Hi,
I tried to install cm-10.1.2-otter2 following this instruction: http://forum.xda-developers.com/showthread.php?t=2271909
The current status is that I am able to boot into TWRP 2.6.0.0 without any problem. That means that the Kindle logo turns blue and I can enter TWRP.
My problem is now that I can not go anywhere else now.
When I try to install CM I'll get the following error message:
assert failed: getprop("ro.product.device") == "blaze_tablet" || getprop("ro.bui
getprop("ro.product,device") == "otter2" || getprop("ro.build.product") =
E: Error executing updater binary in zip '/sdcard/cm-10.1.2-otter2.zip'
Click to expand...
Click to collapse
My problem is that I can't do anything else now as I can only enter TWRP and do more or less nothing there.
I can't access the storage anymore when connecting it to the computer as it will not be identified anymore.
So what options do I have now?
Thanks a lot for your help!
Kind Regards,
Chewie
Have you tried putting twrp into sideload mode? Its under the advanced section. Unless you misposted this in the 7 inch section, that ROM was designed for kf2, that's might be why you are having problems. After you get sideload mode enabled if your PC detects it and u manage to install the adb drivers, u put the correct zip you want to flash in the same directory as adb and I think the syntax goes as follows:
adb sideload filename.zip
See if that helps.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Have you tried putting twrp into sideload mode? Its under the advanced section. Unless you misposted this in the 7 inch section, that ROM was designed for kf2, that's might be why you are having problems. After you get sideload mode enabled if your PC detects it and u manage to install the adb drivers, u put the correct zip you want to flash in the same directory as adb and I think the syntax goes as follows:
adb sideload filename.zip
See if that helps.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Thanks for the quick reply.
I tried that one, too. Unfortunately Windows will is not accepting the device anymore as Kindle (which worked well before) and ADB is showing offline / no device on the PC.
The connected Kindle says "Starting ADB sideload feature..."
And you are correct - it seems to be a wrong ROM but happily it could not been installed.
So the main problem is now to get the new suitable ROM from the computer to the Kindle device.
Reinstalling drivers is not helping, too. So I am kind of clueless how to get files to the Kindle.
Have a nice evening .
Update 21:45h:
It seems to work now on another computer. Thanks again for your answer which pointed me into the right direction and forced me to try the correct way on different devices. The CyanogenMod logo is now on the display of the Kindle. I'll let you know how it end
Update 09:00h:
After some more tries it is finally working as intended. I am not sure which was the original mistake. Maybe driver issues on the PC. Thanks again!
I sideloaded CM 10.1 via TWRP 2.6.3.1 and comes up fine (can't tether, but that's another issue). I rebooted into recovery, and when I attempt sideload, I get error: closed. Every time. Have tried everything. Anything I'm missing? Thanks in advance.
C:\Users\tecg\Desktop\ADB\adt-bundle-windows-x86-20131030\sdk\platform-tools>adb
usb
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
restarting in USB mode
C:\Users\tecg\Desktop\ADB\adt-bundle-windows-x86-20131030\sdk\platform-tools>adb
devices
List of devices attached
0123456789ABCDEF sideload
C:\Users\tecg\Desktop\ADB\adt-bundle-windows-x86-20131030\sdk\platform-tools>adb
push wifi_tether_v3_3-beta2.apk /sdcard
error: closed
C:\Users\tecg\Desktop\ADB\adt-bundle-windows-x86-20131030\sdk\platform-tools>
Add another / at the end of /sdcard so it looks like this:
Code:
adb push filename /sdcard/
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
I realize there are dozens of similar threads but none so far has helped. I'll keep looking but in the mean time I thought I would try asking for advice.
I screwed up somehow attempting to root my Kindle HD 7". It was stuck in a loop returning to the "restore factory" screen w/ orange triangle every time. I bought a factory cable and the kindle is now in Fasboot mode.
