Hi All,
I have an Indian HTC One Dual SIM 802d M7C_DWG.
I'm looking for any RUU for the handset or any custom rom to flash with this model#.
Kindly help ...
Hi All,
Even i am looking for the same. tried to root my phone and now for some reason it keeps booting into the bootloader. i have cwm installed and i can even use it to install a rom. but even after that it keeps booting into the bootloader.
PLEASE HELP !!
The RUU can save me !
Please help!!
I have a HTC One 802d (m7c_dwg) indian dual sim version..
I have messed it up pretty much.
I am new to XDA forum. Maybe I am not able to search well.
However, when my phone was working perfectly fine and stock it was:
version: 0.5
version-bootloader: 2.27.0000
version-baseband: 1.01.32.0917
version-cpld: None
version-microp: None
version-main: 2.23.720.2
version-misc: PVT SHIP S-ON
product: m7cdwg
platform: HBOOT-8064
modelid: PN0751000
cidnum: HTC__038
partition-layout: Generic
security: on
build-mode: SHIP
hbootpreupdate: 11
gencheckpt: 0
After this I have made a terrible mistake.
I went S-OFF and flashed this RUU. The onl;y RUU.exe i could find.
ruu_m7c_dwg_jb_50_htccn_chs_ct_1.12.1401.1_radio_1 237.17.18.0423release_signed
This has changed my hboot, software no., radio everything and i am not able to get any signal on my phone.
After this i upgraded the firmware to
OTA_M7C_DWG_JB_50_S1_HTCCN_CHS_CT_2.40.1401.1-2.36.1401.1_release_339188zxf4sldwhr7k7cw8
MY condition now is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.27.0000
(bootloader) version-baseband: 2.03.30.1025
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.40.1401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT382MP00013
(bootloader) imei: 357607050351635
(bootloader) meid: A1000037A614ED
(bootloader) product: m7cdwg
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0751000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 4120mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-b78ee36f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Still of no help. I am not getting any signal even now. Whenever i try to get back to stock via installing Nandroid backup i created when it was stock. It flashes well.
But as soon as it boots. It reboots after few seconds and keeps rebooting like that.
I dont know now what to do. I have tried flashing soul ROMs, still the same issue.
It boots up but i dont see anything on the screen, just the battery icon and no signal. it again reboots.
PLEASE HELP ME WITH THIS. I DONT KNOW WHAT TO DO NOW.
If you can post HTC One 802d indian official firmware package, it will be of great great help.!
Also, Please tell me how i can get back to S-ON as i will have to visit service center, i suppose.
Please Help!!
(I am sort of a noob, please don't mind if i sound dumb)
THANK YOU FOR YOUR HELP IN ADVANCE.
initeshx said:
I have a HTC One 802d (m7c_dwg) indian dual sim version..
I have messed it up pretty much.
I am new to XDA forum. Maybe I am not able to search well.
However, when my phone was working perfectly fine and stock it was:
version: 0.5
version-bootloader: 2.27.0000
version-baseband: 1.01.32.0917
version-cpld: None
version-microp: None
version-main: 2.23.720.2
version-misc: PVT SHIP S-ON
product: m7cdwg
platform: HBOOT-8064
modelid: PN0751000
cidnum: HTC__038
partition-layout: Generic
security: on
build-mode: SHIP
hbootpreupdate: 11
gencheckpt: 0
After this I have made a terrible mistake.
I went S-OFF and flashed this RUU. The onl;y RUU.exe i could find.
ruu_m7c_dwg_jb_50_htccn_chs_ct_1.12.1401.1_radio_1 237.17.18.0423release_signed
This has changed my hboot, software no., radio everything and i am not able to get any signal on my phone.
After this i upgraded the firmware to
OTA_M7C_DWG_JB_50_S1_HTCCN_CHS_CT_2.40.1401.1-2.36.1401.1_release_339188zxf4sldwhr7k7cw8
MY condition now is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.27.0000
(bootloader) version-baseband: 2.03.30.1025
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.40.1401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT382MP00013
(bootloader) imei: 357607050351635
(bootloader) meid: A1000037A614ED
(bootloader) product: m7cdwg
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0751000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 4120mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-b78ee36f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Still of no help. I am not getting any signal even now. Whenever i try to get back to stock via installing Nandroid backup i created when it was stock. It flashes well.
But as soon as it boots. It reboots after few seconds and keeps rebooting like that.
I dont know now what to do. I have tried flashing soul ROMs, still the same issue.
It boots up but i dont see anything on the screen, just the battery icon and no signal. it again reboots.
PLEASE HELP ME WITH THIS. I DONT KNOW WHAT TO DO NOW.
If you can post HTC One 802d indian official firmware package, it will be of great great help.!
Also, Please tell me how i can get back to S-ON as i will have to visit service center, i suppose.
Please Help!!
