Gents
when i try to answer an SMS via SVOICE, i can't say something. it shows me my "answer" like this:
+41 (<- prefix switzerland)
Milliarden
12345 (<- phonenumber without zero)
Milliarden and 12345 is the actual answer. it seems like gear have real issues there.
on the other hand, i am able to send SMS directly via SVOICE, it only generates this problem if i hit ANSWER WITH SVOICE
anyone has any idea how to solve??
i'm running AUT (<- Switzerland) MK7, stock, rooted.
Note 2 with pre rooted 4.3, N3 project features
Language: German
Hope you could provide help.. this really sucks
here's a picture of it..
1) i receive an normal sms notifcation
2) i select answer with svoice
3) than without any voice input, i directly get this picture.
4) i cannot change the phonenumber anymore, it stays on "+41" and therefore totally useless. The "Milliarden" is also right there out of the box, i really dont get this haha
-> sending new sms (also to same contacts) directly with svoice works flawlessly!
Related
Hi all,
After I did the ROM upgrade to the official HTC WM6, everything works fine, well apart from the GPS, which I never managed to get it working and the icon that I should get when I have a voicemail. Now I get a text message with this "[email protected]" characters? Any ideas.
Thanks in advance.
Alonso
I got the same problem..
the mobile however should still be able to recognize it as a voice mail message. You just get an extra messages in your SMS messages folder
A kludge that works for me:
create a contact with the mobile number of "[email protected]" (just save it to your contacts) with a name like "Voice mail Notification"
install wm6_threader (find on this forum) and it will create a thread per contact!!
works better than original.. why? cause you have history similar to
incoming calls
outgoing calls
missed calls
but for SMS.
In Canada at Rogers Wireless we get additional SMS messages for missed calls when our mobiles are off.
I called it "Operator Notifications"
I also use it for SMS sent from Microsoft, Google and Yahoo. One per website.
The attached cab fixed it for me a while ago.
Not sure whether you need to install the sdkcerts before or not, so I include them just in case.
Reboot after installing.
The voicemail fix is included within rabdo's 1.6 cab for Orange UK network setup. (Also includes the necessary certs).
If you are on Orange UK, I recommend that (I use it with every flash....)
I got my Diamond last Thursday and have been using it with my secondary sim whilst I got used to the phone and became used to using it intuitively... I am happy to say I am now completely comfortable with it and it is *almost* perfect!
Changes:
*Bepe 0.97 FIXED
*Diamond Advance Config tool
*S2U2
*Comm Manager advance.
Thank you to all the great people working to made this device all it should be! Donations forthcoming very soon!
I have just a few questions with regard to my remaining issues:
*The contacts summary page which comes up after ending a call, any way to suppress that?
*Is there any way to bluetooth contacts, files (pictures/music etc) to and from another mobile phone? I tried transferring a jpg image, an MP3 ringtone and a contact via bluetooth from a Sony Ericsson W880i but all three failed!
*Is there any way to display contacts as FORENAME SURNAME as opposed to SURNAME, FORENAME?
Thank you in advance for any advice regarding the above
Anyone?????
Think I might be able to help you out there.
1. To get rid of that contacts thing at the end of a call, tap Phone on the Home screen, then tap Menu and then Options. Go to the Advanced tab right at the end and untick "Add new phone number to Contacts at end of call".
2. To receive files of any kind over bluetooth, you have to have Bluetooth turned on in the Comm Manager, but you also need to have the Beam option turned on. If you have the modified Comm manager then you should be able to see the Beam option in there.
3. All my contacts show up as "forename surname" already, I think it might be to do with how you have it set up in Outlook, because I remember Outlook had it "surname, forename" by default and that drove me mad until I changed it. Hunt around in Outlook to change the way they're displayed, then do a sync, and I'd say that should do it.
Dave
Thanks for taking the time to reply Dave!
The contact summary still seems to come up I did untick this box a few days ago and maybe its a bug but the screen still appears on finishing a call.
I turned on Beam and the bluetooth file transfer now works just fine, thank you!
I will sync up when I get home and have a play around with Outlook, thanks for the suggestion I think that will remedy this problem too.
Is there an advanced contact manager or SMS manager out there by chance? Sending and receiving a few SMS today and the whole transition from TF3d to the WM is a bit jarry, and browsing contacts isnt really possible without the stylus... so far these are the only small niggles in day to day use! The latest version of S2U2 really helps usability and allows you to lock the hardware buttons when you get an incoming call... no more calls answered by mistake with this app!
No bother.
I never manually browse the contacts list because it scrolls very strangely, its impossible to successfully pick a contact.
The best way to select a contact when sending a text, I've found, is to type the first letter or two of their name, eg "DA" and then everyone with a name starting with DA is listed, eg DAD, DAVE etc. Much better than scrolling a list. Its the same behaviour when making a call and you want to select a contact; just bring up the Phone app (the one with the keypad) and start typing their name on the number pad.