However, every set of instructions I can find to take the next step of restoring the original firmware requires adb and/or fastboot to recognize the kindle. I cannot figure out how to get that to happen. Both fail to recognize it. I modified my adb_usb.ini file to add the line 0x1949 and I modified
sdk\extras\google\usb_driver\android_winusb.inf file to have the required hardware ids for the kindle (I tried the "stock" ids as well as the ids currently listed for the tablet in device manager). I added the sdk paths to my environmental variables. adb & fastboot commands work but neither finds the kindle.
Windows Vista is recognizing the kindle HD as Other Devices > Tate-PVT-08 but fails to load any drivers when it is first found (I get an error).
Any ideas?
Edit/update: I found a thread explaining how to force Windows to change the drivers. I forced it to change to the Android Sooner Composite ADB Driver and it is now listed as an ADB Interface device. still not recognized in adb though.
Another thing is that I am unable to update the drivers to use the adb kindle drivers. Windows simply reports that it "could not find driver software for your device".
Try the drivers in my SIG, they might do what yours already did though and not show up, but they should work if you update the driver to them. I am not a fan of vista, but I can think of several reason why u could be having issues offhand, like uac or driver signature enforcement, I believe driver signature enforcement was on vista, not positive though. Anyways try out my drivers and if that doesn't work maybe the command prompt isn't running with admin privis.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Your drivers were recognized and installed by Vista! Windows now sees it as an Android Phone > Android ADB Interface. Still no luck getting adb to find the kindle though. I think next I'm going to try deleting/uninstalling adb & the sdk and starting again. It isn't spelled out anywhere but I half suspect the paths are wrong somehow.
I can update to Windows 7 if there is any chance that would help.
Thanks for your help!
Michael
stunts513 said:
Try the drivers in my SIG, they might do what yours already did though and not show up, but they should work if you update the driver to them. I am not a fan of vista, but I can think of several reason why u could be having issues offhand, like uac or driver signature enforcement, I believe driver signature enforcement was on vista, not positive though. Anyways try out my drivers and if that doesn't work maybe the command prompt isn't running with admin privis.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Your device is listed as a Tate device correct? That is not going to work with adb because that means it is in fastboot. You can't use adb commands with fastboot. Try running "fastboot -i 0x1949 getvar product" and see if it reports anything back.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Yes, if I uninstall the device and let Windows Vista find it, it is listed as a Tate device. My kindle is indeed in fastboot (I have a factory cable). If I manually force it to switch drivers I can have windows list it as a ADB interface device.
Ahh, I tried fastboot -i 0x1949 getvar product and I get a response from the kindle!
So...I guess on to the next step! One of these 40 tabs I have open probably has something on flashing the rom.
Thanks all!
Michael
stunts513 said:
Your device is listed as a Tate device correct? That is not going to work with adb because that means it is in fastboot. You can't use adb commands with fastboot. Try running "fastboot -i 0x1949 getvar product" and see if it reports anything back.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
MichaelBrock said:
I realize there are dozens of similar threads but none so far has helped. I'll keep looking but in the mean time I thought I would try asking for advice.
I screwed up somehow attempting to root my Kindle HD 7". It was stuck in a loop returning to the "restore factory" screen w/ orange triangle every time.
Click to expand...
Click to collapse
I know this is an old thread, but it seems to be the one most relevant to my problem.
I've got pretty much the same issue, but its because i was trying to install chainfire on my rooted kindle fire hd 7 (tate). Installation was taking longer than expected, actually thought my kindle had frozen so did a hard reset....big mistake as now it doesn't load past the kindle fire logo screen.
I bought a factory cable and the kindle is now in Fasboot mode.
Click to expand...
Click to collapse
Done the same, but when in fastboot, nothing.
