Hello. I'm going to install the new android into I9000. In the previous thread you recommend me the Semaphore kernel and Jelly Bean ROMs.
I installed the Semaphore from this topic: http://forum.xda-developers.com/showthread.php?t=1786220 by odin and I need to install zip file with my new ROM by clockworkmod recovery. I tried to install three types of ROMs: cyanogenmod10, c-rom, tsunami, however everyone shows 'error [path to file] (status 0) - installation aborted' when the installation starts.
What am I doing wrong?
przemek211 said:
Hello. I'm going to install the new android into I9000. In the previous thread you recommend me the Semaphore kernel and Jelly Bean ROMs.
I installed the Semaphore from this topic: http://forum.xda-developers.com/showthread.php?t=1786220 by odin and I need to install zip file with my new ROM by clockworkmod recovery. I tried to install three types of ROMs: cyanogenmod10, c-rom, tsunami, however everyone shows 'error [path to file] (status 0) - installation aborted' when the installation starts.
What am I doing wrong?
Click to expand...
Click to collapse
Status 0 is due to having wrong CWM on you phone, likely you are on ICS ROM and using JB kernel and trying to Flash JB ROM
thanks for your answer,
i'm using semaphore JB 2.3.0 Kernel (URL in first post) - the author writes:
This is a kernel based on the pawitp's one and it works for Android 4.1.1 JB ROMs.
This version works for Jelly Bean ROMs
Click to expand...
Click to collapse
I want to install this: [NIGHTLY][ROM][4.1.1] CyanogenMod 10
So could you recommend me other kernel + ROM? Why it happens if i have JB kernel and JB rom?
przemek211 said:
thanks for your answer,
i'm using semaphore JB 2.3.0 Kernel (URL in first post) - the author writes:
I want to install this: [NIGHTLY][ROM][4.1.1] CyanogenMod 10
So could you recommend me other kernel + ROM? Why it happens if i have JB kernel and JB rom?
Click to expand...
Click to collapse
Which date on nightly you trying to install
Sent from my GT-I9000 using xda premium
thanks for so fast answer
I tried the newest version 'experimental' (10/8) and next one "nightly" (10/3), but it looks that the problem are not in ROMs. I tried c-rom, tsunami and there is the same problem.
przemek211 said:
thanks for your answer,
i'm using semaphore JB 2.3.0 Kernel (URL in first post) - the author writes:
I want to install this: [NIGHTLY][ROM][4.1.1] CyanogenMod 10
So could you recommend me other kernel + ROM? Why it happens if i have JB kernel and JB rom?
Click to expand...
Click to collapse
yes kernel will work but CWM does not, so flash the ICS kernel to solve your problem , you are currently on ICS, so use ICS kernel and upgrade to JB, once in JB , use JB kernel
sorry, but i don't understand. i should install the ics kernel, e.g. from here: http://www.semaphore.gr/downloads/gt-i9000-ics and next i need to install JB kernel from sdcard in cwm of ics?
przemek211 said:
sorry, but i don't understand. i should install the ics kernel, e.g. from here: http://www.semaphore.gr/downloads/gt-i9000-ics and next i need to install JB kernel from sdcard in cwm of ics?
Click to expand...
Click to collapse
One you have an ICS kernel, your CWM will be able to Flash a JB ROM in recovery, once you have a working JB ROM, its up to you , IF you would like to have JB Kernel , just Flash that
thank you @xsenam
now i have JB ROM and JB Kernel.
Everything works, but in GB i had the Semaphore settings and now i didn't see that, only Superuser. Should it be in the apps?
przemek211 said:
thank you @xsenam
now i have JB ROM and JB Kernel.
Everything works, but in GB i had the Semaphore settings and now i didn't see that, only Superuser. Should it be in the apps?
Click to expand...
Click to collapse
use Semaphore kernel manager for JB http://forum.xda-developers.com/showthread.php?t=1886686
Ok, so again: thank you and sorry for my mistake in your nick @xsenman
Greetings from Poland for Republika ng Pilipinas
sadly i have one more issue, i've inserted my sim card and the phone shows: mobile network not available, when i'm going to search mobile networks it shows: 'error while searching for networks'. I tried to ON&OFF aeroplane mode (as i read in google), but it doesn't help.
przemek211 said:
sadly i have one more issue, i've inserted my sim card and the phone shows: mobile network not available, when i'm going to search mobile networks it shows: 'error while searching for networks'. I tried to ON&OFF aeroplane mode (as i read in google), but it doesn't help.
Click to expand...
Click to collapse
just check if you still have your IMEI, if not use a solution from My Android Solutions to fix it
BUT make sure you inserted your sim card in the correct direction
No i don't have an IMEI (checked by *#06# code, shows only "IMEI" without the number). So, if i didn't make a backup i need to flash an old ROM, go to CWM and make a wipe, delete EFS folder with root explorer and install the ICS kernel with Phone EFS Clear ticked?
