Related
I know this does not really belong to development but I figured most of the people who want to do the update will come here... Please move the thread if you deem fit, mods ^^.
Anyway, I can't confirm if the method works since I'm rooted myself, but have found the following:
Hi,
I have found out a way to update the Nexus One to the new OTA that Google is pushing through, the one including multi-touch everywhere.
Go to the URL below:
http://www.mediafire.com/?rgnjl4hqmmi
and download.
Then save on to your sd card, not in any folders, and rename it update.zip (windows users just rename it update, .zip will come by itself)
1) Turn off your phone.
2) Turn on by holding down Power and the Trackball
3)Select Bootloader (Selection instructions on the top of screen)
4)Select recovery
5)An Android-Bot will come standing next to an open box
6)Press down Power and Volume Up
7)Select apply update.zip
8) Enjoy!
All the credits go to Fabolous from AndroidForums.com
Click to expand...
Click to collapse
Source: http://forums.t-mobile.com/t5/Nexus...3;jsessionid=237BA996FE5094EB98964E024CF21502
Also, in case you don't trust the MediaFire link, here's the Google One: http://bit.ly/9vvioF
Hope it helps.
I can confirm this method works for non root users. The MT is awesome, to say the least.
When I select recovery it shows a picture of an android next to a triangle with an exclamation point in it. I renamed the file and put it in the sd card, what am i doing wrong?
Unicellular:
5)An Android-Bot will come standing next to an open box
6)Press down Power and Volume Up
7)Select apply update.zip
:\
Wysie said:
Unicellular:
5)An Android-Bot will come standing next to an open box
6)Press down Power and Volume Up
7)Select apply update.zip
:\
Click to expand...
Click to collapse
Did you try pressing power and vol up at this stage? #5 isn't really a step, it just happens. I figured this was a given, but I guess not.
indiearmy said:
Did you try pressing power and vol up at this stage? #5 isn't really a step, it just happens. I figured this was a given, but I guess not.
Click to expand...
Click to collapse
Ya I had assumed that after selecting recovery the android should be next to a box but i did vol up and power down. It is working so far!
I've downloaded the file twice and I'm getting a caution icon with the android-bot. Any ideas as to what could be wrong?
I've also use two different sdcards.
Thanks for any assistance.
B3astofthe3ast said:
I can confirm this method works for non root users. The MT is awesome, to say the least.
Click to expand...
Click to collapse
Second that...this is very cool.
Redeye said:
I've downloaded the file twice and I'm getting a caution icon with the android-bot. Any ideas as to what could be wrong?
I've also use two different sdcards.
Thanks for any assistance.
Click to expand...
Click to collapse
I got the same thing...while at that screen, just did the volume up and power button and it gave me the option to install it.
hi Unicellular,
can you be more specific, i have also the same problem, and could not see any bot near a box, after selecting recovery first colored cross is seen then a bot with a triangle comes up.
Does this use the new kernel?
Trackz said:
I got the same thing...while at that screen, just did the volume up and power button and it gave me the option to install it.
Click to expand...
Click to collapse
Thanks!! It worked.
I think I had the caution icon because of the following.
E:Can't open /cashe/recovery/command
System is back up with multi-touch goodness.
what do you mean?
"The one including multitouch everywhere??"
the multitouch for me only works in the browser maps and the gallery
is there on that includes a multitouch everywhere??
lazoman. I was at the screen with the caution and android-bot too.
It's not really a quick press of "Vol. Up + power button" I kinda just spammed both buttons until it worked.
Trackz said:
I got the same thing...while at that screen, just did the volume up and power button and it gave me the option to install it.
Click to expand...
Click to collapse
I can confirm that this worked for me too. Thanks!
This update took away the haptic feedback when I press the little dots in the main screen to go 'left' or 'right'. Anyone know how to get it back again?
Does this update also apply the new radio update?
Does this method void the warranty or violate the TOS?
What about rooted devices ?
Why can`t i use this update if my phone is rooted ?
christiankk said:
This update took away the haptic feedback when I press the little dots in the main screen to go 'left' or 'right'. Anyone know how to get it back again?
Click to expand...
Click to collapse
Those buttons don't have haptic feedback (i havent updated yet and just checked)
Hello,
I just got my new Optimus 2x in.
After 2 days using it and draining a lot of battery life installing apps and getting the phone the way I liked it.
The LG apps installed on it started to annoy me bigtime.
So i did the most respectfull thing every tweaker does, i rooted the phone.
