[Q] EVR UK I9305 Problem - Galaxy S III I9305 (4G LTE + 2GB RAM) Q&A, Help &

HI Total newb here lol
Where do i start , well got a uk everything everywhere i9305 tried flashing cf autoroot like i have done other models in the past only this time for some reason it didnt root so thought ill return to stock firmware and start from scratch all was going well got the right stock tar file , ran odin , Pass.
Only it wont boot past Samsung Galaxy S III GT-I9305 screen now and cant get into recovery mode either although i can enter download mode.
Any help on this would be greatly Appreciated .
Thanks

Flash again fails download new rom .
New as in not the one that you downloaded .

JJEgan said:
Flash again fails download new rom .
Click to expand...
Click to collapse
Tried multiple times mate , newb here what do u mean by new rom ?

cybersonic123 said:
HI Total newb here lol
Where do i start , well got a uk everything everywhere i9305 tried flashing cf autoroot like i have done other models in the past only this time for some reason it didnt root so thought ill return to stock firmware and start from scratch all was going well got the right stock tar file , ran odin , Pass.
Only it wont boot past Samsung Galaxy S III GT-I9305 screen now and cant get into recovery mode either although i can enter download mode.
Any help on this would be greatly Appreciated .
Thanks
Click to expand...
Click to collapse
Are you on 4.3 bootloader? To know that, turn off your phone and then turn it on again by pressing simultaneously the buttons "POWER", "VOLUME -" and "HOME". Press up in next screen and tell us if your 2 last lines have something to do with Knox.

JJEgan said:
Flash again fails download new rom .
Click to expand...
Click to collapse
shucrut said:
Are you on 4.3 bootloader? To know that, turn off your phone and then turn it on again by pressing simultaneously the buttons "POWER", "VOLUME -" and "HOME". Press up in next screen and tell us if your 2 last lines have something to do with Knox.
Click to expand...
Click to collapse
Yeah it has Knox mate

it says
odin mode
product name : GT-I9305
custom binary download : yes (4 counts)
current binary : custom
system status : custom
knox warranty void : 1
ap swerv : A2

Yes that's 100% WARRANTY VOID.
Is Odin throwing any error messages .

JJEgan said:
Yes that's 100% WARRANTY VOID.
Is Odin throwing any error messages .
Click to expand...
Click to collapse
nope saying pass everytime which is weird

Well I was in the same trouble almost a month before.
What I did was
1. flashed philz recovery latest version backed up efs through it Copy the Efs back up to pc through mount storage option
2. Wiped data factory reset , cache , dalvik
3 Went to Mount and storage and formated every partition except external sd card
3 Flashed Alliance rom (4.3) . Worked without Imei
4. Flashed a 4.3 modem and also restored efs
5 had imei etc everything
6 made a cwm backup
7 flashed uk ee 4.3 rom ...
Note remember
Back up efs to somthing other then ur mobile . just incase sd formated
Also in step 3 i wiped everythong including tombstone ( I dont know what that is)
Good Luck ......:good:
---------- Post added at 02:05 PM ---------- Previous post was at 02:05 PM ----------
AMoizK said:
Well I was in the same trouble almost a month before.
What I did was
1. flashed philz recovery latest version backed up efs through it Copy the Efs back up to pc through mount storage option
2. Wiped data factory reset , cache , dalvik
3 Went to Mount and storage and formated every partition except external sd card
3 Flashed Alliance rom (4.3) . Worked without Imei
4. Flashed a 4.3 modem and also restored efs
5 had imei etc everything
6 made a cwm backup
7 flashed uk ee 4.3 rom ...
Note remember
Back up efs to somthing other then ur mobile . just incase sd formated
Also in step 3 i wiped everythong including tombstone ( I dont know what that is)
Good Luck ......:good:
Click to expand...
Click to collapse
Also ask other people too m also a total newbie

just flashed this through odin and fixed it
L5_I9305EVRGML3_I9305XXUEMK1_HOME.tar.md5
thanks for all your help everybody
p.s which root tar would i need now to root my phone ?

cybersonic123 said:
just flashed this through odin and fixed it
L5_I9305EVRGML3_I9305XXUEMK1_HOME.tar.md5
thanks for all your help everybody
p.s which root tar would i need now to root my phone ?
Click to expand...
Click to collapse
Philz Recovery .

1.07
would this not work ?
CF-Auto-Root-m3-m3zh-gti9305.tar.md5
what is philz recovery ?
thanks

