I saw the specs for kitkat and it looks like it can be run on Nexus One without possibily the use of blackrose?
I still have my nexus one sitting in the box in my closet when I retired it for Nexus 4. I'd *love* to use the nexus one again running kitkat w/o having to flash blackrose!
Texasisnice? anybody can chime in??:good:
CHEERS!!!
I am using ROM [4.2.2] [April 07 2013] VJ CM10.1 | Jelly Bean 4.2.2, i think very good to using kitkat, can anyone creat room cook 4.4 on nexus one. It will very nice and good experience. Can anyone creat kitkat on nexus one? Plz
Sorry for my bad english.
its already happening...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
circle Andrew Sutherland on G+ https://plus.google.com/u/0/b/110748421773388678236/102710594547223731659/posts
Very nice
Can you give me links I want to try it. HI :laugh::laugh::laugh:
the1dynasty said:
its already happening...
circle Andrew Sutherland on G+ https://plus.google.com/u/0/b/110748421773388678236/102710594547223731659/posts
Click to expand...
Click to collapse
Whoa.
That's awesome! :good: but... does it require blackrose? :laugh:
kick ass.
Keep up the great work guys!
When we can download it ?
that's not my post... circle that guy for details... i don't even have this phone lol... i did read that even the one in the screenshot wasn't really usable but at least he got it booted and up to that screen
Andrew is an amazing man!! He runs the last version of Android in our Nexus One after a few hours of its presentation. I hope to see new Android 4.4 ROMs based on the Andrew's work soon.
rafcano said:
Andrew is an amazing man!! He runs the last version of Android in our Nexus One after a few hours of its presentation. I hope to see new Android 4.4 ROMs based on the Andrew's work soon.
Click to expand...
Click to collapse
Would be great! They did say that it is optimized to be able to run on lower RAM devices...
There´s already a post on nexus one dev its pretty bugged but at least it boots...
http://forum.xda-developers.com/showthread.php?t=2540366
Sent from my Nexus One
I've a Nexus One and I'd installed the Evervolv 4.4 KitKat (ev_passion_4.0.0p4.2-perdo-squished) from the Evervolv page (i.e. http://evervolv.com/devices/passion). I'm annoying, this is the smoothest version that I tested in my Nexus One.
I'm running this version with a2sd xdata option in a 16 GB (class 6) SD card, and using a 330 MB system partition. I've installed the most of the GApps (standard, emoji, calendar and browser sync) and the Email add-on offered by TexasIce (in the main thread: http://forum.xda-developers.com/showthread.php?t=2540366). I've installed the patch to solve the Wi-Fi tethering that is in one post of the main thread, and it works!
Then, only one thing is not functional: camcorder. But it's solved with VideocamIllusion (worse quality, but works).
Evervolv 4.4.2 is really very smooth.
I am using the latest nightly (2013-12-14) with 250 MB system and mounts2sd in class 10 sd card.
Internal partition is being used for dalvik cache and system apps.
The only problem for me is the lack of tun.ko.
Kernel is not built to support tunnel interface thus cannot use openvpn.
the only thing i am missing is a working video recording, its all delayed :/
Stock Nexus One > Update to KitKat
Hi All,
A little behind the times but over the holidays i unfortunately smashed my Moto G to pieces and need to make it through to payday at the end of January. So, looking through my drawers i found my old (never tampered with in any way) Nexus One. Problem is after having KitKat on the Moto i just cannot stand using the old version of android thats on it.
I've been digging around in all of the old forums for rooting/unlocking bootloader/CWM etc... to update. I keep unfortunately hitting dead links as a lot of it probably hasnt been used for a number of years.
1 - I seem to have found 'SuperOneClick' to root and unlock bootloader (unsure if there is a better way)
2 - I can install CWM recovery via ROM Manager i believe?
3 - After this i tried to install ev_passion-4.0.0p4.2-pedro-squished but keep getting installation aborted.
Having looked a bit more i think its because i need to change partition sizes add a2sd etc... but the instructions get a bit muddled here as there have been so many different guides over the years.
Can someone confirm to me if steps 1 and 2 are correct and give me 'a dummies guide' to the changes i need to make and how to do them? any help of pointers would be much appreciated.
Thanks
SimonK9 said:
the only thing i am missing is a working video recording, its all delayed :/
Click to expand...
Click to collapse
Use the Videcam Illusion app.
I also recommend UCBrowser for bug free web browsing on kitkat.
And j00m's kitkat cuz it's slimmed down enough to fit on a 200MB system partition. And slimmer is faster.
richwright1 said:
...Problem is after having KitKat on the Moto i just cannot stand using the old version of android thats on it.
1 - I seem to have found 'SuperOneClick' to root and unlock bootloader (unsure if there is a better way)
2 - I can install CWM recovery via ROM Manager i believe?
3 - After this i tried to install ev_passion-4.0.0p4.2-pedro-squished but keep getting installation aborted.
Having looked a bit more i think its because i need to change partition sizes add a2sd etc... but the instructions get a bit muddled here as there have been so many different guides over the years.
Can someone confirm to me if steps 1 and 2 are correct and give me 'a dummies guide' to the changes i need to make and how to do them? any help of pointers would be much appreciated.
Click to expand...
Click to collapse
I just went through this a few days ago. I rooted/unlocked long ago so I don't remember anything about that, but after that this is what you need to do for Evervolv Kitkat (there are some variations but this is what I did):
1. You need to re-partition your internal space with Blackrose to increase your /system partition. For "core gapps" you need a 250 MB /system partition. I wanted the full Kitkat experience so I made my /system partition 325 MB so I could install the 4.4.2 "standard gapps" from BaNkS. I did this on a Windows computer. Watch the "Execute BREditor(standalone)" video (in the Blackrose OP). From the command prompt type "blackrose editor" to specify your system partition size and create the file. Then you run "fastboot flash hboot hboot_brcust.nb0" to repartition the N1.
2. The first time I tried to do this, I used an old CWM recovery, and it flashed Kitkat fine, but when I tried to use Mounts2SD it wouldn't work. I don't know what was wrong, but I decided to update my recovery to make sure, so I installed 4EXT recovery, wiped everything, re-created my 2 GB SD-EXT partition on my microSD card, and then I got everything to work.
3. So from 4EXT I flashed the Evervolv 1/2 nightly and standard gapps. Then I installed Mounts2SD and pressed the button to install the script. At first I checked all the boxes except Dalvik cache because someone said it runs faster if you keep it internal, but it took up all of the space in my /data partition and I was unable to install even moderately sized apps of just a few MBs. So I also checked Dalvik cache and now my /data partition is freed up and I can now install larger apps. It appears to need space in the /data partition for installation, before Mounts2SD moves it over to SD-EXT.
4. So now memory-wise, my N1 is great, but opening/closing apps seem a little sluggish. I'm using an old 4 GB probably Class 2/4 microSD card. I just ordered a 16 GB Class 10 card to try; hopefully that will eliminate the sluggishness.
My N1 feels relevant again.
I am reminded how much I liked the trackball notifications!
Kit Kat Rom
I have with blackrose hboot partition 260/10/166 with vj 4.2.2 Rom.
Can I install parkeddraccoon Kitkat Rom with the same hboot partition?
Or whether I have to repartition as mentioned by parkeddracoon using Blackrose?
i've installes parkedraccoons kitkat 11/1 version. But the soft buttons doesn't work besides the home button.
Have anyone else this problem or some troubleshooting?
rathinam said:
I have with blackrose hboot partition 260/10/166 with vj 4.2.2 Rom.
Can I install parkeddraccoon Kitkat Rom with the same hboot partition?
Or whether I have to repartition as mentioned by parkeddracoon using Blackrose?
Click to expand...
Click to collapse
The 220 MB requirement is a minimum requirement. Then, you can install this ROM with your current partition table. But if you use the data partition instead of an external one, I recommend to repartition with the most approximate space in system partition (i.e. if your installation has 220 MB, you can gain 30 MB extra for your data partition).
Maxwell_Dent said:
i've installes parkedraccoons kitkat 11/1 version. But the soft buttons doesn't work besides the home button.
Have anyone else this problem or some troubleshooting?
Click to expand...
