Hi. I have compiled a kernel for your device. The kernel is only for tests.
I am not responsible for your broken devices and deadly sd-cards
Click to expand...
Click to collapse
Features
Dualboot,
SWAP,
DroidWall support,
CM7 and CM9 support
Governors
Lazy,
ondemand,
interactive,
interactivex,
perfomance,
smartassv2,
powersave,
userspace,
conservative,
SmartassH3,
intellidemand2,
intellidemand,
darkside,
AssWax,
agresive,
powercats,
Frequencies
156,
312,
624,
780,
832,
936,
1040
Schedulers
noop,
cfq,
zen,
vr,
deadline
P.S. I have created an apk, which can switch between ROMS (It is a test version). There are activity and widget.
Sources: https://github.com/angpysha/tassve_kernel
link Currpted
myaservip said:
link Currpted
Click to expand...
Click to collapse
Link works, but file sharing does not support all browsers..
im on cyanmobile(based on biel's cm7) now can i install it directly? n is oc really affects on performance? i was heard that bcm21553 cant be overclocked n oc kernels actually dont boost performance.
Galaxy Pop Plus'ımdan Tapatalk 2 ile gönderildi.
burak144 said:
im on cyanmobile(based on biel's cm7) now can i install it directly? n is oc really affects on performance? i was heard that bcm21553 cant be overclocked n oc kernels actually dont boost performance.
Click to expand...
Click to collapse
As an ordinary kernel, through CWM. At me now installed two CMX (DualBoot).
Maximum performance on 936.
From a person who does not even have a PC?
ive just installed this kernel. 1248 mhz isnt stable, it lags too much, unusable. but 1040 mhz is stable n so fast. better performance than biel's kernel, gear kernel n cyanus kernel. good work.
edit: root doesnt work. using superuser's latest version. i think there is a problem with the binary. will try to root again.
Galaxy Pop Plus'ımdan Tapatalk 2 ile gönderildi.
burak144 said:
ive just installed this kernel. 1248 mhz isnt stable, it lags too much, unusable. but 1040 mhz is stable n so fast. better performance than biel's kernel, gear kernel n cyanus kernel. good work.
edit: root doesnt work. using superuser's latest version. i think there is a problem with the binary. will try to root again.
Click to expand...
Click to collapse
At me root work on CMX and CM 9.
ive tried to root it n when i rebooted phone it was unusable. it was responding sooo late. then ive installed biel's kernel but it doesnt solve the problem. so ive restored my backup. i dont know wich caused it, rebooting or rooting
Galaxy Pop Plus'ımdan Tapatalk 2 ile gönderildi.
burak144 said:
ive tried to root it n when i rebooted phone it was unusable. it was responding sooo late. then ive installed biel's kernel but it doesnt solve the problem. so ive restored my backup. i dont know wich caused it, rebooting or rooting
Galaxy Pop Plus'ımdan Tapatalk 2 ile gönderildi.
Click to expand...
Click to collapse
Uae supersu to make full unroot then flash root again
myaservip said:
Uae supersu to make full unroot then flash root again
Click to expand...
Click to collapse
didnt u read my post? i say it doesnt respond after rebooting.
Galaxy Pop Plus'ımdan Tapatalk 2 ile gönderildi.
burak144 said:
didnt u read my post? i say it doesnt respond after rebooting.
Galaxy Pop Plus'ımdan Tapatalk 2 ile gönderildi.
Click to expand...
Click to collapse
Omg sorry
I made unroot script
---------- Post added at 08:44 AM ---------- Previous post was at 08:41 AM ----------
Here
http://www.mediafire.com/?mrcy23odcjz5197
deep sleep not working for me
thebiggboss180 said:
deep sleep not working for me
Click to expand...
Click to collapse
Install this app and you will see what app use a battery.https://play.google.com/store/apps/details?id=com.uzumapps.wakelockdetector
If it is not working try to do clean install.
thebiggboss180 said:
deep sleep not working for me
Click to expand...
Click to collapse
At me work.
i just removed the ext 2 partiotion that used by link2sd and formated it to ext 4 and now everything working fine and performance better than before :good:
can u make the 1.1 verson for this device ?
thebiggboss180 said:
can u make the 1.1 verson for this device ?
Click to expand...
Click to collapse
Soon to be..
Maybe this week..
Gisha 7 said:
Soon to be..
Maybe this week..
Click to expand...
