Database Develop

Gears Pairing problem

i have trying to sync my gear with my note 10.1 2014 but the gears stay in paring mode and when i try to connect with bluethoot it's disconnect after 2-3 sec... i reboot the gear and she stay always in the pairing mode ( in the screen i see a phone who touch the gears case in NFC ) and i can do nothing, my only other solution is wainting to have 4.3 in my canadian S4 for open the gears manager to exit this mode ???

nicgsxr said:
i have trying to sync my gear with my note 10.1 2014 but the gears stay in paring mode and when i try to connect with bluethoot it's disconnect after 2-3 sec... i reboot the gear and she stay always in the pairing mode ( in the screen i see a phone who touch the gears case in NFC ) and i can do nothing, my only other solution is wainting to have 4.3 in my canadian S4 for open the gears manager to exit this mode ???
Click to expand...
Click to collapse
Make sure you have both GearManager 1.4 installed and the stub. Apk (check this forum for the stub app). After you've tried once, check /sdcard/gear/ for any .apks and install them. When you try to pair, if you don't see a prompt on your device, hit home and check notifications for a pairing prompt then if you have to approve that way, go right back to Gear Manager using task switcher (don't launch from main shortcut).
I'm available tomorrow during the day to assist via TeamViewer if you'd like. I'm almost done with my tutorial that should work with any device running >4.2 and working BT4.0. It will include files too. Just trying to get weather working first.
Running PACman (Paranoid Android [Cyanogen Mod]) on Galaxy S4.

rainabba said:
Make sure you have both GearManager 1.4 installed and the stub. Apk (check this forum for the stub app). After you've tried once, check /sdcard/gear/ for any .apks and install them. When you try to pair, if you don't see a prompt on your device, hit home and check notifications for a pairing prompt then if you have to approve that way, go right back to Gear Manager using task switcher (don't launch from main shortcut).
I'm available tomorrow during the day to assist via TeamViewer if you'd like. I'm almost done with my tutorial that should work with any device running >4.2 and working BT4.0. It will include files too. Just trying to get weather working first.
Running PACman (Paranoid Android [Cyanogen Mod]) on Galaxy S4.
Click to expand...
Click to collapse
for pairing with my S4 or my note 10.1 2014 ?

if you can me a stepb by step clear to translate in french ahahah
i have a s4 no root with 4.2
and note 10.1 2014
i waiting for the 4.3 update this month with bell canadian

I had this problem yesterday. Reflashing via Odin was the only way I could resolve it.

Mi|enko said:
I had this problem yesterday. Reflashing via Odin was the only way I could resolve it.
Click to expand...
Click to collapse
what i need exactly and where i find it to make it, it's a galaxy gear canadian i dont know if it change something for the flash ??
i want use them before i have my update on my S4
can you make me little how to ???

nicgsxr said:
what i need exactly and where i find it to make it, it's a galaxy gear canadian i dont know if it change something for the flash ??
i want use them before i have my update on my S4
can you make me little how to ???
Click to expand...
Click to collapse
I'm in the US and flashed the UK version for myself. What do you need to know? Grab the FW you need from the FW thread and then follow the instructions to flash in the "rooting" thread (follow the steps to unroot/recover).

New watch, never paired: Can I flash a new ROM?

Hi,
I got my Galaxy Gear. I have a Galaxy Nexus, but I found I cannot pair it with the gear. So the gear has never been paired with a phone.
Can I put a new ROM on it? Will it ask for pairing again after I put a new ROM on?
Or do I need to find someone to at least remove the annoying pairing request?
Best
Tom

Have you tried manually syncing it by going to the phone's bluetooth setting and syncing it there instead of using the Gear cradle against the back of the phone?
Ian B

I wonder if manually install the Gear manager on your phone if that will give you the functions. It should connect to Bluetooth fine.

That did not work. I installed apk from gear manager one by one (except the ones that didn't install), started gear manager and tried to pair manually. Galaxy Nexus indicated a paired gear device, but syncing did not work. So it was back to start..

http://forum.xda-developers.com/showthread.php?t=2539082
Here is a link to making it happen

OK, thank you. Will try that and report.

datomm said:
OK, thank you. Will try that and report.
Click to expand...
Click to collapse
try this link it works
http://forum.xda-developers.com/showthread.php?t=2540627&highlight=cradle

Suter argimpr
Sorry, I did not understand.
How does writing the NFC tag help?
Also, I tried to flash the new MK7 rom with odin but after I brought the watch into download mode and started odin, selected firmware and clicked start, odin quickly returns and reports "succeed 0/ failed 0".