Click to collapse
In the main thread of this ROM there isn't any post relative to this problem. Then, I think that is an isolate problem. I recommend to reinstall the ROM and try again. Be sure you have a little extra space in system partition after install the ROM (try the "df" command in a device terminal, using the terminal app or adb shell). One of my first problems was relative to that: not all files were saved in the system partition and the ROM had strange problems (eg. the initial configuration wasn't opened at the first start).
Enviado desde mi Nexus One mediante Tapatalk
Related
Update 05/10/2011: So, at this point I've just fallen too far behind the curve, and it doesn't look like I will be updating GladiAtrix any further. I'll still support v4.2.3 for 1.57 (which is pretty stable, and almost all the issues I've seen users have up to this point are the installation). I may at some point throw something together for myself to use and release it (as I don't care for the themes/mods of GingerBlur/GreyBlur), but at this point I'm doing all the mods manually and have no current plans to make a flashable zip out of it.
GladiAtrix 2 for 1.5.7 v4.2.3 CWMNews and Important Info - READ FIRST
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looks horribly out of place I know
04/14/2011 @ 10:00am: Download links are fixed. Sorry all! As I stated in my last post, I will be unavailable for the next few hours. I DO see your questions and I WILL answer them. Please be patient, this isn't my full-time job and I have other things that need my attention today. Thanks!
04/13/2011 @ 11:17pm - NOTICE on theme: The THEMED version does not have reboot/recovery. I've been too busy working out the other kinks to add it in. The NOTHEME version is just like v3 and older, with the reboot/recovery options intact, as well as all the other changes up to this point. That is the only difference between the two.
All the bugs with the fingerprint scanner, wifi defaulting to on, custom keyboards not working, etc. etc. should all be resolved. Please PM me or reply to the thread if you have any issues.
Version 4.2.3 is going to be considered base from here on forward. It will create a backup of all the files it changes and copy them to the root of the internal SD card. PLEASE copy this backup to some place safe. Going forward, all updates will be released on top of 4.2.3, and will create sequential backups of any new files changed, if there's a need to back them up. It does not have any feature updates since 4.2.1, just many bug fixes.
04/13/2011 @ 11:00am(ish) - NOTICE on Reboot/Recovery power menu options: These are currently removed. I added a theme, and I haven't had time to add reboot/recovery options to it yet. If someone who knows what they're doing would like to add them and send me the updated files, it would certainly expidite the process as I'm not even sure how I got them working in the first place on v1-3. Screenshots will be in the second post as soon as I get a moment to upload some.History and SummaryCWM finally released! Sorry for taking so long with it, I'm very picky about my work and wanted to test EVERYTHING and make sure it was all working as it was supposed to. I hope the extra effort pays off and nobody has any issues with this
I've removed the script version as there's no need for it anymore. CWM is safer and does everything we need it to do with the latest version.
This is only for AT&T phones running firmware version 1.57. If you have 1.52 or 1.26 please go here first: [SCRIPT] GladRoot (Bell 0.37.4, AT&T 1.26/1.52/1.57 Supported) If you are a Bell user, DO NOT INSTALL.
If you need the drivers, they are available here: 32-bit Drivers and 64-bit Drivers
If you run into any issues, please PM me or post your /data/local/tmp/ga2.log here. This will help me diagnose what went wrong, in the very unlikely event something goes wrong.
Come chat with us!Features:
Deodexed
Creates a backup of your current /system/app and /system/framework directories (This does NOT delete anything outside specific AT&T bloatware files, however)
Custom boot logo (animated version coming soon!)
AppWidgetPicker (better widget management)
Enables sideloading
Ad blocking
Installs AT&T tethering APN
Enables desktop flash content, i.e. Hulu (You MUST install flashplayer 10.2 from market prior to installing the ROM. You must also use a browser that lets you set your user agent to Desktop, such as Dolphin Browser HD)
Clears Dalvik-cache (can cause some third party apps to behave strangely, just clear their data. Known to cause issues with Launcher Pro. Reset of LP data fixes)
Removes the AT&T bloat (see second post for list of what is removed.)
Enables HDMI mirroring
Disables background media scanning (speeds phone up a LOT)
Webtop without need for dock (through micro-hdmi cable)
Xperia Arc theme (ported to Atrix by olieebur)
Preferred install location
Various speed increase enhancements to settings
Replaces stock Gallery with Miui 3D Gallery
Full market access, no more restricted apps (Currently under testing, as it doesn't seem to be working properly)
Installation instructions:
Download and install Tenfar's latest CWM Recovery.
Download the GladiAtrix2 v4.2.3 THEME zip file here or GladiAtrix2 v4.2.3 NO THEME zip here
If you want the Hulu hack to work, install 10.2 from the market now, BEFORE installing GladiAtrix2 v4.
Put the GladiAtrix2v4.2.3 zip corresponding to the version you selected (normal or notheme) on either internal or external SD card.
Boot into recovery.
Select “Install zip from SDCARD” using the volume keys to navigate and power button to select.
Select "choose zip from sdcard" if you put it on your external SD card, or "choose zip from internal sdcard" if you put it in phone memory.
Browse to the location you put the zip.
Select GladiAtrix2v4.2.3 zip corresponding to the version you selected (normal or notheme).
Install it!
Read disclaimer below
DISCLAIMER
This script makes significant changes to the /system files on your phone.
By downloading the files you agree that you KNOW WHAT YOU ARE DOING and that you accept responsibility if something goes wrong.
This has been tested to the best of my ability.
We are NOT responsible if this bricks your phone. Thank you.
-ManagementDownload LinksDownload GladiAtrix2 v4.2.3 FULL here
Download GladiAtrix2 v4.2.3 FULL NOTHEME hereChangelog:* Version 4.2.3 - Released 04/13/2011
Split the theme and notheme into their own versions
Rolled all updates up to this point into a full install
New base install version is this version, all future updates will be incremental.
Cleaned up install methods to not mess with any user settings
* Version 4.2.2 - Released 04/13/2011
Permission fix update for settings.db causing a massive number of issues
* Version 4.2.1 - Released 04/13/2011
Fixed HDMI mirror errors
Changed fingerprint to allow unrestricted market access
Added Motoblur widgets/apps back in as people seem to use them (myself included). AT&T bloat still removed.
Replaced stock MediaGallery with Miui 3D Gallery
Added ability to use webtop without dock through micro-hdmi
Minor settings changes for increased battery life/performance
Fixed issues with flash hack (recompiled the lib as it was corrupt)
Added option for preferred installed locations to Settings -> Applications
Imported Xperia Arc theme (ported to Atrix by olieebur)
* Version 3 - Released 04/10/2011
Now removes some of the Motoblur/AT&T bloat
Added custom boot logo (Animated version coming soon!)
Added HDMI mirroring support (Credit to Weichel)
Turned off stagefright media scanning
Added local.prop tweaks for performance increase
Fixed issues with tethering on non-AT&T carriers
* Version 2 - Released 04/08/2011
Initial CWM release.
Added custom flash lib for desktop flash content (i.e. hulu)
Installation logged with errors to /data/local/tmp/ga2.log
* Version 1
Initial script release.
Notes/thanks:Special thanks to: kennethpenn for the base installation instructions, shawnbuck/dasmoover/cranch/thews/sogarth/brandon15811/(anyone else I missed, apologies if I did) for all their insight on the script, and Chainfire for the use of his .sh recovery output methods, olieebur for the great work on the theme, weichel for the HDMI mirroring trick, and everyone who helped test in IRC.If you see any spelling errors or have any other problems, feel free to PM me or post here.
If you have any feature requests, PM ME them. Please read post #2 for my current To Do list to make sure it's not already on there. If you know how to do anything on the to do list and would like to help out, send me a PM. I will ignore any "cn u add grhpix to the statuss bar?" in the thread.
To Do
bootanimation - Make static logo into animation
Fix reboot/recovery options - Anyone that wants to help with this is more than welcome to.
kill sound on sd mount - Possible?
Uninstall script - Coming soon!
List of Motorola/AT&T apps removed
com.telenav.app.android.cingular.apk
com.att.myWireless.apk
com.blockbuster.app.moto.apk
com.ea.nfsshift.apk
com.mobitv.client.tv.apk
com.mtag.att.codescanner.apk
com.wavemarket.waplauncher.apk
com.yellowpages.android.ypmobile.apk
com.qo.android.moto.apk
Screenshots (coming soon!)Will post screenshots of the major highlights here, but right now, I'm going to bed.
first !! thanks
Ririal, is it possible to add the option to set "Edge network only" as the stock Android would allow?
