Related
First I want to say i really like this forum. It has al lot of info.
And I appoligize for my English, I'm from The Netherlands.
Now my question, ik recently(few days a go) bought a TytnII of a member of this forum (don't know his nick, doesn't matter) but when i came home I noticed that when I connected to my computer via USB, there was no activity at all.
I already tried to hard reset it to factory defaults, but with no luck.
Can any one help me out?
(I already tried to turn off the advanced at usb to pc connections, and also my active sync is okey because it does work for my qtek9100)
thanks very much.
Patrick
Priknr1 said:
First I want to say i really like this forum. It has al lot of info.
And I appoligize for my English, I'm from The Netherlands.
Now my question, ik recently(few days a go) bought a TytnII of a member of this forum (don't know his nick, doesn't matter) but when i came home I noticed that when I connected to my computer via USB, there was no activity at all.
I already tried to hard reset it to factory defaults, but with no luck.
Can any one help me out?
(I already tried to turn off the advanced at usb to pc connections, and also my active sync is okey because it does work for my qtek9100)
thanks very much.
Patrick
Click to expand...
Click to collapse
When u plug it in, what does the led light(the one thet normaly blink green) do?
EDIT:there is a search function on this site. Try to look for "kaiser can not connect activesync" and try to read these threads.
This one looked similar, give it a try: http://forum.xda-developers.com/showthread.php?p=2204391
I already found that post, the problem is not just actuve sync, mycomputer does not respond at al, does not see a divice at the usb port or anything.
Priknr1 said:
I already found that post, the problem is not just actuve sync, mycomputer does not respond at al, does not see a divice at the usb port or anything.
Click to expand...
Click to collapse
do u have a vista or xp? I remember some posts about problems with vista, unfortunately I cant remember where it was.
I have xp, I know about the problems with Vista , but that's not my problem :S
Is it possible to place a new image or something like that? If it is possible where do i find such an image and how do i install it? Is this possible from the SD card?
Priknr1 said:
I have xp, I know about the problems with Vista , but that's not my problem :S
Is it possible to place a new image or something like that? If it is possible where do i find such an image and how do i install it? Is this possible from the SD card?
Click to expand...
Click to collapse
I really dont know what can cause this issue.
To find out about rom flashing, u better start here: http://forum.xda-developers.com/showthread.php?t=369282
when you got your new devcie did you install activsync from the new disc that came with it or did you assume activsync is all the same( as an owner of a htc univwersal i know activsync 4.1 will not operate the tytn 2 you have to use activsync 4.5 also what usb lead are you using try using a lead from a different device, those leads come with pretty much everything i have 6 and i only remember the tytn 2 one being an important one as i use the internet sharing a lot
Mikulec said:
I really dont know what can cause this issue.
To find out about rom flashing, u better start here: http://forum.xda-developers.com/showthread.php?t=369282
Click to expand...
Click to collapse
But is there a chance that this solves my problem or isn't it worth the try?
you said that youd reset to factory settings, so the rom will be as good as itl get in its origional form.
so answer what usb lead you using, is it the one that was in the box with the phone
and
did you install the newer version of activsync from the disc that came from the new phones box
jayjay8585 said:
you said that youd reset to factory settings, so the rom will be as good as itl get in its origional form.
so answer what usb lead you using, is it the one that was in the box with the phone
and
did you install the newer version of activsync from the disc that came from the new phones box
Click to expand...
Click to collapse
i downloaded the newest active sync (4.5) didn't work.
But why does windows xp not react at all when i plug it in? it should at least see new hardware added wright?
With lead you mean the usb-cable? (sorry ain't that good at english)
i think it's the original one, but offcourse because i can't say for sure because i didn't buy it in a store but second hand. He did give me the reciet an the original box and everything so i guess it's also the original cable.
