipe (wipe system, data, cache and dalvik) before flashing the ROM.
Edit: You'll also find out bluetooth works perfectly fine on his ROM where the more recent ROMs don't have this fully functional.

So theres no fix type what shoud i do ?
Baseband 1035,21_20121130 . Kernel 2.6.39.4

Strange, BSODs should be a thing of the past. In most cases it was the kernel. Are you sure you flash the latest ROM versions with latest Kowalski kernel? Try to flash KK after ROM. If it doesn't help, phrase describe the problem more thoroughly. When is BSOD happening? During call?
Sent from my LG-P990 using xda app-developers app

So on stock v30a i dont have problems at all. I use aio toolkit option 4 .then install THE ROM tonyp. Bsod happens when i apply charger

Okay, please apply 2nd core auto hot-plug in Kowalski manager. This has helped others.
Sent from my LG-P990 using xda app-developers app

Man it looks like you solved my nightmare ! THANKS

Hi there,having similar problems using cm10.2 and all roms ,When phone times out its battery removal time,hot plug enabled but still turning off!Any help would be much appreciated thanks Glenn