the battery of my phone died and i pluged it in to the charger, but the damn phone won't boot up!!
i'm using cm10.1 and all i see is the cyanogenmod boot animation but the device won't start' it's stuck in the bootloop for almost an hour!!!
cwm recovery is accessible
what can i do??
idan_abargel said:
the battery of my phone died and i pluged it in to the charger, but the damn phone won't boot up!!
i'm using cm10.1 and all i see is the cyanogenmod boot animation but the device won't start' it's stuck in the bootloop for almost an hour!!!
cwm recovery is accessible
what can i do??
Click to expand...
Click to collapse
Try to factory reset your device and if this isn't working try to flash the rom again.
YDrOiD2500 said:
Try to factory reset your device and if this isn't working try to flash the rom again.
Click to expand...
Click to collapse
i can't re-install the rom because i do not have it in the sd card and i can't turn on the phone, ergo, i can't copy the rom into sd card
YDrOiD2500 said:
Try to factory reset your device and if this isn't working try to flash the rom again.
Click to expand...
Click to collapse
i did wipe data\factory reset and it works!!
idan_abargel said:
i can't re-install the rom because i do not have it in the sd card and i can't turn on the phone, ergo, i can't copy the rom into sd card
Click to expand...
Click to collapse
take sd out and insert in other phone or sd adapter and paste rom there...return sd in your phone and reinstal rom from cwm.
idan_abargel said:
i can't re-install the rom because i do not have it in the sd card and i can't turn on the phone, ergo, i can't copy the rom into sd card
Click to expand...
Click to collapse
well u can install TWRP recovery it allows u to access ur SD card when in recovery mode. hope this helps ya
librend said:
well u can install TWRP recovery it allows u to access ur SD card when in recovery mode. hope this helps ya
Click to expand...
Click to collapse
yes use TWRP or you can push files to you sd with adb,fastboot,and some other programs ...let me know if you need guide.hope yo solved problem .
Related
hey folks, running miui. msg came up to format sd card. didn't know it wasn't my external but my internal partition. some of my apps aren't working. so i'm going to re install miui after a factory reset. would this wipe have affected anything with android it self? would I need to run odin, flash stock then miui?
xtracrispy69 said:
hey folks, running miui. msg came up to format sd card. didn't know it wasn't my external but my internal partition. some of my apps aren't working. so i'm going to re install miui after a factory reset. would this wipe have affected anything with android it self? would I need to run odin, flash stock then miui?
Click to expand...
Click to collapse
No it shouldn't affect anything other than whatever data/files you had on the internal sd card (music, videos, etc.) If you factory reset and reinstall MIUI you should be fine.
Hope u kept a copy of ur TiBu folder on ur PC and also hope next time u'll post in the correct thread
yes but now I think i bricked. ran odin, its now stuck in an att boot loop. cannot get into download mode as all button combos flash the battery charge screen have no clue what to do
xtracrispy69 said:
yes but now I think i bricked. ran odin, its now stuck in an att boot loop. cannot get into download mode as all button combos flash the battery charge screen have no clue what to do
Click to expand...
Click to collapse
Make or buy a jig
anyone know a place in the toronto area that has them?
so the jig will get me in download mode.
would i then run odin, download rogers stock 2.1 rom and flash that?
Well have you tried getting into the download mode ,through the usb insert?
And if you want the JIG contact adam outler here on XDA he will help you out and at a cheaper price....
Hi!
My LG Optimus 2x can only enter on recovery mode! The problem started when I tried to instal Eagle's Blood rom, and when you turn on, appears the Eagle's Blood logo, follow by the LG logo, alternately... And the smartphone don't start...
I entered on the recovery mode and formated everything (wipped everything too)... So, I don't have the old rom (cyanogen 9) in my sd card anymore... And, I can't connect my LG on my pc for transfer it... (I don't know why it's not having connection with them both)
I tried to use the android sdk windows, adb stuff... And it doesn't worked... I don't know why!
Someone can help me??? Thx!
just flash another rom,put ur sd card to your pc then copy a rom,then fresh install it.. done.. or redownload your eaglesblood rom,may be it's corrupt during download time..
vEget7 said:
just flash another rom,put ur sd card to your pc then copy a rom,then fresh install it.. done.. or redownload your eaglesblood rom,may be it's corrupt during download time..
Click to expand...