(I am sort of a noob, please don't mind if i sound dumb)
THANK YOU FOR YOUR HELP IN ADVANCE.
Click to expand...
Click to collapse
Have a same problem like you
Who can help me or explain to me?
hoangps said:
Have a same problem like you
Who can help me or explain to me?
Click to expand...
Click to collapse
initeshx said:
I have a HTC One 802d (m7c_dwg) indian dual sim version..
I have messed it up pretty much.
I am new to XDA forum. Maybe I am not able to search well.
However, when my phone was working perfectly fine and stock it was:
version: 0.5
version-bootloader: 2.27.0000
version-baseband: 1.01.32.0917
version-cpld: None
version-microp: None
version-main: 2.23.720.2
version-misc: PVT SHIP S-ON
product: m7cdwg
platform: HBOOT-8064
modelid: PN0751000
cidnum: HTC__038
partition-layout: Generic
security: on
build-mode: SHIP
hbootpreupdate: 11
gencheckpt: 0
After this I have made a terrible mistake.
I went S-OFF and flashed this RUU. The onl;y RUU.exe i could find.
ruu_m7c_dwg_jb_50_htccn_chs_ct_1.12.1401.1_radio_1 237.17.18.0423release_signed
This has changed my hboot, software no., radio everything and i am not able to get any signal on my phone.
After this i upgraded the firmware to
OTA_M7C_DWG_JB_50_S1_HTCCN_CHS_CT_2.40.1401.1-2.36.1401.1_release_339188zxf4sldwhr7k7cw8
MY condition now is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.27.0000
(bootloader) version-baseband: 2.03.30.1025
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.40.1401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT382MP00013
(bootloader) imei: 357607050351635
(bootloader) meid: A1000037A614ED
(bootloader) product: m7cdwg
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0751000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 4120mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-b78ee36f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Still of no help. I am not getting any signal even now. Whenever i try to get back to stock via installing Nandroid backup i created when it was stock. It flashes well.
But as soon as it boots. It reboots after few seconds and keeps rebooting like that.
I dont know now what to do. I have tried flashing soul ROMs, still the same issue.
It boots up but i dont see anything on the screen, just the battery icon and no signal. it again reboots.
PLEASE HELP ME WITH THIS. I DONT KNOW WHAT TO DO NOW.
If you can post HTC One 802d indian official firmware package, it will be of great great help.!
Also, Please tell me how i can get back to S-ON as i will have to visit service center, i suppose.
Please Help!!
(I am sort of a noob, please don't mind if i sound dumb)
THANK YOU FOR YOUR HELP IN ADVANCE.
Click to expand...
Click to collapse
tushar_316 said:
Hi All,
Even i am looking for the same. tried to root my phone and now for some reason it keeps booting into the bootloader. i have cwm installed and i can even use it to install a rom. but even after that it keeps booting into the bootloader.
PLEASE HELP !!
The RUU can save me !
Click to expand...
Click to collapse
ravinder0003 said:
Hi All,
I have an Indian HTC One Dual SIM 802d M7C_DWG.
I'm looking for any RUU for the handset or any custom rom to flash with this model#.
Kindly help ...
Click to expand...
Click to collapse
any one could restore his phone ,
anyone knows some one have the same phone so we can extract everything from it
MR.shwetkprabhat show me away to pull radio and system from another device ,
Maybe the phone need to be rooted to do this
connect yout phone with your computer and enter in your console on your computer:
1. adb shell
2. su -
3. cat /proc/emmc
now you see a list of your partitions, it looks similar to this
---------
dev: size erasesize name
mmcblk0p20: 000ffa00 00000200 "misc"
mmcblk0p37: 00fffe00 00000200 "recovery"
mmcblk0p36: 01000000 00000200 "boot"
mmcblk0p38: 93fffc00 00000200 "system"
mmcblk0p27: 00140200 00000200 "local"
mmcblk0p39: 17fffe00 00000200 "cache"
mmcblk0p40: 670000000 00000200 "userdata"
mmcblk0p23: 01400000 00000200 "devlog"
mmcblk0p25: 00040000 00000200 "pdata"
mmcblk0p28: 00010000 00000200 "extra"
mmcblk0p34: 04b00200 00000200 "radio"
mmcblk0p16: 03c00400 00000200 "adsp"
mmcblk0p15: 00100000 00000200 "dsps"
mmcblk0p18: 00500000 00000200 "wcnss"
mmcblk0p17: 007ffa00 00000200 "radio_config"
mmcblk0p21: 00400000 00000200 "modem_st1"
mmcblk0p22: 00400000 00000200 "modem_st2"
mmcblk0p30: 00040000 00000200 "skylink"
mmcblk0p31: 01900000 00000200 "carrier"
mmcblk0p29: 00100000 00000200 "cdma_record"
mmcblk0p19: 01affe00 00000200 "reserve_1"
mmcblk0p33: 034ffa00 00000200 "reserve_2"
mmcblk0p35: 05fffc00 00000200 "reserve_3"
mmcblk0p32: 04729a00 00000200 "reserve"
adb shell su -c "dd if=/dev/block/mmcblk0p37 of=/sdcard/recovery.img bs=4096"
adb shell su -c "dd if=/dev/block/mmcblk0p36 of=/sdcard/boot.img bs=4096"
adb shell su -c "dd if=/dev/block/mmcblk0p38 of=/sdcard/system.img bs=4096"
adb shell su -c "dd if=/dev/block/mmcblk0p34 of=/sdcard/radio.img bs=4096"
adb pull /sdcard/recovery.img
adb pull /sdcard/boot.img
adb pull /sdcard/system.img
adb pull /sdcard/radio.img
Please make sure the same block is used i know that your skills better than min please
i also have a bricked device
htc one dual 802d india bricked
info was
os 2.23.720.2
hboot 2.2700
now after flash with china rom its in boot loop
need ruu or stock rom for india ver cid 38
thanks
htc 802d india 720
is there any one who has this update zip file on memory or some were that can upload it here?
