Hi
I have problem with Topaz. When I save in contact - mobile No with country code (egz. +44) and try to call from other phone my Topaz don’t recognize number and is showing as a number not contact which was saved.
If I save in contact mobile No as 0xxxxxxxx without country code everything works ok it will show. What is wrong? Is there any setup or patch or anything what I can do with that? I’m travelling quite often so I store numbers with country code.
(Sorry for English)
I do not have this problem, but afaik there is an option on how many digits the number is recognized.
Set your caller ID to identify according to greater or lesser number of digits.
Otherwise, it may be that you have duplicate entries. This would also affect Caller ID.
where is the setting to change the number of digits - I appear to only have options for all contacts, no or address book ...........but no digit mask
I'm having the same issue.....
I've tried to manually add a number. With/without all/some prefixes.
Using + and 00.
I've checked to duplicates.
I've emptied by phonebook and SIM.
I got someone to call me. Saved their number from the call.
I've tried, say, +353868033333 and +3530868033333 and 0868033333 and 868033333 and replaced the + with a Zero.
I've set my Caller ID from 12 down to 2 and still nothing.
I do note something interesting.
I had ONE phone number work so far.
And I've yet to discover why.
I've placed a call with HTC and they are aware of the issue for only a week so far it seems but I think this has been an issue even from previous models.
Anyone got any others ideas? I'm going to try the hard reset and allowing it to import one number from the SIM card. And then I'll sync my full phonebook and see. But I'm holding off a few days to see if HTC will wake up and smell the coffee.
starfish_001!!!
starfish_001,
You need to get a Regedit tool, such as "PHM Regedit" and go to....
HKEY_CURRENT_USER \ ControlPanel \ Phone \
There is a key in there called "CallIDMatch".
You will have to change the range from about 12 down to 2 depending on your phone numbers etc. A soft reset is needed after each change to test.
BUT this has not solved my problem yet. It has for some it seems.
- Geoff
geofflyons said:
starfish_001,
You need to get a Regedit tool, such as "PHM Regedit" and go to....
HKEY_CURRENT_USER \ ControlPanel \ Phone \
There is a key in there called "CallIDMatch".
You will have to change the range from about 12 down to 2 depending on your phone numbers etc. A soft reset is needed after each change to test.
BUT this has not solved my problem yet. It has for some it seems.
- Geoff
Click to expand...
Click to collapse
Excellent - I will give this a go
Ummm... there might be some trouble...
Let me try to help...
Normal number should consist of:
+ (international prefix)
xxx (country code)
xxx (area code/provider prefix)
xxx xxxx (phone number)
So let's use some reverse engineering:
- are ALL phone numbers in your country lenght 7 digits?
- is area code always 3 digits?
- how long is your country code?
For example, post #5:
"+353868033333 and +3530868033333 and 0868033333 and 868033333"
phone number: 8033333
area code: 086
country code: 353
Catch 22: you HAVE TO ommit 0 from area code, so it becomes 86 and correct form becomes first one, +353 86 8033333.
So recognition lenght should be: 7 + 2 + 3 = 12. Right? Not always.
Normally, math goes like this: (shortest possible phone number lenght in your country) + (shortest possible area code lenght without zero) + (country code)
In my country, it looks like this: 6 + 1 + 3 = 10
Example: +385 1 999999
But, there could be: +385 51 999999
and: +385 91 999999
If you go from lenght 2 up, you notice that till lenght 8 those 3 numbers are same for caller ID!
Now, try to play that with you country's number format... not to mention USA, where country code is 1!
Sorry if all of this was already obvious...
Bodisson,
Thanks for that expansion of the issue.
I'm going to give it another go.
Unfortunately the phone numbers here in Ireland can be in a range of:
+363 86 8033333 to +353 1 55555 so perhaps the Irish will be stuck with a HTC phone that will only recognise a handful of phone numbers.
I tried the CallerID with 12 and lower already. I might have to go right back to the basics on this one and start with one phone number.
I've read in other threads that people had to do a hard reset, have some numbers on their sim and then allow the wizard to copy those numbers across. You can then add the full set of numbers.
Thanks for your calculations. I'll give it one more shot before I do a hard reset. If only HTC would roll out WM6.5 so I can try that first. I'm a little put off by the manual upgrades.
Regards,
Geoff
I am having this problem after installing a Translation software in my device, where it automatically installed other languages.... i tried un installing it, but the problem persist, i have to hard rest i think !!
Crimson Lock
Version 1.32.
Last update: 10-Feb-2011.
Let me introduce to you my own variant of anti-thief system for PDAs.
Program is written in native C++ and does not require anything like .net framework.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before using this software, its strongly recommended to backup your device including storage card!
Crimson Lock is guard system for your PDA. It enables you to control your device in the case of its stealing or loss. You can send special SMS-commands from the regular cellular phone.