However, every set of instructions I can find to take the next step of restoring the original firmware requires adb and/or fastboot to recognize the kindle. I cannot figure out how to get that to happen. Both fail to recognize it. I modified my adb_usb.ini file to add the line 0x1949 and I modified
sdk\extras\google\usb_driver\android_winusb.inf file to have the required hardware ids for the kindle (I tried the "stock" ids as well as the ids currently listed for the tablet in device manager). I added the sdk paths to my environmental variables. adb & fastboot commands work but neither finds the kindle.
Windows Vista is recognizing the kindle HD as Other Devices > Tate-PVT-08 but fails to load any drivers when it is first found (I get an error).
Any ideas?
Click to expand...
Click to collapse
This is pretty much where i'm at now, except on a windows 8 laptop, tried uninstalling everything related to my kindle, all adb, fastboot and sdk etc from my laptop before reinstalling and trying to update drivers but still not being recognised, did all the same things as above post, as been trying to sort this off and on for a while.
stunts513 said:
Try the drivers in my SIG, they might do what yours already did though and not show up, but they should work if you update the driver to them. I am not a fan of vista, but I can think of several reason why u could be having issues offhand, like uac or driver signature enforcement, I believe driver signature enforcement was on vista, not positive though. Anyways try out my drivers and if that doesn't work maybe the command prompt isn't running with admin privis.
Click to expand...
Click to collapse
I've tried to install the drivers from your sig but keep getting the message "the hash for this file is not present in the specified catalog file, the file is likely corrupt or been the victim of tampering" so i'm at a bit of a stand still at the minute.
stunts513 said:
Your device is listed as a Tate device correct? That is not going to work with adb because that means it is in fastboot. You can't use adb commands with fastboot. Try running "fastboot -i 0x1949 getvar product" and see if it reports anything back.
Click to expand...
Click to collapse
Any command i try use through fastboot just gives the <waiting for device> message with no response from my kindle. If either of you (or anyone else who reads this) can help it would be greatly appreciated.
EDIT: Got it recognised by windows finally, I opened "device manager", clicked "update driver software", "browse my computer for driver software" then "let me pick from a list of device drivers on my computer" where i found the right driver to enable fastboot to work and windows to recognise my tablet. Now to fix the damn thing.
Having same issue where my kindle isn't found in fastboot for some reason. When I type
Code:
fastboot -i 0x1949 getvar product
I get back Tate-PVT-08, but when i do fastboot devices I get nothing. I have Andoid ADB drivers installed and a factory cable. What is the problem?
Edit: Turns out i had to paste this in before everything -i 0x1949.
I'm glad this is a current topic again. I also need help. I've been running my rooted Kindle Fire HD 3d Gen going on two years now. I was using the firerooter to get it updated to 4.5.5 today and I'm pretty sure I bricked it--again. But this time I think I bricked it up real good.
I was doing this to hopefully get a recently updated game working again. But when it got hung up I freaked out for a second and made a mistake... I went ahead with a factory reset but then I realized that this would delete my game progress and I hadn't made a game backup before the update came on today so I was pretty much screwed in several ways.
Right, so when I was in the middle of the factory reset I was like... "****! I don't want to lose all my game progress!" and I immediately powered it down. And I immediately punched myself in the face after I turned it on and it did the lovely "kindle_fire" grey-scale initial load screen loop over and over. Based on what I've read, I'm pretty sure I've corrupted the bootloader or possibly deleted some boot partition.
I'm about sick of Amazon's bull****. They don't manager this part of their business very well at all. /RAGE
But before I throw this garbage in the dump where it belongs... I'm tempted to try to get this thing working.
I have a fastboot cable and some time. I can get to the fastboot info such as "fastboot -i 0x1949 getvar product" and it returns "product: Soho-PVT-Prod-07" . But, I can't get anything out of the adb commands to recognize the device. I've updated the .ini files from the android SDK.
Is there any boot partition I can load to this thing? Some way to hack into this? thx for any help
Hi all,
I'm new here, and I've been trying for the past few hours to root my Kindle Fire HD 7" so I can install a CM10.1 ROM and turn it into a google tablet. I've been searching the web for information, and I kept getting directed here so I decided I might as well join.