Related

[Q] hey my Galaxy note is stuck at boot plz help

ok hello guys i have an international version not the at and t anyways yesterday i used mobile odin pro and flashed to the new ics germany update it was very nice but then i went to a site called rootgalaxynote and installed a cm9 for the Chinese leaked ICS before installing it i backed it with CMW and then i went to recovery mode and installed the CM9 rom but when it was finished it started booting then booted again and again i tried to restore the CMW backup but at the end it said SYSTEM RESTORE FAILED ! tried flashing it withh pc odin but it gets stuck at nand write pleeeeease help pleeeease help i will do anything to fix my phone
Deademon said:
ok hello guys i have an international version not the at and t anyways yesterday i used mobile odin pro and flashed to the new ics germany update it was very nice but then i went to a site called rootgalaxynote and installed a cm9 for the Chinese leaked ICS before installing it i backed it with CMW and then i went to recovery mode and installed the CM9 rom but when it was finished it started booting then booted again and again i tried to restore the CMW backup but at the end it said SYSTEM RESTORE FAILED ! tried flashing it withh pc odin but it gets stuck at nand write pleeeeease help pleeeease help i will do anything to fix my phone
Click to expand...
Click to collapse
Can you access recovery? I am kind of in a similar situation but I have no access to recovery only download mode.
jwais said:
Can you access recovery? I am kind of in a similar situation but I have no access to recovery only download mode.
Click to expand...
Click to collapse
Op flashed Chinese leak...which has kernel known to brick phones
Note_E said:
Op flashed Chinese leak...which has kernel known to brick phones
Click to expand...
Click to collapse
i used to be able to enter recovery mode but now i went to a store to fix it and they tried to return it to the original samsung software in says AN ERROR OCCURRED WHLIE UPGRADING FIRMWARE what should i do ?
Deademon said:
i used to be able to enter recovery mode but now i went to a store to fix it and they tried to return it to the original samsung software in says AN ERROR OCCURRED WHLIE UPGRADING FIRMWARE what should i do ?
Click to expand...
Click to collapse
They borked your phone by doing that. Samsung repair. You can try pit file followed by stock gb buts its hit or miss
heimdel should help you. i dont have much time to explain. check how heimdell works. factory.rs and zimage file is enough to flash from heimdell rest leave them blank. take the good working base. you can also take the new PLY ics base. it should work

[Q] How to UnBrick galaxy n7000

Hi,
other day I was playing game on my note 1 and then battery ran out and now my phone wont boot up and it is stuck at animated samsung logo.
It was running on stock rom and it was never rooted.
Now when i go in recovery mode it gives this error:
failed to mount /efs
I tried installing the stock rom but with no luck.
I am newbie into this all, so can you please guide how to fix this ..
Regards
ahmedmasu said:
Hi,
other day I was playing game on my note 1 and then battery ran out and now my phone wont boot up and it is stuck at animated samsung logo.
It was running on stock rom and it was never rooted.
Now when i go in recovery mode it gives this error:
failed to mount /efs
I tried installing the stock rom but with no luck.
I am newbie into this all, so can you please guide how to fix this ..
Regards
Click to expand...
Click to collapse
You should try to put your Note in download mode and flash a stock rom with Odin.
You must flash the PIT file to repartition your phone's storage, chose the right one (16 or 32 Gb).
I am almost sure that your phone is soft bricked and it is recoverable.
If it don't work, thant mean that your have bad blocks in your phone's storage. Have you wiped your note while under ICS android ?
what rom were you on? if JB, try a factory reset.
nokiamodeln91 said:
what rom were you on? if JB, try a factory reset.
Click to expand...
Click to collapse
I was on latest stock rom which is ICS.
Btw I tried to reset it to factory but with no luck
lionelia said:
You should try to put your Note in download mode and flash a stock rom with Odin.
You must flash the PIT file to repartition your phone's storage, chose the right one (16 or 32 Gb).
I am almost sure that your phone is soft bricked and it is recoverable.
If it don't work, thant mean that your have bad blocks in your phone's storage. Have you wiped your note while under ICS android ?
Click to expand...
Click to collapse
Thank for your reply.
I tried flashing the stock rom with Odin but the error remained there
Can you please give me a link from where I can get PIT file?
ahmedmasu said:
I was on latest stock rom which is ICS.
Btw I tried to reset it to factory but with no luck
Click to expand...
Click to collapse
You shouldn't be doing a reset on ICS stock at all.. Install Philz kernel for ICS and wipe data and cache.. When flashing a stock rom using odin, is it a success?
nokiamodeln91 said:
You shouldn't be doing a reset on ICS stock at all.. Install Philz kernel for ICS and wipe data and cache.. When flashing a stock rom using odin, is it a success?
Click to expand...
Click to collapse
Is there any guide\link to do this ?
http://forum.xda-developers.com/showthread.php?t=1901191
nokiamodeln91 said:
You shouldn't be doing a reset on ICS stock at all.. Install Philz kernel for ICS and wipe data and cache.. When flashing a stock rom using odin, is it a success?
Click to expand...
Click to collapse
