Hey guys, I'm in need of some help....
I was flashing an update to my ROM on my unlocked HTC One using CWM touch recovery. The aroma update process appeared to complete correctly and i rebooted the phone however, it failed to get past the bootloader screen trying to boot the rom. When it bootlooped back into recovery I discovered I have a pretty major problem, the bootloader attempted to boot into recovery, flashed up the CWM recovery screen, but then that bootlooped too. I can reboot into HBOOT/fastboot but nothing else. I have tried fastboot flash recovery to TWRP and CWM but they are still flashing up and then rebooting. Any ideas on what I can do to dry and rectify this? I don't really fancy a £600 paperweight a couple of weeks after getting it...
Cheers
Hi
Yesterday I flashed a new rom on my htc one, when it was done and tried to reboot it kept getting stuck when booting, and even if I tried getting into recovery it didn't work. With adb i then put another recovery on my phone but i kept having the same problem... I see the begin of the logo from the recovery ( CWM and the same with TWRP) but then it just reboots again.
Can someboy please tell me what to do? can i flash another rom without recovery ? of what are my options?
Thanks in avance
Can you run fastboot erase cache after flashing recovery, and try again?
Would help to know more than vague terms of rom install..
Okay, I have an Atrix HD that I have rooted and unlocked the bootloader and I have been running the SlimKat ROM with little to no problems and Philz Touch recovery for about a week until yesterday when my phone reset itself and started to boot loop. They only other thing I had flashed was a new logo to get rid of that stupid unlocked bootloader warning. I am fairly savvy when it comes to rooting and flashing roms because I have done this for years with various Samsung devices but the Motorola is a little new to me with having Fastboot.
Let me tell you what I have tried...
I first did a factory data reset in Philz and that did nothing.... then I tried to recover it back to my stock rom that I was running before using a nandroid backup that I had made with Philz Touch and same thing happened, it just sticks in boot loop. I then try to flash the PAC rom after I do a factory data reset and all the wipes I need to flash a new rom in Philz Touch to see if I can get a different rom to load and nothing happens but boot loop again.
Next I go to the forums to find answers and I start to set up my ADB on my computer... After I get ADB setup I first do fastboot -w to do a factory data reset through fastboot, download the stock Mexican rom and tried to flash all the components individually with ADB in fastboot the way skeevydude mentioned in one of his threads (sorry I can't remember which one) and I got a failed error "FAILED (remote failure)" when I tried to flash the system.img.
I then went to Mythtools v1.3 because I thought that I was doing something wrong with the ADB and fastboot... I put the stock Mexico retail rom into the firmware folder in Mythtools and tried to flash the stock firmware through Mythtools. Mythtoold froze when it rebooted the fastboot at 50 of 100%
Now I am at a loss, I have done everything that I know to try to fix this and I have searched everywhere for help and I need help. This is they only phone that I have because I just switched over to to a new carrier and just purchased this phone.
Any help would be appreciated!
UPDATE
I went into Philz Touch and formatted the /system so I could try and flash it again and now the phone boots straight to fastboot and Philz touch if I hold volume+ and power. I am going to download the stock mex retail rom and try and flash it through Philz touch.
UPDATE
I got an Error mounting /data when I tried to format the /data and when I tried to intall the Mexico retail rom I got a "set_perm: some changes failed E:Error in /storage/sdcard1/Atrix HD Mexico Retail 4.1.2.zip (Status 7) Installation aborted."
UPDATE
I formatted /data and /data media in Philz Touch and then it started mounting /data so I wiped and install PAC rom and it booted up just fine.
Stuck in TWRP Recovery after flashing "twrp-3.0.2-0-m7cdwg.img" by flashify.
Dear All,
I was in boot loop due to error of "com.htc.htcdialer" I was helpless to install twrp recovery every time i tried to install mobile gets reboot.
so i decided to keep "twrp-3.0.2-0-m7cdwg.img" in sd-card and flashed this file by flashify tool.
After flashing "twrp-3.0.2-0-m7cdwg.img" i cleared delvik cache(as somebody suggested to do this to get rid from boot loop which came due to "com.htc.htcdialer" ), and made backup of current rom now i am not able to go back to normal system start.
Here are some details of HTC ONE M7 (802d)
Android version= 4.4.2
It is "rooted unlocked" device not "factory unlocked".
Pl help thanks in advance
Hello Guys,
Yesterday I tried to root my Moto 2g.
Unlocked it's bootloader,Installed Twrp and installed supersu. Also downloaded a custom mod(the most famous one I guess) and installed it,only to find out that the phone would no longer boot
but keep looping on the unlocked bootloader warning screen.While thinking that I had downloaded a non-compatible mod I Installed another one.After that,booting the phone would Instantly
take me to the recovery mode and keep looping the Teamwin logo.