Installed the Titanium Backup software and started deleting LG apps.
The deleting part went perfect, then my screen turned black and the only thing working was the kill andriod app software on top.
So i pulled the battery and rebooted, nothing.... the phone got stuck at the LG logo.
Did a Hard reset Volume down + the power button.
It started the installation --> google login --> setting up extra account --> and then got the error about a wizard having problems.
So i guess my rom is corrupt.
Tried updating trough the LG software - emergency and got the message "not possible anymore".
Tried updating trough KDZ firmware update tool but it can not find the phone*.
*Downloaded the original firmware from a thread located here.
Does anybody know how to get in emergency mode so i can try different things.
Or maybe other options i could consider?
If not i'd might considering sending it in for warranty.
But it boots so there must be a way to get things working again.
Thx i appreciate getting all the help and ideas.
Im sorry to hear about your problem
Hope u can fix it
But may i ask how do u root it? I try z4root but no use...
heroddaji said:
Im sorry to hear about your problem
Hope u can fix it
But may i ask how do u root it? I try z4root but no use...
Click to expand...
Click to collapse
I rooted it with superoneclick.
--small update--
If i skip the setup part after my google login, i can force stop the wizard error.
But it does not go into android itself, i get the top bar but thats it.
The LG software recocgnizes my phone but says it's OK and it does not need a update.
Wait for android 2.2.3?
That might do the trick, but then i might have to wait more than 2 weeks
1.Turn the power off. If your LG Optimus 2X is frozen, pull the battery out and reinsert it
2.Hold the Home and Volume Down button
3.Press and hold the Power button until the device turns on
4.Follow the on-screen instructions to reset your device
That's the only option, on this time.
Tried this.
It says S/W Upgrade
Please wait
while upgrading...
and then nothing.
Try boot your phone to android then connect it to pc and run adb shell if shell working put all apk,s from rom dump here.
You have to copy all files to /system/app.
I'll give it a try tomorrow, have to get to work in like 3 hours =)
Im done for today.
Actually, if you get the notification bar, Android is working.
Sounds like you just deleted the Launcher, did you replace it?
If not, adb install and new launcher and you'll be good to go. Although you'll want one on your system partition too!
Have a look in the "Safe to remove" apps thread.
That's it, that's the one i accidently removed.
Any idea how to put it back on the phone?
As described above your post, trough ADB shell?
Can someone post LGLauncher in this thread?
FEARME said:
That's it, that's the one i accidently removed.
Any idea how to put it back on the phone?
As described above your post, trough ADB shell?
Can someone post LGLauncher in this thread?
Click to expand...
Click to collapse
Download here LGHome
Thanks i downloaded it.
But the thing is i can't run adb it gives me the error: device not loaded.
Tried installing the google usb drivers, gives me a no can do.
Another thing i figured out is this: Installing LG PC Suite IV.
It does give me the device connected, but i can not update.
* Can sync contacts
* Can sync Favourites
* Can sync Memo's
But no update (because it's not out yet)
Isn't there a way to fool the suite there is an update but in fact it's just the old firmware and replacing it (making it a repair).
This Thread is discussing the same problem as i am, btw
Fixed!
Obtained the LGLauncher.apk and emailed it to my google account!
Got it out of the above link i posted.
FEARME said:
Fixed!
Obtained the LGLauncher.apk and emailed it to my google account!
Got it out of the above link i posted.
Click to expand...
Click to collapse
Great, but you going to want to fix this problem:
FEARME said:
But the thing is i can't run adb it gives me the error: device not loaded.
Click to expand...
Click to collapse
djmcnz said:
Great, but you going to want to fix this problem:
Click to expand...
Click to collapse
as i said in the other thread you should use root explorer to copu the launcher to /system/app
if you dont it will be gone again if you ever factory reset.
And next time dont delete stuff... just freez it from titanium... Frozen apps are gone (cant be started by the system or seen in launcher) but you get them all back if you factory reset (so no risk of bricking)
OK... we dont get the few megs of free space by freezing... but that is not really an issue on this phone.
Well, i decided that i would attempt to boot android on my pure. The process went great. Finally it boots, and the screen is responsive when u go up and down to change screens but when you try to select the show all apps its unresponsive. I locked it and the lockscreen is unresponsive. What do I do? I can't figure out what is wrong with it. Please help me!