Click to collapse
Rule 14.create Only One User Account
Why U Write T-H-A-N-k-s Just Press It <3
---------- Post added at 02:21 PM ---------- Previous post was at 02:21 PM ----------
myaservip said:
Rule 14.create Only One User Account-Reported To Fourm Adminstrator
@moderators u can also have a look
Why U Write T-H-A-N-k-s Just Press It <3
Click to expand...
Click to collapse
Why U Write T-H-A-N-k-s Just Press It <3
myaservip said:
Rule 14.create Only One User Account
Click to expand...
Click to collapse
Guy angpysha from Ukraine, I'm from Russia.
angpysha speaks English better than I, but you are worse than I am..
As I told you, I communicate with him.
Adding a screen that we communicate with him.
Is paste in translator:
Капец. Меня так бесят такие нубы. Ничего не умеют, и еще что-то доказывают. Кстати, я постараюсь до конца недели сделать стабильное ядро для миника (поскольку у меня сейчас учёба)
Click to expand...
Click to collapse
@angpysha
Can you add double tap to wake up the phone like alin.p kernel for galaxy mini?
Inviato dal mio GT-S5570I con Tapatalk 2
Related
This is my kernel based on 2.2.2 kernel released by LG! This kernel has LG touchscreen fix and I've added OC from HERE, ext4 and btrfs support (btrfs is experimental) and VPN support (tun.ko module).
If you would like to use this kernel: http://www.multiupload.com/H3HQT7WMSY
Do not forget to make nandroid backup first.
Packaged in koush's anykernel for compatibility with any rom.
PS: Thanks to Mik_os for his patience
PPS: With my kernel I managed to use 806Mhz and it's works very well and it's stable for my phone.
Could you define optimised OC? How is it different from the OC supported by other kernels.
Thanks.
Sent from my LG-P500 using XDA App
socialdistortion said:
Could you define optimised OC? How is it different from the OC supported by other kernels.
Thanks.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
I used a new patch and this one, modify only 2 kernel files!
I can go up to 806MHz, which is really the top frequency my phone can handle. And amazingly enough, the cpu spike isn't there What changes did you make?
Work like a charm, but lack insteractive mode in setcpu and when you put it in power mode it stay at max freq. Thanks for your work buddy.
hope you include this on your next ROM release.... more power to you sir!
Dook - is it the same updated OC code that Mik used in his latest 2 builds ?
bluviper said:
hope you include this on your next ROM release.... more power to you sir!
Click to expand...
Click to collapse
#fenice mount this kernel!
Zerobarat1 said:
Dook - is it the same updated OC code that Mik used in his latest 2 builds ?
Click to expand...
Click to collapse
Oh yes!
Can not be used in the ROM 2.3.3 Mik_os?
segyto said:
Can not be used in the ROM 2.3.3 Mik_os?
Click to expand...
Click to collapse
Arrrrgh this does not contain any of the patches needed by Gingerbread to function at least remotely fine .
Tried this kernel with LOLv1.2(froyo2.2) ROM,,Doesnt even stand up to SIppolo's super optimised kernel..After flashing this rom,phone got a little slower but like u said no more cpu spikes !!! THnx for posting
With my kernel I managed to use 806Mhz and it's works very well and it's stable for my phone.
so this actually worked? would flash and and test it on some games. and would post my feedback after. Thnx!
peacekeeper05 said:
so this actually worked? would flash and and test it on some games. and would post my feedback after. Thnx!
Click to expand...
Click to collapse
Anyway, i prefer use my phone at 729MHz or 768MHz!
yep.
confirmed, cpu spike is not there.
thanks!
Can you define which is the LG touch fix? I thought that LG never released a fix for the touch bug...
yelo3 said:
Can you define which is the LG touch fix? I thought that LG never released a fix for the touch bug...
Click to expand...
Click to collapse
in 2.2.2 v10R kernel LG released a fix for the touch bug!
sarfaraz1989 said:
Tried this kernel with LOLv1.2(froyo2.2) ROM,,Doesnt even stand up to SIppolo's super optimised kernel..After flashing this rom,phone got a little slower but like u said no more cpu spikes !!! THnx for posting
Click to expand...
Click to collapse
can anyone confirm this?
is it just for 2.2 or is 2.2.2 affected?
Can I flash this kernel into my AmberHome ROM (2.2)?
it has so small transitions in speed like from 600Mhz u cud scale upto 645Mhz..I like this
EDIT: yes u can check it out on any rom..It will work on any rom as it is packages like koush's style
hi .... has anyone tried over clocking samsung galaxy ace....
i heard it can go up to 1.2ghz
digkong said:
hi .... has anyone tried over clocking samsung galaxy ace....
i heard it can go up to 1.2ghz
Click to expand...