I have successfully flashed rom on my phone which is : N7000ZSLPF_N7000OZSLPF_OZS
My phone is now out of bootloop but now I face a different issue that I cant get my sim card work, it gives no signal and I noticed one more thing that IMEI of my phone is blank.
I went into recovery mode and it is still showing that efs error as it was showing before...
Any suggestion what should I try to fix this ?
So you never installed any rom or a custom kernel?
---------- Post added at 03:15 AM ---------- Previous post was at 03:11 AM ----------
Look for a file on your storage named efs.autobackup.img. If nothing like that, check on this site http://www.cvxcvx.pl/en/podstrona-0/naprawa-efs-w-i9100-n7000/ for some instructions. Read carefully and proceed.
nokiamodeln91 said:
So you never installed any rom or a custom kernel?
---------- Post added at 03:15 AM ---------- Previous post was at 03:11 AM ----------
Look for a file on your storage named efs.autobackup.img. If nothing like that, check on this site http://www.cvxcvx.pl/en/podstrona-0/naprawa-efs-w-i9100-n7000/ for some instructions. Read carefully and proceed.
Click to expand...
Click to collapse
I followed the instructions provided by the manual ... after step 2 I get imei but after step 3 it get empty again.
Signals do come after step 2 but when I try to make some call it says "Not registered on network".
Looking forward to your reply.
i cannot help you in this case if there is no efs backup.. so.. you on your own..
nokiamodeln91 said:
i cannot help you in this case if there is no efs backup.. so.. you on your own..
Click to expand...
Click to collapse
Thanks for your help so far...
I currently have an imei but it is some random number starting with "004999" and I do get signals but cant make a call .. Do you know if there is some hope for me or not .. and what else I can try.
This is the developer imei. You may be able to make calls of you try a GB rom. Or there is one rom by ThaiDai which had some work around built into it. I don't know which one.
Else the site I mentioned earlier has contact info of cvxcvx. He can fix your phone remotely but by charging about 10 euros.
Need help for a bricked N7000
Hi guys,Im a complete newbie to the whole custom rom scenario. Yet, after being fed up of touchwiz on my N7000 i decided i wanted to taste some KitKat on my phone. After seeing many videos with positive reviews I thought it would be a rather easy process. But somehow I seem to have made a mistake and now my phone is stuck on Samsung Galaxy Note N7000 logo. I cant get into recovery mode as suggested on most places. As of now I only have access to the download mode but dont know what to do with it.
Here's what I tried doing :
1) I was on stock OS, and these are my specifics : Galaxy Note N-7000 running JB 4.1.2
Baseband version : N7000DDLS6
Kernel version: 3.3.31-906407
BUild number:JZO54K.N7000DDLSC
2) As I was following the procedure from Omnirom's official website, I first rooted my phone using Framaroot's single click root app. This gave me SuperSU app.
3) Then I tried installing TWRP recovery (recommended by Omni) but they dont support the N7000. I read a few other tutorials where it was stated the CWM recovery and that too Philz CWM recovery is the best to go with. Apparently it is just stock kernel with CWM recovery. Since the latest one(philz_touch_6.07.9-n7000) was not being installed, I installed the one before that which worked (PhilZ-cwm6-DDLSC-ODD-5.11.2-signed).
4) I even installed the ROM Manager as per the tutorial. However, uptil now I could access recovery mode ( Vol UP+Home+Power) and i saw the touch enabled philz recovery mode once. Then i did system reboot.
5)After reboot, this is where I did a mistake in my opinion. I opened ROM Manger and clicked on "open in recovery mode" option. Since then the phone is stuck on the Galaxy Note N7000 logo. Please help me revive the phone. Thanks in advance. Again, Im doing this for the first time and most terms are new to me. So please explain the procedure as other tutorials are not very clear.
You missed on reading the most important instructions.
Rom manager will not work with note. Recovery is built into the kernel on note and not as a separate partition.
Try harder to get into recovery mode. If you still can't, get the ddlsc Philz kernel tar version. Flash it using Odin. Then power off the device and boot into recovery. Then flash raw kernel. Reboot recovery. Flash omni and other required zips.
nokiamodeln91 said:
You missed on reading the most important instructions.
Rom manager will not work with note. Recovery is built into the kernel on note and not as a separate partition.
Try harder to get into recovery mode. If you still can't, get the ddlsc Philz kernel tar version. Flash it using Odin. Then power off the device and boot into recovery. Then flash raw kernel. Reboot recovery. Flash omni and other required zips.
Click to expand...
Click to collapse
How do I do i install the kernel using ODIN? I can only access download mode and nothing else. I cant access recovery mode. Please help.
PhilZ kernel has two versions, zip and tar. Use the tar version to flash via odin.
Sent from my GT-N7000 using Tapatalk 2
forest1971 said:
PhilZ kernel has two versions, zip and tar. Use the tar version to flash via odin.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Bro can i ask for the link of philz kernel and raw kernel. I'm new here. Thanks in advance.
ANDROID-000 said:
Bro can i ask for the link of philz kernel and raw kernel. I'm new here. Thanks in advance.
Click to expand...
Click to collapse
http://www.mediafire.com/?ep82ku4c6...o6dtlx8lbc3xz,ob3q9g36b9b3w22,d3v1gys7cbckiet