PM'd u
When I go to run this it asked too allow superuser, but superuser never asked to allow anything on the phone? Phone just sits there?
Running silky smooth. I'll report errors if they arise.
s0dhi said:
Running silky smooth. I'll report errors if they arise.
Click to expand...
Click to collapse
When you run the .bat file did you have too allow superuser on the phone?
JayRolla said:
When you run the .bat file did you have too allow superuser on the phone?
Click to expand...
Click to collapse
Yes. There are 3 (I think?) points at which you have to allow superuser.
The user interface for the install is really well done.
JayRolla said:
When you run the .bat file did you have too allow superuser on the phone?
Click to expand...
Click to collapse
Never mind had to reboot phone a few times and then it worked.
Ririal said:
To Do
bootanimation - Anyone up to making one is welcome, I'm bad with graphics :x
preferred install location - Need to figure out how to do this.
kill sound on sd mount - Possible?
Fix typo in splash screen - Sigh.
Click to expand...
Click to collapse
there are a handful of boot animations here if anyone is interested. if there's something in particular you want, i'd be happy to give it a go. i too suck at the whole graphics thing, so i wouldn't expect too much.
Please pardon my ignorance, but a few questions:
1) I'm basically on stock 1.26 right now (rooted). Would I have to first flash/ota update to 1.57 (while retaining root and whatnot) and only then be able to install this?
2) or is 1.57 packaged within this and I just have to flash a clean 1.26, retain root, etc. and then flash this, thus updating me to 1.57 via this ROM?
I know they're somewhat silly questions, it's just that a LOT of what I've been looking for in a ROM lately is (almost literally) a one click to 1.57+root.
Thanks for bearing with me...and any kind of ETA on an RC? I see you were up until 5 putting this together, so thanks for your hard work.
This is after you have done retain root and updated and the afterupdate retain root.
Sent from my MB860 using XDA Premium App
xyrovice said:
Please pardon my ignorance, but a few questions:
1) I'm basically on stock 1.26 right now (rooted). Would I have to first flash/ota update to 1.57 (while retaining root and whatnot) and only then be able to install this?
2) or is 1.57 packaged within this and I just have to flash a clean 1.26, retain root, etc. and then flash this, thus updating me to 1.57 via this ROM?
I know they're somewhat silly questions, it's just that a LOT of what I've been looking for in a ROM lately is (almost literally) a one click to 1.57+root.
Thanks for bearing with me...and any kind of ETA on an RC? I see you were up until 5 putting this together, so thanks for your hard work.
Click to expand...
Click to collapse
You need a 1.57 rooted to proceed with this as it says in the OP. if you are at 1.26 rooted then use the retainroot in xda to get rooted on 1.57 and then use this.
Will this work on the Atrix on Bell?
itsonlym3 said:
there are a handful of boot animations here if anyone is interested. if there's something in particular you want, i'd be happy to give it a go. i too suck at the whole graphics thing, so i wouldn't expect too much.
Click to expand...
Click to collapse
I was looking for a custom one. I have a friend who's going to be whipping up some images for me, but you're welcome to take a stab at it.
xyrovice said:
Please pardon my ignorance, but a few questions:
1) I'm basically on stock 1.26 right now (rooted). Would I have to first flash/ota update to 1.57 (while retaining root and whatnot) and only then be able to install this?
2) or is 1.57 packaged within this and I just have to flash a clean 1.26, retain root, etc. and then flash this, thus updating me to 1.57 via this ROM?
I know they're somewhat silly questions, it's just that a LOT of what I've been looking for in a ROM lately is (almost literally) a one click to 1.57+root.
Thanks for bearing with me...and any kind of ETA on an RC? I see you were up until 5 putting this together, so thanks for your hard work.
Click to expand...
Click to collapse
This rom does not update you to 1.57. You will need to be on 1.57 with root before this will work.
jayhammy said:
Will this work on the Atrix on Bell?
Click to expand...
Click to collapse
No, it will not.
I have a 1.57 w/ root (using before/after update script). Will Deodexing my Atrix make it faster/snappier?
kpfury said:
I have a 1.57 w/ root (using before/after update script). Will Deodexing my Atrix make it faster/snappier?
Click to expand...
Click to collapse
A bit, yes.
Ririal said:
To Do
kill sound on sd mount - Possible?
Click to expand...
Click to collapse
If you figure this out please share how you did it.
I don't think that sound can be killed. But then again I'm no expert. Also are there any known issues with GladiAtrix?
I have it installed but can't really tell for now. Great great work man!!
Any chance of some screen shots of this theme? If we had CWM I would just flash and check it out.Thanks.
Sent from my MB860 using XDA Premium App
hi, all
I got my hands on Motorola Atrix 4G 4 days earlier from one of my friend.I like it very much ！ awesome phone ! better than my dead defy! This is my first release CWM recovery for Atrix 4G.
i should work as it should be but the ums and usb adb debug functions is not working .
it's just like the defy recovery, you can install this as a normal application.but you need to get your device rooted.and it's only for Motorola Atrix 4G aka MB860.
Comments and donations are wellcome. you can donate so that i can get myself a Atrix 4G, Thanks in advance.
UPDATED 2011-0408-1720 GMT +8
update to support nandroid to internal sdcard.and restore form internal sdcard.
add a "enable adb server" in advance menu, but still not working
download latest version:
View attachment MOTOA4_Bootstrap_0408_1720-signed.apk
UPDATED 2011-0408-1105 GMT +8
small change for recovery enter method, you can now enter recovery everytime you plug your ac charger when you phone is off. and you can change modes between recovery mode or poweroff charge mode inside the app.
it seems every thing is working right now, and i am going to add other partition support such as flash "bpsw" partion or "dev" partition , when this feture is add we can flash all partitions and we dont need to flash sbf files to downgrade or upgrade! awesome?
download old version:
View attachment MOTOA4_Bootstrap_0408_1103-signed.apk
UPDATED 2011-0406-1434 GMT +8
add support for update.zip in internal sdcard from main menu
add support for mount osh partition,so we can make update package for unbutu mod! great for devs!
fixed power off charging mode.
Download the old version: FIXED! update at 17L43pm GMT+8
View attachment MOTOA4_Bootstrap_0406_1730-signed.apk
UPDATED 2011-0404-1555 GMT +8
add support for choose zip from internal sdcard
add support for power off charging as some one requested.
Downlaod old version :
View attachment MOTOA4_Bootstrap_0404_1755-signed.apk
Please uninstall the old version ,then reinstall this new version.then reclick the "install recovery" button in the System Recovery Application. the every time you need to enter the recovery , you need to connect the ac charge then click the "Recovery Boot" button to boot into recovery.
Thanks donations from:
Emmanuel $10 sprocket84 $5 ofer $5 frankiedizzle87 $5 Squeak22 $10 Matthew $5 B.coffey $10 kennethpenn $20 Robert.K $10 Austin Roberts $10
germanh $10 faisal husain $5 CaelanT $10 tomerbn $10 Kavin M $10 Simpson S $5
Thank you all for your donations!
I will keep every donations in this post updated with your paypal Name. if you feel like don't want other forum viewers know how much you donate and even you don't want them know that you donated me, you can let me know via PM or via paypal message. I will not add your name to this thread !Thank you! An Official Atrix 4G in China is about 5000 RMB(about 700USD) without dock. it's about 7000 RMB with a dock (~1000 USD), so expensive that i can't afford. so your donations will help me a lot! Thank you!
if you feels that my work helps you ,please don't hesitate to click the thank button at the end of this post. thank you!
PS: i am trying to make other way to enter the CMW recovery mode.and i am going to make the osh partiton transparent to user. so we can mod the osh partition ,any devs interested in this?
FIRST!
Nice work btw. cant wait to have a complete recovery (clockwork)
For real?
In that case... Awesome
Fist to the OP thank you for this....just thought Id add some more info from the source site
Second edited due to development success on this Awesome work though do look into adb sbf withing the search function of the development thread and learn about them before using this so you have a way to go back
Removed the apk upload from this post the OP has been working and updating his progress XD and the download speeds much better than it was before XD
Third added the apk attachment that is said to install a working recovery, seems to be the only file downloadable from the source site... There is not alot of info there.
Click to expand...