datomm said:
Sorry, I did not understand.
How does writing the NFC tag help?
Also, I tried to flash the new MK7 rom with odin but after I brought the watch into download mode and started odin, selected firmware and clicked start, odin quickly returns and reports "succeed 0/ failed 0".
Click to expand...
Click to collapse
i had the same problem. i had s4 and new gear but upon using the cradle it always show faile. so i connect it manually then after succesful connection. i used the witer. and disconnect the gear. connect to new gear. then it works.
maybe the cradle dont have yet the id of the gear that why the writer has been release.
it works for me.

datomm said:
OK, thank you. Will try that and report.
Click to expand...
Click to collapse
After a lot of trying, I finally managed to install the NULL_13 rom on the gear.
The last step of flashing the rom in recovery mode was especially difficult, since windows suddenly did
not recognize the watch like before, but only a Samung Android device and the driver did not work.
I had to switch to MacOS to use "adb push ..". That worked.
Thanks for all the hints.

[Q] I can't connect my Gear with my smartphone

Good night,
I purchased a Samsung Gear Live but I can't connect to my phone.
The gear screen only shows "Install Android Wear on your phone" and no displays the model name with the four-digit pin to pair.
Anyone know how to fix this?
Thanks in advance for your support.
Greetings.

There is nothing to be fixed.
First install from google play app called Android Wear.
Then pair your phone and watch via bluetooth.
That should do it for starters.

Dat0r said:
There is nothing to be fixed.
First install from google play app called Android Wear.
Then pair your phone and watch via bluetooth.
That should do it for starters.
Click to expand...
Click to collapse
Hi bro,
I have installed the Android Wear app on my smartphone, but don't recognize the smartwatch.
That is my problem.

Ok. I misunderstood you.
I've been there while trying custom rom.
I figured out that this is BT issue and tried to fix it with pkgs from other rom but eventually failed.
Reinstall stock rom KMV78Y. Oops... I can't place direct link because of newbie status.
Follow thread http://forum.xda-developers.com/gear-live/development/rom-octamodwear-stock-root-busybox-t2834620
but do not install octamod. use link presented in downloads in that post.
then update system twice with ota and you should be up to date

Help please!!!
I have been trying this for a few days , I thought I actually got somewhere till my cmd can't open the boot .Img and system.Img and now my watch is unable to connect to my phone and is unlocked I can't even relock it not sure why

I am at my wits end here. I'm about to just break down here. G900A help please

So, I have a Galaxy note 3 G900A. Not sure what version and I don't have access to that. So, it has the Alliance rom installed on it. It was working fine for months with absolutely no problems. Then all of a sudden, earlier, it said NFC has stopped working, over and over again. Then, I turned off the phone and it failed to turn on. It will not get past the splash screen. It just wants to stay dark and if I leave it alone long enough, it automatically goes into recovery mode. I can get into recovery mode and download mode normally. I already tried factory reset and all of that. None of my computers will recognize the phone and I have tried multiple cables as well. Odin won't recognize it and neither will samsung kies. I tried installing stock rom through SD card and it says
Verifying update package:
E:Footer is Wrong
E: Signature Verification Failed.
It does that no matter what rom I try to install. I can't afford to get another phone right now and it is the only one I have and I just don't know what else I can do. Any help is greatly appreciated.

Well to start backwards, the stock recovery isn't really meant to flash zips, but it should go farther than saying Footer Is Wrong
Signature Verification has failed. For me, it says that, then if you wait a few seconds, it'll say a few other things, then install from sd card complete and it wipes data and cache then reboots. Next, you have to use an official cable for that, Media Transfer doesn't work correctly without oem cable
Sent from my SM-N9005 using Tapatalk

Have you tried reinstalling the drivers on your pc or tried a different pc?

spookykidmm said:
Well to start backwards, the stock recovery isn't really meant to flash zips, but it should go farther than saying Footer Is Wrong
Signature Verification has failed. For me, it says that, then if you wait a few seconds, it'll say a few other things, then install from sd card complete and it wipes data and cache then reboots. Next, you have to use an official cable for that, Media Transfer doesn't work correctly without oem cable
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
I do use an oem cable. Same thing. The rest of what you said does happen though.

dustincrock said:
I do use an oem cable. Same thing. The rest of what you said does happen though.
Click to expand...
Click to collapse
The cord is funky sometimes. Try to "mangle" it a little bit to see if odin will say "Added!". I know I have to basically wrap mine around the computer to get it to work correctly
Sent from my SM-N9005 using Tapatalk

sparx said:
Have you tried reinstalling the drivers on your pc or tried a different pc?
Click to expand...
Click to collapse
Yes I have. Still the same problems.

dustincrock said:
Yes I have. Still the same problems.
Click to expand...
Click to collapse
Any luck?
Sent from my SM-N9005 using Tapatalk

spookykidmm said:
Any luck?
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
No. No luck..