Click to collapse
you need a special kernel first
even the galaxy mini caan be overclocked to 1.3 Ghz!!!but y not the galaxy ace
galaxyaceking said:
even the galaxy mini caan be overclocked to 1.3 Ghz!!!but y not the galaxy ace
Click to expand...
Click to collapse
Dude.. the Ace can be overclocked, it just needs a modded Kernel. If you're so eager why don't you make that yourself..
i think sir nprussell will make an OC kernel for us
galaxyaceking said:
even the galaxy mini caan be overclocked to 1.3 Ghz!!!but y not the galaxy ace
Click to expand...
Click to collapse
You mean Galaxy 3 aka i5800 aka "Apollo", don't you?
guyz dont hope from 1 developer so much..!!
is there any phone which has same configuration as ace..???
SAD
Its really sad that there is less support for Ace.. No Cyanogen Mod... No overclocking... where others are getting better support..
daydreamer1987 said:
Its really sad that there is less support for Ace.. No Cyanogen Mod... No overclocking... where others are getting better support..
Click to expand...
Click to collapse
The good guys left because of idiots in this forum , they only know how to ask when and don't know when to be patient .
If I'm an Ace developer I would've done the modules .
Sent from my Awesome Ace with fla.sh ROM and TAPATALK
There was a project to do it. But think it was dropped.
Sent from my GT-S5830 using XDA Premium App
Testing OC Speed
Using galaxy ace and my current stable OC is 921 MHz (quite hot when charging and using wi-fi at the same time) using paranoid android ROM galaxyics kernel ver 2.6.35.7
I'll keep it updated... (no tweaks YET)
*update* After reboot it is no longger becoming hot so it's safe
*update 2* 940 Mhz is safe (so far)
jamespurnama1 said:
Using galaxy ace and my current stable OC is 921 MHz (quite hot when charging and using wi-fi at the same time) using paranoid android ROM galaxyics kernel ver 2.6.35.7
I'll keep it updated... (no tweaks YET)
*update* After reboot it is no longger becoming hot so it's safe
Click to expand...
Click to collapse
Why on holy earth did you revive a dead thread?:what:
Back from the dead..
Ok..So that this dead thread is resurrected, why don't we ask the mod to lock it?
Woah.....The OP expects the Ace to be overclocked to 1.2 Ghz. We would be having a burning plastic brick in our hands...lol...!
Sent from my GT-S5830 using Tapatalk 2
jamespurnama1 said:
Using galaxy ace and my current stable OC is 921 MHz (quite hot when charging and using wi-fi at the same time) using paranoid android ROM galaxyics kernel ver 2.6.35.7
I'll keep it updated... (no tweaks YET)
*update* After reboot it is no longger becoming hot so it's safe
*update 2* 940 Mhz is safe (so far)
Click to expand...
Click to collapse
940MHz is safe?
How about stable?
Sometimes by just running a benchmark i will reboot or FC
Sent from my GT-S5830L using xda premium
What do you really want to do with overclocking. and risking your phone. 800 mhz is slow, I agree, but its not bad enough for daily use.
The highest stable you should risk up to is 883 mhz.
Even 921 mhz is stable.
But higher than that is just overworking the processor.
If you really want your phone to be fast. Its not only done by overclocking. You should look over to scripts like Adrenaline Engine and stuff. Maybe even setting up zram, to up to 18%.
But risking your processor. Nope. Don't do it.
side_effect said:
Why on holy earth did you revive a dead thread?:what:
Click to expand...
Click to collapse
I am really interested in Overclocking, and rather than making a new thread i'll just revive this thread
---------- Post added at 07:32 PM ---------- Previous post was at 07:23 PM ----------
Tovagulet said:
940MHz is safe?
How about stable?
Sometimes by just running a benchmark i will reboot or FC
Sent from my GT-S5830L using xda premium
Click to expand...
Click to collapse
940 MHz is safe, but when my ace lags, it reboots (i was playing fruit ninja in multi-tasking with browser)... So i'm trying to find out why... I've set the min and max at 940 MHz, so the CPU is stable at 940 MHz...I'm trying to test 960 MHz, but it shutdown eventually and didn't gives me a bootloop when i set to 960, please be aware that i'm using maclaw's kernel and his ROM... I'm not responsible for any damage if you did what I did, but if you want to try do a NAND Backup then try it... if it goes with a bootloop simply wait, a few boots and the CPU will be back to 800 MHz, if it didn't simply reset it...