Click to collapse
Fourth Added pics taken from the source posting... its all Chinese literally
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The below is the translated text via Google of the source posting
Posts by R editor masters at 2011-4-2 18:45
4 days ago I finally got this I heard a long time Atrix 4G, spent three days free time get the Recovery. And then spent one day free time a person considered to be more integration of the perfect ROM, hope you like it. The machine got my brother to feel that defy ah ~! Ha. Good. Machine performance very good, no loss is dual-core!
Haha, A4 custom Recovery Coming! No way in the use of other forums online updates, online updates will be a lot of messy problems occur. May not fully updated!
Installation:
Root for your cell phone first, root method see: http://bbs.goapk.com/thread-1667169-1-1.html
Apk installed then install the normal recovery;
Prompted the request su permission.
Then prompted to install success
Then ok. For details, please refer to the software tips.
Usage:
Switched off the phone into the AC charger, and then the phone will enter Recovery mode!
Keys Description:
Volume up and down switch, the power button to confirm
That said if this recovery even crashes you should be able to get to rsd mode and revert back to which ever base sbf you were using XD
Djazin said:
Fist to the OP thank you for this lead..just thought Id add some more info from the source site
Second This IS NOT Verified there is no release of a "flash able ROM" or kernel for that matter this posting is just for dev purposes and again its content and use is unverified
Third added the apk attachment that is said to install a working recovery, seems to be the only file downloadable from the source site... There is not alot of info there.
Fourth Added pics taken from the source posting... its all Chinese literally
The below is the translated text via Google of the source posting
Posts by R editor masters at 2011-4-2 18:45
4 days ago I finally got this I heard a long time Atrix 4G, spent three days free time get the Recovery. And then spent one day free time a person considered to be more integration of the perfect ROM, hope you like it. The machine got my brother to feel that defy ah ~! Ha. Good. Machine performance very good, no loss is dual-core!
Haha, A4 custom Recovery Coming! No way in the use of other forums online updates, online updates will be a lot of messy problems occur. May not fully updated!
Installation:
Root for your cell phone first, root method see: http://bbs.goapk.com/thread-1667169-1-1.html
Apk installed then install the normal recovery;
Prompted the request su permission.
Then prompted to install success
Then ok. For details, please refer to the software tips.
Usage:
Switched off the phone into the AC charger, and then the phone will enter Recovery mode!
Keys Description:
Volume up and down switch, the power button to confirm
Screenshot:
Click to expand...
Click to collapse
Thanks for you posting and attached the apk file. the original source is post by me for china users. this recovery include two languages. English and Chinese,because i am a Chinese. you can find a flashable rom in here.
http://bbs.goapk.com/thread-1667169-1-1.html
it's also for chinese users. the recovery supports amend and edify scripts.because it's based on clockworkmod 2.5.1.8! only the usb is not working.i didnt find out how to make the usb function work .
other function including backup is work. there is one think that the system partition is mounted when you enter the recovery. you can not umount it.
i will try my best to fix those bugs. if any one would like to help me.please let me know. thanks in advance
Jesus man, dont quote all thos pictuses! lol. Edited . Good work btw.
tenfar said:
Thanks for you posting and attached the apk file. the original source is post by me for china users. this recovery include two languages. English and Chinese,because i am a Chinese. you can find a flashable rom in here.
http://bbs.goapk.com/thread-1667169-1-1.html
it's also for chinese users. the recovery supports amend and edify scripts.because it's based on clockworkmod 2.5.1.8! only the usb is not working.i didnt find out how to make the usb function work .
other function including backup is work. there is one think that the system partition is mounted when you enter the recovery. you can not umount it.
i will try my best to fix those bugs. if any one would like to help me.please let me know. thanks in advance
Click to expand...
Click to collapse
Sweet okay lets get that Source for the ROM posted have you been able to test it yet? Im already going to download and mirror should have it ready in a few minutes still please confirm the RSD functionality of this recovery that is critical before we get everything posted here last we need is bricked or unrevertable Atrixs
Update RSD works XD jic
Anyone test yet?
Sent from Motorola Atrix on TELUS.
i would like to test it, but im not sure if rsd will work afterwards to reflash, since the op says usb is not working so, hmmm
crnkoj said:
i would like to test it, but im not sure if rsd will work afterwards to reflash, since the op says usb is not working so, hmmm
Click to expand...
Click to collapse
Same, I'd want a way to make sure I could restore if something went wrong.
Djazin said:
Sweet okay lets get that Source for the ROM posted have you been able to test it yet? Im already going to download and mirror should have it ready in a few minutes still please confirm the RSD functionality of this recovery that is critical before we get everything posted here last we need is bricked or unrevertable Atrixs
Update RSD works XD jic
Click to expand...
Click to collapse
it's a bootstrap recovery, it will not infact your phones rsd functionality. and you can use voldown + power button for more functions ,but i did figure out what those function are.
i tested it many times i cant even count it. it takes me so many flash to get a working recovery....! the last time i trying to port the clock work mod to defy , my defy is bricked~~
http://www.dangdeals.com/A4Bootstrap.rar
Just a few questions,
From what I understand this isn't a full recovery, but will it allow us to flash roms?
Thanks for all the work.
mafiaboy01 said:
Just a few questions,
From what I understand this isn't a full recovery, but will it allow us to flash roms?
Thanks for all the work.
Click to expand...
Click to collapse
Yes. But only roms based on original shipped versions. Custom roms like CM are not possible with bootstrap recovery.
Do backup/restore functions work?
Just a confirmation. The installation was very easy. I had to plug in ac adapter to boot into CWM recovery. I made a successful backup through recovery. If anyone is not familiar with CWM recovery, you use vol up/down buttons to go through menus and power button to select. The backup is created in external sdcard. This looks good so far.
ZoinksS2k said:
Do backup/restore functions work?
Click to expand...
Click to collapse
Haven't tried restore but backup went fine.
Trying in a bit.
If we can install packages, if only themes and the like, I'll be happy.
Nice job will test futher later on
ZoinksS2k said:
Trying in a bit.
If we can install packages, if only themes and the like, I'll be happy.
Click to expand...
Click to collapse
Agree. Even if this is not a full on recovery, we can at least do away with those scripts now.
ATTENTION: THIS INFORMATION IS DEPRECATED!
I am leaving the thread up for reference, but as I no longer have the device and haven't been keeping up on the development of the I537, many of these methods may not (and probably won't) apply any longer. Please search the subforums for recent information.
Disclaimer: If you post a successful ROM to the thread, I will gladly add it to the OP. However, I can't promise how quick I can do it. I am very busy with work. I will try to keep this thread as up-to-date as I possibly can.
Purpose: The point of this thread is to make a list of ROMs that have been confirmed to work on the SGH-I537 S4 Active using SafeStrap.
Feel free to ask any question you like pertaining to this topic. Noobs are welcome. Please do not flame other members.
Please provide feedback on what works or doesn't work! This community thrives when you share your experience.
Steps for flashing a ROM
1. Download a ROM file (must be 4.2.2 based with stock kernel)
2. Create ROM slot in SafeStrap
3. Flash the ROM and three update.zips: keys fix, camera patch, and modules fix (MF1, MF2, or MF3 depending on your stock firmware).
4. Wipe cache and dalvik.
5. Boot system
6. Report on how it works if you have problems and share any success.
Confirmed Working:
S4 Google Edition ROM
Goldeneye
SHOstock
MDOB
Graviton
Omega ROM I9505
WickedROM
Alpha - I had SuperSU problems, but flashed the latest SuperSU .zip here and now everything works great.
Hyperdrive - Make sure you flash the ATT compatability .zip in order to clear up the problem with SMS on LTE.
Will Not Work:
ANYTHING WITH CUSTOM KERNEL
_____________________________________
LINKS:
Hardware Key Patch
SafeStrap Dev Thread (modules fix zip in third post)
NEW:
I put together a "MasterPatch" for both MF1 and MF3, each which contains: respective modules, hardware keys fix, camera patch, and an edited gps.conf file which allows for a quicker GPS-fix in the U.S.
This is just to make things easier when flashing a new ROM built for the S4. Enjoy.
MF1 MasterPatch
MF3 MasterPatch
I posted this in another thread and thought it might be useful here.
You can more or less easily flash regular S4 ROMs onto our phones. Be aware that this has only been done in SafeStrap thus far. You could possibly make your phone unusable if you flash S4 ROMs as your only ROM without using SafeStrap.