(Solved) i9070 jellybean can't start

hi all
i have samsung gt-i9070
i was on jellybean stock rom
i tried to install Cm 10.1 but it didn't start i did something wrong but it isn't the problem
i wanted to return to stock jellybean i falshed it by odin but the setup wizard crashed several times and "blahblah.gapps failed to start"
i tried several copies of the stock rom and every time i wiped cashe and reset everything using Cwm
I9070JVBMD1_I9070OJVBMD1_XSG
I9070XXLQG_I9070ITVLQ3_ITV
it all crashed
so i managed to downgrade to Gingerbread but i can't return to jelly bean any more
note:in Cwm : "efs can't be mounted" & "failed to load efs" in red
please help >>>>>>>>.thanks all
note:there was a solution didn;t work for me in forum
it is
install stock jelly-root-wipe system and preload-mount-install stock jelly
finally it is solved from this topic
http://forum.xda-developers.com/showthread.php?t=2353293
try to installing FULL (3 files cont., by Odin) GB
after reboot just flash single-file JB
Sent from SGSA using Tapatalk 4
pawelarc said:
try to installing FULL (3 files cont., by Odin) GB
after reboot just flash single-file JB
Sent from SGSA using Tapatalk 4
Click to expand...
Click to collapse
i did that before and i'm on Ginger now
but ican't return to jelly it crashed all times
up
please help
* Use Odin 3.07 for JB not 1.85,
* Download THIS firmware and extract from zip,
* Make sure you installed drivers (ODIN should say "Added" when you connect your phone in download mode)
* Open ODIN and give the tar file (you extracted) to PDA section,
* Close the device then go into download mode and connect device to PC, (and again ODIN should say "Added")
* Flash
- after flashing phone probably go into bootlop so remove the battery and go to the recovery mode (VolUp-Home-Power) choose WIPE DATA / FACTORY RESET (This one wipe your apps not internal storage)
it can't help
i did that and the wizard crashed again no change
up up please hellllllllp
i will burn this mobile
Install JB, go to recovery ,do a factory reset.
Sh0m1 said:
Install JB, go to recovery ,do a factory reset.
Click to expand...
Click to collapse
i did that more than 10 times no change
i did it by the original recover and custom recover cwm
amr diab said:
i did that more than 10 times no change
i did it by the original recover and custom recover cwm
Click to expand...
Click to collapse
What cwm did you used? Temp one?
Try this: put some JB stock based ROM on your sd, open CWM and do factory reset and wipe everything you see (cache, dalvik, system, preload...). After that install ROM.
Sent from my GT-I9070 using Tapatalk
shut_down said:
What cwm did you used? Temp one?
Try this: put some JB stock based ROM on your sd, open CWM and do factory reset and wipe everything you see (cache, dalvik, system, preload...). After that install ROM.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
yes temp one
i did that and i installed harshjelly
there is no wizard and it opened normally but no apps can start
and there is no call-camera everything not appeared
amr diab said:
yes temp one
i did that and i installed harshjelly
there is no wizard and it opened normally but no apps can start
and there is no call-camera everything not appeared
Click to expand...
Click to collapse
Try to mount prelaod in recovery, and flash it again. If that do not help, download gapps for 4.1.2 and flash it. Maybe it is because of wrong gapps, left from CM.
Sent from my GT-I9070 using Tapatalk
shut_down said:
Try to mount prelaod in recovery, and flash it again. If that do not help, download gapps for 4.1.2 and flash it. Maybe it is because of wrong gapps, left from CM.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
didn't help man
i also format system and preload then mount but no help too
but i think this problem because of efs can't be mounted in recovery ?
and there is an option on odin clear efs i tricked it but not help
thanks for your replies
up
use the search:
http://forum.xda-developers.com/showthread.php?t=2548933
Exactly the same case, with solution.
EDIT: my second link was wrong: it is actually a previous thread about same case.
http://forum.xda-developers.com/showthread.php?t=2546728
alete89 said:
use the search:
http://forum.xda-developers.com/showthread.php?t=2548933
http://forum.xda-developers.com/showthread.php?t=2667579
Exactly the same case, with solution.
Click to expand...
Click to collapse
Thanks God
there is a hope
but i'm sorry i can't understand this
On another device (same model and region) I did:
dd if=/dev/block/mmcblk0p2 of=/sdcard/modemfs.img.md5
Copied generated file to my sdcard and did:
dd if=/sdcard/modemfs.img.md5 of=/dev/block/mmcblk0p2
Reboot and it's done.
how i use this codes and which one i must use
and is it in terminal program ?
my baseband is oK and 3G is oK how i do that solution ?
sorry for bad english
Make all wipes including fix permissions in cwm temporaly in 4.1.2, a counter going to start after fix permissions... so extract the battery, and then flash a stock jb via odin...
Sorry for my bad english
amr diab said:
Thanks God
there is a hope
but i'm sorry i can't understand this
On another device (same model and region) I did:
dd if=/dev/block/mmcblk0p2 of=/sdcard/modemfs.img.md5
Copied generated file to my sdcard and did:
dd if=/sdcard/modemfs.img.md5 of=/dev/block/mmcblk0p2
Reboot and it's done.
how i use this codes and which one i must use
and is it in terminal program ?
my baseband is oK and 3G is oK how i do that solution ?
sorry for bad english
Click to expand...
Click to collapse
If you don't have any baseband or 3g problem the steps should be:
1)downgrade to GB 2.3.6, you can try downgrading with ODIN 1.85 with 3 files (PDA, PIT, CSC) and checking the "re-partition" option (be carefull, this will erase the "sdcard0" internal phone memory!, make a backup if you have personal stuff there). If EVERYTHING works well, (even 3g and baseband) continue to:
2) flash JB 4.1.2 stock with odin (a newer one if you have it) only with PDA (without checking re-partition!) and that should work well.
If you have back ups made with CWM or TWPR: flash your custom recovery from stock recovery and then root.
Good luck!
alete89 said:
If you don't have any baseband or 3g problem the steps should be:
1)downgrade to GB 2.3.6, you can try downgrading with ODIN 1.85 with 3 files (PDA, PIT, CSC) and checking the "re-partition" option (be carefull, this will erase the "sdcard0" internal phone memory!, make a backup if you have personal stuff there). If EVERYTHING works well, (even 3g and baseband) continue to:
2) flash JB 4.1.2 stock with odin (a newer one if you have it) only with PDA (without checking re-partition!) and that should work well.
If you have back ups made with CWM or TWPR: flash your custom recovery from stock recovery and then root.
Good luck!
Click to expand...
Click to collapse
i did these things before a lot of times and i'm now on GB and everything is fine
i ca't start jellybean any more because the wizard crashes and i tried harshjelly but came without any programs like you
but your baseband was xxxx and u solved it with the modem file and everything is ok ? am i right ?
i don't have this problem how can i fix the jellybean problem ?
amr diab said:
i did these things before a lot of times and i'm now on GB and everything is fine
i ca't start jellybean any more because the wizard crashes and i tried harshjelly but came without any programs like you
but your baseband was xxxx and u solved it with the modem file and everything is ok ? am i right ?
i don't have this problem how can i fix the jellybean problem ?
Click to expand...
Click to collapse
Well. When I had that problem I wasn't sure if wizard and baseband problem was related, but both things fixed when I replaced my modemfs with one from my friend.
If you want to try the same (at your own risk), you have to:
1) have a rooted GB (there are guides all over the internet)
2) download the file: goo.gl/DzAjza (it is from company: Claro, Argentina, UBLD1, I'm sure it is not "device specific" but I'm not sure if it is "carrier specific") and put it in your phone.
3) install any Terminal app from playstore
4) in terminal write:
"su" (to get super user privileges)
and then:
dd if=/sdcard/modemfs.img.md5 of=/dev/block/mmcblk0p2
assuming that you put the file in your sdcard. (write carefully!!! you can mess it up hard if you misstype here)
then reboot and check if everything work properly, if yes, try flashing JB with Odin again and cross fingers.
Good luck!

