Hello,
I purchased a second hand phone and did not know that it was korean galaxy Note, ,
After trying to flash PhilZ-cwm6 recovery I hard Bricked my Phone. it won't charge, it won't turn on, No Recovery, No Download mode. Since I am in India, Samsung does not repair my Korean Phone, Is there any hope for this device??
Please Please Please Heeelp...
mchauhan said:
Hello,
I purchased a second hand phone and did not know that it was korean galaxy Note, ,
After trying to flash PhilZ-cwm6 recovery I hard Bricked my Phone. it won't charge, it won't turn on, No Recovery, No Download mode. Since I am in India, Samsung does not repair my Korean Phone, Is there any hope for this device??
Please Please Please Heeelp...
Click to expand...
Click to collapse
there must be lot of local technicians in your locality, try them, negotiate pricing.
You should try harder to get into download mode some how.. I have seen people flashing S2 rom on N7000 and regenerating.
Try this thing.
Azeazezar said:
Try this thing.
Click to expand...
Click to collapse
Thanks, But My Phone is Dead Bricked so I am not sure if USB JIG can help me.
I have seen a video on youtube from MobileTechVideos and my Phone is in same condition.
http://www.youtube.com/watch?v=d0SX3iDuIZc
But I am not sure If any body in my Town does that.
Does your PC detect your phone???
Related
Hi all,
When re-flash the original ROM of my tab, follow link:
http://forum.xda-developers.com/showthread.php?t=967175
I don't read careful enough, I flash with Heimdall in Ubuntu, include boot.bin file (--primary-boot boot.bin). When success flash, my tab not run again. My battery is full (when began flash) but my tab not run, no live signal: no light, no signal to PC over cable.
What can I do? Should I take the my tab to producer for re-load bootloader?
Thank all.
If the flash went through fine then flashing a primary bootloader is fine as long as the bootloader is for your particular device. However my guess is that in this case the boot.bin you flashed was not designed for your particular tablet.
You can try a custom jig (search the forums), although I don't know if it will work with a busted primary bootloader. Otherwise you'll need to take the tablet back to Samsung and they'll fix it for you.
Benjamin Dobell said:
If the flash went through fine then flashing a primary bootloader is fine as long as the bootloader is for your particular device. However my guess is that in this case the boot.bin you flashed was not designed for your particular tablet.
You can try a custom jig (search the forums), although I don't know if it will work with a busted primary bootloader. Otherwise you'll need to take the tablet back to Samsung and they'll fix it for you.
Click to expand...
Click to collapse
Thank you.
Finish flash, Heimdall notify is success and auto re-boot my tab. But tab shutdown and .... die.
I was search by key "custom jig" and found some solutions, I will try tonight.
Thank you again.
Hello every body.
I have been tested all solution about baterry (included shock baterry), and my baterry is ok. But my tab still dead.
Hello everybody,
My tab can return to download mode now, repair by RIFF JTAG box.
Thank all.
I'm in the same situation. Battery ran out during Odin process. Now it won't acknowledge the Tab when plugged in. I've put it on charge but still nothing.
I am having the same problem, but my tab died in the middle of an odin, failed and now will not turn on. Can someone help me get it going again?
Hi,
Please PM me if you need help with this as I have the necessary tools and skill to revive hard bricked devices and can definitely JTAG any of the TAB variants and work with HTC and Galaxy Phones daily in terms of reviving hard bricks.
hard brick
Hi
after unsuccessful attempt to flash a ROM on my Samsung Galaxy Tab
there is no response from thedevice. It's completely dead. Can you fix
bootloader? Will I have to post the device? Im in UK
brgrds
Tim
Samsung Galaxy Tab (Sprint CDMA) full brick
Hi connexion2005
after unsuccessful attempt to flash a ROM on my Samsung Galaxy Tab
there is no response from thedevice. It's completely dead. Can you fix
bootloader? Will I have to post the device? Im in UK
brgrds
Tim
Hi Tim,
I've responded to your PM as well but I can fix your issue with my JTAG solution. Posting from the UK and getting back to you is no problem at all.
-Josh
i tried to downgrade my Samsung galaxy s i9000 with this guide:
theandroidsoul.com/ezbase-ezrom-for-android-2-2-install-revert-back/ (copy & paste in the address bar)
but in the middle of the flashing the ezodin just stopped and got stuck (during the file "factoryfs.rfs")
so i have waited something like an hour and a half but it didn't help so i did what my friends told me and shot-off my SGS then when i tried to power it on again it just stayed like it's off- black screen, wont light, wont go either to download or recovery mod
what should i do!?!?!? even when i eject the battery it won't turn on!!
please help me !!! im clueless and my dad will kill me if i'll tell him
please help me!!! im sorry that i kinda spamming this thread nut i must figure it out
Read this thread. Maybe it might help.
yea its bricked too bad.. but dont worry try usb jig(search it here in xda)..i'm sure ur problem will b solved
hard brick
Hello
it looks like you r hard bricked.
your bootloader is toust.
you still can fix it with riff jtag.
look it up
hope it helps.