To use a regular S4 ROM in SafeStrap:
Flash your desired regular S4 ROM into a new slot in SafeStrap. Currently you can only flash 4.2.2 TouchWiz based ROMs due to a kernel limitation with SafeStrap. I believe @Hashcode is still working on this and hopefully we will eventually be able to use any kernels with SafeStrap.
Without rebooting, flash the MOD file of your stock ROM. So if your stock ROM is MF1, then flash the MF1 MOD file. MF2....flash MF2 MOD file, and MF3...flash MF3 MOD file. The MOD files can be found here.
Again without rebooting, flash the camera fix that was put together by LeJay. The camera fix can be found here.
Finally flash the Hardware Key Fix that is attached in the first post.
Make your new ROM slot the active ROM slot and reboot your phone.
If any of this information is wrong please let me know and I will update this post so people don't brick phones. Please note that this has only been reported to work in SafeStrap so far, flashing regular S4 ROMs as your stock ROM could brick your device and has not been tested yet.
Just a quick update, I've confirmed that Hyperdrive, a ROM originally intended for Verizon works on the S4Active. See the picture below. Steps to get this working:
Download the latest version of Hyperdrive from here.
This is an Aroma installer, so as you work your way through the installer options choose the AT&T kernel, not the Verizon one.
After finishing the install, DO NOT REBOOT, flash your corresponding modules file (ex. MF3).
Flash LeJay's camera fix
Flash the keyboard fix in the first post.
Finally flash the AT&T Compatibility Pack on the Hyperdrive page so that your phone will work on the AT&T network. The default configuration for the phone has it set up to work with the Verizon network, so if you don't flash the AT&T Compatibility Pack you won't be able to get a signal.
The only thing I can't get to work correctly is the camera with the stock camera app, even with LeJay's fix. I downloaded Focal and I am able to take pictures, video, and panorama however when taking a panorama picture the display is rotated 90 degrees making. The camera is fully functional, it's just not perfect. EDIT: It sounds like the Focal issue has been resolved with the latest update to the app in the Play Store.
TL;DR Hyperdrive works out of the box on the S4 Active if you flash everything properly and in the correct order.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm curious to try Jedi ROM for s4 but I can't find a working link. Don't know if @ptmr3 knows it's not working.
GT-i9295(i537) running SafeStrap
Deadly Venom works same camera issues I used camera mx no 90 ° rotation https://play.google.com/store/apps/details?id=com.magix.camera_mx
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Others have posted that Goldeneye and SHOstock works. And of course the S4 Google Edition ROM works.
I wonder if this works vise versa to the S4?
MDOB confirmed working!
Mdob works, very nice slim version of stock with nice flashable add ons,when flashing progress bar will show nothing, just wait!
http://forum.xda-developers.com/showthread.php?t=2280556
I got Hyperdrive to work and I was excited but without being able to use aqua mode it defeated the purpose of having the S4A so I revert to Stock ROM. Really looking forward to the day that Aqua can be used on anything other than stock.
i537 Roms!
Can someone either post or show how these roms exactly work on installing them? So far I only got hyperdrive and google edition to work and still have not got GoldenEye,SHOstock or MDOB to work and I do not know if I may be doing something wrong but I don't understand I got others to work and not these ones that certain people say that work and I have the s4 active i537 model. Could someone PLEASE at least put a step by step with links for each Rom it'd be very appreciated as of right now its rough for me working a lot and trying to learn new stuff as I am a noob with some of this but I use to have the galaxy s3 but seems to be huge difference, THANK YOU!!
dealwitit187 said:
Can someone either post or show how these roms exactly work on installing them? So far I only got hyperdrive and google edition to work and still have not got GoldenEye,SHOstock or MDOB to work and I do not know if I may be doing something wrong but I don't understand I got others to work and not these ones that certain people say that work and I have the s4 active i537 model. Could someone PLEASE at least put a step by step with links for each Rom it'd be very appreciated as of right now its rough for me working a lot and trying to learn new stuff as I am a noob with some of this but I use to have the galaxy s3 but seems to be huge difference, THANK YOU!!
Click to expand...
Click to collapse
I've already provided these instructions in the second post of this thread. You shouldn't have to do anything different than you did for Hyperdrive of GPE, you may have just had bad downloads. Make sure you check the MD5 after you download to make sure you don't have a corrupted download.
Devo7v said:
I've already provided these instructions in the second post of this thread. You shouldn't have to do anything different than you did for Hyperdrive of GPE, you may have just had bad downloads. Make sure you check the MD5 after you download to make sure you don't have a corrupted download.
Click to expand...
Click to collapse
I figured it out, it was the size of the rom I made, I would like to know the sizes to make for roms that I could use all 4 slots if wanted but as of right now I am currently testing still but thank you so much for the reply!
dealwitit187 said:
I figured it out, it was the size of the rom I made, I would like to know the sizes to make for roms that I could use all 4 slots if wanted but as of right now I am currently testing still but thank you so much for the reply!
Click to expand...
Click to collapse
It would be nice if you could post the optimal slot sizes you end up with. There isn't much information in any of the SafeStrap threads on any of the S4's that say what sizes people are using.
If you feel up to it, I think it would be nice to say for example:
Code:
ROM: [URL="http://forum.xda-developers.com/showthread.php?t=2301724"]Hyperdrive[/URL]
System partition size: 2800 MB
Data partition size: 2500 MB
Cache partition size: 300 MB
Free space after booting slot: [B]XXXX[/B] MB
This way people would know how much space they have for apps, music, videos, etc. after they boot into their new slot.
Devo7v said:
It would be nice if you could post the optimal slot sizes you end up with. There isn't much information in any of the SafeStrap threads on any of the S4's that say what sizes people are using.
If you feel up to it, I think it would be nice to say for example:
Code:
ROM: [URL="http://forum.xda-developers.com/showthread.php?t=2301724"]Hyperdrive[/URL]
System partition size: 2800 MB
Data partition size: 2500 MB
Cache partition size: 300 MB
Free space after booting slot: [B]XXXX[/B] MB
This way people would know how much space they have for apps, music, videos, etc. after they boot into their new slot.
Click to expand...
Click to collapse
I completely understand right at the moment im in a rush to work but would like to test different sizes and inform people as well but I will say I tried every rom that is confirmed working besides Hyperdrive cause I had it working before but I will reply and update later tonight.. but I do believe this is what I was trying if its wrong I will correct it later as well but it was the lowest size you could do for system and data partition I will say..
*Safestrap*
system partition size - 1000
Data partition size - 1000
Cache partition size- 300
OP updated
This is awesome!!!! I thought my wifes att active was on deathrow. For the international roms like omega which kernel patch/module do you use? Im assuming mf3?
Brought to you by my Golden Eye powered ATT S4. Modified with Jkay mod, KT Kernel, and Xposed.
my-blue-snog-box said:
OP updated
Click to expand...
Click to collapse
It depends on what version your stock ROM is. If you go to about phone you can see what version of firmware you're on. You then flash the corresponding MOD file. Odds are if you accepted the latest AT&T update then you're on MF3.
Just tried the new AOSP 4.3 S4 rom here: http://forum.xda-developers.com/showthread.php?t=2348272 and it seems that the display doesn't show up on boot, all I can see is the notification light flashing different colors on boot and then a black screen and then reboot. So I never got into the OS itself. Still working on this to see if I can get it to work. I've flashed all of the patches required also. If it is ported for the S4 it should work with our patches right?
uvbeenzaned said:
Just tried the new AOSP 4.3 S4 rom here: http://forum.xda-developers.com/showthread.php?t=2348272 and it seems that the display doesn't show up on boot, all I can see is the notification light flashing different colors on boot and then a black screen and then reboot. So I never got into the OS itself. Still working on this to see if I can get it to work. I've flashed all of the patches required also. If it is ported for the S4 it should work with our patches right?
Click to expand...
Click to collapse
You're not going to be able to install that. It has a different kernel than the one we have on our phones. We can only install roms based off of TW or roms that use Samsungs stock kernels at the moment.
mutatismutandis said:
You're not going to be able to install that. It has a different kernel than the one we have on our phones. We can only install roms based off of TW or roms that use Samsungs stock kernels at the moment.
Click to expand...
Click to collapse
OK wasn't sure what kernel it ran from.