A Last Resort
dustincrock said:
So, I have a Galaxy note 3 G900A. Not sure what version and I don't have access to that. So, it has the Alliance rom installed on it. It was working fine for months with absolutely no problems. Then all of a sudden, earlier, it said NFC has stopped working, over and over again. Then, I turned off the phone and it failed to turn on. It will not get past the splash screen. It just wants to stay dark and if I leave it alone long enough, it automatically goes into recovery mode. I can get into recovery mode and download mode normally. I already tried factory reset and all of that. None of my computers will recognize the phone and I have tried multiple cables as well. Odin won't recognize it and neither will samsung kies. I tried installing stock rom through SD card and it says
Verifying update package:
E:Footer is Wrong
E: Signature Verification Failed.
It does that no matter what rom I try to install. I can't afford to get another phone right now and it is the only one I have and I just don't know what else I can do. Any help is greatly appreciated.
Click to expand...
Click to collapse
As a last resort, put the device into download mode and connect to KIES 3. Go to tools and do a complete reinstallation. This will return you device to full factory specs and latest approved software, no custom ROM, no root, and no saved data. But at least you will have a functioning device. As soon as possible look into getting a new battery.

zancro said:
As a last resort, put the device into download mode and connect to KIES 3. Go to tools and do a complete reinstallation. This will return you device to full factory specs and latest approved software, no custom ROM, no root, and no saved data. But at least you will have a functioning device. As soon as possible look into getting a new battery.
Click to expand...
Click to collapse
I even used different batteries. And kid won't work because the phone isn't detected by the computer as being a phone. Kies doesn't pick up the phone, even in download mode

dustincrock said:
I even used different batteries. And kid won't work because the phone isn't detected by the computer as being a phone. Kies doesn't pick up the phone, even in download mode
Click to expand...
Click to collapse
Your only remaining option might be to send your device away for professional help. In the past I have used the services of Josh at: http://mobiletechvideos.com/ . (I am not related to that organization in any way.) For around $50.00 they can do a complete refresh, and in my case offered to root and load the custom ROM of my choice for a small additional fee. It took about one week.
Good luck.

G900A?
zancro said:
Your only remaining option might be to send your device away for professional help. In the past I have used the services of Josh at: http://mobiletechvideos.com/ . (I am not related to that organization in any way.) For around $50.00 they can do a complete refresh, and in my case offered to root and load the custom ROM of my choice for a small additional fee. It took about one week.
Good luck.
Click to expand...
Click to collapse
I checked back to see if you had solved the problem and noticed something I missed earlier... Your OP says you are using a G900A. Are you referencing a Note 3 or some other device?

COMPLETE Galaxy Gear Guide for 2017 (Root, Mod, etc.);