I also bricked my captivate.
hi mike i'm from israel too[= do u know any store that sells that "jig" thing?
xpboy7 said:
hi mike i'm from israel too[= do u know any store that sells that "jig" thing?
Click to expand...
Click to collapse
you can get it on amazon or they are very easy to make with basic soldering skills
Hi guys!
You are the only one that could help me....
A friend of mine has a G Note N7000 (white) and he wants to selll it...but....
He said that is bricked (not starting) after he tried to downgrade it from ICS to Android 2 Gingerbread....
is this gone for ever? it can be unbricked?
thank you!
please help me....i want this phone.....
Well there is alot of info about bricked notes so I advice you to do some xda searching as there are several ways to revive a bricked note. Use the search function and you'll find what you need. I would advice you to check Dr.Ketan's signature for some helpfull links. Ask your friend if he did a FULL WIPE when reverting from ICS to GB,that could be the 'source' of the brick.
So, we cause a triple murder before breakfast, start a race war before dinner - that's uh, that's a pretty good day.
my friend told me that when he tried to downgrade it, the bootloader was broken....
christty31 said:
my friend told me that when he tried to downgrade it, the bootloader was broken....
Click to expand...
Click to collapse
As him if he could boot into download mode...
If yes,there are more chances of reviving it.
Sent from my GT-N7000 using xda app-developers app
i have asked him about ....
he said that the guy who downgraded his phone did a full wipe....
any chance to revive it?
please help.....
christty31 said:
i have asked him about ....
he said that the guy who downgraded his phone did a full wipe....
any chance to revive it?
please help.....
Click to expand...
Click to collapse
well it depends... if he downgraded to GB and then wiped... it should be ok.. if on ICS and was on a safe kernel and wiped .. should be ok...
u need to get more info from him as to what exactly is the problem...
does the phone switch on...
is the download mode on the phone accessible
is the pc recognizing the phone when connected thru odin
he said that the phone is not switching on after full wipe....
ok the phone doesnot on...
but does it have access to download mode ? it is different from normally switching on (vol dwm+pwr+home)
latest news....
i took my Note to a service and they said that the phone is connecting to JTAG software, all is good, but cannot write (or something)....
what i wrong?
christty31 said:
latest news....
i took my Note to a service and they said that the phone is connecting to JTAG software, all is good, but cannot write (or something)....
what i wrong?
Click to expand...
Click to collapse
How come your friends note turned into YOUR(my) note?
Sent from my Galaxy Nexus using Tapatalk 2
irelevant....
i want the phone from him and borrowed to do some research if it can be done....
Hello Experts,
I am a bit hesitant to post this. But I searched the forum and internet, but couldn't find an answer. Please help if you can.
I have a Samsung Galaxy S Advance - I9070P model. I had android 2.3.6 and I tried to upgrade to 4.1.2 using ODIN. It loaded successfully. But My phone is not turning on. Not even the yellow exclamatory Icon. It is just as good as brick. May i call it as a hard brick?
If yes, will a USB JIG help on a hard brick? Or does it help only on a soft brick.
kranthikumarb said:
Hello Experts,
I am a bit hesitant to post this. But I searched the forum and internet, but couldn't find an answer. Please help if you can.
I have a Samsung Galaxy S Advance - I9070P model. I had android 2.3.6 and I tried to upgrade to 4.1.2 using ODIN. It loaded successfully. But My phone is not turning on. Not even the yellow exclamatory Icon. It is just as good as brick. May i call it as a hard brick?
If yes, will a USB JIG help on a hard brick? Or does it help only on a soft brick.
Click to expand...
Click to collapse
If you installed I9070 JB on your I9070P phone - it could be a hard brick.
You can try with USB JIG.
shut_down said:
If you installed I9070 JB on your I9070P phone - it could be a hard brick.
You can try with USB JIG.
Click to expand...
Click to collapse
Yes I must have did that. I9070 JB on I9070P. I just ordered a jig online. I hope that sets my device into download mode.
I was worried, one of the mobiletechvideos on youtube showed sometimes a hard brick cant be fixed with a JIG. They showed a complex way (using some cables, JTAG... some techy stuff) to fix it. That was the reason for my post.
Thanks for your prompt reply. I will update this post after my experiment.
Flashing I9070 firmware on P version could not completely brick it. I once flashed I9100 firmware on my friends I9100G and i got it back by putting it into download mode and flashing G firmware with odin. I think the screen wasnt even turned on, try to put it into download mode and if it vibrates and odin sees it, you can restore it.