App has many features, that distinguish it from the similar security systems:
Unique features not found in similar apps are marked with asterisk (*)
All screen resolutions are supported (except square qVGA).
Device lock with/without password.
Loud alarm.
Several SIM cards can be specified.
Tracking events: calls/SMS/softreset/GSM-off.
(*) Enhanced protection. Its extremely hard to destroy the program when the protection is enabled!
(*) Customized behaviour on different events.
(*) Support for multi-SIM-cards.
(*) Package export for inserting into ROM.
(*) Export and import of settings.
(*) Create package to autorun from storage card.
(*) Support for PDAs with two slots for SIM cards.
(*) Force enable/disable phone module.
(*) Embedding owner's information (name, address, etc.).
(*) Support for unallowed programs.
(*) Block incoming/outgoing calls and SMS messages.
(*) Temporary configuration, if the main one is not writable.
(*) Forced accept calls from the trusted numbers.
(*) Possibility to test lock/alarm/embedded info.
(*) Block hardware buttons on forced call.
(*) Switch on speakerphone on forced call.
(*) System GPS-driver support as well as internal NMEA reader.
(*) Four formats of coordinates, including URL to Google Maps.
Commands send via SMS enable you with the following capabilities:
Query status (app version/protection/lock/UI presence/license state).
Forced callback/call specified number.
Lock device (with/without password)/unlock.
Clear call log, contacts, SMS messages, tasks, appointments, whole PIM.
Softreset.
Hardreset.
Format storage card.
Query coordinates from the GPS-receiver (single or location mode).
Query info about cellular tower: CellID/LAC/MCC/MNC/BaseStation (single or location mode).
Enable/disable alarm.
Request for list of commonly used commands.
(*) Change unlock key.
(*) Display custom message.
(*) Show embedded information.
(*) Manage list of unallowed programs (add/delete/clear/enable/disable).
(*) Mark current SIM card as "enemy".
(*) Set new alarm number.
(*) Isolation: remove UI and all the tracks from registry/filesystem.
(*) Query HWID (application code) and remote licensing (imagine, that you've lost PDA, but did not license Crimson Lock).
(*) Self-destruct of the program.
Prospects:
Port to Android platform.
Forced battery drain (not sure that is needed).
Sending e-mails.
Edit program settings on the PC.
Handle G-sensor.
-----------------------
Downloads:
English .cab: View attachment CrimsonLock.1.32.en.CAB
List of commands: (PDF HandCard): View attachment en.zip
Also, on the program's site you can get localizations for German, Russian, French, Spanish, Italian, Serbian and Bulgarian.
Twitter: http://twitter.com/PocketImps
Compatibility: WM5+
Home page: www.PocketImps.com
Default unlock key: 0000
You can purchase the license key on our home page.
Only for one month Crimson Lock has special price! The most comprehensive guardian costs its money, does not it?
Discussion of this project in Russian goes on: www.4pda.ru
-----------------------
History of changes:
1.32
[+] Incorrect SMS commands are reported back.
Fixed a bug with a list of predefined applications in some of language translations.
Added waiting cursor while program start.
1.31
[+] Bulgarian language by Krassy Krastev.
Improved GPS locator: fixed an issue which prevented to run locator from cold start on some devices.
[+] Answer for status command contains state of GPS/GSM locator.
[+] Debug option added: ask permission for sending outgoing SMS messages.
1.30
Length for name of trusted phone number has been increased.
Improved phone numbers comparing while dialing.
SMS message now also contains sender`s phone number if available.
Date and time added to outgoing SMS messages.
Commands selfdestruct causes softreset.
Fixed a bug in handling of phone module disabling.
Self-protection greatly improved. Especially against some tools.
Minor visual improvements and fixes.
1.29
Enemy command does not erase a registered SIM-card from the list. It becomes be marked as Enemy.
Fixed a problem with editing of SIM cards and trusted phone numbers.
Small issue with exporting a package for ROM.
Protection module, that was extracted from the autorun package, is unable to run after soft-reset. Fixed.
Fixed an issue that hung Sony Ericsson Xperia X1 and HTC MAX 4G.
While uninstalling its prompted to remove the package from storage card.
Device lock could be avoided. Improved protection.
Fixed incorrect call acceptance on some devices.
1.27
[+] Serbian language by Vladan Tačić AKA psycho063.
[+] Added easter egg!
An autorun package after hard-reset runs after two minutes delay.
GPS settings could be lost in some rare cases. Fixed.
1.26
Some settings could be lost on reboot. Fixed.
Fixed a mistake which could lead to critical failure after import of settings.
TrashKalmar said:
Crimson Lock
Version 1.09a.
Last update: 04-Dec-2009.