Click to collapse
Yeah, but, I don't have the entrance in my computer for the sd card...
Anyway, you gave me the correct solution! Thx brow!
BrunoTrevizo said:
Yeah, but, I don't have the entrance in my computer for the sd card...
Anyway, you gave me the correct solution! Thx brow!
Click to expand...
Click to collapse
If you can't put files externally in your sd card,you can flash an NVFlash ROM like topogigi's rom, or if you want to keep the old bootloader to be able to install a large number of custom roms (the ones not based on stock ics) then flash homero's gb NVFlash ROM.
It doesn't require anything to be present on the phone, just follow instructions
BrunoTrevizo said:
Hi!
My LG Optimus 2x can only enter on recovery mode! The problem started when I tried to instal Eagle's Blood rom, and when you turn on, appears the Eagle's Blood logo, follow by the LG logo, alternately... And the smartphone don't start...
I entered on the recovery mode and formated everything (wipped everything too)... So, I don't have the old rom (cyanogen 9) in my sd card anymore... And, I can't connect my LG on my pc for transfer it... (I don't know why it's not having connection with them both)
I tried to use the android sdk windows, adb stuff... And it doesn't worked... I don't know why!
Someone can help me??? Thx!
Click to expand...
Click to collapse
In CWM there is an option to activate usb mass storage in the mounts and storage menu so you can transfer files even in recovery mode
massimo69 said:
In CWM there is an option to activate usb mass storage in the mounts and storage menu so you can transfer files even in recovery mode
Click to expand...
Click to collapse
Works in CWM5 but not CWM6
rugglez said:
Works in CWM5 but not CWM6
Click to expand...
Click to collapse
it works for me on CWM6
BrunoTrevizo said:
Hi!
My LG Optimus 2x can only enter on recovery mode! The problem started when I tried to instal Eagle's Blood rom, and when you turn on, appears the Eagle's Blood logo, follow by the LG logo, alternately... And the smartphone don't start...
I entered on the recovery mode and formated everything (wipped everything too)... So, I don't have the old rom (cyanogen 9) in my sd card anymore... And, I can't connect my LG on my pc for transfer it... (I don't know why it's not having connection with them both)
I tried to use the android sdk windows, adb stuff... And it doesn't worked... I don't know why!
Someone can help me??? Thx!
Click to expand...
Click to collapse
If you don't have success, try using nvflash to recover to 2.1 or 2.2.
It's pretty quickly.
Note: It'll full wipe your phone.
Thanks everyone!!! Solved! Put sd card in a pen drive!!
Hello Community.
I tried to install cwm.
Then i rebootet and after the LG it is just black.
so i googled and found that you can flash de kdz file.
So i tried i installed th usb driver but when i start my phone in update mode(volume -) my PC(WIndows 8 64 bit) Says a problem occured and reboots after 5 sec.
anyone can help?
Im a noob sorry.
Shut your phone down. Remove your sd card and reboot. Then install cwm as normal. Then turn off and put sd and restart. Dont go to cwm with sd card, it will take too much time. Cwm is slow sometimes.
problem
Subhajitdas298 said:
Shut your phone down. Remove your sd card and reboot. Then install cwm as normal. Then turn off and put sd and restart. Dont go to cwm with sd card, it will take too much time. Cwm is slow sometimes.
Click to expand...
Click to collapse
the problem is I set ti factory default.
tobixdev said:
the problem is I set ti factory default.
Click to expand...
Click to collapse
I don' t get it. Explain.
Re
Subhajitdas298 said:
I don' t get it. Explain.
Click to expand...
Click to collapse
So after i couldnt boot i put out the accu (sry for my english) i pressed power and volume - and wiped cash and set it to factory default.
Hi, i was goig to flash a nem rom, but i formated my sd card and it wiped everything. So now it doesnt boot up the system so i can insert the custom rom again from my pc in to the sd card.
I m searching for hours for a solution for how to flash the system another way but cant find how.
Adb sideload
joniboy said:
Hi, i was goig to flash a nem rom, but i formated my sd card and it wiped everything. So now it doesnt boot up the system so i can insert the custom rom again from my pc in to the sd card.
I m searching for hours for a solution for how to flash the system another way but cant find how.
Click to expand...