I spent several DAYS getting this watch to work properly (and by properly, I mean rooted and with a new mod).
You DO NOT need an approved phone for this to work! This will allow your watch to work with virtually any phone.
All you need is a Windows PC (with Odin and the Samsung ADB drivers, although these may not be necessary...), your watch, the charging cradle, USB cord and Wondershare (although there are alternatives to this...).
Because I am a new user and can't submit links, this next part is going to SUCK for you:
Here are things to download:
Samsung ADB Drivers - Google!
The Latest Version of Odin - Google!
Wondershare MobileGo for Andoid - Google it!
V700XXUAMK7 Firmware (Build Date: 13.11.2013 -> Region: BTU (United Kingdom) PDA: V700XXUAMK7 Changelist: 2124806 Android: 4.2.2 ) - Easy to Google
Null TWRP (You can find on this forum)
SuperSU ZIP FILE (Do not open) - (Google for "SuperSU Flashable Zip" )
THE REAL NULL ROM 23!!!! Working as of 1/10/2017 - THANKS TO dbest1010
There are several pitfalls that are introduced because of how OLD most of the information on here is.
First, when you turn on your watch, you may be wondering, how can I get into USB Debugging mode?
If you are stuck on a screen that is looking for a phone to connect to the device (and this may happen more than once during this process), then you need to know this VERY SIMPLE TRICK:
Press your finger over the area where the bottom of the screen is. An orange and black box should appear with some numbers/letters in it. Do this repeatedly. A LOT. Keep pressing it. Sometimes swipe up a little or down a little, it doesn't matter, just keep rubbing it like it was your lover. Before long (sometimes it takes a couple of minutes, seriously, do not give up), the phone will go to semi-normal operation.
This will allow you to go into the settings and hammer near the version area several times (unlocking developer mode), which on the previous screen will allow you to select for USB debugging.
I'm not sure why this trick is not explained very well elsewhere on these forums. Really, if you want pretty much zero functionality from the watch, you can stop here.
You may not have the "stock ROM" loaded on this watch. Fortunately, these are still easy to find. You want the BTU version if you are in the United States.
This step is important, because even if you do not NEED to do this, knowing how to do this may help you recover from a "soft brick", and get back on track.
Put the watch into Download Mode.
To do this, hold the power button until the "Rebooting" menu appears.
Now, press the power button several times (4 or more)
A new menu appears, use the power button to move down to "Download"
Hold power button for 3 seconds, then release it
Download mode will appear
Connect the USB to your PC, then the cradle, then add the watch to the cradle
Open Odin
Leave everything as normal, and click on "AP"
Select the V700XXUAMK7 file/image
Run the process
This should get you the stock firmware rom loaded.
Here are some problems you may encounter during this phase:
When you connect the watch to the cradle, sometimes it shuts off or does something unintended. Make sure the cradle and usb are connected to the PC *before* trying to add the watch, rather than trying to plug the USB into the cradle once the watch is attached.
Odin may not "see" the watch as a device, or the installation process may not complete as desired.
MAKE SURE that Kies, Wondershare, ADB and all that other stuff is NOT RUNNING. By not running, I mean ctrl+alt+del and go to task manager in Windows and kill ALL instances of them, especially Wondershare. Do this before you think you got a bad image or something. This particular step gave me a headache for a while.
The watch should be booted with the regular firmware now. You may need to do that pressing trick on the main screen again to get it to do much else.
For installing the custom recovery ROM (this is NOT the custom ROM, but is needed and recommended to install null on your watch), you follow almost the same exact procedure as before.
EXCEPT,
1.) UNCLICK in the options for Odin "Auto Reboot"
2.) When you get to the part where you add the V700XXUAMK7 image file, instead, when you click "AP", add the Null TWRP file you downloaded previously.
After a successful install ,the watch will still be on the "downloading" screen. It is safe to restart it now, however, and you can hold the power button down and then press it a few times during the "Rebooting" phase to change to recovery mode.
If you did this right, after a brief Samsung Logo, you will see the Null TWRP screen which has several nice options on there for you.
Now, what you should do, since you know that it worked, is you need to ROOT THE DEVICE.
Don't worry about no Impactor stuff or any of that crap. If you're like me, it will not work. Don't worry about ADB or any of that either.
Use your free trial of Wondershare (or your alternative method), and add the SuperSU ZIP file to the ROOT DIRECTORY of your SD card. With Wondershare, you do this by opening Wondershare, and then connecting the device via USB. Remember what I say, put USB to PC, then to cradle, then add the watch.
Why come your Wondershare no see the watch? Make sure you did the trick on the home screen (pressing the stupid box a thousand times) to get into the Settings and enable Developer mode (keep clicking the version) and USB Debugging.
DO NOT BOOT THE WATCH INTO DOWNLOAD MODE! What are you doing?! Just open the watch up and run it regular so you can see the time, make sure USB Debugging mode is turned on, and Wondershare should see the watch. Still having problems? Try for install those drivers I linked at the top for Samsung devices. You may not need to do this.
You are STILL having problems?! Make sure no other process similar is running. No Odin. No ADB. No Kies. No Impactor. Nadda! Ctrl+alt+del and get rid of all those type processes. Then try it again.
Now, to finish the root.
Once the file is transfer over, disconnect the watch again, and reboot into recovery mode.
Go to install and select that SuperSU zip file, it will install right from the zip.
As an extra added measure, go down into the advanced options of TWRP, the recovery mode, and press on the "fix permissions". I don't know, maybe this does not help, but it does not hurt it either.
Restart the watch regular, run the SuperSU program from the "apps" section, and everything should look fine, and your watch is now rooted.
Power back down and go into recover mode again.
NOW, important! Go to TWRP again and go to BACKUP. Create a backup.
This backup is useful from this point so you can recover a fully working stock version that is rooted, because the next step may cause you a lot of frustration.
DO NOT GO TO SOURCEFORGE!!! F0mey has a page on there for the NULL ROM, and it is not even for the same device! It has version all the way to 27. It doesn't matter if you download the oldest version on there is almost 1GB and it is NOT THE CORRECT THING FOR THIS WATCH.
Do not waste your time! I kept flashing all kinds of bogus stuff on my watch trying to get it to work. Some other guy has a Galactus Mod. Don't bother! It will not work!
If you're sitting there trying to install some bogus ROM, and getting stuck in reboot mode and everything, just use that recovery you made and then come back to this thread when you have some sense in your head.
Go back to the top and get the REAL Null Rom 23. This is a mirror somebody found hosted by Kent. it is only about 300MB, not no 900MB file like the stuff on F0mey Sourceforge page.
How to install it?
Well, the same way you moved that SuperSU file over to the SD card with Wondershare, what you can do, is move the null rom over to the SD card using Wondershare. Just move the ZIP, same way as with the SuperSU. Do not open it! Once it is on the watch, this is the easy part, go into the recovery mode again, go to install, and install it.
You'll know it is correct because on the very first screen, it will say the device it is made for before it installs. The other roms say i398 or something, which is NOT THIS WATCH.
It will have all kinds of options you can tap on with your grubby finger. The recommended settings are fine, you may want to tick some of the Google stuff, like the Play Store.
Anyhow, now the whole thing will take a few minutes to install/flash onto your device.
When it starts to boot up, what is this?! It gets stuck in a loop! Galaxy logo, over and over!
No!!! After so much work! This can't be happening!!
Don't worry, this sound stupid, but just connect the watch to the cradle with the USB connected to the PC. Don't do anything else. For some reason, now it will work and boot fine and you'll be able to unplug it later and do what you like with it.
You will have to do the trick of rubbing the main screen again, with the orange and black box. Sorry, it takes forever, I know. Don't give up. Once you are done, you can connect it with your phone or whatever device.
Make sure to turn on Bluetooth on your phone, and you should be able to see the device (if not play with the bluetooth settings on the watch). Pair the devices, which requires tapping something on both screens.
Most likely, your phone also has an option under "hotspots and tethering" to allow bluetooth sharing of the internet with the watch. Once you enable that, go to the watch, and go to the bluetooth settings where the phone is connected to it, there is options in there for internet sharing with the device over bluetooth (just enable it, it is an on/off toggle).
What did I forget? This is only version 0.01 of this tutorial for you. If you need some more advices, you can write me. I may not check often, but that is life. You can find my email probably from my profile, also.