Go back to WM and delete the file called ts-calibration. run haret and at one point it'll ask you to do the screen calibration again. then it should work. also, use SpareParts to have the end/power button mapping fixed..
** oh yeah, next time post in the android section if you want a reply..
Since yesterday I have the following problem:
If I take my OB from the power plug and close the screen with the "lock" - button (top right) to turn off, the Screen remains black.
I can press any key but nothing happens!
Only when I take the battery out and re-launch it works again OB. At least until I turn off the screen again. However, the mobile is connected to the AC adapter or via USB connected to the PC, I have no problems until now!
I hope anyone cold help me!
THX Marduk
At least you also mention your system configuration, Stock ROM, CM build, kernel, etc.
I´m using the CM71 Nightly withe the Nova2.6.35.7 v11c Kernel. The build No. is GWK74.
Can you take logs? First you have to activate log module via Nova Application, then reboot.
I made the log file.
Where can i find it to post it here? By the way: sometimes my phone shows me the cwm bootscreen but i´ve done nothing to reboot!!! Its like i discribe in the first post.
Yes, here? upload it to pastebin, dropbox, box.net or else. If you can't post link because having less post, remove your http:// at front of your link, or code it with
Code:
I mean where can i find the logfile? Where is it stored on my phone?
Marduk666Nor said:
I made the log file.
Where can i find it to post it here? By the way: sometimes my phone shows me the cwm bootscreen but i´ve done nothing to reboot!!! Its like i discribe in the first post.
Click to expand...
Click to collapse
post it on pastebin.com and post the link here
have you set the "G" button on Nova Configuration?
no i haven´t done it. I didn´t know i need it to do!
Marduk666Nor said:
I mean where can i find the logfile? Where is it stored on my phone?
Click to expand...
Click to collapse
Ouw, sorry, you can catch log with app, like this one https://market.android.com/details?id=com.nolanlawson.logcat
Make record with it, then reproduce your problem..
Marduk666Nor said:
no i haven´t done it. I didn´t know i need it to do!
Click to expand...
Click to collapse
try to set it first
maybe that triggers the problem
I can´t reproduce it by myself. it happens when my phone want it to do!
Marduk666Nor said:
I can´t reproduce it by myself. it happens when my phone want it to do!
Click to expand...
Click to collapse
okay lemme get this straight
aprold said (i believe i red it somewhere), when the first time you flash his v11 kernel, the G button wasn't assign to anywhere
and when you reboot, the system replace the keylayout with his keylayout
with the null G button variable, i believe this make an error and create an empty keylayout to the hard button
at least that's what i tought
Ok! i´ll try it! Where can i change the setting of the "G" button? is it in the Nova menu?
yes,it's on the Nova Setting
but i'm not saying it'll work 100%
just trying to help
It looks like it is working! Let´s see what happen the next few minutes/hours/days!
Thank u all!!!
It was the G button! Thank u guys for the great help!!!
Sent from my LG-P970 using XDA App
u're welcome
I spent several DAYS getting this watch to work properly (and by properly, I mean rooted and with a new mod).
You DO NOT need an approved phone for this to work! This will allow your watch to work with virtually any phone.
All you need is a Windows PC (with Odin and the Samsung ADB drivers, although these may not be necessary...), your watch, the charging cradle, USB cord and Wondershare (although there are alternatives to this...).
Because I am a new user and can't submit links, this next part is going to SUCK for you:
Here are things to download:
Samsung ADB Drivers - Google!
The Latest Version of Odin - Google!
Wondershare MobileGo for Andoid - Google it!
V700XXUAMK7 Firmware (Build Date: 13.11.2013 -> Region: BTU (United Kingdom) PDA: V700XXUAMK7 Changelist: 2124806 Android: 4.2.2 ) - Easy to Google
Null TWRP (You can find on this forum)
SuperSU ZIP FILE (Do not open) - (Google for "SuperSU Flashable Zip" )
THE REAL NULL ROM 23!!!! Working as of 1/10/2017 - THANKS TO dbest1010
There are several pitfalls that are introduced because of how OLD most of the information on here is.
First, when you turn on your watch, you may be wondering, how can I get into USB Debugging mode?
If you are stuck on a screen that is looking for a phone to connect to the device (and this may happen more than once during this process), then you need to know this VERY SIMPLE TRICK:
Press your finger over the area where the bottom of the screen is. An orange and black box should appear with some numbers/letters in it. Do this repeatedly. A LOT. Keep pressing it. Sometimes swipe up a little or down a little, it doesn't matter, just keep rubbing it like it was your lover. Before long (sometimes it takes a couple of minutes, seriously, do not give up), the phone will go to semi-normal operation.