Help - Did I soft-brick my i9305???

Hello knowledgeable people!
I did a very stupid thing!... I took an official Samsung ROM package .tar.md5, remove the .md5 extension, extracted it, replaced boot.img with a custom kernel boot.img and re-compressed into a .tar package.
Then I took this .tar package and flashed it on the phone with Odin on my PC.
That didn't work, as expected.
The process blocked at one point.
I thought I will then just have to flash the Samsung official ROM to get everything back.
Well... not! I can flash the Samsung official ROM with Odin on my PC, but when the phone starts, it get stucked on bootloop on the glowing samsung logo.
I tried many things, including:
* wipe cache
* wipe data
but nothing worked...
At this point, I think I need to repartition/format everything and start from scratch but I don't know how to do this...
I tried to flash the Partition Identification Table kindly uploaded by @lyriquidperfection, but it didn't work (see here: http://forum.xda-developers.com/showthread.php?t=1950591) and it gets stuck in Odin as @narcarsiss mentions here: http://forum.xda-developers.com/showpost.php?p=33145970&postcount=2
Anyone has an idea?
> How to re-partition/re-format properly?
> Any other method to solve the bootloop?
Thanks for your help!
Why not to flash stock Sammy rom through Odin? This time - not modified?
Flash stock Sammy latest ROM .
Wipe everything in recovery and it should work.
I always have to wipe **** when installing official Sammy ROM.
Else it will stay at Samsung screen with flashing letters
Sent from my GT-I9305 using xda app-developers app
Hbohd said:
Why not to flash stock Sammy rom through Odin? This time - not modified?
Click to expand...
Click to collapse
This is what I tried... but it still get stuck at glowing samsung logo...
toeterbaas said:
Flash stock Sammy latest ROM .
Wipe everything in recovery and it should work.
I always have to wipe **** when installing official Sammy ROM.
Else it will stay at Samsung screen with flashing letters
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the answer.
What do you mean "wipe ****"?
Could you detail the steps?
1. Flash official sammy ROM through odin
2... enter recovery? (please confirm)
3... wipe what?
Thanks!
Have you tried flashing another kernel?Boeffla Etc then use KIES or Odin to flash back to stock
Sent from my GT-I9305 using xda app-developers app
Yes enter recovery after flashing with Odin.
When u power on hold volume up home key and power all at the same time release them when u see Samsung gt i9305 then wipe cach and wipe the other one. There are 2 wipe options.
Your phone should boot now it takes some time the first time around a minute.
Let me know if it worked
- flash stock Samsung ROM for your country with Odin
- go to recovery wipe the 2 options When u power on hold volume up home key and power all at the same time release them when u see Samsung gt i9305
-phone should boot takes a minute before he goes trough the flashing Samsung screen.
Sent from my GT-I9305 using xda app-developers app
---------- Post added at 09:51 AM ---------- Previous post was at 09:47 AM ----------
All you have to do is follow my steps.
It should work now
Sent from my GT-I9305 using xda app-developers app
Looki75 said:
Hello knowledgeable people!
I did a very stupid thing!... I took an official Samsung ROM package .tar.md5, remove the .md5 extension, extracted it, replaced boot.img with a custom kernel boot.img and re-compressed into a .tar package.
Then I took this .tar package and flashed it on the phone with Odin on my PC.
That didn't work, as expected.
The process blocked at one point.
I thought I will then just have to flash the Samsung official ROM to get everything back.
Well... not! I can flash the Samsung official ROM with Odin on my PC, but when the phone starts, it get stucked on bootloop on the glowing samsung logo.
I tried many things, including:
* wipe cache
* wipe data
but nothing worked...
At this point, I think I need to repartition/format everything and start from scratch but I don't know how to do this...
I tried to flash the Partition Identification Table kindly uploaded by @lyriquidperfection, but it didn't work (see here: http://forum.xda-developers.com/showthread.php?t=1950591) and it gets stuck in Odin as @narcarsiss mentions here: http://forum.xda-developers.com/showpost.php?p=33145970&postcount=2
Anyone has an idea?
> How to re-partition/re-format properly?
> Any other method to solve the bootloop?
Thanks for your help!
Click to expand...
Click to collapse
Tnx for the mention, but i heade bad news. I had to send my phone away to fix the issue.
This was a long time ago that this happened and better methods may of been discovered. Good luck:good:
narcarsiss said:
Tnx for the mention, but i heade bad news. I had to send my phone away to fix the issue.
This was a long time ago that this happened and better methods may of been discovered. Good luck:good:
Click to expand...
Click to collapse
Thanks for your answer!
I fear sending S3 to Samsung for repair is the only way, unfortunately... This is what I will do tomorrow (in 10hrs from now) unless a white knight arrives on this thread and gives me the golden solution!
You havent mentioned what rom version you tried.
I guess you used 4.3 official?
I could only guess but ther is probably more then just boot.img containing Knox code.
Knox is hindering users from downgrading bootloader and that maight be your problem now.
You did not mention wich version you try to recover to either.
So if you try with the old 4.1.2 it may be impossible.
Perhaps you need the newest official rom to get it working.
Sent from my GT-I9305 using XDA Premium 4 mobile app
tissot said:
You havent mentioned what rom version you tried.
I guess you used 4.3 official?
I could only guess but ther is probably more then just boot.img containing Knox code.
Knox is hindering users from downgrading bootloader and that maight be your problem now.
You did not mention wich version you try to recover to either.
So if you try with the old 4.1.2 it may be impossible.
Perhaps you need the newest official rom to get it working.
Sent from my GT-I9305 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for your answer.
The home made package was on 4.3 base.
Then I tried to reflash official 4.3.
I will give a try with 4.1.2...
Well... didn't work either... since I already had knox bootloader...
It shows "unsupported version".
Oh well...
tissot said:
You havent mentioned what rom version you tried.
I guess you used 4.3 official?
I could only guess but ther is probably more then just boot.img containing Knox code.
Knox is hindering users from downgrading bootloader and that maight be your problem now.