Dude..... I love you !!!! I thought id never see the gear null rom ever again. Thx bro

Awesome write up made my watch very happy!!

Thanks for all that,

Help
Good post, i have a question, this only work in android 4.3? i have 6.0 and the gear say error connection, thanks and sorry for the bad english

the recovery mode text is so small i cant read it. its stuck at the top portion of the screen. any help? i feel like i wasted money buying this. there is zero support here.

Thank you for this! This is very helpful!
Bad news, though... The Null 23 link isn't being hosted again. Anyone know a valid link to the VALID Null 23 rom?

I need the Null_23.zip too!
tamcswain said:
Thank you for this! This is very helpful!
Bad news, though... The Null 23 link isn't being hosted again. Anyone know a valid link to the VALID Null 23 rom?
Click to expand...
Click to collapse
I have same situation!! That link is not working anymore so i'm waiting the Null_23.zip custom rom for Galaxy Gear 1 which i got it 2 days ago!
Anyone have the Null_23.zip Samsung galaxy Gear's custom rom for share it to us?

Jc Lee said:
I have same situation!! That link is not working anymore so i'm waiting the Null_23.zip custom rom for Galaxy Gear 1 which i got it 2 days ago!
Anyone have the Null_23.zip Samsung galaxy Gear's custom rom for share it to us?
Click to expand...
Click to collapse
If you find something, let me know! I will do the same. I message fOmey (the Null 23 rom creator) and he confirmed he doesn't have it anymore or any links. I also asked to confirm the Null 23 roms on sourceforge.net are incorrect since they are almost 1gb in size and states in the rom installation "i9300" which is the galaxy s III phone.

https://drive.google.com/drive/folders/0B_ka0GfEx6wOMmVfb2tQblJmTmc?usp=sharing

KcajBoy said:
I spent several DAYS getting this watch to work properly (and by properly, I mean rooted and with a new mod).
...
Because I am a new user and can't submit links, this next part is going to SUCK for you:.
Click to expand...
Click to collapse
My gen 1 still works on null 23, but I got a nostalgic kick out of reading your write up. Nice job. Took me back to some good - although often frustrating - days. F0mey did nice to infuse new life back into this classic.
I came to see if anything better was out here since I last visited a good while ago; but not really. Maybe it's time to finally buy something new, and retire this one to a time capsule. (Next to the Casio calculator, $1 g-shock, nelsonic pacman/frogger, stainless mickey mouse, blue gobot/transformer, and gray fighter jet. I wish. Those didn't survive.)