Also i tried 4 diffirent ones.
well im afraid it looks more like a pc issue than a phone issue what os you got on your pc and give me all your specs, and please tell your windows is genuine
U can also try different cable, just to be sure its not the cable that is causing these problems.
maybe they sold you a device with a messed up usb port? maybe 1 of the 3 middle pins of the top set of pins when the device is face up is damaged..thats what happened to mine and you couldnt tell by looking at it...
pazookie said:
maybe they sold you a device with a messed up usb port? maybe 1 of the 3 middle pins of the top set of pins when the device is face up is damaged..thats what happened to mine and you couldnt tell by looking at it...
Click to expand...
Click to collapse
Okey so that is pssible, well I believe it's only 6 months old, so I'll go to the store with it.
@ jayjay8585 and Mikulec
I appriciate your effort for helping out, but if you've read the posts, you would have read that i have an other pda that does work, so not a OS problem(and yes it's a legit OS ) and that i've used several different cables
Is there a way to test if it's just a broken usb ?
Laptop Doesn't See Tilt
I've got the same issue. Got mine second hand only about 2 weeks ago. I was told it was unlocked but it was not. Got the unlock code from AT&T. When I plug the usb cord into the laptop it charges but the computer doesn't recognize new hardware. Any help would be appreciated and what I find out I'll pass on.
Jgreer said:
I've got the same issue. Got mine second hand only about 2 weeks ago. I was told it was unlocked but it was not. Got the unlock code from AT&T. When I plug the usb cord into the laptop it charges but the computer doesn't recognize new hardware. Any help would be appreciated and what I find out I'll pass on.
Click to expand...
Click to collapse
Mine probably has a mainboard roblem because an other firmware was put on, Icontacted HTC and it will be picked up for repairing
I sometimes have a simulair issue... with me it is because the USB connector plugs are slightly out of place (in the phone).
You can bend than back with a thin knife or someting. (dont put to much pressure)
I assume from reading the other posts, you DO have Activesync installed, and you did try a different USB cable?
If so, did you try another USB port on your computer?
This is my first time use WM,so please for give me don't know too much about WM.Yesterday I bought a Chinese Version Diamond,Simple operation I can handle,but when I use USB cable connect to PC,that just charge,no any signal to connect computer,Do someone can tell me what to do?
Thanks
This is my first time use WM,so please for give me don't know too much about WM.Yesterday I bought a Chinese Version Diamond,Simple operation I can handle,but when I use USB cable connect to PC,that just charge,no any signal to connect computer,Do someone can tell me what to do?
Thanks
Probably, the cable is defective. Use original, or try to change to other one.
me 2
I have tyhe same problem....i have 2 cables....both work...both original and bought one.
It was working great before....but now it just loads the battery.
I get the options on my phone screen when i connect the usb cable and whatever i choose the pc doesn't respond at all....just like my phone doesn't exist.
I have the newest activesync installed on windows vista ultimate 32bit (Retail)
Please help me!!!
ediking007 said:
Probably, the cable is defective. Use original, or try to change to other one.
Click to expand...
Click to collapse
I have two cable,both used in other phone is fine,I think the problem not in cable but thanks your help
Th3rm1t3 said:
I have tyhe same problem....i have 2 cables....both work...both original and bought one.
It was working great before....but now it just loads the battery.
I get the options on my phone screen when i connect the usb cable and whatever i choose the pc doesn't respond at all....just like my phone doesn't exist.
I have the newest activesync installed on windows vista ultimate 32bit (Retail)
Please help me!!!
Click to expand...
Click to collapse
How long you bought your diamond?
I bought mine a few days ago....why?
This pisses me off.....i was starting to love this phone but now it's just a piece of sh*t.
Please help me.....anyone!?
Th3rm1t3 said:
I bought mine a few days ago....why?
This pisses me off.....i was starting to love this phone but now it's just a piece of sh*t.
Please help me.....anyone!?
Click to expand...
Click to collapse
I got the exact same problem as well and I'm using the original HTC USB cable. When I connect the phone with the cable to the computer, it only charge the battery. Please help!
I'm trying everything right now....i will tell u if i succeed in fixing this.