You did not mention wich version you try to recover to either.
So if you try with the old 4.1.2 it may be impossible.
Perhaps you need the newest official rom to get it working.
Sent from my GT-I9305 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You can't flash the old version. Odin will revert it back while installing.
Sent from my GT-I9305 using xda app-developers app
Looki75 said:
Thanks for your answer.
The home made package was on 4.3 base.
Then I tried to reflash official 4.3.
I will give a try with 4.1.2...
Click to expand...
Click to collapse
Okey
A bit far feched but is it possible your download is broken? Try DL again.
And either it is or not you could try installing 4.3 from different region as yours. Just to try every possability.
It shouldnt be impossible to fix this stupid phone
You dont have any nandroid backup some where.
Last option. Throw it on a brick wall to release som aggrevation and then you buy a Nexus 5. Problem solved.
Sent from my GT-I9305 using XDA Premium 4 mobile app
tissot said:
Okey
A bit far feched but is it possible your download is broken? Try DL again.
And either it is or not you could try installing 4.3 from different region as yours. Just to try every possability.
It shouldnt be impossible to fix this stupid phone
You dont have any nandroid backup some where.
Last option. Throw it on a brick wall to release som aggrevation and then you buy a Nexus 5. Problem solved.
Sent from my GT-I9305 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You made me laugh!
Seriously: DL is OK (I flashed this very official ROM many times in the past) and I do have a nandroid, but result is the same (stuck at glowing samsung logo).
The issue is way deeper.
Thanks for your help! Before trying the brick wall, I will try to make it repaired by Samsung!
Looki75 said:
You made me laugh!
Seriously: DL is OK (I flashed this very official ROM many times in the past) and I do have a nandroid, but result is the same (stuck at glowing samsung logo).
The issue is way deeper.
Thanks for your help! Before trying the brick wall, I will try to make it repaired by Samsung!
Click to expand...
Click to collapse
I had a brick once, butthe situation was a bit different. I have knox bootloader and tried to downgrade to a 4.1.2 rom without the bootloader package. The flash went ok, but my phone was stucked on Samsung Galaxy S3 GT-I9305 screen. After that, i was quite desperate and tried to reflash stock 4.3 via odin, but it failed :S
Then i tried to flash official Germany's 4.3 again, this time with the ODIN version inside CF-Root package (http://download.chainfire.eu/232/CF-Root1/CF-Auto-Root-m3-m3zh-gti9305.zip?retrieve_file=1), put the cable in another USB port, killed every kies proccess and rebooted phone in dowwnload mode. This time the flash went ok, i rebooted the phone into recovery (got bootloop) and wipe cache and factory reset. After this the phone booted up normally. Hope you can fix your phone
shucrut said:
I had a brick once, butthe situation was a bit different. I have knox bootloader and tried to downgrade to a 4.1.2 rom without the bootloader package. The flash went ok, but my phone was stucked on Samsung Galaxy S3 GT-I9305 screen. After that, i was quite desperate and tried to reflash stock 4.3 via odin, but it failed :S
Then i tried to flash official Germany's 4.3 again, this time with the ODIN version inside CF-Root package (http://download.chainfire.eu/232/CF-Root1/CF-Auto-Root-m3-m3zh-gti9305.zip?retrieve_file=1), put the cable in another USB port, killed every kies proccess and rebooted phone in dowwnload mode. This time the flash went ok, i rebooted the phone into recovery (got bootloop) and wipe cache and factory reset. After this the phone booted up normally. Hope you can fix your phone
Click to expand...
Click to collapse
Thanks! Any idea is valuable!
How did you create the ball pack of "4.1.2 rom without the bootloader" - in other words: how did you remove the bootloader from there?
Looki75 said:
Thanks! Any idea is valuable!
How did you create the ball pack of "4.1.2 rom without the bootloader" - in other words: how did you remove the bootloader from there?
Click to expand...
Click to collapse
I'd used this tutotial (just the part of commands, added everything that the original ".md5" has, removing just the "sboot.img", i'm not 100% sure if this is the only file to be off the new package, as i said, didnt work for me ), the only difference is that i'm using cygwin instead of linux itself, it worked like a charm
Basically all u need to do is unpack a original .md5 firmware (use winrar or so) and move the files (except sboot.img) to your home directory of linux or, in my case, cygwin (originally C:\cygwin\home\user-name), start the console and type the command bellow, switching the ".imgs" to match yours, of course:
Code:
cd $HOME
tar -H ustar -c image_1 image_2 > your_odin_package.tar
After this you must have a 1Gb+ .tar file (considering you will make a stock samsung flashable), now you will add md5 checksum to that, just to avoid troubles:
Code:
md5sum -t your_odin_package.tar >> your_odin_package.tar
mv your_odin_package.tar your_odin_package.tar.md5
and voilĂ , you have your flashable odin package. Of course you can try making one with just the system.img, boot.img and modem.img. If the phone boots up, do a factory reset. I have no idea if this will work in any occasion having knox bootloader trying to flash official 4.1.x, but you can also try with a samsung 4.3 rom.
In the last scenario, try to CF auto-root your phone, then flash an official CWM recovery via odin using this method i told u, boot into recovery and flash a custom rom, do a factory reset and wiping cache and dalvik cache. I hope one of the options work for you.
I'd recommend trying to flash a custom recovery and then a custom rom. If phone boots up and is functional, try to flash samsung official 4.3 again (if your desire is having the stock of course), not forgeting to factory reset via cwm first to avoid troubles.
Been in maybe like pratically the same situation
1st flash philz touch recovery ( install latest version)
2nd backup ur efs in external sd and copy it to a pc just in case (important if u mess up imei )
3rd Copy and rom in the external sd
4th Wipe data,cache,dilvik
5th In mount and storage Format everything except external sd ( u can backup ur internal sd card with 3rd step)
6th Flash Rom and reboot
7th If no imei then try a newer modem
http://forum.xda-developers.com/showthread.php?t=2572432
http://forum.xda-developers.com/showthread.php?t=2607279
Notice I only could get to run 4.3 to run after formating everything through philz touch recovery