Let me introduce to you my own variant of anti-thief system for PDAs. This project will be commercial, but now it needs to be thoroughly tested.
Program is written in native C++ and does not require anything like .net framework.
Before using this software, its strongly recommended to backup your device including storage card!
Crimson Lock is guard system for your PDA. It enables you to control your device in the case of its stealing or loss. You can send special SMS-commands from the regular cellular phone.
App has many features, which distinguishes it from the similar security systems:
Unique features not found in similar apps are marked with asterisk (*)
All screen resolutions are supported (except square qVGA).
Device lock with/without password.
Loud alarm.
Several SIM cards can be specified.
Tracking events: calls/SMS/softreset/GSM-off.
(*) Enhanced protection. Its extremely hard to destroy the program when the protection is enabled!
(*) Customized behaviour on different events.
(*) Force enable/disable phone module.
(*) Embedding owner's information (name, address, etc.).
(*) Support for unallowed programs.
(*) Block incoming/outgoing calls and SMS messages.
(*) Temporary configuration, if the main one is not writable.
(*) Forced accept calls from the trusted numbers.
(*) Possibility to test lock/alarm/embedded info.
(*) Block hardware buttons on forced call.
(*) Switch on speakerphone on forced call.
Commands send via SMS enable you with the following capabilities:
Query status (app version/protection/lock/UI presence/license state).
Forced callback/call specified number.
Lock device (with/without password)/unlock.
Clear call log, contacts, SMS messages, tasks, appointments, whole PIM.
Softreset.
Hardreset.
Format storage card.
Query coordinates from the GPS-receiver (single or location mode).
Query info about cellular tower: CallID/LAC/MCC/MNC/BaseStation (single or location mode).
Enable alarm.
(*) Change unlock key.
(*) Display custom message.
(*) Show embedded information.
(*) Manage list of unallowed programs (add/delete/clear/enable/disable).
(*) Mark current SIM card as "enemy".
(*) Set new alarm number.
(*) Isolation: remove UI and all the tracks from registry/filesystem.
(*) Query HWID (application code) and remote licensing (imagine, that you've lost PDA, but did not license Crimson Lock).
(*) Self-destruct of the program.
Prospects:
Create package for embedding preconfigured Crimson Lock to PDA's firmware.
Forced battery drain (not sure that is needed).
Sending e-mails.
Edit program settings on the PC.
Handle G-sensor.
-----------------------
Compatibility: WM5+
Home page: Does not exist for now
Default unlock key: 0000
-----------------------
Downloads:
English .cab: View attachment 253166
Russian .cab: View attachment 253167
HandCards (en+ru) .pdf: View attachment 253168
All versions write log in device's root folder.
-----------------------
Please pay additional attention on the following:
Is it really extremely hard to destroy the program?
How does GPS work. My PDA has not GPS-receiver so I've no way to test it except the emulator.
Action set for each event. Defaults are exemplarily.
Bugs and mistakes as usual
Discussion of this project in russian goes on: http://4pda.ru/forum/index.php?showtopic=136347
Click to expand...
Click to collapse
this app need to be able to cooked into rom,and able to let the user set the option during flashing the rom.
if not,after a hardreset and this app is just useless
tcchuin said:
this app need to be able to cooked into rom,and able to let the user set the option during flashing the rom.
if not,after a hardreset and this app is just useless
Click to expand...
Click to collapse
I know this, so this expressed in "Prospects". But while the program is still under development/testing process, its not recommended to have flashed buggy program Am I right?
will test out and report back. thank you.
during the install it pop up a message but i could not understand it cause it was in russian i guess, do you mind changing it english
also GPS setup dont work, when i tap it, nothing happens, website to buy license is dead, so i cant test the rest of the features for the time being, will fully test it more later on.
allthatinny said:
during the install it pop up a message but i could not understand it cause it was in russian i guess, do you mind changing it english
Click to expand...
Click to collapse
Oops, sorry, forgot to recompile setup.dll for english language Please try a new version.
allthatinny said:
also GPS setup dont work, when i tap it, nothing happens, website to buy license is dead, so i cant test the rest of the features for the time being, will fully test it more later on.
Click to expand...
Click to collapse
What namely doesn't work? GPS within CrimsonLock or other apps using GPS?
Site will be ready soon, give me your AppID (Menu > License > Application ID), I'll generate a key for you.
TrashKalmar said:
Oops, sorry, forgot to recompile setup.dll for english language Please try a new version.
Give me in PM your AppID (Menu > License > Application ID), I'll generate a key for you.
Click to expand...
Click to collapse
so far it seems to be working as you hope, limited license IS very limited, which includes command that gives a kick back message to sender when it requires license info, certain features within the program that requires a license seems to be locked as you wanted, and u do get the annoying lil message at start that the program is unlicense, lol
TrashKalmar said:
Oops, sorry, forgot to recompile setup.dll for english language Please try a new version.