*update* gives me bootloop after a few minutes
jamespurnama1 said:
I am really interested in Overclocking, and rather than making a new thread i'll just revive this thread
---------- Post added at 07:32 PM ---------- Previous post was at 07:23 PM ----------
940 MHz is safe, but when my ace lags, it reboots (i was playing fruit ninja in multi-tasking with browser)... So i'm trying to find out why... I've set the min and max at 940 MHz, so the CPU is stable at 940 MHz...I'm trying to test 960 MHz, but it shutdown eventually and didn't gives me a bootloop when i set to 960, please be aware that i'm using maclaw's kernel and his ROM... I'm not responsible for any damage if you did what I did, but if you want to try do a NAND Backup then try it... if it goes with a bootloop simply wait, a few boots and the CPU will be back to 800 MHz, if it didn't simply reset it...
*update* gives me bootloop after a few minutes
Click to expand...
Click to collapse
In case you didn't know,there are a lot of other new threads which discuss about OCing...All the info in this thread is obsolete.
Hey guys I dunno why all devs use 604MHz as the default frequency for their roms. I wanna how how to lock a kernel to a max frequency of 600MHz. Can anybody help me?
u can set that frequency ur self by usin "cpu frills"
avilove4u said:
u can set that frequency ur self by usin "cpu frills"
Click to expand...
Click to collapse
600MHz isn't available. below 604 is 595mhz..
Boss.bhavesh2 said:
600MHz isn't available. below 604 is 595mhz..
Click to expand...
Click to collapse
I do think that the values are preconfigured when the devs compile their kernel. Not sure though why exact values cannot be set such as 600 or 700 Mhz as I don't know how to compile one..
avilove4u said:
u can set that frequency ur self by usin "cpu frills"
Click to expand...
Click to collapse
I think it call no-frill cpu control
Sent from my GT-S5570 using Tapatalk 2
kitrax59 said:
I do think that the values are preconfigured when the devs compile their kernel. Not sure though why exact values cannot be set such as 600 or 700 Mhz as I don't know how to compile one..
Click to expand...
Click to collapse
I found a guide to compile kernel on the fit forum I thinl it will work on our rom with some change
http://forum.xda-developers.com/showthread.php?t=1467149
Sent from my GT-S5570 using Tapatalk 2
try This one, but this built from cm9 kernel sources(for cm9) which stunned white exist, wait bout 8-10sec to boot homescr.
(if stuck try to remove tass.rle,on latest cm9 kernel there is no tass.rle)
page table change (eg.528>600>644>etc,et).
im no expert, please DWYOR.
aprizND said:
try This one, but this built from cm9 kernel sources(for cm9) which stunned white exist, wait bout 8-10sec to boot homescr.
(if stuck try to remove tass.rle,on latest cm9 kernel there is no tass.rle)
page table change (eg.528>600>644>etc,et).
im no expert, please DWYOR.
Click to expand...
Click to collapse
Will this work on cm7? I wanted mebitek's kernel @ stock 600mhz. I don't have linux i don't know how to mod a kernel in windows..
Sent from my GT-S5570 using XDA App
Galpop+ kernel Build1 by Fedy:
http://www.4shared.com/zip/xF2nVgFv/Galpop_kernel1.html
Description: Still stock kernel
*
Galpop+ kernel by me (edits repencis kernel):
http://www.4shared.com/zip/SRZgi4ZR/R_Final-kernelmodules.html
Description: Support a2sd darktremor, droidwall
*
Galpop+ kernel build2 by Fedy:
http://www.mediafire.com/?rw4bigimnep7n37
Description: added 3 freq, 17 cpu, io 5, swap
*
Edit Kernel build2 by me:
http://www.4shared.com/zip/kM9rRyB0/Galpop_Kernel_build2.html
Description: added 3 freq, 17 cpu, io 5, swap, a2sd darktremor, droidwall
and you must install first a2sd from http://forum.xda-developers.com/showthread.php?t=715940
*
Do with your own risk!
Hello, I have a Samsung Galaxy Mini Plus ( S5570I ) and aI want to install a kernel for ( STOCK ROM ).
Which one of those is the best for max performance ( that contain ondemand guvernor ) and for max battery life?