I have next problem. My i9000 resets byself and goes to CWM. He made it for three times when i didn't use him.
przemek211 said:
No i don't have an IMEI (checked by *#06# code, shows only "IMEI" without the number). So, if i didn't make a backup i need to flash an old ROM, go to CWM and make a wipe, delete EFS folder with root explorer and install the ICS kernel with Phone EFS Clear ticked?
I have next problem. My i9000 resets byself and goes to CWM. He made it for three times when i didn't use him.
Click to expand...
Click to collapse
NO, all you need to do is , was written in above link
1) Download Root Explorer from Play Store and use it to
2) Search you internal SD card for sdcard/backup/efs
3) Copy nv_data.bin, nv_data.bin.md5 and nv.log paste them into /efs in your Phone memory
4) Reboot to get back your original IMEI
or
you can start from the beginning.. go back to GB 2.36 (use a JVU ROM + Root, upgrade to ICS CM 9 and than to CM10
First of all I installed twrp 2.2 and I felt into bootloop so I flashed Bootloader.tar and now my phone is working good;but I have a question ;If I go into recovery mode next time I will be in bootloop again and I must flash bootloader again?!
Sorry for my bad English!
alireza7991 said:
First of all I installed twrp 2.2 and I felt into bootloop so I flashed Bootloader.tar and now my phone is working good;but I have a question ;If I go into recovery mode next time I will be in bootloop again and I must flash bootloader again?!
Sorry for my bad English!
Click to expand...
Click to collapse
you can flash a CWM 6.0 or TWRP 6.0 to recover , IF your current TWRP is bad ,
xsenman said:
2) Search you internal SD card for sdcard/backup/efs
Click to expand...
Click to collapse
I don't have this backup folder
przemek211 said:
Hello. I'm going to install the new android into I9000. In the previous thread you recommend me the Semaphore kernel and Jelly Bean ROMs.
I installed the Semaphore from this topic: http://forum.xda-developers.com/showthread.php?t=1786220 by odin and I need to install zip file with my new ROM by clockworkmod recovery. I tried to install three types of ROMs: cyanogenmod10, c-rom, tsunami, however everyone shows 'error [path to file] (status 0) - installation aborted' when the installation starts.
What am I doing wrong?
Click to expand...
Click to collapse
if you have cwm(any version)
you can install whatever rom you have
if you are on other bases like GB or ICS and trying to install JB or new versions of cm10
you should do the installing process three times
there will be an error after first try and on the second it will install but you will get bootloop and you have to take out battery put it back and boot to recovery with three button combo and start the third time of install process after that do a restart and you are done
good luck :good:
thanks for your reply, but I solve that problem with @xsenman help. Now I have issue with mobile network.
@xsenman: i understand that i need to install old rom from your post and just make upgrade to ics? Or should I make any other steps in this tutorial?
I was playing around with a few roms and kernels, I then got CoCore 6.8 and flashed it through CWM onto ParanoidAndroid and now I cant access my phone or go into recovery. When booting normally, android.phone Stops working and when booting into Recovery I just get a loading circle ( similar to the buffering circle on YouTube )
Thanks in advance.
fe
inthebank said:
Be more specific: flash from what rom and kernel?
You can read the thread about downgrading from JB to GB, it has all the details you need to start from scratch.
Click to expand...
Click to collapse
So I had the ParanoidAndroid 2.90 rom, then I flashed CoCore .8 using CMW onto it and now I cant accces either my phone or recovery.
Trying to go back to stock with Odin now.
PA is cyanogenmod based, and such ROMs only work with cyanogenmod based kernels. On other words, cocore is just for stock roms. You mix both of them and you'll end up with what you have right now...
Flash everything again with odin and you'll be fine!
juanchotazo99 said:
PA is cyanogenmod based, and such ROMs only work with cyanogenmod based kernels. On other words, cocore is just for stock roms. You mix both of them and you'll end up with what you have right now...
Click to expand...
Click to collapse
Okay, I got the tock onto it but its stuck in Bootloop :/
Will I be able to just flash CWM and go back to a Backup without using odin to reinstall the stock ?
Okay, I managed to get CWM up and running, currently im restoring a Backup from this morning.
// Problem solved, restored perfectly and works now. Thanks for the help
Hi guys,
I have been trying to install cm based roms like ultimatum. i have stock gb 2.3.6 ddkq8, and cwm 6.0.4.6. but i am not able to install any of the cm based roms. Any help is appreciated. everytime i flash via cwm, it says installation status 7 and it reverts back to unrooted stock version. before flashing i wipe data/cache/ dalvik. am i missing something>
Thanks
shyam9876 said:
Hi guys,
I have been trying to install cm based roms like ultimatum. i have stock gb 2.3.6 ddkq8, and cwm 6.0.4.6. but i am not able to install any of the cm based roms. Any help is appreciated. everytime i flash via cwm, it says installation status 7 and it reverts back to unrooted stock version. before flashing i wipe data/cache/ dalvik. am i missing something>
Thanks
Click to expand...