Sent from my Galaxy S4 Active.
CyanogenMod 10.1 working on the Archos 80 Cobalt!
This is oma7144's ROM, I've been able to get it running under a bit of guidace from oma and I thought I'd share it here if anyone else is interested.
The original thread is here - but this ROM is designed for Odys Genio tablet, which has basically the same specs as the 80 Cobalt. (RockChip 3066 chip)
As always, only flash if you know what you are doing, I am not responsible for anything you do or break.
New Version 1.3.4
Thanks danielo83 for putting this zip together
Oma CM10.1 v1.3.4
Battery problem fixed and ROM is now ready for daily use
- CWM 6.0.1.5 recovery
- System ext4
- Internal Storage 2,5 GB
- PhabletUI & Multiuser
- Device spoofed as Nexus
- Ethernet Support
- Init.d support
- USB-Hub enabled
- Gameloft compatible
- Gamepad (PS2, XBox, ...)
- Kernel modules (cifs, tun, lan, serial)
- latest hosts, su, su-binary, busybox
- MX Video-Player, Apollo & FX Sound
- Reboot Menue, CPU Tweaker, Pimp my Rom
- Dateimanager HD (Root)
- Trebuchet & Nova Launcher
Instructions
Before you do anything, download the file below and extract everything to your desktop, find 'Oma RK30 CM10.1 Format NAND.zip' and copy to your externalSD card
then unmount and remove the externalSD, this is very important because if you try to boot after flashing the rom, you will not have access to the internal SD - which means you can't flash files from CWM or do anything basically
Boot to bootloader
Turn off the tablet
Unplug from charger and USB
Hold the 'volume down' button and then hold the 'power button' to turn the device on and boot into bootloader, keep holding both until you see the boot screen
Connect USB and you will get "Unknown Device" message in windows
Install device drivers included in the zip below under x64 or x86 depending on your system - see gavroche's root thread if you are having trouble
Open up RKandroidTool.exe as administrator (located in RKDevelopTool_v1.35 folder)
- if you have trouble try different USB ports on your computer
You should see at the bottom of the RKAndroidTool "Found RK Android Loader Rock USB"
Click 'erase IDB' button - this will only take a few seconds
Now click 'Run' button, this will take a few minutes to install the ROM
Insert your external SD card
The device will boot into CWM, now choose install zip from sdcard (not internal), install Oma RK30 CM10.1 Format NAND.zip that you copied to your external SD earlier
Reboot, and enjoy CM10.1
--------------------------------------------------------
Downloads
http://www.mediafire.com/download/15wh4o4xwhec11o/OMA_4.2.2_CM10.1_Rom.zip
--------------------------------------------------------
What is working
Wifi
Camera
Display
Touchscreen
Battery info showing
...everything apart from mentioned below
Known Problems -
Scren flicker when rotating screen,
When battery is low the tablet wont wake up from sleep and the power button will only reboot it instead of waking it up
- Thanks to danielolsman
- To "fix" this you could install "no sleep" from the play store.
--------------------------------------------------------
If anyone is interested in helping get rid of these three problems please don't be shy.
I'm not a dev and I'm looking at fixing the bugs but don't really know where to start...
Credits
oma7144, gavroche
kage00,
Thanks for your effort!!! You're breathing new life into our tablets. We (I am sure there's a very big community alongwith me) who have been waiting for this.
I don't have my cobalt with me right now but will try and install at some point and feedback how it goes.
Are you also willing to work actively on issues and improvements. I am happy to help wherever I can. Perhaps, others will join in as well.
Thanks
Looking at the forum feedback from HUKD, the rom is not far from being a stable rom for day to day use. I see following general issues raised with this rom so far
1. Waking up issues after deep sleep in case when the battery is low
2. Rotation issues
3. Default language
4. Nexus port and therefore certain apps incompatibility
As mentioned earlier, I am happy to help wherever I can.
Thanks
Hey nikunj87,
Thanks for your support! I would love to be able to work on the issues with this rom but to be honest, I'm not a dev, not even close, and I wouldn't even know where to begin to start fixing the problems.
For the moment I'm looking at putting together a kernel from Archos' source and adding overclocking, I've never built a kernel before so it's a learning curve... don't hold your breath, haha!
I just thought I'd post this rom here to see if we could get some interest in the project and maybe get a dev's (or two's) attention to take a look at the problems, but for the moment it's just you and me who are interested in this..
I think the best we can do is wait for an update to this rom from Oma (the original dev), as you mentioned all the problems with this rom on the cobalt are problems that exist with the same rom on other devices. So maybe with a new update it will work a bit better.
Unless if we can get someone else who knows what they are doing to take a look at it...
kage00 said:
Hey nikunj87,
Thanks for your support! I would love to be able to work on the issues with this rom but to be honest, I'm not a dev, not even close, and I wouldn't even know where to begin to start fixing the problems.
For the moment I'm looking at putting together a kernel from Archos' source and adding overclocking, I've never built a kernel before so it's a learning curve... don't hold your breath, haha!
I just thought I'd post this rom here to see if we could get some interest in the project and maybe get a dev's (or two's) attention to take a look at the problems, but for the moment it's just you and me who are interested in this..
I think the best we can do is wait for an update to this rom from Oma (the original dev), as you mentioned all the problems with this rom on the cobalt are problems that exist with the same rom on other devices. So maybe with a new update it will work a bit better.
Unless if we can get someone else who knows what they are doing to take a look at it...
Click to expand...
Click to collapse
willing to lend a hand tho I am only new to this stuff as well!
I tried this ROM, it seems that OMA posted an AKKU Fix here
I will trie it soon....
There are some problems with the camera; its inverted. The provides fix did not solve the problem, does someone know how to fix it ?
Akku fix does not work
Sent from my Nexus 4 using xda app-developers app
Cool! looks like we've got some attention from the devs!
So there is a new version of this ROM over at this thread
edit ----> please take note, if anyone tests this ROM you will need to keep the same kernel from the existing package in OP and use that to flash with new ROM, Otherwise you risk having a bricked device
Aparently the battery problem exists, but netlars has a possible fix on this thread if anyone can test it that would be great. My tablet is off getting fixed, I had some problems with the touchscreen.
Also Oma was asking if anyone could test this too
Are these paths there?
/sys/devices/platform/rk30-battery/startget
/sys/class/rk30_battery/rk30_battery_start_timer_work
Click to expand...
Click to collapse
If anyone can test and reply here please, then I can tell him on the other thread.
Thanks
Battery problem is solved (see original thread)
CM10.1 is now ready for daily use.
(@Kage00: maybe its possible for you to make a new zip package with the new boot image found here?)
EDIT:
made a zip package myself : CrewRKTablets_RK30_Cobalt 80 by Oma_CM10.1_v1.3.4.zip
Thanks danielo83,
Nice one, I'll update the OP,
I got news back from Archos repair about my tablet / touchscreen problem. They decided to replace the whole unit, so I'm going to sell the brand new one and get a Nexus 7, which means I won't be able to play around with this ROM anymore becuase I won't have the tablet. I'm happy to still keep the thread open and you guys can tell me if there's anything to update in the OP
Thanks
edit----------
In the new version do you still have the screen flicker artifacts on rotate?
danielo83 said:
Battery problem is solved (see original thread)
CM10.1 is now ready for daily use.
(@Kage00: maybe its possible for you to make a new zip package with the new boot image found here?)
EDIT:
made a zip package myself : CrewRKTablets_RK30_Cobalt 80 by Oma_CM10.1_v1.3.4.zip
Click to expand...
Click to collapse
Not sure if anyone will see this but I own an unrooted/untouched Archos 80 Cobalt which I haven't used for months. Decided to dig it out for my son to play with but I can hardly fit any apps on it so looking in to alternative roms.
Came across this rom which I want to flash but I'm unsure on how to start. Do I have to root and flash CWM on to the tablet before doing anything in this thread or are the instructions in this thread all that I need to do in order to flash this rom on to an unaltered tablet?
Yes you will need to be rooted first before using this ROM, please follow this thread to get root and CWM on your tablet then you can flash this ROM with the instructions in the OP
Yeah the storage space is limited for some stupid reason on the stock ROMs, that shouldn't be a problem on this ROM, also if you find you dont like this ROM there is also another custom ROM here based on stock 4.0.4 firmware with better app storage space
the new version still has the rotate "problem".