I agree though that the process of moving from TF3D to WM6 when sending a text is very clunky. I wonder would HTC consider developing their own TouchFlo messaging software that covers all aspects of sending SMS and email. Unfortunately the iPhone still has the advantage there; you still have to get out the stylus every now and then on the Diamond.
I have most of my most frequently used numbers under the People tab in TF3D... good suggestions as above though.
May give this a try if I cant get along with the SMS...
http://store.xda-developers.com/xproduct.php?xProd=1943
Will have a search to see user opinions
Phone: AT&T Tilt
ROM: Garmin DK3.1 Final D3D (and included radio)
HardSPL: 3.28
I have been trying to send a contact to my friends phone, but have had no success.
1) Bluetooth on.
2) Open contacts.
3) Select the contact I want to send.
4) Select Send Contact
5) Select Beam
Following this, my contacts list closes briefly and the BT device search appears for about 0.5 seconds then switches back to the contacts list and nothing seems to have happened. My friends phone (yes, the BT is on and IS VISIBLE) does not receive the "beam," of course because I wasn't able to tell the "beam" where to go.
Anyone have any ideas or suggestions for fixing this?
Thanks,
Zack
its quite possible that your friends device is unable to receive "outlook" contacts. try storing a number to your sim instead and sending that, at least then you can prove this.
Hello,
I'll start with the tech specs.
I have a Samsung Galaxy S i9000
Android 2.2 (Froyo)
Russian language support for the Android OS
I have tried several keyboards with cyrillic / Russian. All of the text appears perfectly in my screen.
However when I want to send a text message in Russian, the system will tell me that the text might be corrupted on the recipient device.
It then offers me a dialog box to change input to automatic formatting, where I can choose 'send' (and it will change the formatting, basically sending only a bunch of '?') or 'cancel' and it won't send.
I have gone through all sorts of settings, but I can't find anything to send a message without the phone complaining.
Does anyone have an idea how I can fix this?
(By the way, I had the same problem with Android 2.1 (Eclair))
Did you change the settings in the SMS stock app? You should chose "Automatic" there in the first place. Otherwise you'll send a bunch of "?" just you said.
Try another SMS app. t. ex. chompSMS or Handcent SMS.
What keyboard are you using? Try Smart Keyboard, you can find it at 4pda.
I'm using by myself russian Swype for now, but I've been testing both Smart Keyboard and SlideIT. Both have been working just fine. And my mesages came through without any trouble.
Good luck
Удачи!
Hi, I got an error from my gear's S-voice today when trying to reply an SMS.
The S-voice was unable to reply a message, it will reply "i'm unable to send the message", and on the phone, it will show "failed to send".
However, when sending a new SMS (i.e. not replying through the notification), it was able to work.
Has anyone encountered this problem?
derrick213 said:
Hi, I got an error from my gear's S-voice today when trying to reply an SMS.
The S-voice was unable to reply a message, it will reply "i'm unable to send the message", and on the phone, it will show "failed to send".
However, when sending a new SMS (i.e. not replying through the notification), it was able to work.
Has anyone encountered this problem?
Click to expand...
Click to collapse
I get this also. If you check the SMS message it will most likely have an incorrect country code. Mine should be +44 however it shows as 44 and I get a network failure.
mintie said:
I get this also. If you check the SMS message it will most likely have an incorrect country code. Mine should be +44 however it shows as 44 and I get a network failure.
Click to expand...
Click to collapse
I checked and the country code is wrong too. Did not have the "+" symbol. Guess that's a bug then...
same here, works with new sms, does not work with answering to sms
Hi,
I Have the same trouble. Any solution??
Gear with Null 12.
Stéph.
Check the format of the number in your contacts. I posted about this week's ago: numbers with parentheses don't work.
Edit: someone replied that + doesn't work either. Bummer.
http://forum.xda-developers.com/showthread.php?p=47270374
Sent from my SCH-I545 using Tapatalk 2
Hi,
No more solution for this big Problem???
Thanks
Stéph;
HCPASS said:
Hi,
No more solution for this big Problem???
Thanks
Stéph;
Click to expand...
Click to collapse
I have exactly the same problem, I live in Germany and when I reply through:
- pre-made SMS: OK (it is sent to 00 49 1xxxxxxxx)
- through S VOICE: *does not work* "Unable to send SMS" (it is sent to 49 1 0000 xxxxxxxx --> WRONG Number)
I do not understand how a big company as Samsung fails to make that work...
PS: do you receive WhatsApp or Viber notifications on your Galaxy??? I get none from Whatsapp and Viber...
Doesn't know also why Samsung doesn't do anything??
Sorry but i don't use WhatsApp or Viber.
Stéph.
same here (switzerland)
this is what it look like, if i try to answer a message (i'm not even able to dictate text).
Create new one works flawlessly.
i alreay wrote to samsung support, but i dont expect that they will take this seriously and inform their devs..