Anyway it seems the one method that works is the Bin4ry one, and I started following the instructions given on this site and others. However when I installed the driver, it said the installation was successful but when I clicked "Finish" a window popped up and told me the driver didn't install properly. Then I tried to execute the "Run Me" file, but it gave me this:
"Please connect device with enabled USB-debugging to your computer.
the system cannot find the path specified
doing a backup first, please confirm this on your device
the system cannot find the path specified
Done!"
Nothing happens on the Kindle Fire. But I checked the Device Manager, after I downloaded and installed a driver linked in a thread on this forum, it said the Kindle was USB-enabled interface. Anyone have any idea what the problem is, here? Thanks
Ok did you enable usb-debugging in the kindle's security settings? If you have try opening a command prompt and CD into the directory of the adb command in binary's root tool, run adb devices and see if the kindle is listed.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Ok did you enable usb-debugging in the kindle's security settings? If you have try opening a command prompt and CD into the directory of the adb command in binary's root tool, run adb devices and see if the kindle is listed.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Yep, USB-debugging is enabled. It's the same thing as enabling ADB, right? This is what I've done thus far. I'm running Windows 8, so I've disabled driver signature enforcement, and also installed the drivers. I've checked Device Manager---the system has recognized the Kindle as a Google Android ADB interface, and if I check adb devices in cmd prompt, the serial number of my Kindle is listed. Also created an adb_usb.ini file according to these instructions:
"open adb_usb.ini with notepad
(add on one line each!)
0x1949
0x006
save file."
The problem now is not that nothing happens on the Kindle when I run the root tool, I do get the option to restore data but it prompts me to enter a data encryption password. I researched this and a techleopard article said to enter my Amazon password, which I did but nothing happens. The data restore options (Restore or Do Not Restore) just grey out and the root tool just says "Running" for ever and ever. Tried some other root tools such as Quemp and Kindle Fire Utility, but neither worked and besides the more recent information I've seen have Bin4ry's as the only one that works on 7.4.6 which is the OS I am using.
EDIT: Okay, tried it again and for some reason this time the root tool ran successfully. I did a power reset, and ran a RootChecker, and it says it's rooted but I can't find the SuperUser app (the checker also could not find it). Was the root still successful?
Probably though I am throwing a guess that only the such binary is installed, look in the /system/xbin folder and see if the such binary is there, if you want to to retry the process just delete that file. I was going to mention the encryption password is whatever your lock screen code is set to.
BTW don't ever use kfu to try to root your kindle, it will hard brick it. Its designed only for kf1's.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Probably though I am throwing a guess that only the such binary is installed, look in the /system/xbin folder and see if the such binary is there, if you want to to retry the process just delete that file. I was going to mention the encryption password is whatever your lock screen code is set to.
BTW don't ever use kfu to try to root your kindle, it will hard brick it. Its designed only for kf1's.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Heh, actually after a LOT of messing around, and perusing several articles across the web and on xda, I've got it working. KFU didn't brick anything, just didn't work. My only regret is that I now can't access the HD quality movies I'd bought from Amazon because Amazon only allows downloading to the Kindle and the Kindle only, and my internet isn't fast enough to stream HD.
I've tried a bunch of tutorials on here to fix this, but can't figure it out.
I was on my Kindle HD 8.9" running CyanogenMod 10.1, which it has for a year. Suddenly, I got some popup last night. It said there was a nightly build update in my notifications area, so I just clicked "OK" and let it do its thing. It installed for a little bit, all was okay... but now I cannot access my Android OS.
I went to turn my Kindle on after the update, but it keeps going to TWRP. What will happen exactly is it starts... orange letters... then blue letters... then restarts again to orange letters... then blue letters... then TWRP. Why does it keep going to TWRP? How do I fix this?