YESSSSS.....i fixed it....
go to start menu.....options.....System......power supply
and check the square "when unit power is on don't charge battery with computer....usb"
I read in some Taiwan wedsite,they said ActiveSync can't match XP sp3,and my PC is sp3 =.=",what can I do?
Th3rm1t3 said:
YESSSSS.....i fixed it....
go to start menu.....options.....System......power supply
and check the square "when unit power is on don't charge battery with computer....usb"
Click to expand...
Click to collapse
Congratulation!!!!
But my phone didn't work on this solution,I read some news in Taiwan wed site they said ActiveSync can't match XP sp3,unfortunately my PC is sp3,any friends can tell me what to do?
Thanks a lot
I hope it will work out for u
Good luck.
Th3rm1t3 said:
YESSSSS.....i fixed it....
go to start menu.....options.....System......power supply
and check the square "when unit power is on don't charge battery with computer....usb"
Click to expand...
Click to collapse
Well, I had tried the above but still connect to PC. Please HELP!
I had exactly the same problem. It connects to PC if you put the cable on and off for about 10 times....
I think diamond needs to "heat up" before computer recognice it Not very convenient...
I used to connect my diamond with PC normally. But just suddently it doesn't work now.
Mine did not connect untill I put the CD into my laptop that came with my Diamond. Sounds silly but have you done that?
uniqueboy said:
Mine did not connect untill I put the CD into my laptop that came with my Diamond. Sounds silly but have you done that?
Click to expand...
Click to collapse
I try try
louis138 said:
I try try
Click to expand...
Click to collapse
Lol, worked.
edit: False alarm, didnt work afterall...
woo...very interesting,today I tell to a friend about my Diamond can't link to PC,because my friend have Diamond too,he think many way to help me but all didn't work,at last we talking about the CD,because we was talking on phone,so we just said disk one & two and which file must save in PC.....etc.
Suddenly my friend tell me "put disk two fifth file in your PC".......I open disk two but no fifth file,it just have four fileso tomorrow he will give me him disk to try,I holp this can fix my problem but I have a idea after I try many way today,I think the problem 90% on the firewall but now I am very tired,I will focus on firewall tomorrow
Hey guys,
I have a little problem. I did a bit of searching, but no luck in finding a solution.
Is there any way to access all info like contacts and sms on an AT&T Tilt with a completely broken screen? I would use pim backup, but all i see is a white screen with cracks through it.
Any help much appreciated.
Thanks!
Can you sync it with your PC? That would allow you to transfer the information.
http://cgi.ebay.com/LCD-Touch-Scree...wItemQQptZPDA_Accessories?hash=item4398aec729
One solution. I purchased it already and it came to me in one piece and i am satysfied. Sending is for free.
When I broke my screen I had the same problem. Quick fix is using http://mymobiler.com/ to control your phone through your pc.
To fix and replace the screen, I bought this one
http://www.fonlogix.us/ATampT-Tilt-LCD-Screen_p_70.html
Shipping was very fast. I bought the tool kit from the site also. Makes it 100x easier to open. I believe the total process took me about 45 minutes to take apart and re-assemble.
Good luck. Look on youtube for videos on how to take apart.
When my screen broke I sent it to these guys
jet city devices
They were startlingly fast. I received confirmation of delivery from them and within four hours they sent my fixed devices back out.
Great service. I'm not terribly happy with my kaiser anymore. Windows mobile is just too poorly constructed as an operating system. I don't regret fixing my phone. If I had opted for an iPhone (or at the time an unlocked hero) then I would have been another $500 in the hole.
Thanks guys!
U may install MyMobiler ant than u can see Your PDA screen on Your PC. It may help a little...
you can also try other programs:
SOTI Pocket Controller - to view and controll the PDA via the PC
or
Jeyo Mobile Companion - to directly open your contacts and sms data from the PC and copy them wherever you want
Try myphone from MS http://microsoft.com/myphone
Use with mymobiler to set it up
Hello everyone,
since friday my mobiles touchscreen doesn't react anymore. Don't know why, but it worked totally fine and when I took it to write a message, nothing happened. As you can imagine the phone isn't worth a penny without it's touchscreen, so I took an old one, put in my sim and am now using that one.