2.37.720.1 (316.38 MB) . is ota update and may be some one copy it from internal storage after download
maybe it help us to make our phone alive
Check this post: http://forum.xda-developers.com/showthread.php?t=2495697
J_M_V_S said:
Check this post: http://forum.xda-developers.com/showthread.php?t=2495697
Click to expand...
Click to collapse
i checked it be fore and i couldn't find that
hadi207 said:
i checked it be fore and i couldn't find that
Click to expand...
Click to collapse
Please check again, as there's a CWM backup of the version you're looking for.
J_M_V_S said:
Please check again, as there's a CWM backup of the version you're looking for.
Click to expand...
Click to collapse
i already downloaded that. but i need ota update 2.37.720.1 (316.38 MB) not cwm back up
hadi207 said:
i already downloaded that. but i need ota update 2.37.720.1 (316.38 MB) not cwm back up
Click to expand...
Click to collapse
Why do you specifically need OTA Update? As far as I can tell the CWM backup would do just the same...you can strip what you don't need from the Nandroid.
J_M_V_S said:
Why do you specifically need OTA Update? As far as I can tell the CWM backup would do just the same...you can strip what you don't need from the Nandroid.
Click to expand...
Click to collapse
i need OTA update because it contains adsp radio sbl qsc_radio.and cwm backup contains only boot recovery system .
thast s why i need OTA
hadi207 said:
i need OTA update because it contains adsp radio sbl qsc_radio.and cwm backup contains only boot recovery system .
thast s why i need OTA
Click to expand...
Click to collapse
Did you tried latest 802w radio extracted from 2.41 Rusia? >> http://forum.xda-developers.com/showpost.php?p=49939788&postcount=172
J_M_V_S said:
Did you tried latest 802w radio extracted from 2.41 Rusia? >> http://forum.xda-developers.com/showpost.php?p=49939788&postcount=172
Click to expand...
Click to collapse
yes and same situation .base band unknown and imei 000000000000 and phone keep restarting
hadi207 said:
yes and same situation .base band unknown and imei 000000000000 and phone keep restarting
Click to expand...
Click to collapse
Have you tried downloading again? Sometimes a bad download can do that. Also, did you tried other radios (even for a different model)?
check this bro,, may be it will help tou http://forum.xda-developers.com/showthread.php?t=2617159&nocache=1
there is no stock ruu for htc 802d dual sim indian model
modelid: PN0751000
cidnum: HTC__038
if anyone hv link for full stock ruu.exe pls upload
Related
I have a HTC One 802d (m7c_dwg) indian dual sim version..
I have messed it up pretty much.
I am new to XDA forum. Maybe I am not able to search well.
However, when my phone was working perfectly fine and stock it was:
version: 0.5
version-bootloader: 2.27.0000
version-baseband: 1.01.32.0917
version-cpld: None
version-microp: None
version-main: 2.23.720.2
version-misc: PVT SHIP S-ON
product: m7cdwg
platform: HBOOT-8064
modelid: PN0751000
cidnum: HTC__038
partition-layout: Generic
security: on
build-mode: SHIP
hbootpreupdate: 11
gencheckpt: 0
After this I have made a terrible mistake.
I went S-OFF and flashed this RUU. The onl;y RUU.exe i could find.
ruu_m7c_dwg_jb_50_htccn_chs_ct_1.12.1401.1_radio_1237.17.18.0423release_signed
This has changed my hboot, software no., radio everything and i am not able to get any signal on my phone.