From what I read, I think the 3rd is the best, now I wait you opinion.
bogdan99999 said:
Hello, I have a Samsung Galaxy Mini Plus ( S5570I ) and aI want to install a kernel for ( STOCK ROM ).
Which one of those is the best for max performance ( that contain ondemand guvernor ) and for max battery life?
From what I read, I think the 3rd is the best, now I wait you opinion.
Click to expand...
Click to collapse
Yes u can use 3rd kernel
Thaks!!:highfive:
Thanks for the kernels
How do i use these kernels?
im new ahout kernels. And im on stock .
Sent from my GT-S5570I using xda app-developers app
dbtvillanueva said:
How do i use these kernels?
im new ahout kernels. And im on stock .
Click to expand...
Click to collapse
Just use 3rd kernel.. But if u want support a2sd choose 4th kernel.. And dont forget to patition sdcard with ext2 and install dtta2sd
good kernel,waiting a good rom too
Sent from my GT-S5570I using xda app-developers app
is this for any kind of s5570i? sorry for asking this because its my frist time going to do this and i haven't seen a phone model like my phone.
s5570IDXKF2.
mickeyzkun said:
is this for any kind of s5570i? sorry for asking this because its my frist time going to do this and i haven't seen a phone model like my phone.
s5570IDXKF2.
Click to expand...
Click to collapse
Yea this is for GT-S5570I or some people called this "Samsung Galaxy Pop Plus".
Sent from my GT-S5570I using xda app-developers app
i see thanks but when i turn on my phone its only samsung galaxy mini
mickeyzkun said:
i see thanks but when i turn on my phone its only samsung galaxy mini
Click to expand...
Click to collapse
You should see the GT-S5570I under the mini .
GT-S5570= Mini or Pop
GT-S5570I= Mini plus or Pop plus
Sent from my GT-S5570I using xda app-developers app
yah i saw Samsung Galaxy Mini and under the mini is GT-S5570I. in my classmate phone the plus is written but mine was not.
btw what is kernel and what does it do?
kissingmylove said:
good kernel,waiting a good rom too
Sent from my GT-S5570I using xda app-developers app
Click to expand...
Click to collapse
Go to http://forum.xda-developers.com/showthread.php?p=29340182#post29340182
mickeyzkun said:
yah i saw Samsung Galaxy Mini and under the mini is GT-S5570I. in my classmate phone the plus is written but mine was not.
btw what is kernel and what does it do?
Click to expand...
Click to collapse
U can open Google
i already look there but i dont understand it thats why i ask for better explanation.
mickeyzkun said:
i already look there but i dont understand it thats why i ask for better explanation.
Click to expand...
Click to collapse
Maybe u can read this http://www.androidcentral.com/android-z-what-kernel
Ok, I have Repencis 3.5 installed, with the last PX kernel, no CWM installed. I'd like to go back to Repencis kernel. Is this the right one? Why is it build2? Is it more advanced than the one included in the Repencis ROM?
Imron02 said:
Galpop+ kernel build2 by Fedy:
http://www.mediafire.com/?rw4bigimnep7n37
Description: added 3 freq, 17 cpu, io 5, swap
Click to expand...
Click to collapse
Also, how do I install it?? I tried with both stock recovery and CWM. It shows it's flashing but then, after reboot, i still have the PX kernel. Any idea?
Miche1asso said:
Ok, I have Repencis 3.5 installed, with the last PX kernel, no CWM installed. I'd like to go back to Repencis kernel. Is this the right one? Why is it build2? Is it more advanced than the one included in the Repencis ROM?
Also, how do I install it?? I tried with both stock recovery and CWM. It shows it's flashing but then, after reboot, i still have the PX kernel. Any idea?
Click to expand...
Click to collapse
Bulid2 have more fiture than the Build1 such as a2sd.. This kernel from fedy kusuma (repencis developer)..
I don't know how to install if u still have the px kernel because i not install previous px kernel .. Maybe u can use odin..
Imron02 said:
Maybe u can read this http://www.androidcentral.com/android-z-what-kernel
Click to expand...