Here comes my problem, of course all my contacts are saved in my phone and there are several mms and so on, which I'd like to save to my pc.
Is there any change of getting them out there? I don't know, something like a remote control for my device? To use it from my pc or something like that? I'm open to any ideas.
Thanks a lot
Alex
edit: The leftovers of my device still work perfectly! It turns around the screen, when putting it on the side, opens the Windows Start Windows, when pushing the button etc.
Don_Alex said:
Hello everyone,
since friday my mobiles touchscreen doesn't react anymore. Don't know why, but it worked totally fine and when I took it to write a message, nothing happened. As you can imagine the phone isn't worth a penny without it's touchscreen, so I took an old one, put in my sim and am now using that one.
Here comes my problem, of course all my contacts are saved in my phone and there are several mms and so on, which I'd like to save to my pc.
Is there any change of getting them out there? I don't know, something like a remote control for my device? To use it from my pc or something like that? I'm open to any ideas.
Thanks a lot
Alex
edit: The leftovers of my device still work perfectly! It turns around the screen, when putting it on the side, opens the Windows Start Windows, when pushing the button etc.
Click to expand...
Click to collapse
My Mobiler (free) or Pocket Controller (pay) allow you to control the device from your PC.
You can use M$ MyPhone to backup your SMS, etc.
I suggest doing a hard reset to try to get your screen back to verify its a hardware issue.
Okay, thanks for your fast answer. Loaded the programm, but it requires to start my mobile in active sync mode. But that's nearly impossible to me, cause everytime i plug in the usb cable, it asks me, to start as active sync, disk drive or internet sharing. For bad luck the default is disk drive and I can't change it to active sync. Any ideas?
Thanks
Don_Alex said:
Okay, thanks for your fast answer. Loaded the programm, but it requires to start my mobile in active sync mode. But that's nearly impossible to me, cause everytime i plug in the usb cable, it asks me, to start as active sync, disk drive or internet sharing. For bad luck the default is disk drive and I can't change it to active sync. Any ideas?
Thanks
Click to expand...
Click to collapse
Yes, that's a hard place to get out of.
I was just helping another user with this same issue.
First, please confirm you've performed a hard reset.
The only other thing to attempt is to load your stock ROM onto the root of your storage card and try to reflash that way.
Lucky for me, I finally had the great idea of taking out my storage card and then the disk drive option isn't given anymore. Thanks for helping such a dork like me out!!!
Don_Alex said:
Lucky for me, I finally had the great idea of taking out my storage card and then the disk drive option isn't given anymore. Thanks for helping such a dork like me out!!!
Click to expand...
Click to collapse
Ofcourse! That was a great idea.
It certainly makes sense but I never thought of it.
That's good to know for future reference. Thanks!
Mine did this once to me after I put in a new game. I removed the stylus pen which caused the screen to light up long enough to use the touch features. I was working on a doc file and REALLY needed to save it.. a soft reset and haven't had the issue since. Figured it was just a fluke so never mentioned it before now.
I have strange issue that's driving me crazy when i need it. I am user of GingeDX (v030 shakira stock). Several days ago i updated the custom rom with the latest version (v030) and installed GAPPS. Yesterday i plugged my USB in my PC to add the fix for GalleryDX (which was bugged and hotfix was avalable in the topic). When i connected my phone with usb and then to my pc (on my phone it said its connected) but nothing was showing either on my desktop or in Computer. I'd also want to add that the same day - Sony PC Companion required some update and i did it.
Then i tried something else to use the usb connect via Sony PC Companion and it worked only to open the sd card so i can place the GalleryDX fix i was talking about above. I was thinking that it's some kainda bug that will be away when i restart my pc but not. Then i restarted my phone, nothing again. Then erased all data from my sd card but nothing again. My last option was to wipe data/reset to factory via ClockworkMod but nothing again....