After this i upgraded the firmware to
OTA_M7C_DWG_JB_50_S1_HTCCN_CHS_CT_2.40.1401.1-2.36.1401.1_release_339188zxf4sldwhr7k7cw8
MY condition now is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.27.0000
(bootloader) version-baseband: 2.03.30.1025
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.40.1401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT382MP00013
(bootloader) imei: 357607050351635
(bootloader) meid: A1000037A614ED
(bootloader) product: m7cdwg
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0751000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 4120mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-b78ee36f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Still of no help. I am not getting any signal even now. Whenever i try to get back to stock via installing Nandroid backup i created when it was stock. It flashes well.
But as soon as it boots. It reboots after few seconds and keeps rebooting like that.:crying:
I dont know now what to do. I have tried flashing soul ROMs, still the same issue.
It boots up but i dont see anything on the screen, just the battery icon and no signal. it again reboots.
PLEASE HELP ME WITH THIS. I DONT KNOW WHAT TO DO NOW.
If you can post HTC One 802d indian official firmware package, it will be of great great help.!
Also, Please tell me how i can get back to S-ON as i will have to visit service center, i suppose.
Please Help!!
(I am sort of a noob, please don't mind if i sound dumb)
THANK YOU FOR YOUR HELP IN ADVANCE.
i had same problem,
my device keep bootloop after reintsalling stock..
my device HTC one 802D ( indonesia/wwe ) i think the RUU same with indian HTC One DS 802d
anyone can share the RUU ?? please :crying:
dj_rizkycore said:
i had same problem,
my device keep bootloop after reintsalling stock..
my device HTC one 802D ( indonesia/wwe ) i think the RUU same with indian HTC One DS 802d
anyone can share the RUU ?? please :crying:
Click to expand...
Click to collapse
There seems to no RUU for us brother..!
I have searched everywhere. All that is available is Chinese and European RUU only.
Only way left now is to hand it over to HTC Repair.
Please post the stock nandroid back if anyone has. Here is extra info.
version: 0.5
version-bootloader: 2.27.0000
version-baseband: 1.01.32.0917
version-cpld: None
version-microp: None
version-main: 2.23.720.2
version-misc: PVT SHIP S-ON
product: m7cdwg
platform: HBOOT-8064
modelid: PN0751000
cidnum: HTC__038
partition-layout: Generic
security: on
build-mode: SHIP
hbootpreupdate: 11
gencheckpt: 0
initeshx said:
There seems to no RUU for us brother..!
I have searched everywhere. All that is available is Chinese and European RUU only.
Only way left now is to hand it over to HTC Repair.
Please post the stock nandroid back if anyone has. Here is extra info.
version: 0.5
version-bootloader: 2.27.0000
version-baseband: 1.01.32.0917
version-cpld: None
version-microp: None
version-main: 2.23.720.2
version-misc: PVT SHIP S-ON
product: m7cdwg
platform: HBOOT-8064
modelid: PN0751000
cidnum: HTC__038
partition-layout: Generic
security: on
build-mode: SHIP
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
Make S-OFF with rumrunner, make super CID, Install stock Chinese ROM, then you can flash SoulROM it is okay to use with any operator.
suzdalenko said:
Make S-OFF with rumrunner, make super CID, Install stock Chinese ROM, then you can flash SoulROM it is okay to use with any operator.
Click to expand...
Click to collapse
+1 on that
suzdalenko said:
Make S-OFF with rumrunner, make super CID, Install stock Chinese ROM, then you can flash SoulROM it is okay to use with any operator.
Click to expand...
Click to collapse
criszz said:
+1 on that
Click to expand...
Click to collapse
I am already s-off and have done what you have suggested here already. Doesn't work..!!
My condition now is when i restore my stock nandroid backup and reboot the phone. I get the welcome and setup screen. (Radio is gone, so no signal whatsoever)
After i finish setup and get to the homescreen. It doesn't load. I have to tap settings and when i press home back, i see all the icons and everything as it was. The phone stays like that for few seconds and then reboots.
After it reboots, only battery, clock and cellular signals icon are visible and it stays like that for few seconds and reboots again.
Any idea whats going on??
What exactly doesn't work with suggested scheme? Does the phone boot after installing original chinese ROM?
initeshx said:
I am already s-off and have done what you have suggested here already. Doesn't work..!!
My condition now is when i restore my stock nandroid backup and reboot the phone. I get the welcome and setup screen. (Radio is gone, so no signal whatsoever)
After i finish setup and get to the homescreen. It doesn't load. I have to tap settings and when i press home back, i see all the icons and everything as it was. The phone stays like that for few seconds and then reboots.
After it reboots, only battery, clock and cellular signals icon are visible and it stays like that for few seconds and reboots again.
Any idea whats going on??
Click to expand...