Unfortunately. Even with Usb jig, my phone is not turning. Now I doubt if it has anything to do with battery. I am not sure if myphone's batttry is charging when I put it to charger
kranthikumarb said:
Unfortunately. Even with Usb jig, my phone is not turning. Now I doubt if it has anything to do with battery. I am not sure if myphone's batttry is charging when I put it to charger
Click to expand...
Click to collapse
Take it to service. If you flashed P firmware over non P phone - it is hard brick.
Sent from my GT-I9070 using Tapatalk
I took it to service and they suggested, motherboard should be replaced. $ 100.
kranthikumarb said:
I took it to service and they suggested, motherboard should be replaced. $ 100.
Click to expand...
Click to collapse
I have also gt-i9070, also hard bricked, usb jig also was useless. Any solution?
generic boot
kranthikumarb said:
I took it to service and they suggested, motherboard should be replaced. $ 100.
Click to expand...
Click to collapse
Tee Eff said:
I have also gt-i9070, also hard bricked, usb jig also was useless. Any solution?
Click to expand...
Click to collapse
Maybe some expert can experiment writing a generic boot code for Samsung galaxy to boot from external sd card so that odin can detect the bricked phone. like booting a PC from bootable CD of Floppy and then can flash the phone
Tee Eff said:
I have also gt-i9070, also hard bricked, usb jig also was useless. Any solution?
Click to expand...
Click to collapse
Sorry but when you can´t get into recovery mode via Jig or keys you are still in big trouble...
there is just one opportunity for you...when you are able to flash a new bootloader via riffbox and on your pc (telnet) you can bring your phone back to life...this is a heavy method,but also a possibility!
:good:
Edit: I forget to say one thing regarding the Jig, before buying or building one!
The Jig is just the same way how the key combination keys on your device. It´s only because of another voltage on your accumulator,which leads to enter the recovery mode. (CWM/TWRP/STOCK)!
Happymaker said:
Sorry but when you can´t get into recovery mode via Jig or keys you are still in big trouble...
there is just one opportunity for you...when you are able to flash a new bootloader via riffbox and on your pc (telnet) you can bring your phone back to life...this is a heavy method,but also a possibility!
:good:
Edit: I forget to say one thing regarding the Jig, before buying or building one!
The Jig is just the same way how the key combination keys on your device. It´s only because of another voltage on your accumulator,which leads to enter the recovery mode. (CWM/TWRP/STOCK)!
Click to expand...
Click to collapse
I know it is hard bricked, I read a lot before making my post, can be un-bricked by jtag/riftbox, but it is expensive for such old phone, maybe good for some sd card booting experiments in case it is possible and if some expert can write a boot software.
kranthikumarb said:
Hello Experts,
I am a bit hesitant to post this. But I searched the forum and internet, but couldn't find an answer. Please help if you can.
I have a Samsung Galaxy S Advance - I9070P model. I had android 2.3.6 and I tried to upgrade to 4.1.2 using ODIN. It loaded successfully. But My phone is not turning on. Not even the yellow exclamatory Icon. It is just as good as brick. May i call it as a hard brick?
If yes, will a USB JIG help on a hard brick? Or does it help only on a soft brick.
Click to expand...
Click to collapse
I have the same problem
Is there any solution?
Help! I installed the wrong custom rom on my phone, I installed the s5830i icedroid rom on my s5830, curiously thinking it might go into a boot loop at worst but I was horribly wrong. As soon as I pressed reboot now on cwm my phone blacked out and never lighted on again. I can get it in download mode, it shows in Odin but it gets stuck in setup connection. Is there a software or something to revive the phone, I can't hand it in to samsung cause I purchased it off ebay and they want a receipt which the original owner doesn't have, or should I try a jig. What do you think guys? This phone is nearly brand new and don't want it going to waste.
Stevo001457 said:
Help! I installed the wrong custom rom on my phone, I installed the s5830i icedroid rom on my s5830, curiously thinking it might go into a boot loop at worst but I was horribly wrong. As soon as I pressed reboot now on cwm my phone blacked out and never lighted on again. I can get it in download mode, it shows in Odin but it gets stuck in setup connection. Is there a software or something to revive the phone, I can't hand it in to samsung cause I purchased it off ebay and they want a receipt which the original owner doesn't have, or should I try a jig. What do you think guys? This phone is nearly brand new and don't want it going to waste.
Click to expand...
Click to collapse
i think buddy you should use usb jig
Usb jig wont help... Nothing will help the only solution to this problem is jtagging....
Well samsung took my phone in luckily under warrenty so I should receive my phone back soon
Glad to hear that buddy. No more worries