My Kindle can't even connect to the PC. I just either get "Unknown Device" or "Kindle" in my Device Manager, and mounting from TWRP does nothing.
Then I try installing the Android SDK to get the ADB on my machine, and I added the "Path" in my environment to the two tools folders, but nothing... same thing happens. Constant loop into TWRP. Driving me nuts.
The update it wanted me to install when I could still get into the Android OS was cm-11-20140420-NIGHTLY-jem. I thought maybe trying to connect my Kindle to my PC in order to open the drive, then pasting the cm-11-20140420-NIGHTLY-jem into a folder and installing again from TWRP would solve my problem, but I can't even get that far.
I'm at a loss. Please help.
GogoplataMMA said:
I've tried a bunch of tutorials on here to fix this, but can't figure it out.
I was on my Kindle HD 8.9" running CyanogenMod 10.1, which it has for a year. Suddenly, I got some popup last night. It said there was a nightly build update in my notifications area, so I just clicked "OK" and let it do its thing. It installed for a little bit, all was okay... but now I cannot access my Android OS.
I went to turn my Kindle on after the update, but it keeps going to TWRP. What will happen exactly is it starts... orange letters... then blue letters... then restarts again to orange letters... then blue letters... then TWRP. Why does it keep going to TWRP? How do I fix this?
My Kindle can't even connect to the PC. I just either get "Unknown Device" or "Kindle" in my Device Manager, and mounting from TWRP does nothing.
Then I try installing the Android SDK to get the ADB on my machine, and I added the "Path" in my environment to the two tools folders, but nothing... same thing happens. Constant loop into TWRP. Driving me nuts.
The update it wanted me to install when I could still get into the Android OS was cm-11-20140420-NIGHTLY-jem. I thought maybe trying to connect my Kindle to my PC in order to open the drive, then pasting the cm-11-20140420-NIGHTLY-jem into a folder and installing again from TWRP would solve my problem, but I can't even get that far.
I'm at a loss. Please help.
Click to expand...
Click to collapse
boot into twrp, check what version of twrp you have. Then you may need to update your twrp to be cm 11 compatible if its not at latest version, current version is like 2.7.0.0(least it is for the 7", havnet check to see if that builds out for 8.9 as well), anyways check the device manager for a device with a yellow triangle next it, if you don't see that and you do have a adb interface showing up but adb doesnt detect it then uninstall the adb device and mtp device and search for devices, if it still doesnt work look for a component device with a vid of 1949 in the properties>details>hardware id's section, if you find it then remove it and scan for device. Windows is a pain in terms of drivers for the kindle in different modes. Once adb is working its as simple as pushing the rom with adb push. You may need to factory reset and/or wipe internal storage so i recommend backing up the data, i would assume the current bootloop has something to do with either no factory reset before going to cm 11 or selinux issues, but that would mean the kernel didnt flash in the ota which would be weird.
stunts513 said:
boot into twrp, check what version of twrp you have. Then you may need to update your twrp to be cm 11 compatible if its not at latest version, current version is like 2.7.0.0(least it is for the 7", havnet check to see if that builds out for 8.9 as well), anyways check the device manager for a device with a yellow triangle next it, if you don't see that and you do have a adb interface showing up but adb doesnt detect it then uninstall the adb device and mtp device and search for devices, if it still doesnt work look for a component device with a vid of 1949 in the properties>details>hardware id's section, if you find it then remove it and scan for device. Windows is a pain in terms of drivers for the kindle in different modes. Once adb is working its as simple as pushing the rom with adb push. You may need to factory reset and/or wipe internal storage so i recommend backing up the data, i would assume the current bootloop has something to do with either no factory reset before going to cm 11 or selinux issues, but that would mean the kernel didnt flash in the ota which would be weird.
Click to expand...