Click to collapse
Hello, did you find any resolution yet? I am also stuck with the same issue. :crying:
ive unlocked bootloader and philz touch recovery installed
tried to costum rom my htc one and for no reason idk how i formated internal momory and lost rom.zim
for a week now im trying everything
tried sideload , adb push method none of them did work
i got OTG usb cable and i managed to flash somehow a rom . everything goes fine no error during isntalation but device wont start to OS
otg method for my only works on philz touch ?? in other recovery when aroma installer statrs "touch screen" stops responding ...
any help is appreciated
im s-on also my cid is ;; VODAP110
if someone can post a link of RUU that is compatibility of my cid so i can back to stock
You know the first step of troubleshooting?
OUTLINE ALL OF YOUR STEPS WITH DETAILS. Including output of fastboot getvar all (minus IMEI)
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT36GW9A0467
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP110
(bootloader) battery-status: good
(bootloader) battery-voltage: 4015mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ea0bccbd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
lummujaj said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT36GW9A0467
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP110
(bootloader) battery-status: good
(bootloader) battery-voltage: 4015mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ea0bccbd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
OK. And the errors? Exactly? ROM names, Recovery version..come on you need help but not willing to help me help you..
Personally I would flash twrp 2.6.3.3 recovery and start again
Sent from my Nexus 7 using XDA Premium 4 mobile app
lummujaj said:
tried sideload , adb push method none of them did work
Click to expand...
Click to collapse
Why? What was the error?
lummujaj said:
i got OTG usb cable and i managed to flash somehow a rom . everything goes fine no error during isntalation but device wont start to OS
Click to expand...
Click to collapse
What rom and version # ?
im s-on also my cid is ;; VODAP110
if someone can post a link of RUU that is compatibility of my cid so i can back to stock
Click to expand...
Click to collapse
There is no RUU for vodap110
---------- Post added at 11:40 PM ---------- Previous post was at 11:39 PM ----------
nateboi81 said:
Personally I would flash twrp 2.6.3.3 recovery and start again
Click to expand...
Click to collapse
+1
and also check that you have latest ADB version if you want to use sideload (1.0.31)
and check your drivers are correctly installed
I have a Vodafone backup that you can use, however you will have to wait till I get back from work now before I can upload it.
Its android 4.4.2 with the related firmware 4.19.161.1
You will need to flash the recovery I supply and create a couple of TWRP folders on your internal storage for it to work where you will place the backup in order for TWRP to see it, you will need the serial number of your phone too as one of the folders is named your serial number.
Also included is the matching firmware for it, I will not be held responsible for bricks if a flash goes wrong etc though, you update this completely at your own risk.
I'll PM you the link later if you want it.
it supports the following models:
modelid: PN0710000
cidnum: VODAP001
cidnum: VODAP102
cidnum: VODAPE17
cidnum: VODAP405
cidnum: VODAP304
cidnum: VODAPD18
cidnum: VODAP120
cidnum: VODAP110
why there is no HSDPA mode for Radio Mode connection
HELP- HELP PLEASE I NEED HELP
I'am a beginner user, i installed few days ago REVOLUTION HD 93.0
I want to connect with 3G++ HSPDA mode but i don't see it in setting radio mode
I dont know how to do ...
This is below the actual phone parameters
this is a HTC ONE M7 U EUROPE
The provider is TUNTEL from Tunisia
Many thanks to whom can help me
c:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.401.151
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4033mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.084s
c:\fastboot>
kamelzouari said:
why there is no HSDPA mode for Radio Mode connection
HELP- HELP PLEASE I NEED HELP
I'am a beginner user, i installed few days ago REVOLUTION HD 93.0
I want to connect with 3G++ HSPDA mode but i don't see it in setting radio mode
I dont know how to do ...
This is below the actual phone parameters
this is a HTC ONE M7 U EUROPE
The provider is TUNTEL from Tunisia
Many thanks to whom can help me
c:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.401.151
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4033mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.084s
c:\fastboot>
Click to expand...
Click to collapse
HSDPA is esentialy 3g. If you have H in notification bar, that should be it. Measure your internet speed and see what results you get
dey tuuk ur juurbs
donkeykong1 said:
HSDPA is esentialy 3g. If you have H in notification bar, that should be it. Measure your internet speed and see what results you get
dey tuuk ur juurbs
Click to expand...
Click to collapse
thank you for your response.
when i tested speed before installing revolution hd ROM, i dad 16MO down with H signal HSDPA without LTE.
Now, after installation the ROM, I have GSM-WCDMA-LTE with H signal but only 2MO down all time.
I think that HSDPA and HSDPA+ is for 3G++ mode , but the RADIO is not well configurated in revolution HD ROM or some thing like that. I dont know really how update the radio to get the maximum speed rate.
best regards
kamelzouari said:
thank you for your response.
when i tested speed before installing revolution hd ROM, i dad 16MO down with H signal HSDPA without LTE.
Now, after installation the ROM, I have GSM-WCDMA-LTE with H signal but only 2MO down all time.
I think that HSDPA and HSDPA+ is for 3G++ mode , but the RADIO is not well configurated in revolution HD ROM or some thing like that. I dont know really how update the radio to get the maximum speed rate.
best regards
Click to expand...