Click to collapse
Hi,
Try reverting back to CWM 5. As far as i know, CWM 6 was made only with the intention of flashing Android 4.4 Kit Kat builds. Do post your result. You can find the CWM 5 link below. Hope I helped
CWM 5.0.2.6 fix for Galaxy Ace S5830
Hello
I'm trying to flash PacROM 4.4 and I'm encountering a problem with "set_metadata_recursive: some changes failed".
As I searched its because of old recovery tools, but I'm already uusing CWM 4.4.1 and I cannot find out what to do.
The way I tried to flash ROM :
1. Flash stock .254 ROM
2. Install TowelRoot and CWM
3. Flash with CWM 4.4.1 and this is where error come up (kernel 207 works)
Thank you for help
edit: I managed to install VANIR ROM, and later with the same method I managed to install PAC ROM too. I used CWR not Philz.
Your problem was most likely related to your recovery, which was probably outdated.
CM based ROMs sometimes have issues with older versions of CWM.
The reason why it worked after installing Vanir is probably because of Vanir's kernel which includes a more recent version of CWM.
Anyway, glad you got it working.
Hello XDA Developers!
I'm trying to install a custom rom om my i9305 bought in Denmark.
So far I have gotten the TWRP and Cyanogenmod recoveries to work, and through those I have successfully installed the two last versions of CM11 nightlies for the i9305 and the two last versions of AOSB 4.4.4 for the i9305. Yet I can't get any of them to boot past their respective logos (the phone moves nicely past the Samsung Galaxy S3 logo).
I have tried full system++ wipes, multiple Dalvik cache and cache wipes and Factory resets etc, but whatever I do my phone never gets past the CM / AOSB logo. I have waited for 20 minutes once for CM11 and once for AOSB, and 5+ minutes multiple times on both. Nothing changes.
Is there anyone out there with a 9305 that successfully installs custom ROM's that can help? Any help is greatly appreciated as I'm currently without a working phone
PS: Sorry if this is already an answered question. I googled extensively and looked at all the suggested threads before clicking "Submit" and couldn't find an answer.
Technical info:
Heimdall (latest unofficial from developer to get it working with OS X El Capitan)
Android Studio 1.4 with Platform Tools installed today
TWRP 2.8.7.0
Two latest nightlies from the official Cyanogenmod page attempted (I'm not yet allowed to post links), through TWRP as well as the recovery
Two latest versions from the AOSB website (still not allowed to post links, sorry)
MaHo_66 to the rescue
I was able to bring my phone back using the 9305N ROM posted on /galaxy-s3/development-i9305/rom-samsung-stock-4-4-4-rom-collection-t3124027
Still curious why it didn't work with the others, but at least now I have a phone again.
your issue is TWRP 2.8.7.0
several users, including me, had issues with the updated version as it's messes up with partitions etc. You experienced what we were having issues with. After installing the new recovery the installed ROM won't boot up anymore. The only way to fix this was to install stock ROM or a custom ROM based on stock.
I recommend to stay on TWRP 2.8.5.0 till the new version is fixed. Some users are working on a fixed updated TWRP recovery.
if you have made a nandroid backup of any previous rom that boots then try that, if that also fails to load then you need to install stock firmware again and start from the beginning again, stock firmwares can be found on samfirmware,
i have been flashing phones for several years, yet the other day i faced the exact same issue, not sure what caused it, it was also for the same device, stock firmware fixed all issues.
good luck
maultasche said:
your issue is TWRP 2.8.7.0
several users, including me, had issues with the updated version as it's messes up with partitions etc. You experienced what we were having issues with. After installing the new recovery the installed ROM won't boot up anymore. The only way to fix this was to install stock ROM or a custom ROM based on stock.
I recommend to stay on TWRP 2.8.5.0 till the new version is fixed. Some users are working on a fixed updated TWRP recovery.
Click to expand...
Click to collapse
Thanks for the reply! I also tried with the CyanogenMod Recovery, which ended the same way.
But installing a custom ROM based on stock worked, and is both way faster and pulls way less battery than the original ROM. So it all worked out in the end (until I can't resist the temptation and try to do it all again).
kamikaze702k said:
if you have made a nandroid backup of any previous rom that boots then try that, if that also fails to load then you need to install stock firmware again and start from the beginning again, stock firmwares can be found on samfirmware,
i have been flashing phones for several years, yet the other day i faced the exact same issue, not sure what caused it, it was also for the same device, stock firmware fixed all issues.
good luck
Click to expand...
Click to collapse
Custom ROM based on stock worked, thanks!
Were you able to install any custom ROMs after fixing your issue, or are you also "stuck" on a stock based ROM?
elysium7 said:
Custom ROM based on stock worked, thanks!
Were you able to install any custom ROMs after fixing your issue, or are you also "stuck" on a stock based ROM?
Click to expand...
Click to collapse
I flashed carbon rom 4.4.4, twrp recovery is user friendly but on this particular device the recovery was cwm, I don't like stock based roms
kamikaze702k said:
I flashed carbon rom 4.4.4, twrp recovery is user friendly but on this particular device the recovery was cwm, I don't like stock based roms
Click to expand...
Click to collapse
Nice, thanks! I'll try cwm next time then