Click to collapse
Either learn to push/sideload that will teach you things that are good to know here: http://forum.xda-developers.com/showthread.php?t=2325853
Or do it the easy way that wont learn you anything and use the toolkit to push/sideload here:http://forum.xda-developers.com/showthread.php?t=2364445
Where did you waste your hours searching?
redbull123 said:
Either learn to push/sideload that will teach you things that are good to know here: http://forum.xda-developers.com/showthread.php?t=2325853
Or do it the easy way that wont learn you anything and use the toolkit to push/sideload here:http://forum.xda-developers.com/showthread.php?t=2364445
Where did you waste your hours searching?
Click to expand...
Click to collapse
i really did search and google it a lot...
so.. menwhile i found this post http://forum.xda-developers.com/showthread.php?t=2317986 and used sideload, all went ok, but after 100% my phone just turned off and i cant even boot it to recovery now.
joniboy said:
i really did search and google it a lot...
so.. menwhile i found this post http://forum.xda-developers.com/showthread.php?t=2317986 and used sideload, all went ok, but after 100% my phone just turned off and i cant even boot it to recovery now.
Click to expand...
Click to collapse
What happens when you try to enter recovery through the bootloader? Keep volume down and power buttons held until bootloader appears..
turned off because the battery? what recovery do you have?
redbull123 said:
What happens when you try to enter recovery through the bootloader? Keep volume down and power buttons held until bootloader appears..
Click to expand...
Click to collapse
tried that for a few min and no good, so o downloaded the toolkit and chosed adb recovery and i just flashed the custom rom now... thanks all for the help
Hi,
I tried to install cyanogenmod 12.1 after installing it stopped at TWRP recovery project screen v2.8.6.0. i want to remove this and install the previous version..i'm not able to do factory reset/wipe data cache/dalvik cache when i tried to do it says failed.
Unfortunately i have formatted everything on sd card and external sd card. now it says there is no os installed and no super user.
first of all i want to get out of these and install the old version CM11.0.
Please help me its very irritating can't go back to android.
Thanks,
Giri.
Giri512 said:
Hi,
I tried to install cyanogenmod 12.1 after installing it stopped at TWRP recovery project screen v2.8.6.0. i want to remove this and install the previous version..i'm not able to do factory reset/wipe data cache/dalvik cache when i tried to do it says failed.
Unfortunately i have formatted everything on sd card and external sd card. now it says there is no os installed and no super user.
first of all i want to get out of these and install the old version CM11.0.
Please help me its very irritating can't go back to android.
Thanks,
Giri.
Click to expand...
Click to collapse
Okay. Two possible solutions (i think the last is solve your problem).
1. First download cm11 rom and gapps.
Copy the files over your sd card.
Try install via recovery.
If you lucky, that's worked, but i think the rom is not work properly.
2. The good way is odin and then cm11 with clean install.
Sorry for my bad english
reply
kilroy69 said:
Okay. Two possible solutions (i think the last is solve your problem).
1. First download cm11 rom and gapps.
Copy the files over your sd card.
Try install via recovery.
If you lucky, that's worked, but i think the rom is not work properly.
2. The good way is odin and then cm11 with clean install.
Sorry for my bad english
Click to expand...
Click to collapse
I lost everything..i tried other options while doing that when i boot the device it shows only samsung logo after that it wont do anything..when i connect to usb cable also its not showing..
Now i want to do samsung recovery..How to do that.
Giri512 said:
I lost everything..i tried other options while doing that when i boot the device it shows only samsung logo after that it wont do anything..when i connect to usb cable also its not showing..
Now i want to do samsung recovery..How to do that.
Click to expand...
Click to collapse
If no download mode, then i think that: Usb Jig
singhdharmendra48 said:
bcoz i have a jig and work only download mode not reset binary count
Click to expand...
Click to collapse
or:
need-a-samsung-usb-jig-build-your-own
or:
Samsung i9070 (Galaxy S Advance) - JTAG/RIFF connection unbrick (repair dead boot)
I don't know which the different. Jig or Jtag? Sorry, i was not even need it.
Thanks
kilroy69 said:
If no download mode, then i think that: Usb Jig
or:
need-a-samsung-usb-jig-build-your-own
or:
Samsung i9070 (Galaxy S Advance) - JTAG/RIFF connection unbrick (repair dead boot)
I don't know which the different. Jig or Jtag? Sorry, i was not even need it.
Click to expand...
Click to collapse
Thanks..better to go to service centre..