Click to collapse
Your problem is not with ARHD, you simply have a different phone. ARHD is made for UL version of M7, so radio is a bit different to allow 4g speeds. Sure, it will work with your phone too, but, as you already know, there will be some issues. Like you say - you have 4g (lte) option, but your radio simply doesn't support that kind of connection. I don't have any idea on how to increase your speed, except flashing a stock ROM for your phone, sorry
dey tuuk ur juurbs
donkeykong1 said:
Your problem is not with ARHD, you simply have a different phone. ARHD is made for UL version of M7, so radio is a bit different to allow 4g speeds. Sure, it will work with your phone too, but, as you already know, there will be some issues. Like you say - you have 4g (lte) option, but your radio simply doesn't support that kind of connection. I don't have any idea on how to increase your speed, except flashing a stock ROM for your phone, sorry
dey tuuk ur juurbs
Click to expand...
Click to collapse
thank you for your response.
effectively, my phone is U version radio.
what exactly the stok ROM file should I use, and where can I find it for downloading.
Best Regards;
Hi there
i'm a noob and my HTC ONE M7 is kinda confusing me.. Help??
i have some confusion about what carrier is my HTC M7, i have come across multiple carriers name when i was reading on the internet like HTC Verizon, HTC Sprint, HTC international version etc.
when i press and hold power and - volume, i get these information.
*** UNLOCKED ********
M7_UL PVT SHIP S-OFF RH
Question one. what is my HTC ONE M7 Carrier??
are there any way to know it that i should use??
someone have installed for me TWRP 3.0.2-0 recovery.
but when i tried to check for system update in settings, phone tell me that there's an update and start to download it, but when i install it, here comes up with error stating that:
"Updater process ended with ERROR: 7"
is there someone who have any idea, why this is happening??, does this issue have anything to do with the TWRP recovery?
plus, when i try to check the file that system update have download for me to update, i found in it's name the name Sprint (OTA_M7_WL_K44_SENSE60_SPCS_MR_Sprint_WWE_5.05.651.2-5.03.651.3_realese_393199.zip). does it mean that i'm using HTC sprint version??
please help! i just want to use Stock Roms, because when i tried to use other roms like Viper one, it didn't went well, sometimes my phone just dropped the calls, or turning off internet unexpectedly
gur79tub said:
Hi there
i'm a noob and my HTC ONE M7 is kinda confusing me.. Help??
i have some confusion about what carrier is my HTC M7, i have come across multiple carriers name when i was reading on the internet like HTC Verizon, HTC Sprint, HTC international version etc.
when i press and hold power and - volume, i get these information.
*** UNLOCKED ********
M7_UL PVT SHIP S-OFF RH
Question one. what is my HTC ONE M7 Carrier??
are there any way to know it that i should use??
someone have installed for me TWRP 3.0.2-0 recovery.
but when i tried to check for system update in settings, phone tell me that there's an update and start to download it, but when i install it, here comes up with error stating that:
"Updater process ended with ERROR: 7"
is there someone who have any idea, why this is happening??, does this issue have anything to do with the TWRP recovery?
plus, when i try to check the file that system update have download for me to update, i found in it's name the name Sprint (OTA_M7_WL_K44_SENSE60_SPCS_MR_Sprint_WWE_5.05.651.2-5.03.651.3_realese_393199.zip). does it mean that i'm using HTC sprint version??
please help! i just want to use Stock Roms, because when i tried to use other roms like Viper one, it didn't went well, sometimes my phone just dropped the calls, or turning off internet unexpectedly
Click to expand...
Click to collapse
please post your output of "fastboot getvar all".
alray said:
please post your output of "fastboot getvar all".
Click to expand...
Click to collapse
Here's the "fastboot getvar all"
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 2.03.30.0109
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.05.651.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FAXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXX
(bootloader) meid: XXXXXXXXXXX
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3723mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
gur79tub said:
Here's the "fastboot getvar all"
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 2.03.30.0109
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.05.651.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FAXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXX
(bootloader) meid: XXXXXXXXXXX
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3723mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Your phone is running the Sprint firmware and the MID is also Sprint (M7WLS not M7_UL). Was the "meid" only 0 or there was a real meid before you edited out with "X"
alray said:
Your phone is running the Sprint firmware and the MID is also Sprint (M7WLS not M7_UL). Was the "meid" only 0 or there was a real meid before you edited out with "X"
Click to expand...
Click to collapse
thanks man
but how do u get that it is M/WLS not M7_UL??
the meid is not zeros.. it's 9000XXXXXXXXX
plus what deference between MID and Firmware ?
gur79tub said:
thanks man
but how do u get that it is M/WLS not M7_UL??
Click to expand...