Sent from my Nexus 4 using xda app-developers app
I just wanted to say as well, that Archos have released kernel sources (downloadable from their website) that are from May or June 2013 from memory. The last stock ROM built for this device was released in February 2013. Which means if anyone wants to try their hand at compiling the kernel from Archos source, it would be a newer kernel than what you are using now and it could possibly fix any left over problems with this ROM. I don't have any spare time to do it anymore, but if anyone was interested I'm sure you could find a walkthrough on XDA to tell you how to do it easily enough.
The kernel for this ROM at the moment is still the stock kernel from the stock 4.0.4 ROM, which is working, but maybe if a newer kernel was made from the sources it may work a lot better
app space and vold.fstab
Does anyone know if this ROM exists with 6gb of app space? I currently have the supersport ROM with 6gb app space and edited the vold.fstab to swap the internal and external sd cards. I’d like to do the same with this JB ROM.
How difficult would it be to edit the ROM to change the app space?
Does this ROM use the vold.fstab to set where the internal and external sd cards are mounted? (I think this has been changed in JB 4.3 but I’m not sure about 4.2.2)
Cheers, T
To be honest I'm not sure if it is possible, but you could ask the devs who made the ROM they would probably be able to tell you if it was possible or not. Have a look over at http://www.arctablet.com
You'd need to ask oma7144 or netlars
You could try to post in this thread and see what they say
kage00 said:
Yes you will need to be rooted first before using this ROM, please follow this thread to get root and CWM on your tablet then you can flash this ROM with the instructions in the OP
Yeah the storage space is limited for some stupid reason on the stock ROMs, that shouldn't be a problem on this ROM, also if you find you dont like this ROM there is also another custom ROM here based on stock 4.0.4 firmware with better app storage space
Click to expand...
Click to collapse
Can you please tell me why I'm getting this error when trying to follow the root instructions from?
http://forum.xda-developers.com/showthread.php?t=2066972
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm using Windows 8.1 64 bit
I'm doing this with USB debugging enabled and the device switched on as this is the only way I can get the 'ARCHOS' device to show in Device Manager under 'Other Devices.
If I put the tablet in to download mode (power + vol down) I get a dead Android symbol with red exclamation, is this normal? However when I insert USB cable in to the device at this point my computer doesn't bring up the 'ARCHOS' device in Device Manager...
All I get then is this:
I don't actually have this tablet anymore, but I remember mine being a bit strange when I first tried to root it too. It can be a bit temperamental... I remember reading someone saying somewhere about leaving the charger plugged in when trying to reboot into download or recovery mode, if that doesn't work try with the USB cable (or both) plugged in while you try.
I also remember with mine I had to direct windows to the specific driver folder extracted from the zip based on which drivers you need, eg, x86 or x64 etc.
You could also look at this thread http://www.freaktab.com/showthread.php?3244-Archos-80-Cobalt-900-supersport-rom where the might be more info on root.
I'm using windows 7 though, so I don't know exactly what differences there are with win 8.
If all else fails just keep searching and reading all/any forums you can find about rooting the thing, I'm sure you'll find that someone has had the same or similar problem
good luck
kage00 said:
I don't actually have this tablet anymore, but I remember mine being a bit strange when I first tried to root it too. It can be a bit temperamental... I remember reading someone saying somewhere about leaving the charger plugged in when trying to reboot into download or recovery mode, if that doesn't work try with the USB cable (or both) plugged in while you try.
I also remember with mine I had to direct windows to the specific driver folder extracted from the zip based on which drivers you need, eg, x86 or x64 etc.
You could also look at this thread http://www.freaktab.com/showthread.php?3244-Archos-80-Cobalt-900-supersport-rom where the might be more info on root.
I'm using windows 7 though, so I don't know exactly what differences there are with win 8.
If all else fails just keep searching and reading all/any forums you can find about rooting the thing, I'm sure you'll find that someone has had the same or similar problem
good luck
Click to expand...
Click to collapse
Hi do you have any idea how to get XBMC working with this rom? XBMC just goes back to home screen whenever i try launching it?
For xbmc you will need an older version of it. The one from August seemed to be the one to use for most people with the same issues on the HP slate 7 so am guessing it will sort your issue too. A quick search on Google should locate the archives for you
Sent from my ARCHOS 80G9 using Tapatalk
hello there,
I know not many people own model 7320.
There is no updates or new ROMs at all for it
Was wondering if there is some developer that is willing to port some other ROM (4.3) to our (my) device
I am willing to start some support actions for that.
I love my tablet but software is too old...
Suggestions welcome
strazicic said:
hello there,
I know not many people own model 7320.
There is no updates or new ROMs at all for it
Was wondering if there is some developer that is willing to port some other ROM (4.3) to our (my) device
I am willing to start some support actions for that.
I love my tablet but software is too old...
Suggestions welcome
Click to expand...
Click to collapse
No. Neither http://forum.xda-developers.com/member.php?u=3081699, nor http://forum.xda-developers.com/member.php?u=5019846 have this device. And there are no other developers with GT8.9.
DemonGloom said:
No. Neither http://forum.xda-developers.com/member.php?u=3081699, nor http://forum.xda-developers.com/member.php?u=5019846 have this device. And there are no other developers with GT8.9.
Click to expand...
Click to collapse
As you should remember, Arlic was the only dev of p7320 but unfortunately he disapeared suddenly...
Anyway, I am still satisfied on his rom:
http://forum.xda-developers.com/showthread.php?t=1923371
btw. there are some November's releases of stock roms at sammobile.
It is still 4.0.4 but I wonder if it comtain any improvements over previous builds?
Is your 7320 on Tegra or some diffrent SoC? I cant find reliable info...
pax0r said:
Is your 7320 on Tegra or some diffrent SoC? I cant find reliable info...
Click to expand...
Click to collapse
p7320 - SoC Qualcomm (2x1.5 Ghz, Adreno 220)
p7300/p7310 - Tegra 2
strazicic said:
hello there,
I know not many people own model 7320.
There is no updates or new ROMs at all for it
Was wondering if there is some developer that is willing to port some other ROM (4.3) to our (my) device
I am willing to start some support actions for that.
I love my tablet but software is too old...
Suggestions welcome
Click to expand...
Click to collapse
I have just made a new kernel, but it is based on ICS.
You can get it here:
Downloads:
https://sourceforge.net/projects/kernel-p7320t-ics/files/
Source:
https://github.com/CL0SeY/kernel_P7320T_ICS
The features so far are:
Interactive CPU governor available for selection (was left out of the stock kernel for some reason). If you want to enable this governer you will need to firstly get ROOT for the tablet, and then install some app to control it, e.g. Voltage Control. If you enable this, it should give you a more responsive tablet, compared to using the default ondemand governer.
Max CPU frequency "UNICPU" bumped to 1512MHz from 1242MHz. This is the maximum frequency that you will see the tablet sitting on at times. If you are concerned about battery usage you can tweak this the maximum frequency value down using using Voltage Control or other apps.
USB charging and notification, as per glitschi667 / pershoot's patch, which was previously in a honeycomb custom kernel: http://forum.xda-developers.com/showthread.php?t=1569122 . The tablet will show as charging when plugged into a PC with enough power, whereas previously you would see the red X over the battery icon.
Wow!
Do yoy think it will work with Arlic's ROM (I am still on)?
Does it actually change charging method or just change the visualisation of the status (i.e X replaced by powering)?
Many, many thanks !!!,
I hope it is just the beginning of your magic here...
janla said:
Wow!
Do yoy think it will work with Arlic's ROM (I am still on)?
Does it actually change charging method or just change the visualisation of the status (i.e X replaced by powering)?
Many, many thanks !!!,
I hope it is just the beginning of your magic here...
Click to expand...
Click to collapse
Not too sure if it will work with Arlic's ROM. You could give it a go at your own risk, if you were keen.
The USB charging is more than just a display thing, it should work the same as glitschi667 / pershoot's one. I didn't want to advertise the charging capabilities too much without trying it myself but I can report now that it seems to charge fine off my laptop.
I will probably try next flashing the AOKP test build from the i957 forum as people have reported that it works, to some extent. I shall report back.
CL0SeY said:
Not too sure if it will work with Arlic's ROM. You could give it a go at your own risk, if you were keen.