What namely doesn't work? GPS within CrimsonLock or other apps using GPS?
Site will be ready soon, give me your AppID (Menu > License > Application ID), I'll generate a key for you.
Click to expand...
Click to collapse
wish i could give u my app id, but i used the isolate feature now my icon and the app is gone, lmao i dunno how to get it back, lol i never got instruction on how to get it back, lmfao
allthatinny said:
wish i could give u my app id, but i used the isolate feature now my icon and the app is gone, lmao i dunno how to get it back, lol i never got instruction on how to get it back, lmfao
Click to expand...
Click to collapse
Download updated .cab and install it. Before this send to your PDA SMS with following text: #0000#-protect
This will disable protection, so app will not perform isolation again.
Very nice and useful application!
I'm going to test it.
TrashKalmar said:
Download updated .cab and install it. Before this send to your PDA SMS with following text: #0000#-protect
This will disable protection, so app will not perform isolation again.
Click to expand...
Click to collapse
the -protect didnt seems to work but i will send my app id, i used the hwid to get it, maybe i could register it by using the lic: command, good thing u added such a feature, lol
ok i got the -protect to work but icon is still missing, waiting for the link on the updated ver
allthatinny said:
ok i got the -protect to work but icon is still missing, waiting for the link on the updated ver
Click to expand...
Click to collapse
Icon will appear after you reinstall an application again. Updated link is in thread's header.
allthatinny said:
also GPS setup dont work, when i tap it, nothing happens...
Click to expand...
Click to collapse
OK, I've got. "GPS setup" menu item is disabled for now, because GPS settings are taken from OS's configured GPS-minidriver. Own GPS-parser is under development now.
so far i cant get into the gps setup, advance option stays the same, DONT EVER ADD COMM MANGER to the Control List, it will block you from calling out, u should warn ppl about that or exclude the comm manager .exe from the control list
allthatinny said:
so far i cant get into the gps setup, advance option stays the same, DONT EVER ADD COMM MANGER to the Control List, it will block you from calling out, u should warn ppl about that or exclude the comm manager .exe from the control list
Click to expand...
Click to collapse
GPS Setup is simply disabled, but what about advanced options, what do you mean? You're unable to open advanced options window?
(May be I have bad understanding capabilities, because english is not my native lng )
In my mind, people are free to add everything that they like. They are warned about really critical exe like gwes.exe or filesys.exe. Because closing this apps leads to PDA halt.
the advance option opens, am able to check off and on settings but it does not save, when i apply and quit, then relaunch crimson it reverts back to the default settings.
In my device everything OK, advanced options are saved properly. Try to softreset your device. Are any other options stay the same?
after registering and softreset it works now, but i cant change my pass, when i try change password, it pops up asking me for current password, then goes back to menu upon entering the right code
Hello mates I have collected few secret codes for our HD7,I am going to share with u
so far I have collected few secret codes on this HD 7 like Field Test and some other unknown secret codes. But the Only Confirmed Secret Code is the Field Test Secret Code.
Field Test Code: ##3282#
Other Secret Codes for HTC HD 7 (Try them at your own risk)
*#61# And *#62# and *#67# are all related to call forwarding, if u replace *# with ## u will receive a succeeded message. *#76# and *#77# disables service. Not sure what service. *#21# disables all forwarding capabilities. *#30# service enabled. *#31# and *#33# *#35# service disabled. *#43# service enabled for voice *#331# and *#332# and *#351#service disabled
I am not responspible for any damage to ur device.
Enjoy
Anyone tried ?
yes i'm tryed but i don't understand anyting
thanx anyway...
sachin kundu said:
Hello mates I have collected few secret codes for our HD7,I am going to share with u
so far I have collected few secret codes on this HD 7 like Field Test and some other unknown secret codes. But the Only Confirmed Secret Code is the Field Test Secret Code.
Field Test Code: ##3282#
Other Secret Codes for HTC HD 7 (Try them at your own risk)
*#61# And *#62# and *#67# are all related to call forwarding, if u replace *# with ## u will receive a succeeded message. *#76# and *#77# disables service. Not sure what service. *#21# disables all forwarding capabilities. *#30# service enabled. *#31# and *#33# *#35# service disabled. *#43# service enabled for voice *#331# and *#332# and *#351#service disabled
I am not responspible for any damage to ur device.
Enjoy
Click to expand...
Click to collapse
These are not secret codes for HD7, but only the standard GSM commands/codes always used on any GSM/UMTS terminal.
Look at this links for infos:
GSM Features That Aren't Widely Known
GSM codes to note
GSM Feature Codes
secret codes for HD7
##3282# – Field Test Code
*#06# = Show IMEI