This will allow you to go into the settings and hammer near the version area several times (unlocking developer mode), which on the previous screen will allow you to select for USB debugging.
I'm not sure why this trick is not explained very well elsewhere on these forums. Really, if you want pretty much zero functionality from the watch, you can stop here.
You may not have the "stock ROM" loaded on this watch. Fortunately, these are still easy to find. You want the BTU version if you are in the United States.
This step is important, because even if you do not NEED to do this, knowing how to do this may help you recover from a "soft brick", and get back on track.
Put the watch into Download Mode.
To do this, hold the power button until the "Rebooting" menu appears.
Now, press the power button several times (4 or more)
A new menu appears, use the power button to move down to "Download"
Hold power button for 3 seconds, then release it
Download mode will appear
Connect the USB to your PC, then the cradle, then add the watch to the cradle
Open Odin
Leave everything as normal, and click on "AP"
Select the V700XXUAMK7 file/image
Run the process
This should get you the stock firmware rom loaded.
Here are some problems you may encounter during this phase:
When you connect the watch to the cradle, sometimes it shuts off or does something unintended. Make sure the cradle and usb are connected to the PC *before* trying to add the watch, rather than trying to plug the USB into the cradle once the watch is attached.
Odin may not "see" the watch as a device, or the installation process may not complete as desired.
MAKE SURE that Kies, Wondershare, ADB and all that other stuff is NOT RUNNING. By not running, I mean ctrl+alt+del and go to task manager in Windows and kill ALL instances of them, especially Wondershare. Do this before you think you got a bad image or something. This particular step gave me a headache for a while.
The watch should be booted with the regular firmware now. You may need to do that pressing trick on the main screen again to get it to do much else.
For installing the custom recovery ROM (this is NOT the custom ROM, but is needed and recommended to install null on your watch), you follow almost the same exact procedure as before.
EXCEPT,
1.) UNCLICK in the options for Odin "Auto Reboot"
2.) When you get to the part where you add the V700XXUAMK7 image file, instead, when you click "AP", add the Null TWRP file you downloaded previously.
After a successful install ,the watch will still be on the "downloading" screen. It is safe to restart it now, however, and you can hold the power button down and then press it a few times during the "Rebooting" phase to change to recovery mode.
If you did this right, after a brief Samsung Logo, you will see the Null TWRP screen which has several nice options on there for you.
Now, what you should do, since you know that it worked, is you need to ROOT THE DEVICE.
Don't worry about no Impactor stuff or any of that crap. If you're like me, it will not work. Don't worry about ADB or any of that either.
Use your free trial of Wondershare (or your alternative method), and add the SuperSU ZIP file to the ROOT DIRECTORY of your SD card. With Wondershare, you do this by opening Wondershare, and then connecting the device via USB. Remember what I say, put USB to PC, then to cradle, then add the watch.
Why come your Wondershare no see the watch? Make sure you did the trick on the home screen (pressing the stupid box a thousand times) to get into the Settings and enable Developer mode (keep clicking the version) and USB Debugging.
DO NOT BOOT THE WATCH INTO DOWNLOAD MODE! What are you doing?! Just open the watch up and run it regular so you can see the time, make sure USB Debugging mode is turned on, and Wondershare should see the watch. Still having problems? Try for install those drivers I linked at the top for Samsung devices. You may not need to do this.
You are STILL having problems?! Make sure no other process similar is running. No Odin. No ADB. No Kies. No Impactor. Nadda! Ctrl+alt+del and get rid of all those type processes. Then try it again.
Now, to finish the root.
Once the file is transfer over, disconnect the watch again, and reboot into recovery mode.
Go to install and select that SuperSU zip file, it will install right from the zip.
As an extra added measure, go down into the advanced options of TWRP, the recovery mode, and press on the "fix permissions". I don't know, maybe this does not help, but it does not hurt it either.
Restart the watch regular, run the SuperSU program from the "apps" section, and everything should look fine, and your watch is now rooted.
Power back down and go into recover mode again.
NOW, important! Go to TWRP again and go to BACKUP. Create a backup.
This backup is useful from this point so you can recover a fully working stock version that is rooted, because the next step may cause you a lot of frustration.