Gear 1 won't connect with Samsung S8
I don't know if I am in the right place but I try and hope you wil tell if I am or not.
My watch Gear 1 always worked with my Samsung S7Edge. No problems. Now I have a Samsung S8 and it won't connect. My Sansung S8 finds my Gear1, but when I have to confirm on my Gear1 it tells me to reset the Gear 1 to its factory settings. It resets, but only starts and I cannot confirm anywhere the number that appeared on the phone. Somebody can help me?
Thanks in advance.

Only acknowledge on phone not on watch
Idebutterpiep said:
I don't know if I am in the right place but I try and hope you wil tell if I am or not.
My watch Gear 1 always worked with my Samsung S7Edge. No problems. Now I have a Samsung S8 and it won't connect. My Sansung S8 finds my Gear1, but when I have to confirm on my Gear1 it tells me to reset the Gear 1 to its factory settings. It resets, but only starts and I cannot confirm anywhere the number that appeared on the phone. Somebody can help me?
Thanks in advance.
Click to expand...
Click to collapse
You just have to acknowledge on the phone not on the watch. Just had that issue with an old S3

Battery life is terrible in null did that last year and went back to tizen
Sent from my SM-G950F using Tapatalk

A very Simple Trick - access debug mode without phone
Great guide, feels like im getting somewhere now. Slightly easier way of accessing Samsung Gear without pairing with another phone is to- On the install Samsung Gear screen(on your watch) try tapping 10-15 times on the white gear watch picture on the top left. This will bring up some message at the bottom about 'bluetooth 3 second press' whereafter you long press for 3 seconds on same picture. Watch is unlocked much easier than 'making love' and swiping up and down to get into settings haha
One question though. After installing stock rom should my software version not change in gear information settings?It seems that I am having trouble with 100% correct drivers because wondershare cant connect to my device, although it shows up in my file explorer is official latest samsung drivers fine or should i download fastboot drivers?. (any reliable links to stock rom,recovery,usb drivers and custom rom would be greatly appreciated,feels like im having trouble with the correct zip files)

I had a hard time getting all the files together so I have made a zip up and it has every file you need,even the firmware V700XXUAMK7,I added that cos on the Samsung Firmware website on slow download it took me 2 hours to download it and it like only 411 mb.
Super SU v2.85 in it there and works fine ,use Impactor_0.9.14,run Impactor.exe and click start and wait for it to finish then connect using Wondershare MobileGo and install the supersu-2-82.apk,Google play on Wondershare MobileGo don't work cos it can't find the device cos Google Play is not on the Gear 1 ,click on supersu app on the Gear 1 and it will ask you to update root files,just click on normal and it will update it and done,you have root on Gear1 now..
Here is the files in a zip.. Hope this helps sommeone,it would of helped me.. its on Mega.. here https://mega.nz/#!sAxinCDa!GR47wt4cQ6g74Ya_9An0bfmf2mel1o8dV0sNiqK3A6M

spannernick said:
I had a hard time getting all the files together so I have made a zip up and it has every file you need,even the firmware V700XXUAMK7,I added that cos on the Samsung Firmware website on slow download it took me 2 hours to download it and it like only 411 mb.
Super SU v2.85 in it there and works fine ,use Impactor_0.9.14,run Impactor.exe and click start and wait for it to finish then connect using Wondershare MobileGo and install the supersu-2-82.apk,Google play on Wondershare MobileGo don't work cos it can't find the device cos Google Play is not on the Gear 1 ,click on supersu app on the Gear 1 and it will ask you to update root files,just click on normal and it will update it and done,you have root on Gear1 now..
Here is the files in a zip.. Hope this helps sommeone,it would of helped me.. its on Mega.. here https://mega.nz/#!sAxinCDa!GR47wt4cQ6g74Ya_9An0bfmf2mel1o8dV0sNiqK3A6M
Click to expand...
Click to collapse
Is not available anymore