The USB charging is more than just a display thing, it should work the same as glitschi667 / pershoot's one. I didn't want to advertise the charging capabilities too much without trying it myself but I can report now that it seems to charge fine off my laptop.
I will probably try next flashing the AOKP test build from the i957 forum as people have reported that it works, to some extent. I shall report back.
Click to expand...
Click to collapse
I have a preliminary GT-P7320T AOKP 4.1.2 ROM working based off dan-htc-touch's http://forum.xda-developers.com/showthread.php?t=1899018
I had to change the mount point for /data inside the fstab.qcom file inside the boot.img. It has to be
/dev/block/mmcblk0p28
and NOT
/dev/block/mmcblk0p26
I will hopefully report back soon. If this turns out to be all the "migration" that we need to use ROMs from the SGH-i957, it's looking good. Beware though that while they have a few devs working on ROMs it isn't extremely active over there either (http://forum.xda-developers.com/galaxy-tab-8-9/i957-development)
CL0SeY said:
I have a preliminary GT-P7320T AOKP 4.1.2 ROM working based off dan-htc-touch's http://forum.xda-developers.com/showthread.php?t=1899018
I had to change the mount point for /data inside the fstab.qcom file inside the boot.img. It has to be
/dev/block/mmcblk0p28
and NOT
/dev/block/mmcblk0p26
I will hopefully report back soon. If this turns out to be all the "migration" that we need to use ROMs from the SGH-i957, it's looking good. Beware though that while they have a few devs working on ROMs it isn't extremely active over there either (http://forum.xda-developers.com/galaxy-tab-8-9/i957-development)
Click to expand...
Click to collapse
OK, so for the game people here that want to try this out... ensure you have a stock image from sammobile ready to plonk back on your device if you're unhappy with it...
Also once I get enough posts up I might be able to make a thread in the appropriate forum
ROM (flashable CM zip): aokp_p7320t_DannoRom_Nov-03-12.CL0SeY.20131124.zip (https://drive.google.com/file/d/0B48JIYNc4wvsT2txZS16WGV0MUE/edit?usp=sharing)
GAPPS required: http://goo.im/gapps/gapps-jb-20121011-signed.zip
Procedure:
(This has only been tested moving from a STOCK ICS ROM. Unsure if it will work for Arlic's ROM. If it all goes wrong try from a stock ICS ROM.)
Ensure you have a CWM recovery installed, see http://forum.xda-developers.com/showthread.php?t=1569122
* Copy the zips to your tablet
* Reboot into recovery
* WIPE data
* Install aokp_p7320t_DannoRom_Nov-03-12.CL0SeY.20131124.zip
* Install gapps-jb-20121011-signed.zip
* Reboot and enjoy!
Known working:
* Display
* 3G/4G/LTE
* Wifi
* Sound (headphones, speakers)
Known issues:
* Google play store seems to lose its network connection after a while. This seems to be a common problem amongst other ROMs.
* Plenty that we don't know about yet
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CL0SeY said:
OK, so for the game people here that want to try this out... ensure you have a stock image from sammobile ready to plonk back on your device if you're unhappy with it...
Also once I get enough posts up I might be able to make a thread in the appropriate forum
ROM (flashable CM zip): aokp_p7520t_DannoRom_Nov-03-12.CL0SeY.20131124.zip
Click to expand...
Click to collapse
Great work!
I am going to give it a try next weekend or so.
Need to be sure no reverting problems will be while downgdading,
Definitely you should start new tread.
There is a typo in the filename of the rom?
should be p7320 instead p7520.
janla said:
Great work!
I am going to give it a try next weekend or so.
Need to be sure no reverting problems will be while downgdading,
Click to expand...
Click to collapse
Do you mean about going back to stock after trying it out? I have tried it myself going back to the sammobile OTA image fine.
janla said:
There is a typo in the filename of the rom?
should be p7320 instead p7520.
Click to expand...
Click to collapse
Yes! Thanks for picking that up... I was making the ZIP in a bit of a hurry It's definitely a typo.
---------- Post added at 05:26 PM ---------- Previous post was at 05:19 PM ----------
CL0SeY said:
Yes! Thanks for picking that up... I was making the ZIP in a bit of a hurry It's definitely a typo.
Click to expand...
Click to collapse
And the file is now named correctly
I have also succeeded in booting this ROM (CM10/JB 4.1) by using the same minor modification, but haven't uploaded my version for p7320 yet:
http://forum.xda-developers.com/showthread.php?t=1867579
It seems to be a smoother build than the AOKP one. If anyone wants me to upload it please let me know.
Also, if techy people are interested, I can make up a short guide for making a P7320 ROM out of a SGH-i957 ROM. This might be better for the "long term evolution" (pun intended ) of the tablet. But let me know if there is demand for it.
CL0SeY said:
I have also succeeded in booting this ROM (CM10/JB 4.1) by using the same minor modification, but haven't uploaded my version for p7320 yet:
http://forum.xda-developers.com/showthread.php?t=1867579
It seems to be a smoother build than the AOKP one. If anyone wants me to upload it please let me know.
Also, if techy people are interested, I can make up a short guide for making a P7320 ROM out of a SGH-i957 ROM. This might be better for the "long term evolution" (pun intended ) of the tablet. But let me know if there is demand for it.
Click to expand...
Click to collapse
OK guys, here's a nice little nugget for the weekend.
I've followed the instructions for making a CM10 ROM for the i957 above, and simply changed the mount point and have it working on the P7320.
The ROM (cm-10-20131130-UNOFFICIAL-p7320.zip) should appear in this folder as soon: https://drive.google.com/folderview?id=0B48JIYNc4wvscVpIZkRKZWd4RmM&usp=sharing
I've tested wifi, 4g, and that is about it. Once again flash at your own risk yada yada yada...
MASSIVE thanks to @nrvate for the guide! I would like to see if we can do something potentially with the upgrade scripts to make them generic. between the p7320 and i957. I suspect this ROM will work fine on the i957 with the reverse fix (ie. make it use mm block 26 instead of 28).
Also I will make a proper thread for this work soon enough...
thanks a lot for participating CL0SeY
It is great that we are moving somewhere ...
I have wish to start working on cooking but building house and 2 little children are taking all of my time (with full right
Where do people think the p7320 dev stuff should go? The I957 is sui similar, but I think people will find it easier in the other development section?
CL0SeY said:
Where do people think the p7320 dev stuff should go? The I957 is sui similar, but I think people will find it easier in the other development section?
Click to expand...
Click to collapse
I think that the "Galaxy Tab 8.9 Android Development" is the right place.
Oh, btw... I installed the CM10 to my P7320 and currently testing everything...
Issues :
Camera does not work. Camera app starts, but there's no image.
_kankea said:
I think that the "Galaxy Tab 8.9 Android Development" is the right place.
Oh, btw... I installed the CM10 to my P7320 and currently testing everything...
Issues :
Camera does not work. Camera app starts, but there's no image.
Click to expand...
Click to collapse
Same here, thanks for giving it a go and the feedback . Also, the auto brightness seems to be very unpredictable, I think it's something wrong with the values coming back from the sensor.
I've been bashing my head against a wall trying to get us up to at least cm10.1 without too much luck so far. Compiling is quite a slow process even on an SSD, so it can take a while between fixing build errors.
_kankea said:
Issues :
Camera does not work. Camera app starts, but there's no image.
Click to expand...
Click to collapse
There is a patch for the camera in the i957 thread: http://forum.xda-developers.com/showpost.php?p=31382526&postcount=47
I've downloaded it and applied it to my p7320 and it works fine.
I will incorporate it into my next update.
Other things I've noticed:
. The boot animation sometimes displays, sometimes doesn't
. Applications that want to write to USB storage seem to fail
CL0SeY said:
There is a patch for the camera in the i957 thread: http://forum.xda-developers.com/showpost.php?p=31382526&postcount=47
I've downloaded it and applied it to my p7320 and it works fine.
I will incorporate it into my next update.
Other things I've noticed:
. The boot animation sometimes displays, sometimes doesn't
. Applications that want to write to USB storage seem to fail
Click to expand...
Click to collapse
Yeah, camera works now \o/
I read from the i957-thread that the boot animation problem is a known issue...
The vibration seems to be a bit powerless...
But still, I have waited for ages that anything newer than ICS appears for this device. Great job, CL0SeY! :good:
EDIT:
Mobile hotspot function (tethering) does not seem to work...