Click to collapse
Now I'm all screwed up. Before I saw this message, I restored my Kindle back to when it was still running the factory default OS with root, then I shut it down to enter TWRP, and it appeared on its own, but it was installing some sort of update... and when the Kindle's factory default OS appeared, my root was gone. Now I am stuck on the factory default Kindle HD 8.9" on System Version 8.4.8. Man, I should have never accepted that update and just left it as it was. Ugh. Well, for right now, there's an entry in my Device Manager that says "Kindle Fire" and when you click the arrow to bring down the submenu, it says "Android ADB Interface." The Kindle is now working when connected through USB. Now... how do I go about rooting this thing and getting TWRP on it again, because it seems the entire thing got erased. Not having my ROM installed on this thing makes it mostly useless to me.
Root with kffa or binary's root, think the newest version has different choices than the tutorial, use the old normal method. Last I checked it worked.
Sent from my Amazon Kindle Fire HD using Tapatalk
stunts513 said:
Root with kffa or binary's root, think the newest version has different choices than the tutorial, use the old normal method. Last I checked it worked.
Sent from my Amazon Kindle Fire HD using Tapatalk
Click to expand...
Click to collapse
I can't find anything. Download links are dead for KFFA. You have a link to get it through another source?
They are up and running when I click em. You were on this thread right?: http://forum.xda-developers.com/showthread.php?t=2096888
If that doesn't work you can always use binary's root.
http://forum.xda-developers.com/showthread.php?t=1886460
Use the old normal method if I remember correctly.
Sent from my Amazon Kindle Fire HD using Tapatalk
Nah, the link is dead here. Says the file was removed. There are other members in the forum asking as well for a new link.
I managed to get ADB working, and in Device Manager, I have "Android Device -> Android Composite ADB Interface."
I open CMD and type "ADB" and it scrolls a bunch of stuff, but when I type "ADB Devices" I get a list with nothing there. It's just blank.
I tried using BIN4RY Revision 33, using Option #1, but it just keeps bringing me to a "Path not Found" error of some sort.
It looks like all I need to manage to do now is get ADB to list my Kindle device before attempting the ROOT, but how can I do that?
I still wanna give KFFA a try, but no downloads anywhere, and I don't trust random 4Share and the likes, not that it's gonna fix my problem.
I'm close... I just need this damn ADB to list my Kindle device and I think I'll be okay.
Also, I want to say thanks for the help you've given me so far. It's greatly appreciated. :highfive:
C:\Program Files (x86)\Android\android-sdk\platform-tools>adb devices
List of devices attached
C:\Program Files (x86)\Android\android-sdk\platform-tools>adb kill-server
C:\Program Files (x86)\Android\android-sdk\platform-tools>adb start-server
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
C:\Program Files (x86)\Android\android-sdk\platform-tools>adb devices
List of devices attached
C:\Program Files (x86)\Android\android-sdk\platform-tools>
Click to expand...
Click to collapse
i.imgur.com/gZrrqXm.jpg
No problem, i like helping people fix things.
Try uninstalling the device and letting it search for new hardware. This is more than likely a driver issue.
Sent from my Amazon Kindle Fire HD using Tapatalk
stunts513 said:
No problem, i like helping people fix things.
Try uninstalling the device and letting it search for new hardware. This is more than likely a driver issue.
Sent from my Amazon Kindle Fire HD using Tapatalk
Click to expand...
Click to collapse
Oh, believe me. I tried that like 50 times. I think I'm just gonna make a virtual machine of Win7, completely clean install without all my drivers everywhere, and try my luck there.
GogoplataMMA said:
Oh, believe me. I tried that like 50 times. I think I'm just gonna make a virtual machine of Win7, completely clean install without all my drivers everywhere, and try my luck there.
Click to expand...
Click to collapse
From the administrator profile on your PC open a command prompt and type Bcdedit.exe -set TESTSIGNING ON then hit enter. Now restart your computer. This will disable Windows driver security enforcement. Then try to install the drivers in the device manager.