So my problem is that when i plugin my usb to phone and pc nothing is showing but my phone is saying its connected to pc. Days before everything was okay.
I also want to add that i use Windows Vista 32 bit Home Premium SP2 is someone is in need of that info.
I really need some help about that because it's anoying.
Thanks in advance
ADDOriN
Did you touch the green android logo on the usb connection page?
When you touch it the usb mass storage is activated..
CtrlAltDelIrl said:
Did you touch the green android logo on the usb connection page?
When you touch it the usb mass storage is activated..
Click to expand...
Click to collapse
Ofc i did. Thats where its saying its connected but its not showing a thing on my pc.
ADDOriN said:
Ofc i did. Thats where its saying its connected but its not showing a thing on my pc.
Click to expand...
Click to collapse
The problem is not with the rom, but with ur usb port...there could be two options available, either dont have the drivers installed,(usb), or ur cable is malfunctioning...
Sent from my X8 using xda app-developers app
HemdonG said:
The problem is not with the rom, but with ur usb port...there could be two options available, either dont have the drivers installed,(usb), or ur cable is malfunctioning...
Sent from my X8 using xda app-developers app
Click to expand...
Click to collapse
His usb cable and port are fine, if they weren't he wouldn't be able to connect.
Wait some time if you hadn't, it may take a while.
If you have adb set on your computer run this command:
adb devices
If nothing shows up the problem are the drivers...
If that's not the case then try with another sd card and see if it works
You might have a virus in your PC. Try connecting your phone in another computer that has a good anti-virus installed.
Question: are you able to see the device in your PC but not the files? Or, nothing is showing?
ADDOriN said:
Ofc i did. Thats where its saying its connected but its not showing a thing on my pc.
Click to expand...
Click to collapse
You make no mention of it in your long post. How are we supposed to guess?
And you say "ofc i did" when it's not even obvious.
Bet you still havn't touched the green android!
Some people just can't see help when it's staring them in the face.
These people use Vista!!
CtrlAltDelIrl said:
You make no mention of it in your long post. How are we supposed to guess?
And you say "ofc i did" when it's not even obvious.
Bet you still havn't touched the green android!
Some people just can't see help when it's staring them in the face.
These people use Vista!!
Click to expand...
Click to collapse
lmao. vista. i missed them fangs. :thumbup:
@op: most people here have already given possible solutions. have you tried it on a different pc and/or a different cable?
[cAs]
CtrlAltDelIrl said:
You make no mention of it in your long post. How are we supposed to guess?
And you say "ofc i did" when it's not even obvious.
Bet you still havn't touched the green android!
Some people just can't see help when it's staring them in the face.
These people use Vista!!
Click to expand...
Click to collapse
@CtrlAltDelIrl Mate i'm really sorry about leaving only "ofc i did" but i was in a hurry and really had no time. Also i'm not here to argue i just wanted to tell you that i did. Thanks for your help and sorry if there is anything.
@stamatis Thank You for the "other SD Card" solution. I took my second SD Card from my phone's box and it worked. Then i attached my old sd card (that was not working so far) and it ALSO worked. I did it many times and now it's working...... quite strange i think that second card and fix that but it did. Awesome! Thank You.
@Everyone else - Thank you guys for the responce about my issue. Now everything is fine If i have any more questions i'll ask ahead.
PS. Yeah i know Vista. I hate it more that you imagine. I know how to install new one but i'm not into intalling everything all over again. I just installed new OS on my second PC so yeah.... its pain.
CtrlAltDelIrl said:
You make no mention of it in your long post. How are we supposed to guess?
And you say "ofc i did" when it's not even obvious.
Bet you still havn't touched the green android!
Some people just can't see help when it's staring them in the face.
These people use Vista!!
Click to expand...
Click to collapse
No offence. But next time dont deduce somethings like this, if u cant help.
Sent from a god in Heavens