[Q] need urgent help! bricked it

hey eveyone!
my device is galaxy s advance gt-i9070 on which i was using cutom rom aicp 3.5 nightly (4.4.2 kitkat) with minor bugs and cwm recovery 6.0.4.7
i decided to switch to paranoid android 3.69 for smoother perfomance but sadly i bricked my device. although i had backed up my rom using cwm recovery on sd card. but the most sad part is that even recovery is not working. it just reboots again and again. someone told me to flash stock firmware via odin as the download mode is working. but i am worried that my data will be lost. can anyone tell me my data will be lost or not????
and if it ll lost than any way to save it or recover it/ ? i had extremely precious data in it. but being careless i didnt backed my personal data in my laptop.. please help me guys.. ready to pay any cost for my data
shivamgaba22 said:
hey eveyone!
my device is galaxy s advance gt-i9070 on which i was using cutom rom aicp 3.5 nightly (4.4.2 kitkat) with minor bugs and cwm recovery 6.0.4.7
i decided to switch to paranoid android 3.69 for smoother perfomance but sadly i bricked my device. although i had backed up my rom using cwm recovery on sd card. but the most sad part is that even recovery is not working. it just reboots again and again. someone told me to flash stock firmware via odin as the download mode is working. but i am worried that my data will be lost. can anyone tell me my data will be lost or not????
and if it ll lost than any way to save it or recover it/ ? i had extremely precious data in it. but being careless i didnt backed my personal data in my laptop.. please help me guys.. ready to pay any cost for my data
Click to expand...
Click to collapse
Flashing stock firmware with Odin will not delete your data from SD card. You will probably need to do factory reset, it will delete your contacts, sms, apps... But stuff from internal and external sd will remain there.
You bricked it because 4.4.2 uses preload partition for a swap, and it is partitioned in different way. And on PA 3.69 is probably different.
Or ROM zip of PA was corrupted.
thankyou and one more question
shut_down said:
Flashing stock firmware with Odin will not delete your data from SD card. You will probably need to do factory reset, it will delete your contacts, sms, apps... But stuff from internal and external sd will remain there.
You bricked it because 4.4.2 uses preload partition for a swap, and it is partitioned in different way. And on PA 3.69 is probably different.
Or ROM zip of PA was corrupted.
Click to expand...
Click to collapse
thanx a lot buddy now i can flash it being tension free. but can you tell me the way to flash PA without bricking /????
shivamgaba22 said:
thanx a lot buddy now i can flash it being tension free. but can you tell me the way to flash PA without bricking /????
Click to expand...
Click to collapse
I did not use that version that you used. I think that you will not have a problem when you install it over stock, I explained you why you had problem when you did it over CM11.
Sent from my GT-I9070 using Tapatalk
Thanx a lot
Everything fine now with all data restored..
Once again thnx buddy
Sent from my GT-I9070 using XDA Premium 4 mobile app
Hi
I 've bricked my phone as i was trying to clear cache 'n partition of my rooted phone. I assume it must have cleared the software as well.
i'm trying to flash it via odin but it is showin FAIL. i'm putting a pda .md5 file from sammobile 'n it's still not working. pl help.
Neo2803 said:
Hi
I 've bricked my phone as i was trying to clear cache 'n partition of my rooted phone. I assume it must have cleared the software as well.
i'm trying to flash it via odin but it is showin FAIL. i'm putting a pda .md5 file from sammobile 'n it's still not working. pl help.
Click to expand...
Click to collapse
You can't brick phone with clearing cache. Did you wipe system partition? Try to install same ROM that you had (if you had).
Give us a screenshot of Odin fail. What exactly happen. And what is the full name of md5 that you put in pda of Odin. Try different version of Odin too.
shut_down said:
You can't brick phone with clearing cache. Did you wipe system partition? Try to install same ROM that you had (if you had).
Give us a screenshot of Odin fail. What exactly happen. And what is the full name of md5 that you put in pda of Odin. Try different version of Odin too.
Click to expand...
Click to collapse
Yes, i did wipe system partition. Should i have not done that ???????/