DO NOT GO TO SOURCEFORGE!!! F0mey has a page on there for the NULL ROM, and it is not even for the same device! It has version all the way to 27. It doesn't matter if you download the oldest version on there is almost 1GB and it is NOT THE CORRECT THING FOR THIS WATCH.
Do not waste your time! I kept flashing all kinds of bogus stuff on my watch trying to get it to work. Some other guy has a Galactus Mod. Don't bother! It will not work!
If you're sitting there trying to install some bogus ROM, and getting stuck in reboot mode and everything, just use that recovery you made and then come back to this thread when you have some sense in your head.
Go back to the top and get the REAL Null Rom 23. This is a mirror somebody found hosted by Kent. it is only about 300MB, not no 900MB file like the stuff on F0mey Sourceforge page.
How to install it?
Well, the same way you moved that SuperSU file over to the SD card with Wondershare, what you can do, is move the null rom over to the SD card using Wondershare. Just move the ZIP, same way as with the SuperSU. Do not open it! Once it is on the watch, this is the easy part, go into the recovery mode again, go to install, and install it.
You'll know it is correct because on the very first screen, it will say the device it is made for before it installs. The other roms say i398 or something, which is NOT THIS WATCH.
It will have all kinds of options you can tap on with your grubby finger. The recommended settings are fine, you may want to tick some of the Google stuff, like the Play Store.
Anyhow, now the whole thing will take a few minutes to install/flash onto your device.
When it starts to boot up, what is this?! It gets stuck in a loop! Galaxy logo, over and over!
No!!! After so much work! This can't be happening!!
Don't worry, this sound stupid, but just connect the watch to the cradle with the USB connected to the PC. Don't do anything else. For some reason, now it will work and boot fine and you'll be able to unplug it later and do what you like with it.
You will have to do the trick of rubbing the main screen again, with the orange and black box. Sorry, it takes forever, I know. Don't give up. Once you are done, you can connect it with your phone or whatever device.
Make sure to turn on Bluetooth on your phone, and you should be able to see the device (if not play with the bluetooth settings on the watch). Pair the devices, which requires tapping something on both screens.
Most likely, your phone also has an option under "hotspots and tethering" to allow bluetooth sharing of the internet with the watch. Once you enable that, go to the watch, and go to the bluetooth settings where the phone is connected to it, there is options in there for internet sharing with the device over bluetooth (just enable it, it is an on/off toggle).
What did I forget? This is only version 0.01 of this tutorial for you. If you need some more advices, you can write me. I may not check often, but that is life. You can find my email probably from my profile, also.
Dude..... I love you !!!! I thought id never see the gear null rom ever again. Thx bro
Awesome write up made my watch very happy!!
Thanks for all that,
Help
Good post, i have a question, this only work in android 4.3? i have 6.0 and the gear say error connection, thanks and sorry for the bad english
the recovery mode text is so small i cant read it. its stuck at the top portion of the screen. any help? i feel like i wasted money buying this. there is zero support here.
Thank you for this! This is very helpful!
Bad news, though... The Null 23 link isn't being hosted again. Anyone know a valid link to the VALID Null 23 rom?
I need the Null_23.zip too!
tamcswain said:
Thank you for this! This is very helpful!
Bad news, though... The Null 23 link isn't being hosted again. Anyone know a valid link to the VALID Null 23 rom?
Click to expand...
Click to collapse
I have same situation!! That link is not working anymore so i'm waiting the Null_23.zip custom rom for Galaxy Gear 1 which i got it 2 days ago!
Anyone have the Null_23.zip Samsung galaxy Gear's custom rom for share it to us?
Jc Lee said:
I have same situation!! That link is not working anymore so i'm waiting the Null_23.zip custom rom for Galaxy Gear 1 which i got it 2 days ago!
Anyone have the Null_23.zip Samsung galaxy Gear's custom rom for share it to us?
Click to expand...
Click to collapse
If you find something, let me know! I will do the same. I message fOmey (the Null 23 rom creator) and he confirmed he doesn't have it anymore or any links. I also asked to confirm the Null 23 roms on sourceforge.net are incorrect since they are almost 1gb in size and states in the rom installation "i9300" which is the galaxy s III phone.
https://drive.google.com/drive/folders/0B_ka0GfEx6wOMmVfb2tQblJmTmc?usp=sharing
KcajBoy said:
I spent several DAYS getting this watch to work properly (and by properly, I mean rooted and with a new mod).
...
Because I am a new user and can't submit links, this next part is going to SUCK for you:.