Click to collapse
The M7_UL can not have a MEID, it's always 0
Your MID is Sprint (PN0720000)
Your firmware (version-main) is the Sprint version
And i'm pretty sure that if you look at your partition table, you'll see that your phone is partitioned like a sprint variant
Code:
adb shell
cat /proc/emmc
M7_UL partition table https://forum.xda-developers.com/showpost.php?p=42403239&postcount=1
M7WLS partition table https://forum.xda-developers.com/showpost.php?p=40326225&postcount=1
(look at /system for example) p35 vs p37
If you bought this phone online and told it was an international/gsm phone you were scammed, its a sprint cdma variant.
To install ota update your phone must be 100% stock (stock recovery, 100% untouched /system partition). You can't install ota update with a custom recovery. Also the M7WLS variant will only work correctly when compatible custom recovery/rom/kernel are installed, Recovery/rom/kernel for the m7_ul will not work on your phone.
You can update the to latest sprint version using the ruu on htc's website or you can flash a sprint compatible custom rom using a sprint compatible twrp.
I bought an HTC one m7 a few years back in india. So i was searching for the stock rom.I found an ruu on htc website but the website region was for US ? Can i install that ruu in my indian version phone? In htc india website ,they have not provided any link for any HTC roms for any phone.HTC has provided ruu's only for the US region.
Also searching for the stock rom on other websites ,i found a ruu for asia version? Now can i install this ruu on my phone or do i have to search for india ruu ? What i mean is that is the asian version ruu valid for all asian htc phones or do i have to search for an ruu for my specific country?
I would really appreciate it if anyone would answer all my questions as i am confused a lot and i really need help in this matter.
First, run the 'fastboot getvar all' command. You will see what squeaks in the grass
Gumka1977 said:
First, run the 'fastboot getvar all' command. You will see what squeaks in the grass
Click to expand...
Click to collapse
I have cid .720.xx. it is of India region
I just need help regarding the above matter
first time you should check your device is international , Sprint or , verizion or AT&T version then you can choose your rom.
my device 's international so I can use Asian & EUro
crownvn said:
first time you should check your device is international , Sprint or , verizion or AT&T version then you can choose your rom.
my device 's international so I can use Asian & EUro
Click to expand...
Click to collapse
How to check if my device is international or not?is it mentioned in fastboot?
$urajM said:
How to check if my device is international or not?is it mentioned in fastboot?
Click to expand...
Click to collapse
Read my post and give us the answer to the command (copy - paste). We'll tell you what's next.
$urajM said:
How to check if my device is international or not?is it mentioned in fastboot?
Click to expand...
Click to collapse
run the 'fastboot getvar all' command. it also show full info.
can you also find info on back side of device , such as my devise is PN07110 ( International) or info after run 'fastboot getvar all' command :
Modelid : PN0711000
Cidnum: HTC_044
then you can check attachment .
https://www.upsieutoc.com/image/info-m7.G8pGlC
Gumka1977 said:
Read my post and give us the answer to the command (copy - paste). We'll tell you what's next.
Click to expand...
Click to collapse
Sorry for the late reply. here as the command result-
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA3**^%$#^904
(bootloader) imei: 354435$#%^**^@
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 4090mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Please help me find my stock ruu
crownvn said:
run the 'fastboot getvar all' command. it also show full info.
can you also find info on back side of device , such as my devise is PN07110 ( International) or info after run 'fastboot getvar all' command :
Modelid : PN0711000
Cidnum: HTC_044
then you can check attachment .
https://www.upsieutoc.com/image/info-m7.G8pGlC
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA#$%&*&^$904
(bootloader) imei: 354435*&^@#
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 4093mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Can you give me info about my device? Is it international ? Also I would appreciate if you could provide links for the .ruu file for my phone.
PS- Sorry for the late reply.
$urajM said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA#$%&*&^$904
(bootloader) imei: 354435*&^@#
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 4093mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Can you give me info about my device? Is it international ? Also I would appreciate if you could provide links for the .ruu file for my phone.
PS- Sorry for the late reply.
Click to expand...
Click to collapse
You should not create 2 threads for the same purpose as explained in forum rule #5 https://forum.xda-developers.com/announcement.php?a=81 Just saying because it's easier for everyone (the person requesting help and members) if the discussion take place in a single thread.
https://forum.xda-developers.com/htc-one/general/flashing-stock-rom-t3877100
The M7_u is similar to the international variant M7_ul, the difference is the M7_u lacking LTE radio
Your phone is S-ON (you said it was S-OFF in your other thread.
Link for the RUU in your Q&A thread.
You should request this thread to be removed or moved to the Q&A section, questions should not be posted in the Dev section (see sticky thread)
alray said:
You should not create 2 threads for the same purpose as explained in forum rule #5 https://forum.xda-developers.com/announcement.php?a=81 Just saying because it's easier for everyone (the person requesting help and members) if the discussion take place in a single thread.
https://forum.xda-developers.com/htc-one/general/flashing-stock-rom-t3877100
The M7_u is similar to the international variant M7_ul, the difference is the M7_u lacking LTE radio
Your phone is S-ON (you said it was S-OFF in your other thread.