I decided not to mess anymore with it and reinstall the stock firmware for moto 2g. After Installing it the Motorola logo comes up and then I am taken to the fastboot screen once again with the error saying:
"Fastboot reason,Fell through from boot recovery mode".Tried to flash CWM to see If I could get into recovery mode from there but I would get CWM logo loops exactly the same way they appeared with Teamwin logo.
Seems like phone is dead to me but still have a bit of hope,although the only place I can get is fastboot.
Edit:I tried to fastboot flash boot boot.img the stock image and I got and error saying that boot.img(10mb) exceeded the partition limit
shatterbb said:
Hello Guys,
Yesterday I tried to root my Moto 2g.
Unlocked it's bootloader,Installed Twrp and installed supersu. Also downloaded a custom mod(the most famous one I guess) and installed it,only to find out that the phone would no longer boot
but keep looping on the unlocked bootloader warning screen.While thinking that I had downloaded a non-compatible mod I Installed another one.After that,booting the phone would Instantly
take me to the recovery mode and keep looping the Teamwin logo.
I decided not to mess anymore with it and reinstall the stock firmware for moto 2g. After Installing it the Motorola logo comes up and then I am taken to the fastboot screen once again with the error saying:
"Fastboot reason,Fell through from boot recovery mode".Tried to flash CWM to see If I could get into recovery mode from there but I would get CWM logo loops exactly the same way they appeared with Teamwin logo.
Seems like phone is dead to me but still have a bit of hope,although the only place I can get is fastboot.
Edit:I tried to fastboot flash boot boot.img the stock image and I got and error saying that boot.img(10mb) exceeded the partition limit
Click to expand...
Click to collapse
try flashing the whole Stock Firmware
It might help,
U said u flashed a MOD over stock ROM?
If so, u should have boot first Just After unlocking the bootloader before Flashing any MODs
raj_45 said:
try flashing the whole Stock Firmware
It might help,
U said u flashed a MOD over stock ROM?
If so, u should have boot first Just After unlocking the bootloader before Flashing any MODs
Click to expand...
Click to collapse
I did boot after unlocking and normally flashed whole stock firmware.This morning I woke up and the error message in fastboot is 'boot up failed' for bot normal and recovery mode
shatterbb said:
I did boot after unlocking and normally flashed whole stock firmware.This morning I woke up and the error message in fastboot is 'boot up failed' for bot normal and recovery mode
Click to expand...
Click to collapse
is this your problem
raj_45 said:
is this your problem
Click to expand...
Click to collapse
Ok let me explain the situation better.Last night I used a stock firmware I found and flashed it.When I tried to boot I would see motorola logo once
fore boot mode,Then it would go to recovery so I would see it for a second time and then I would see teamwin logo looping so the phone was not
able to get into recovery mode but only into bootloader.
After That I flashed CWM and the same thing would happen with CWM logo looping now in recovery mode.
Today I woke up and flashed CWM again,and for some reason I could get into CWM and use it normally
So what I did is Installed Supersu and a mod for my xt1068 and tried to boot but phone stuck in the same endless loop again and I also cant get
into CWM again as its logo keeps flashing instead of taking me into the menu.
I believe there is an error with my data folder or partition or w/e.
Most of all I want to be able to get into CWM again
shatterbb said:
Ok let me explain the situation better.Last night I used a stock firmware I found and flashed it.When I tried to boot I would see motorola logo once
fore boot mode,Then it would go to recovery so I would see it for a second time and then I would see teamwin logo looping so the phone was not
able to get into recovery mode but only into boot loader.
After That I flashed CWM and the same thing would happen with CWM logo looping now in recovery mode.
Today I woke up and flashed CWM again,and for some reason I could get into CWM and use it normally
So what I did is Installed Supersu and a mod for my xt1068 and tried to boot but phone stuck in the same endless loop again and I also cant get
into CWM again as its logo keeps flashing instead of taking me into the menu.
I believe there is an error with my data folder or partition or w/e.
Most of all I want to be able to get into CWM again
Click to expand...
Click to collapse
So u are not able to get into Recovery
And u can get to Fast boot Mode?
If yes Flash TWRP latest(3..1.0-0)
Boot into TWRP
Reset or Install any Custom ROM like LiniageOS or AOSP
I think it's the problem with SuperSU?
Which MOD did u install?
raj_45 said:
So u are not able to get into Recovery
And u can get to Fast boot Mode?
If yes Flash TWRP latest(3..1.0-0)
Boot into TWRP
Reset or Install any Custom ROM like LiniageOS or AOSP
I think it's the problem with SuperSU?
Which MOD did u install?
Click to expand...
Click to collapse
Thanks for the replies,I managed to solve the problem and install Cyanogenmod.I guess everything came up to this:
After the first time I installed twrp I decided to wipe my data folder but somehow it was deleted and the partition became raw type which caused
all the bootlooping problems.
Using CWM I was able to get into recovery mode and then I chose to format my data folder and sd card(as ext4 I guess) and the data folder was
recreated.
After that I normally flashed Cyanogenmod and device booted just fine