Name of md5 - I9070DDULP8_I9070ODDULP8_HOME.tar.md5 .. Can you suggest another one ?
I did have a ROM named light JB which i found here only. Its location showthread.php?t=2244441.
pl guide future course of action.
TIA.
Neo2803 said:
Yes, i did wipe system partition. Should i have not done that ???????/
Name of md5 - I9070DDULP8_I9070ODDULP8_HOME.tar.md5 .. Can you suggest another one ?
I did have a ROM named light JB which i found here only. Its location showthread.php?t=2244441.
pl guide future course of action.
TIA.
Click to expand...
Click to collapse
Go back to recovery, and if you have ROMs zip install it again.
Ofcourse you shouldn't wipe system partition, system files are there...
And if you can't install ROM again, what error do you get in Odin?
shut_down said:
Go back to recovery, and if you have ROMs zip install it again.
Ofcourse you shouldn't wipe system partition, system files are there...
And if you can't install ROM again, what error do you get in Odin?
Click to expand...
Click to collapse
I didn't think twice before wiping it. My bad.
Anyways, That's the issue. I can't go to recovery. Phone only shows the odin mode (if i press VOL. DOWN+HOME+POWER).
Odin simply says FAILS.
Neo2803 said:
I didn't think twice before wiping it. My bad.
Anyways, That's the issue. I can't go to recovery. Phone only shows the odin mode (if i press VOL. DOWN+HOME+POWER).
Odin simply says FAILS.
Click to expand...
Click to collapse
Well then you did not just wipe system, you installed some GB based ROM over?
You have log window in Odin, where it fails? Try to redownlaod firmware again, and then install again.
What version of Odin do you use? Try 3.x.
shut_down said:
Well then you did not just wipe system, you installed some GB based ROM over?
You have log window in Odin, where it fails? Try to redownlaod firmware again, and then install again.
What version of Odin do you use? Try 3.x.
Click to expand...
Click to collapse
Odin Version - 3.07
I'm not sure it s GB based ROM and neither if it's JB. Can you take some more pain 'n send me a proper link ? please.
My older custom ROM is http://forum.xda-developers.com/showthread.php?t=2244441 - http://d-h.st/vge
Neo2803 said:
Odin Version - 3.07
I'm not sure it s GB based ROM and neither if it's JB. Can you take some more pain 'n send me a proper link ? please.
Click to expand...
Click to collapse
But it should be the same:
http://terafile.co/222154239129/INU-I9070DDULP8-20130412134604.zip
http://rapidgator.net/file/0a25225062db04ba2c8216cca12972d2
Check the file zize of zip when you download it, it should be 425MB.
shut_down said:
But it should be the same:
http://terafile.co/222154239129/INU-I9070DDULP8-20130412134604.zip
http://rapidgator.net/file/0a25225062db04ba2c8216cca12972d2
Check the file zize of zip when you download it, it should be 425MB.
Click to expand...
Click to collapse
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Neo2803 said:
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Click to expand...
Click to collapse
ROM is fine. And you was on GB or JB before? If you was on GB then this problem you got is normal. You must be on JB (flash JB firmware) if you install JB ROM.
And again, if you get FAIL on Odin DO A SCREENSHOT AND POST IT HERE. To see what cause that fail. Left part of this screenshot is a log http://4.bp.blogspot.com/-gkWcapOu2...gingerbread+s5570jpq8+samsung+galaxy+Mini.jpg
Blue, where it says Message.
This is for other phone, do not pay attention on that, I just told you what I need to see.
---------- Post added at 11:28 AM ---------- Previous post was at 11:02 AM ----------
Neo2803 said:
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Click to expand...
Click to collapse
And no, you must install Firmware not, not ROM. Because you probably installed JB ROM over GB. That is why you do not have working recovery.
Finally unbricked !!!
shut_down said:
ROM is fine. And you was on GB or JB before? If you was on GB then this problem you got is normal. You must be on JB (flash JB firmware) if you install JB ROM.
[/COLOR]
And no, you must install Firmware not, not ROM. Because you probably installed JB ROM over GB. That is why you do not have working recovery.
Click to expand...
Click to collapse
Finallyyyyyyy !!! yipppieee !!! I'm able to flash my phone with a JB Firmware. I shall be more careful in future.
http://i.imgur.com/UMv2kgs.png
http://i.imgur.com/WPP6yqs.png?1
Thanks a tonnnnn shut_down :good:: God bless you.

Categories

Resources