Link for the RUU in your Q&A thread.
You should request this thread to be removed or moved to the Q&A section, questions should not be posted in the Dev section (see sticky thread)
Click to expand...
Click to collapse
I am so sorry. What I meant so ask was for someone to explain me my phone variant and version along with my fastboot getvar all command..I will correct my question in my next post.
I have uploaded my "fastboot getvar all" results in page-1. Can someone now tell me about my phone variant and version so that next time I flush my rom I have an idea of the ruu file name (like "wwe', "l50","mr").In other words what do words like this mean?
$urajM said:
How to check if my device is international or not?is it mentioned in fastboot?
Click to expand...
Click to collapse
$urajM said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA#$%&*&^$904
(bootloader) imei: 354435*&^@#
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 4093mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Can you give me info about my device? Is it international ? Also I would appreciate if you could provide links for the .ruu file for my phone.
PS- Sorry for the late reply.
Click to expand...
Click to collapse
your device is same mine. now I am running this rom. it is very smoothly
https://forum.xda-developers.com/showthread.php?t=2183023
if u want .RUU pls read and follow this post
https://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
remember to follow U or UL serial
my device used to run this RUU then upgrade sep by step to sense 6 (7.21.707.151 latest)
7.21.707.105
hTC_Asia_WWE
MID: PN0711000
CID: HTC__038
Link md5: 8b0af326b26a6732fd8a60cb476adaf5
if u want to run 7.1. you can try this . it also smoothly however drain battery faster than 5.0 .2 sense 6
https://forum.xda-developers.com/htc-one/orig-development/rom-xenonhd-5-0-2-beta1-27-12-14-t2986038
hope that it help you :highfive:
crownvn said:
your device is same mine. now I am running this rom. it is very smoothly
https://forum.xda-developers.com/showthread.php?t=2183023
if u want .RUU pls read and follow this post
https://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
remember to follow U or UL serial
my device used to run this RUU then upgrade sep by step to sense 6 (7.21.707.151 latest)
7.21.707.105
hTC_Asia_WWE
MID: PN0711000
CID: HTC__038
Link md5: 8b0af326b26a6732fd8a60cb476adaf5
if u want to run 7.1. you can try this . it also smoothly however drain battery faster than 5.0 .2 sense 6
https://forum.xda-developers.com/htc-one/orig-development/rom-xenonhd-5-0-2-beta1-27-12-14-t2986038
hope that it help you :highfive:
Click to expand...
Click to collapse
Thanks a lot. By the way do you happen to know any KitKat custom ROM links that still work for this phone? (4.4.2 or 4.4.3,4.4.4)
I used to run
https://forum.xda-developers.com/htc-one/development/rom-4-4-3-sense-6-6-09-401-5-100-stock-t2854300
https://forum.xda-developers.com/showthread.php?t=2788150
HD rom
all of them is stable
$urajM said:
Thanks a lot. By the way do you happen to know any KitKat custom ROM links that still work for this phone? (4.4.2 or 4.4.3,4.4.4)
Click to expand...
Click to collapse
FYI
4.4.3 RUU that I ran last some year
https://drive.google.com/file/d/1pIDx_F1fG3OyDcO76likozVaLJuS7jM8/view?usp=sharing
crownvn said:
FYI
4.4.3 RUU that I ran last some year
https://drive.google.com/file/d/1pIDx_F1fG3OyDcO76likozVaLJuS7jM8/view?usp=sharing
Click to expand...
Click to collapse
I downloaded a ruu (5.0.2) .Here is the link.This is the only ruu i can run as my device is s-on now.But when i try to flash it using adb i get an error.i tried to extract it and wnrar said the archive is corrupt.I downloaded it again and got the same result.Is there any other ruu i can flash(see from my fastboot getvar all results) or am i adoing something wrong? i have all drivers correctly installed.I checked it and i am sure i am tying the commands correctly.
The eroor is -
error:write_sparse_skip_chunk
and after sometime the bootloader signature check also fails.(I locked my bootloader before flashing)
You need htc_fastboot.exe to correctly flash! Read on the forum. Together with the 'collection of firmware' there is a description.
Gumka1977 said:
You need htc_fastboot.exe to correctly flash! Read on the forum. Together with the 'collection of firmware' there is a description.
Click to expand...
Click to collapse
Thanks alot man.It worked .I was downloading the file again and again as i thought it was corrupt.LOL
So i flashed my stock ruu.When i opened the recovery after that ,it showed a phone icon with arrows and then rebooted into system and factory reset my phone .So do i have to flash my stock recovery before flashing the ruu? I thought the ruu would contain all files for all the partitions? Please help!!!