Click to expand...
Click to collapse
My gen 1 still works on null 23, but I got a nostalgic kick out of reading your write up. Nice job. Took me back to some good - although often frustrating - days. F0mey did nice to infuse new life back into this classic.
I came to see if anything better was out here since I last visited a good while ago; but not really. Maybe it's time to finally buy something new, and retire this one to a time capsule. (Next to the Casio calculator, $1 g-shock, nelsonic pacman/frogger, stainless mickey mouse, blue gobot/transformer, and gray fighter jet. I wish. Those didn't survive.)
Gear 1 won't connect with Samsung S8
I don't know if I am in the right place but I try and hope you wil tell if I am or not.
My watch Gear 1 always worked with my Samsung S7Edge. No problems. Now I have a Samsung S8 and it won't connect. My Sansung S8 finds my Gear1, but when I have to confirm on my Gear1 it tells me to reset the Gear 1 to its factory settings. It resets, but only starts and I cannot confirm anywhere the number that appeared on the phone. Somebody can help me?
Thanks in advance.
Only acknowledge on phone not on watch
Idebutterpiep said:
I don't know if I am in the right place but I try and hope you wil tell if I am or not.
My watch Gear 1 always worked with my Samsung S7Edge. No problems. Now I have a Samsung S8 and it won't connect. My Sansung S8 finds my Gear1, but when I have to confirm on my Gear1 it tells me to reset the Gear 1 to its factory settings. It resets, but only starts and I cannot confirm anywhere the number that appeared on the phone. Somebody can help me?
Thanks in advance.
Click to expand...
Click to collapse
You just have to acknowledge on the phone not on the watch. Just had that issue with an old S3
Battery life is terrible in null did that last year and went back to tizen
Sent from my SM-G950F using Tapatalk
A very Simple Trick - access debug mode without phone
Great guide, feels like im getting somewhere now. Slightly easier way of accessing Samsung Gear without pairing with another phone is to- On the install Samsung Gear screen(on your watch) try tapping 10-15 times on the white gear watch picture on the top left. This will bring up some message at the bottom about 'bluetooth 3 second press' whereafter you long press for 3 seconds on same picture. Watch is unlocked much easier than 'making love' and swiping up and down to get into settings haha
One question though. After installing stock rom should my software version not change in gear information settings?It seems that I am having trouble with 100% correct drivers because wondershare cant connect to my device, although it shows up in my file explorer is official latest samsung drivers fine or should i download fastboot drivers?. (any reliable links to stock rom,recovery,usb drivers and custom rom would be greatly appreciated,feels like im having trouble with the correct zip files)
I had a hard time getting all the files together so I have made a zip up and it has every file you need,even the firmware V700XXUAMK7,I added that cos on the Samsung Firmware website on slow download it took me 2 hours to download it and it like only 411 mb.
Super SU v2.85 in it there and works fine ,use Impactor_0.9.14,run Impactor.exe and click start and wait for it to finish then connect using Wondershare MobileGo and install the supersu-2-82.apk,Google play on Wondershare MobileGo don't work cos it can't find the device cos Google Play is not on the Gear 1 ,click on supersu app on the Gear 1 and it will ask you to update root files,just click on normal and it will update it and done,you have root on Gear1 now..
Here is the files in a zip.. Hope this helps sommeone,it would of helped me.. its on Mega.. here https://mega.nz/#!sAxinCDa!GR47wt4cQ6g74Ya_9An0bfmf2mel1o8dV0sNiqK3A6M
spannernick said:
I had a hard time getting all the files together so I have made a zip up and it has every file you need,even the firmware V700XXUAMK7,I added that cos on the Samsung Firmware website on slow download it took me 2 hours to download it and it like only 411 mb.
Super SU v2.85 in it there and works fine ,use Impactor_0.9.14,run Impactor.exe and click start and wait for it to finish then connect using Wondershare MobileGo and install the supersu-2-82.apk,Google play on Wondershare MobileGo don't work cos it can't find the device cos Google Play is not on the Gear 1 ,click on supersu app on the Gear 1 and it will ask you to update root files,just click on normal and it will update it and done,you have root on Gear1 now..
Here is the files in a zip.. Hope this helps sommeone,it would of helped me.. its on Mega.. here https://mega.nz/#!sAxinCDa!GR47wt4cQ6g74Ya_9An0bfmf2mel1o8dV0sNiqK3A6M
Click to expand...
Click to collapse
Is not available anymore