Sent from my Nexus 7 Flo running CM 11 4.4.2 with ElementalX Kernel using XDA Premium 4 mobile app
LinearEquation said:
From the administrator profile on your PC open a command prompt and type Bcdedit.exe -set TESTSIGNING ON then hit enter. Now restart your computer. This will disable Windows driver security enforcement. Then try to install the drivers in the device manager.
Sent from my Nexus 7 Flo running CM 11 4.4.2 with ElementalX Kernel using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Unfortunately, that didn't work. I'm pretty sure one or more of my drivers are interfering with the connection to the Kindle, but this is such an old OS with so many drivers, it's hard to tell.
Right now, I have a Virtual Machine of Windows 7 up. I plugged my Kindle in and I can instantly see it. I can even enter the internal storage! I'm currently installing the Android SDK for the ADB after installing the Java SE x86 version. Once I get ADB on it, I'll see if it lists my device now. Seems promising since the VM sees and allows me to already enter the internal storage, unlike my original Win7 OS.
EDIT #1: Great news! ADB now lists my device! Thing is... Root with Bin4ry Revision 33 does not seem to want to work. This is what I get...
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry (thanks to Goroh_kun and tkymgr for the idea) =
= Idea for Tablet S from Fi01_IS01 =
= (14.12.2013) v33 =
======================================================================
Device type:
0) Xperia Root by cubeundcube
1) New Standard-Root (thx Ariel Berkman)
2) New Xperia Root by Goroh_kun (Xperia Z, Xperia V [JellyBean] ...)
3) Old
4) Old-Special (for example: Sony Tablet S, Medion Lifetab)
G) Google Glass Mode (thx Saurik for the ab file)
x) Unroot
Make a choice: 1
Please connect Device with enabled USB-Debugging to your Computer
The system cannot find the path specified.
Doing a Backup first, please confirm this on your device!
The system cannot find the path specified.
Done!
Press any key to continue . . .
Click to expand...
Click to collapse
It doesn't give me a chance to do anything. All of that pops up as soon as I press enter. ADB and third party software is enabled on my Kindle. ADB even reads my device as:
C:\Program Files (x86)\Android\android-sdk\platform-tools>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
B0C9110232560198 device
Click to expand...
Click to collapse
I'm at a loss now. Any ideas?
EDIT #2: Success! The issue was I was using Root with Bin4ry Revision 33. I should have been using Root with Bin4ry Revision 30. That worked, and I am now ROOT. Mission accomplished. Now the next part of my mission... figuring out how to get TWRP on this thing.
Well, trying to install TWRP is going very wrong. I'm using the tutorial here: http://forum.xda-developers.com/showthread.php?t=2128175
Everything seemed to work until I get to Step 3. I'll enter the commands but it tells me that there is no such directory or something. Something about there not being any "stack." Can't recall. I wanted to ask on the thread there but the site isn't allowing me to post there.
adb push stack /sdcard/ is where the issue occurs. Everything else worked.
I'm at a loss, and the comments don't seem to help on that thread. Please tell me there is an easier method of getting TWRP on this thing.
ERROR:
C:\Program Files (x86)\Android\android-sdk\platform-tools>adb push stack /sdcard
/
cannot stat 'stack': No such file or directory
C:\Program Files (x86)\Android\android-sdk\platform-tools>
Click to expand...
Click to collapse
GogoplataMMA said:
Well, trying to install TWRP is going very wrong. I'm using the tutorial here: http://forum.xda-developers.com/showthread.php?t=2128175
ERROR:
Click to expand...
Click to collapse
That tutorial is for the 8.9. You want the tutorial for the 7". http://forum.xda-developers.com/showthread.php?t=2218796
Sent from my Nexus 7 Flo running CM 11 4.4.2 with ElementalX Kernel using XDA Premium 4 mobile app
LinearEquation said:
That tutorial is for the 8.9. You want the tutorial for the 7". http://forum.xda-developers.com/showthread.php?t=2218796
Sent from my Nexus 7 Flo running CM 11 4.4.2 with ElementalX Kernel using XDA Premium 4 mobile app
Click to expand...