Click to collapse
Waiting for new roms
I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE BY FLASHING THIS KERNEL
Hi all, i was build kernel for cooper ics based, and have tested by xxxMADxxx
Feature :
Kernel update to 2.6.35.14
800MHz max ,128 min set default with Ondemand and noop for i/o sched
Running All Scripts in /system/etc/init.d
Tweak on Ramdisk
Deep sleep for battery life
UnderVolt module
Overclock support with added some clock
BLN support
swap and ext4 support
added more and more governors scaling & iosched
How to :
put cooper-2.6.35.14-aroma.zip to sdcard
go to recovery mode
mount /system
then flash that zip
Thank's to :
Amarulz to make Aroma installer
TJ Style,Squadzone , Phiexz and Delano (for my reference)
xxxMADxxx to be tester
BNC Family
Link :
http://www.mediafire.com/download.php?zsl6ea83ecvx5j3
PLEASE DON'T MIRROR MY LINK
Tell me if you find bug :good:
reserved
Downloaded will try on nim's MIUI 2.8.3
Sent from my GT-S5830 using xda app-developers app
hi
i read the feature list but still can you tell me howz battery life with this kernal...and is all features in rc1 works with this kernal..?
Pank789 said:
hi
i read the feature list but still can you tell me howz battery life with this kernal...and is all features in rc1 works with this kernal..?
Click to expand...
Click to collapse
i was include deep sleep on my kernel that can make better for battery life ..
that kernel was tested on cm9 rc1 you can see on SS
Nice!
Still 2.6.35 but not bad at all.
What about 920 mhz OC version?
Plus what governors available??
masterex567 said:
Nice!
Still 2.6.35 but not bad at all.
What about 920 mhz OC version?
Plus what governors available??
Click to expand...
Click to collapse
yup cause i see 2.6.35.14 stable version on kernel.org ..
cmiiw ..
i was added 921 MHz clock not 920MHz maybe that more stable ..
and for governors that to much if i'm write here ...
maybe 21 governors on my kernel ...
you said that you have fixed deep sleep
so does that include the fixing of the deep sleep problem after using camera app and Bluetooth?
please reply dude.
Ace King 34 said:
you said that you have fixed deep sleep
so does that include the fixing of the deep sleep problem after using camera app and Bluetooth?
please reply dude.
Click to expand...
Click to collapse
yup cause deep sleep script include on my kernel not in init.d ..
maybe you can try this kernel and give me report about that ..
cause i don't have device but on my gio that work
There's such a governor as DARKSIDE and msm7k ? Care to explain ?
"Friends forever." - Ventus
CallMeVentus said:
There's such a governor as DARKSIDE and msm7k ? Care to explain ?
"Friends forever." - Ventus
Click to expand...
Click to collapse
you can search about that on google
i don't know what specify about that scaling governor but that good governor
Oh Great!.
Will test asap.
I'm not running cm9 now, but i'll flash it to try this out.
Good work. :good:
I've tested the kernel on latest rc1 but after 3 reboots deep sleep wasn't working after all...
Working great on MIUI!
Sent from my GT-S5830 using xda premium
Confirming what has been said before, this kernel breaks deep sleep, clean install and fresh boot and no deep sleep.
Sent from my GT-P1000 using Tapatalk 2
PsychOlli said:
I've tested the kernel on latest rc1 but after 3 reboots deep sleep wasn't working after all...
Click to expand...
Click to collapse
Stilm said:
Confirming what has been said before, this kernel breaks deep sleep, clean install and fresh boot and no deep sleep.
Sent from my GT-P1000 using Tapatalk 2
Click to expand...
Click to collapse
ive tried this kernel for two rom (MIUIV4 & CM9 RC1) and i confirmed to you about DEEP SLEEP IS WORKING but after using CAMERA,yes its not work...Must reboot to make that work again..
Tried this kernel on CM9 RC1 and i must say I was impressed with it.
deep sleep works.
Ram disk mod is cool.
and the governors are also a lot in number
Ace King 34 said:
Tried this kernel on CM9 RC1 and i must say I was impressed with it.
deep sleep works.
Ram disk mod is cool.
and the governors are also a lot in number
Click to expand...
Click to collapse
nice to know that sir ...
xxxMADxxx said:
ive tried this kernel for two rom (MIUIV4 & CM9 RC1) and i confirmed to you about DEEP SLEEP IS WORKING but after using CAMERA,yes its not work...Must reboot to make that work again..
Click to expand...
Click to collapse
Didn't use anything at all, flashed and let it stand by. After about 1hr went to check on cpu spy (only app installed) and deep sleep didn't kick in. Guess that was me then.
Sent from my GT-P1000 using Tapatalk 2
Stilm said:
Didn't use anything at all, flashed and let it stand by. After about 1hr went to check on cpu spy (only app installed) and deep sleep didn't kick in. Guess that was me then.
Sent from my GT-P1000 using Tapatalk 2
Click to expand...
Click to collapse
Same thing here