Click to collapse
He's on a 8.9", he just posted in the wrong section. Use the fireflash method from seokhuns tutorial, just don't forget to check the box with red text near it or you will get a nice redscreen brick. Lemme grab a link
Edit: link grabbed! http://forum.xda-developers.com/showthread.php?t=2277105
I used FireFlash, followed the instruction... now I cannot get passed the first "Kindle Fire" logo when I turn the Kindle on. It just freezes at "Kindle Fire" as soon as I turn it on. I can't seem to do anything at all, and it won't connect via USB. Any ideas?
You missed a check box somewhere. If it is indeed a 8.9" kindle this should be fairly easy to fix. Open the device manager and plug the kindle in while it is off, it should briefly appear as a jem device. While it briefly shows up you need to right click it and hit update drivers and navigate to where you would have downloaded and extracted the drivers in my signature, once you manage to install them you just need to run a "fastboot -i 0x1949 getvar product" with the kindle unplugged and off, and then plug it in once it says waiting for device. It should then go into fastboot mode where you can restore from kffa or SRT.
Sent from my Amazon Kindle Fire HD using Tapatalk
stunts513 said:
You missed a check box somewhere. If it is indeed a 8.9" kindle this should be fairly easy to fix. Open the device manager and plug the kindle in while it is off, it should briefly appear as a jem device. While it briefly shows up you need to right click it and hit update drivers and navigate to where you would have downloaded and extracted the drivers in my signature, once you manage to install them you just need to run a "fastboot -i 0x1949 getvar product" with the kindle unplugged and off, and then plug it in once it says waiting for device. It should then go into fastboot mode where you can restore from kffa or SRT.
Sent from my Amazon Kindle Fire HD using Tapatalk
Click to expand...
Click to collapse
It's not working... it won't read at all. Device Manager doesn't see the Kindle at all. And yes it is 8.9". I think it may be bricked now. ;'(
And all because of that stupid update... ughhhh. Sucks!
You should try the command from a Ubuntu live CD/USB if is a lot easier to do from there, if it won't work from there then I would be convinced something may be wrong with the bootloader, but I don't see the bootloader as the problem because if anything it would have just been downgraded and I'm more inclined to thinking the bootimg is corrupted. That can cause odd behavior with the bootloader. Are you positive this is the 8.9" model and not the 7" model?
Sent from my Amazon Kindle Fire HD using Tapatalk
stunts513 said:
You should try the command from a Ubuntu live CD/USB if is a lot easier to do from there, if it won't work from there then I would be convinced something may be wrong with the bootloader, but I don't see the bootloader as the problem because if anything it would have just been downgraded and I'm more inclined to thinking the bootimg is corrupted. That can cause odd behavior with the bootloader. Are you positive this is the 8.9" model and not the 7" model?
Sent from my Amazon Kindle Fire HD using Tapatalk
Click to expand...
Click to collapse
I switched over to my main Windows 7 OS and did what you said. I connected it and it showed for a brief moment in Device Manager, so I quickly loaded the driver and updated. But wen I type the command you gave me, it says <waiting for device>, so I plug it back in and... nothing. At all. Just sits there at <waiting for device>
I'd try Linux, I have several copies of different OS's, but I'm not very good at working with it or using Terminal... I can try that though, but no clue how I'd get ADB or the Kindle to read on it. :\
And yes, 100% it's the 8.9". The resolution is 1200p.
OK the command has to be run while the device is off and disconnected, once it says waiting for device, plug the kindle in and it should work if the drivers are working. Linux is really easy to use with a kindle, it has the fastboot and adb drivers built in natively, only thing you need is the fastboot command from the Ubuntu repos if you are using Ubuntu, believe they were added to the repo in 13.10.
Sent from my Amazon Kindle Fire HD using Tapatalk